REPAIRS TO KITCHEN TOILETS CLEANING OF WATER TANKS INTERNAL WATER SUPPLY SANITORY FITTINGS AND ALLIED WORKS OF INSPECTION ORGANISATION AT AUNDH UNDER GE MH AND RH KIRKEE

Amount

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

S & F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors.

Fixing only tubes of 15 mm bore, any grade, to walls and ceiling or laying in floors.

S & F 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors.

Fixing only tubes of 20 mm bore, any grade, to walls and ceiling or laying in floors.

Cutting chases, pinning in brick walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth , all as specified

Dismantling water tanks of capacity exc 250 litres but n exc 500 litres and removing to store all as specified

Dismantling water tanks of capacity exc 500 litres but n exc 1000 litres and removing to store all as specified

Dismantling water tanks of capacity exc 1000 litres but n exc 2000 litres and removing to store all as specified

S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litre hoisted and fixed in position as specied an directed.

S & F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 litre hoisted and fixed in position as specied an directed.

S & F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 2000 litre hoisted and fixed in position as specied an directed.

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S & F in repair ball valves suitable for 20 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed, (minimum weight 210 gms) all as specified and directed.

S & F in repair ball valves suitable for 15 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed, (minimum weight 455 gms) all as specified and directed.

S&F in repairs stop valves, 15 mm obtained from taking down GI pipes, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repairs stop valves, 20 mm obtained from taking down GI pipes, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S & F in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts all as specified and directed.

S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts all as specified and directed.

Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface and M&L for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. Make: PIDILITE or equivalent

Making hole and M&L for fixing thr metallic packer for hydrophobic PU foam and Sealer as per manufacturers specification. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. Make: PIDILITE or equivalent

M&L for the tile joint chemical cleaning and re-grouting carefully by washing the existing tille with heavy duty tile cleaner preferbly of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, or equivalent , curing , cleaning the surface etc, complete all as directed by Engr-in-Charge and as per the sample done at ground level.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed in CM 1:6 all as specified.

M&L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick plastering in cm 1:4 all as specified.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed in CM 1:6 all as specified.

S&F in repairs Wash basins, vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing and supply of waste pipe all as specified

S&F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified.

S&F in repairs 15mm dia fency type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repairs 15mm dia bore fency type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs CP two way bib taps screwed for iron pipe and fixed necessary fitting with and incl PVC connection all as specified and directed

S&F in repair Vitreous china urinal full stall type & union for discharge pipe including Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) but excluding flushing cistern, flush pipe & waste pipe but fixing only automatic flushing cistern with bracket flush pipe etc complete all as specified and directed.

Taking down drain pipes (any size or pattern), including all fittings, T, bends,etc., including cleaning or refixing (measured overall as fixed along the centre line over fitting and accessories)

S&F PVC (SWR) pipes 110 mm dia single sockets, in any length rubber ring joints, laid in trenches or in floor all as specified and directed.

S&F PVC (SWR) 110mm dia bends any radius all as specified and directed.

S&F PVC (SWR) branch 110mm bore piecs, single ( single Y ) equal or unequal all as specified and directed.

S&F PVC (SWR) junction110mm bore single ( single t) equal or unequal all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single sockets , in any length rubber ring joints, laid in trenches or in floor all as specified and directed.

S&F PVC (SWR) 75 mm dia bends any radius all as specified and directed.

S&F PVC (SWR) branch 75 mm bore piecs, single ( single Y ) equal or unequal all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S & F in repairs wash down water closet ( European type) excluding fixing bolts, flushing cistern, & flush pipe but including connecting to existing out let pipe etc all as specified and directed.

S & F in repairs Plastic seat cover to EWC with aluminium hinging device all as specified and directed.

S & F in repairs PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed.

S& F in repairs 75 mm Cast iron Nahni trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate complete all as specified and directed.

S& F in repairs Soap dish vitirous china fixed to plugs with chromium plated brass screws complete all specified and directed.

S/F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long all as specified and directed.(Make : Jaguar, Cat Part No CAN -1173)

Cleaning and removing all scale and dirt etc from tank of any type (RCC or PVC) and from mouths of circulating pipes exceeding 250 litre capacity and not exceeding 500 litre capacity all as specified and directed.

Cleaning and removing all scale and dirt etc from tank of any type (RCC or PVC) and from mouths of circulating pipes exceeding 500 litre capacity and not exceeding 1000 litre capacity all as specified and directed.

S&F in repair PVC water tank cover with fitting suitable for tank of capacity of 500 liters etc including device complete.

S&F in repair PVC water tank cover with fitting suitable for tank of capacity of 500 to 1000 liters etc including device complete.

S&F in repair tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated, all as specified and directed.

S&F in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified.

Demolition stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar.

M&L for Granite slab 20 mm thick machine cut bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade incl cutting and polshing as directed by EIC.

M&L for 20-25mm thk machine cut cuddappah stone slab flooring over cement screed bed laid and jointed with grey cment slurry mixed with pigment to match the shade of the slab incl grinding polishing complete all as specified.

S&F in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 915mm x 915mm x 255 mm all as specified.

S&F in repairs Health faucet brass chromium plated with connecting decorative pipe including all accessories required for fixing of 15 mm bore of pipe all as directed.

S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc, all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement all as specified and directed.

M&L rendering 10 mm thick in cement mortar 1:4 om fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

M & L applying two coat of oil bound distemper over a coat of primer to newly plastered surface including preparation of new plastered surfaces to wall all as specified and directed.

M & L applying three coats of white wash to newly plastered surface of ceiling including preparation.

JP ENTERPRISES

L.K.R.TIWARI CONSTRUCTION

Sunrise Traders

M/s KAILASH CHANDRA

MAHESH DADAJI BACHHAV

M/S JAYCONSTRUCTION CO

C J Enterprises