WBPWD/EE/BIR/NIeIRQ-14/2025-26

Hire and labour charges for making 125 mm thick brick work with (1:4) mortar and plastering (1:6) the new wall to match with existing wall and dismantaling the same after complition the purpose of the constraction with necessary mending the adjoining surface of the wall including removing the rubbish and cleaning the floor as before.

White washing including cleaning and smoothening surface thoroughly. All floors : (b) Two coats (to be done on specific instruction).

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat. i) Water based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) ii) Luxury Quality

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white)

Making kutcha drain upto 450 mm. deep and upto 750 mm width to grade including trimming sides and beds, removing spoils to any distance and speading.

Hire and labour charges for 75 mm dia bamboo railing on Jhau/Eucalyptus or other approved timber posts 1.4 m above G.L. and 0.60 m below G. including tying strongly with coir ropes and boring holes for posts in any soil/ concrete surface/ Bituminious surface packing the sides etc including cost of materials & carriage and labour complete including cost of restoration to the damages of the ground to its original condition after removing as per direction of Engineer in charge .

Hire and labour charges for providing "Drop Gate" at desired location with 15 cm dia salbullah of length not less than 8 meter including hoisting and fitting fixing with bolts and nuts to vertical posts (100 mm dia : 2 nos on each flank embedded 750 mm below G.L) and providing counter load of concrete or stone or iron block at the fulcrum end including painting two coats in alternate band providing 'STOP' plate, jute rope of necessary length etc complete including dismantling and removal as per direction of the Engineer in charge. For 7 days