Special Repair of Sarai No-9 at Deotsidh

Providing and laying mechanically mixed in position cement concrete of specified grade excluding the cost of centering and shuttering 1:2:4 (one cement : two approved coarse sand: four graded stone aggregate 20 mm (twenty millimetre) nominal size in all works up to plinth level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Providing and fixing 35 (thirty five ) milimetres thick including black enamelled Mild Steel butt hinges flush door shutters decorative type core of black board construction with frame of first class hard wood and well matched first class Indian teak ply veneering with verical grains of cross bends and face veneering on both faces of shutters including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Providing fixing 35mm (thirty five milimetres) thick 1st class kail wood panelled ,glazed or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled iron butt hinges with necessary screws including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 35mm (thirty five millimetre) thick 1st class kail wood wire gauge shutters using galvanised Mild steel wire gauge of I.S gauge designation eighty five G with wire of dia zero point five six milimetres for doors, windows and clerestorey shutters for including bright finished black enamelled iron hinges with necessary screws including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250×16mm( two hundred fifty into sixteen millimetre)including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10mm( two hundred into ten millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10mm(one hundred fifty into ten millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm (one hundred twenty five millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100mm (one hundred millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 200mm ( two hundred millimetre) bright finished brass hard drawn hooks and eyes complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing ceramic glazed floor tiles made of Kajaria/ Nitco first class quality conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm(twelve millimetre) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three point three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 10mm (ten milimetres) antiskid water proof stain and impect resistent heavyduty vitrified tiles Nitco or equilavent 600mmx600mmx10mm (six hundred milmimetres into six hundred milimetresinto ten milimetres) manufactured of approved shade and colours in flooring, treads, of steps and landings laid over 20mm(twenty milimetres) thick cement mortar1:3 (one cement: three approved sand)jointed with cement slurry mixed with pigment to match the shade of tiles as required including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing andfixing 0.60 (zero point six zero milimetres)thick pre-painted steel of Tata/Jindal or equilavent quality in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP)organic coating of 20 ( twenty) micronover 5 (five) microns primercoating to black coat of polyster of 5 (five) mironover 5(five) microns primer coating including fixing with per-painted iron J or L hooks, bolts and nuts 6mm(six milimetres) diametres with pre-painted limpet and rubber washer complete with all accessories as required as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete In trusses and trussed purlins in building including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Painting wood work with Deluxe Multi SurfacePaint to give an even shade. Two or more coat applied @ 0.90 ltr/10sqm (zero point nine zero litre/ ten square metre) over an under coat of primer applied @ 0.75 ltr/10sqm (zero point seven five litre /ten square metre)of approved brand and manufacture including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Wall painting (two or more coats on new work) with acrylic emulsion paint of approved brand and manufacture of required colour to give an even shade including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Dismantling tiled floors for thickness of tiles up to 25mm (twenty five millimetres) laid in mortar up to floor two level including stacking of serviceable materials and disposal of un-serviceable materials up to leads including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing chlorinated polyvinyl chloride15mm( fifteenmilimetres) nominal dia pipes internal work of Supreme/ Finolex/Kitch or equivalent make having thermal stability for hot & cold water supply, including all necessary CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.00 (one )metre spacing. This includs jointing of pipes & fittings with one step CPVC (chlorinated polyvinyl chloride)solvent cement and testing of joints complete as per direction of Engineer-in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing chlorinated polyvinyl chloride20mm (twenty milimetres) nominal dia pipes internal work of Supreme/ Finolex/Kitch or equivalent make having thermal stability for hot & cold water supply, including all necessary CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.00 ( one)metre spacing. This includs jointing of pipes & fittings with one step CPVC (chlorinated polyvinyl chloride)solvent cement and testing of joints complete as per direction of Engineer-in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china water closet pan with ISI marked white solid plastic seat and lid pedestal type water closet (European type W. C. pan) of Hindware /Cera make with seat and lid, 10 (ten) litres low level white PVC (polyvenyl chloride ) flushing cistern, including flush pipe, with manually controlled device(Handle lever), conformingto IS:7231, within all fittings and fixtures complete, including making good the walls and floors including entire carriage of materials within all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china wash basin of Hindware/cera make with a size of Flat back 550X 450 MMX195MM (Five hundred fifty into four hundred fifty millimeters into one hundred ninety five) size with a 15mm (fifteen milimetres) dia Chromium plated brass pillar Tap with C.I of M.S brackets, 32mm (thirty two milimetres) Chromium plated brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls as per the satisfaction of Engineer –in-charge including entire carriage of materials within all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings to the entire satishfaction of Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 32 MM (thirty two millimeters) dia M.I. union of approved quality for wash basin to the entire satisfaction of Engineer-in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600X 450mm (six hundred into four hundred fifty millimeters) bevelled edge mirror of Atul/ modi or equivalent make of superior glass mounted on 6 mm (six millimeters) thick A.C sheet or plywood sheet or plastic sheet and fixed with chromium plated brass screws and washers to the entire satisfaction of Engineer –in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and Fixing chromium plated brass soap dish with chromium plated brass brackets fixed to wooden cleats with chromium plated brass screws to the entire satisfaction of Engineer –in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15 MM( fifteen millimeters) diameter chromium plated brass bib cock of approved quality conforming to IS: 8931of Hind ware/ Cera make with capstan head to the entire satisfaction of Engineer-in-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15 MM( fifteen millimeters) diameter chromium plated brass long body bib cock of approved quality conforming to IS: 8931 and weighing not less 690 gms (Six hundred ninety grams) of Hind ware/ Cera make to the entire satisfaction of Engineer-in-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15 MM (fifteen millimeters) diameter chromium plated brass stop cocks (concealed) of standard design and of approved quality conforming IS:8931 of Hindware / cera make complete to the entire satisfaction of Engineer –in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15 MM (fifteen millimeters) diameter chromium plated brass angle valve for basin mixer and geyser points of approved quality conforming IS:8931 of Hindware / cera make complete to the entire satisfaction of Engineer –in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 32MM (thirty two milimetres) dia PVC (polyvenyl chloride) waste pipe for sink or wash basin including PVC (polyvenyl chloride) waste fittings complete as approved by Engineer –in-charge including entire carriage of materials in all leads and liftsThe rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimeters) nominal bore uPVC (unplasticised Polyvinyl chloride) connection pipe with brass union 45CM (forty five centimetres) length finolex/ Hindware/ Cera make complete including entire carriage of materials in all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110X90 MM ( one hundred ten into ninety millimeters ) polyvinyl chloride floor trap confirming to ISI specifications of Finolex/ Supreme/Astral make of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor complete in all lead and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing high pressure Polyvenyl chloride spigot and socket,waste and ventilating pipes conforming to ISI specifications of Finolex/ Supreme/Astral including fixing with approved adhesive etc complete to the entire satisfaction of Engineer –in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. (i) 110mm (one hundred ten milimetres) daimetres

Providing and fixing high pressure Polyvenyl chloride spigot and socket,waste and ventilating pipes conforming to ISI specifications of Finolex/ Supreme/Astral including fixing with approved adhesive etc complete to the entire satisfaction of Engineer –in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. (i) 90mm (Ninety milimetres) daimetres

Providing and fixing PVC(polyvinyl chloride) single equal branch with oval access door, insertion rubber washers 3mm thick bolts and nuts ISI marked of Finolex/ Supreme / Astral including fixing with adhesive of approved quality complete including entire carriage of materials up to all leads and lifts (i) 110 mm (one hunderd ten milimetres) diametres

Providing and fixing PVC(polyvinyl chloride) single equal branch with oval access door, insertion rubber washers 3mm thick bolts and nuts ISI marked of Finolex/ Supreme / Astral including with adhesive of approved quality including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government (i) 90mm (Ninety milimetres) daimetres

Providing and fixing PVC(polyvinyl chloride) plain bend of ISI marked of Finolex/ Supreme / Astral including fixing with adhesive of approved quality complete including including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Governmen (i) 110mm (one hunderd ten milimetres) diametre

Providing and fixing PVC(polyvinyl chloride) plain bend of ISI marked of Finolex/ Supreme / Astral including fixing with adhesive of approved quality complete including including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government (i) 90mm (Ninety milimetres) diametre

Providing and fixing8mm (eight milimetres) diameter C.P/S.S (chromium plated/ Stainless steel) Jet with flexible tube upto one metre long with stainless steel triangular plate to European type water closet of Cera/Astral/ Supreme/Finolex make and colour as approved by the Engineer-in-chargewith complete accessories.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing100 MM (one hundred millimeters) diameters chromium plated grating of superior quality for floor, gully or nahani trap to the entire satisfaction of Engineer –in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Governmen

thakur enterprises

V.V. CONSTRUCTION CO.

AVINDER KUMAR

Parmjeet Sharma