(Mahapour Nidhi)Construction of Community Hall at Hira Bumiya Ward No.33 Zone No.07.File No.341/25X3/6.

Earthwork in excavation for foundation, trenches for pipes/cables or drains etc. by mechanical means/ manual means (exceeding 30 cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50 m. Disposed earth to be levelled and neatly dressed. All Kind of soil

Supplying and filling in plinth under floors including, watering, ramming consolidating and dressing complete. Moorum/Hard copra

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and overlaps upto 12 mm horizontal / inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5 m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS:13920; IS 456 & SP: 34) etc. complete.

Kota stone 25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of 1:4 cement mortar (1 cement : 4 course sand) (minimum size of kota stone 2.0 sqft)

Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or plywood shuttering for: Foundations, footings, bases of columns, etc. For mass concrete.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

Brickwork with well burnt chimney bricks in bulls patent trench kiln, crushing strength not less than 25 kg / sq cm and water absorption not more than 20% in foundation and plinth. Cement mortar 1:4 (1 cement : 4 coarse sand)

Steel work in builtup M.S. tubular section (round, square or rectangular Hollow tube etc.) trusses/ framework etc. / railing work etc. including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes.

Providing and laying Plain/Reinforced cement concrete in sub-structure as per drawing and technical specifications and as per relevant clauses of sections 1500, 1700 & 2200 PCC Grade M20

12 mm cement plaster of mix : 1:4 (1 cement: 4 sand)

Providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work.

Providing and laying rectified Glazed Ceramic floor tiles 300 x 300 mm or more (8 mm to 10 mm thick) of 1st quality conforming to IS:15622 of approved make in and colours laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (8 mm to 10 mm thick) of 1st quality conforming to IS:15622 of approved make in all colours, laid on 12 mm thick Cement Mortar 1:3 (1 Cement : 3 Coarse sand) including grauting the joints with white cement and matching pigments etc., complete.

Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71 mm width & 28 mm thick as styles and rails .Joints are made using solvent adhesive and GI 'C' sections (39 mm x 19 mm x 0.6 mm thick) or MS pipe (40 mm x 20 mm) stiffener frame insert & telescopic polymeric 'L' corners. The panel shall be filled with 3 mm thick high-pressure compact laminate as per manufacturer's specifications and direction of Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look. (for W.C. and bathroom door shutter).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM Rubber neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness

Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings including trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work PN - 16 Pipe, 32 mm OD (SDR – 7.4)

Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings including trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work PN - 10 Pipe, 160 mm OD (SDR - 11)

Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 165mm long. Weighing not less than 110 gms.

Providing and placing on terrace at all floor polyethylene water storage tank ISI:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing white vitreous china water closet squatting pan (Indian type) P or S trap, complete including cutting and making good the walls and floors wherever required : Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap.

Providing, Laying and Jointing non-pressure (NP4) RCC socket & spigot pipes with rubber gasket joint including testing of joints. 250 mm dia

Please Enable Macros to View BoQ information