SR (MO) TO CONVERT OH LINE INTO UG CABLE AT ARMY AREA MADUKKARI, REPLACEMENT OF 2 LT PANEL FEEDERS AT MES COMPLEX, SR REPLACEMENT OF AL WIRING TO COPPER WIRING CABLE IN ORS MD ACCN AND CONVERSION OF LED LIGHTS AT ARMY AREA COIMBATORE UNDER AGE(I)CBE

Amount

Taking down carefully point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendants, regulators sockets, lamp holder, light fittings etc and making good the disturbed surface complete all as specified and as directed.

M&L Point wiring complete with 1.5 sqmm, 1100 volts grades, FRLS PVC insulated unsheathed multistranded copper conductor cable drawn through existing non metallic rigid PVC conduit ISI mark and provn of 1.6 mm thick MS terminal boxes concealed in walls with 3 mm thick laminated hylam sheet top cover for fixing switches regulators etc and provn of 1.5 sqmm multistranded copper earth continuity PVC cable and connecting to earth dolly complete all as specified and as directed for the following:-

One light point controlled by one switch 5 amps complete all as specified and as directed.

One fan point controlled by one switch 5 amps and regulator complete all as specified and as directed.

One socket outlet 3 pin 5 amps on independent board complete all as specified and as directed.

All as per item No.2 hereinbefore but One light point controlled by two 2 way switches complete all as specified and as directed.

All as per Item No. 2 hereinbefore but with 4.0 sqmm unsheathed FR PVC insulated copper conductor cable drawn through and including non metallic rigid PVC casing & capping ISI marked, for socket outlet 15 Amps on independent board including 4.0 sqmm PVC insulated unsheathed copper cable for earth continuity conductor complete all as specified and as directed.

S&F Decorative ultra slim round profile LED lighting fixture 20 W LED 6500 K with extruded polycarbonate, environmental friendly, energy efficient ready to use pack and PVC two core copper conductor cable from ceiling rose to fittings etc. complete all as specified and as directed. Make:- Cat part No. LHEXAQP7PN1W020 of make Havells or techno commercially equivalent.

S&F Decorative ultra slim square profile LED lighting fixture 10 W LED 6500 K with extruded polycarbonate, environmental friendly, energy efficient ready to use pack and PVC two core copper conductor cable from ceiling rose to fittings etc. complete all as specified and as directed. Make:- Cat part No. LHEXACP7IN1W010 of make Havells or techno commercially equivalent.

S&F Bulk head fittings, Oval type, 6.5 W, LED, 6000 K, Bulkhead designed for modern homes available with premium quality diffuser for glare free light and easy to install snap fit installer complete all as specified and as directed. Make:- Cat no. LHEXCGP7PN5W006 of make Havells or techno commercially equivalent.

S&F Switch piano, flush type, 5 amps, single pole, one way including electrically connecting up complete all as specified and as directed.

S&F Switch socket combination, 2 in 1, 5 Amps, flush type, including electrically connecting up complete all as specified and as directed

S&F Switch socket combination, two in one, 3 pin 5 Amps & 15 Amps universal type including electrically connecting up complete all as specified and as directed

S&F Step type electronic fan regular flush type including electrically connecting up complete all as specified and as directed

S&F MCB, SPN, 32 amps, including electrically connecting up complete all as specified and as directed Make:- Cat no. DHMGCSNF006-032 of Havells make or techno commercially equivalent

S&F MCB, SP, 6 to 32 amps, including electrically connecting up complete all as specified and as directed Make:- Cat no. DHMGBSPF006-032 of Havells or techno commercially equivalent

M&L Earthling complete with GI earth plate electrode 60x60cmx6mm thick buried directly in ground earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m below normal ground level connected to GI earth wire 4mm dia by means of bolts and nuts washers made out of GI and earth wire protected by Galvanized pipe, light grade, 15mm bore, and connected to man control board, 20 mm bore dia GI pipe for watering all as shown in Electrical plate No 5 of SSR part I including necessary earth work and excavations in any type of soil PCC 1:2:4 type B1 chamber with 40mm thick, RCC 1:2:4 cover slab with 6mm dia MS bars etc. complete all as specified and as directed.

M&L Sub main wiring complete with two runs of 4 sqmm single core unsheathed FRLS PVC insulated copper cable 1100v grade along with 4 sqmm single core cable for earth continuity wire drawn through in the existing non metallic PVC conduit of suitable size complete all as specified and as directed. Note:- Two Runs of 4 sqmm and one run of 4 sqmm copper cable will be measured as one length.

Taking down of down existing LT Panel and all its accessories etc complete all as specified and as directed.

Earthling complete with GI earth plate electrode 60x60cmx6mm thick buried directly in ground earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m below normal ground level connected to GI earth strip of 32x6 mm by means of bolts and nuts washers made out of GI and earth strip protected by Galvanized pipe light grade 40mm bore, 20 mm bore medium grade watering pipe and connected to main control board all as shown in Electrical plate No 5 of SSR part I including necessary earth work and excavations in any type of soil PCC 1:2:4 type B1 chamber with 40mm thick, RCC 1:2:4 cover slab with 6mm dia MS bars etc complete all as specified and as directed.

Taking down of ACSR conductor of any size from RCC/steel tubular poles by dismantling the binding wire, insulator, etc complete all as specified and as directed.

Taking down existing cross arms of any type and any size including bracing, support clamps and back plate by unscrewing bolts and nuts etc complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in hard / dense soil for laying of UG cables, etc complete all as specified and as directed.

Removing excavated materials not exceeding 50mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

Returning, filling in, spreading, levelling, watering and ramming in layers not exceeding 25cm thick in any type of soil complete all as specified and as directed.

Supply, Laying and testing XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty with aluminium conductor 1100 volts grade of size cross sectional area 50 Sqmm, 4 core complete all as specified and as directed.

All as item No 25 hereinbefore but Size of cable 25 Sqmm, 4 core complete all as specified and as directed.

All as item No 25 hereinbefore but Size of cable 16 Sqmm, 4 core complete all as specified and as directed.

All as item No 25 hereinbefore but Size of cable 10 Sqmm, 4 core complete all as specified and as directed.

M&L GI tubing, light grade, 40mm bore for protection of cable fixed to wall or laid in trenches including taking up or down old unserviceable tubings complete all as specified and as directed.

M&L GI tubing, light grade, 25mm dia bore for protection of cable fixed to wall or laid in trenches including taking up or down old unserviceable tubings complete all as specified and as directed.

M&L Cutting of existing bituminous surface road including returning filling in and making good with PCC 1:3:6, type C1, using 20mm graded stone aggregate to match with the existing surfaces complete all as specified and as directed. (Note: Specifications of materials like cement, aggregates etc required for PCC 1:3:6 type C1 shall be as catered in SSR Part-I 2009)

M&L Sand cushioning to PVC cable using riddled sand or river sand gently punned below / around cable complete all as specified and as directed. Note: Punned thickness only will be measured and paid.

Burnt bricks sub class B of old size, laid dry in trenches for under ground cable protection complete all as specified and as directed.

M&L Straight through cable jointing kit for 1100volts grade cable complete with jointing material heat shrinkable and accessories suitable for 2 core / 4 core XLPE / PVC insulated armoured aluminium conductor cable of size 10 Sqmm to 70 Sqmm complete all as specified and as directed.

M&L for Junction box sheet moulding compound type with hinged type door locking arrangement, white colour with MCB SP 6Amps fixed in the box complete all as specified and as directed.

eurekaenterprises

Saket Enterprises

SEMBA ELECTRICALS

KUMAR AGENCIES

M.V.K.ENTERPRISES

rvelectricals

SUPER COOL