WELCOME MAINTENANCE AND CONNECTED REPAIR WORKS TO CERTAIN MARRIED ACCOMMODATION AT VIKAS NAGAR CVRDE AVADI

Amount

Taking down cement plaster on brick wall/ concrete surface including racking out joints, hacking for key scrubbing down with water etc. all as specified and directed by Engineer in charge.

Material & labour for Rendering 15mm thick in fair faces of brick work or concrete wall surfaces in CM 1:4 finished even and smooth without using extra cement all as specified and directed by Engineer in charge.

Material & labour for Rendering 10mm thick in fair faces of brick work or concrete wall surfaces in CM 1:6 finished even and smooth with out using extra cement all as specified and directed by Engineer in charge.

Material & labour for rendering 5mm thick in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer in charge.

Material & labour for preparation of new decorated surfaces and applying two coat of distemper oil emulsion over a coat of primer on walls all as specified and directed by Engineer in charge.

Material & labour for preparation of new plastered surfaces of wall and applying two coats of exterior weather coat paint including one coat primer all as specified and directed by Engineer in charge.

Material & labour for preparation of new decorated surfaces and applying three coat of white wash on ceiling all as specified and directed by Engineer in charge.

Material & labour for complete removal of existing treatment and applying two coat of oil bound distemper all as specified and directed by Engineer in charge.

Material & labour for applying 3mm thick internal wall care putty complete all as specified and directed by Engineer in charge.

Material & labour for preparation of old plastered / painted wall surfaces and apply one coat of oil bound distemper all as specified and directed by Engineer in charge.

Material & labour Preparation of old plastered, decorated surfaces and apply one coat of white wash on ceilings all as specified and directed by Engineer in charge.

Material & labour Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer in charge.

Material & labour Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer in charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed by engineer in charge.

Material & labour for Vitrified Ceramic tiles (Light Shade) 8-10mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed by engineer in charge

Material & labour for Vitrified Ceramic tiles (Light Shade) 8-10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1: 4 complete all as specified and directed by engineer in charge

Material & labour for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed

Material & labour glazed coloured ceramic tiles in vertical surfaces 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat for tiles all as specified and directed by Engineer in charge.

Material & labour 20mm thick granite (of any type) black coloured slab in single piece for platform of kitchen/WHB, machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match over 15mm thick screed bed in CM 1:4 the shade of granite stone including grinding and polishing complete all as specified and directed by Engineer in charge.

Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 to ends or edges of concealed water tubing, cutting not exc 10cm girth in brick wall all as specified and as directed by Engineer-in-Charge.

Taking up or down 15mm dia steel tubing and connections, including cleaning for re-fixing or removal to store all as specified and as directed by Engineer-in-Charge.

Taking up or down 20mm dia steel tubing and connections, including cleaning for re-fixing or removal to store all as specified and as directed by Engineer-in-Charge.

Supplying and laying of 16 mm dia (Outer) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 20 mm dia (Outer) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and fix in repairs PVC valve less, syphonic action type, flushing cistern(Push type) (10 Liters), low level, white, with inlet, ball valve, float and handle including brackets all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair vitreous China wash basin, angle back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and finning in ends of brackets or erecting stand including 32 mm waste fitting, brass, chromium plated for glazed ware WHB with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair 32 mm waste fitting, brass, chromium plated for glazed ware WHB with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed but fancy type all as specified and as directed by Engineer-in-Charge.

Supply & Fix low density 32mm polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to wall all as specified and directed by Engineer in charge.

Supply and fix in repair 15mm stop valves/angle cock but fancy type, chromium plated, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair 15 mm bib taps, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed but fancy type, chromium plated all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 300mm all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms)all as specified and as directed by Engineer-in-Charge.

Supply & Fix vitreous china squatting pan "ORISSA' pattern or size 580 x 440mm white with integral foot rest etc (Excluding flushing cistern and flush pipe) including provision of lime concrete bedding and making good to floor, fixed in repairs all as specified and directed by Engineer in charge.

Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinges devices complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinges devices all as specified and as directed by Engineer-in-Charge.

Supply & Fix in repairs Chromium plated brass shower rose 125mm 15mm dia size with arm, swivel joints etc. all as specified and directed by Engineer in charge.

Supply & Fix in repairs stainless steel sink with drainage board, made out of , 1.0mm thick sheet for kitchen with plug, washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed by Engineer in charge.

Supply and fix in repair 40 mm waste fitting, brass, chromium plated for glazed ware sink with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and as directed by Engineer-in-Charge.

Supply & Fix in repair Fancy type cast copper with captain head, chromium plated, screwed down high pressure Mixer valve including three joints with L bend to steel pipes complete all as directed by Engineer in charge, screwed for 15mm dia iron pipe and all as specified and as directed by Engineer-in-Charge..

Supply & Fix corner glass shelves 300mm with ABS brackets of Prayag Polymers India Ltd Cat No BEA-46 or equivalent make fixed in repairs all as specified and as directed by Engineer-in-Charge.

Supply & Fix in repairs continuous (piano ) hinges ,mild steel ,bright finish or electro galvanised width of flap 30 mm all as specified and directed by Engineer in charge.

Supply and fix in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished all as specified and as directed by Engineer-in-Charge.

Supply & Fix in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer in charge.

Supply & Fix in repairs Tubular towel rail brass chromium plated , 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed by Engineer-in-Charge.

Supply & Fix Prelaminated particle board 12mm thickness interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including removal of existing board all as specified and as directed by Engineer-in-Charge.

Material & labour for 6mm thick teak wood lipping to 12mm thick particle board fixed with nails complete including varnish finishing etc. all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing fixing spring / clips and providing and fixing new one all as specified and as directed by Engineer-in-Charge.

Supply & Fix 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane all as specified and directed by Engineer in charge.

Cutting windows/ventilators from its position and Welding with box type hinges including replacement of damaged member and making good the surface by painting with synthetic enamel paint including primer all as directed by Engr-in-charge

Supply & Fix Bathroom cabinet PVC with mirror suitable for to keep the bathroom items, size 622 x 422mm, white colour all as specified and directed by Engineer in charge.

Supply & Fix as in repairs stainless steel plate rack of size 36"x30" all as specified and as directed by Engineer-in-charge.

S/F in repairs Floor door stopper of aluminium alloy body and tongue. Anodized with hard drawn steel spring fixed in floor(length of cover plate 150 mm) all as specified and as directed by Engineer-in-Charge.

Supply & Fix in repairs 200mm aluminium anodised barrel tower bolts of extruded section and fixed all as specified and as directed by Engineer-in-Charge.

Supply & Fix in repairs 300mm long aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of external section or cast aluminium alloy and fixed all as specified and as directed by Engineer-in-Charge.

Supply & Fix chromium plated Health faucet ABS SS Braided hose 1m with CP hook ,and fixed for 15mm bore dia (Fancy type) all as specified and as directed by Engineer-in-Charge.

Supply & Fix in repairs MS butt hinges 100mm medium weight cold rolled and fixed to wooden or steel frame with screws or by welding all as specified and directed by Engineer in charge.

Supply & Fix in repairs aluminium handle cast type anodised of size 150mm long all as specified and as directed by Engineer-in-Charge.

Supply & Fix Drapery Rod (Curtain rod) 25mm dia aluminium powder coated plain/ corrugated fixed to wall with brackets, decorated end crowns fancy type including removal of existing pelmet box as in repairs all as specified and as directed by Engineer-in-Charge.. (End crown and fixing bracket will be paid separately)

Supply & Fix Decorated end crown PVC (socket) suitable for 25mm dia drapery rod (curtain rod) fixed to rod ends all as specified and as directed by Engineer-in-Charge.

Supply & Fix fixing Alu clamp for drapery rod (curtain rod) suitable 25mm dia drapery rod all as specified and as directed by Engineer-in-Charge.

Material & labour for securing of any description in existing metal frames glazed with putty/beads including removing loose or decayed putty/beads painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surfaces to match existing work (New length of frame re-putties shall be measured) including making necessary stage / scaffolding complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkhats or frames n.exc 1.5 sq. m with shutters (without taking off shutters from the frame) each all as specified and directed by Engineer-in-Charge.

Supply & Fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing all as specified and directed by Engineer-in-Charge.

Supply & Fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing all as specified and directed by Engineer-in-Charge.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m with shutters (without taking off shutters from the frame) each all as specified and directed by Engineer-in-Charge.

Taking down shutters exc 1 sq. m and n exc 2 sq. m all as specified and directed by Engineer-in-Charge.

Supply & Fix 35mm thick Plain framed, Panelled shutter(two panel) with lock rail and panel of 9mm B.W.P. commercial Ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003(part-I)kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply & Fix Glazed and skeleton shutters 30mm thick of 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed by Engineer-in-Charge.

Supply & Fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed by the Engineer-in-Charge.

Refixing shutters in same opening of any description of area exc 1 Sqm but n.exc 2 Sqm each all as specified and directed by Engineer-in-Charge.

Supply & Fix 300mm long aluminium anoised sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet cast or extruded section and fixing both and sliding bolts of external section or cast aluminium alloy and fixed all as specified and directed by Engineer-in-Charge.

Supply & Fix Aluminium anodized barrel tower bolts 200mm long of extruded section and fixed all as specified and directed by Engineer-in-Charge.

Supply & Fix Aluminium anodized barrel tower bolts 100mm long of extruded section and fixed all as specified and directed by Engineer-in-Charge.

Supply & Fix Aluminium handle cast type anodized of size 150mm long all as specified and directed by Engineer-in-Charge.

Supply & Fix Aluminium handle cast type anodized of size 100mm long all as specified and directed by Engineer-in-Charge.

Supply & Fix in repairs MS butt hinges 100mm medium weight cold rolled and fixed to wooden or steel frame with screws or by welding all as specified and directed by Engineer in charge.

Material & labour for preparing new wooden surfaces and two coats of synthetic enamel paints over a coat of pink primer all as specified and directed by Engineer-in-Charge

Supply & Fix 2nd class Hard Wood plain solid straight chowkhat and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed by Engineer-in-Charge.

Supply & Fix 25 x 6 mm flat iron for hold fast confirming to Fe-290 Grade E-165 all as specified and directed by Engineer-in-Charge.

Material & labour for Preparing surfaces of wood and wood based materials, treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each and treated with tar or coal tar black paint.

Material & labour Cement concrete (1:2:4) type B-1 using 12.5 mm graded stone aggregate as in lintels upto 1.50 m clear span, cills , steps, seismic and other similar bands, copings, kneelers, apex stones, bed plates, bed blocks of hold fasts etc including necessary form work complete all as specified.

ANISHRAJAN ENTERPRISES (BID ID -3342896)

k.Pandurangan (BID ID -3347253)

SAMYDOSS CONSTRUCTIONS (BID ID -3354127)

BR Engineering (BID ID -3355691)

D Subramani & Sons (BID ID -3347436)

SHRI BALAJI CONSTRUCTIONS (BID ID -3355693)

K Kumar Construction (BID ID -3344988)