Renovation and interior works of SCOPE Club in SCOPE Complex, Lodhi Road, New Delhi

S NO DSR/ MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

1 FLOORING WORKS

CEMENT CONCRETE: Providing and laying in position CEMENT CONCRETE of specified grade exluding

1.01 4.1 the cost of centring and shuttering-all work upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 106 CUM 6,326.05 6,70,561.30

ITALIAN MARBLE: Providing and laying machine cut, mirror polished, Italian Marble brass brass inlay

stone flooring laid in required pattern in linear portion of the building all complete as per architectural

drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1

1.02 11.51 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with

white cement slurry admixed with pigment to match the marble shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab in all colour and shade 700 SQM 6,095.50 42,66,850.00

GLASS MOSAIC TILES: Providing and fixing Glass mossaic tiles on finished plain wall surface of size

20mm x 20mm x 4mm in all colour, design, fixing in customize design as per direction of Engineer-in-

Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied

at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and

required pattern approved by Engineer-in-Charge.

FLAMED FINISH GRANITE: Providing and laying flamed finish Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1: 4 (1 cement: 4

1.04 11.55 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with

pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge:

11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent 726 SQM 2,589.90 18,81,497.41

POLISHED GRANITE: Providing and laying Polished Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4

11.56 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with

pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

11.56.1 Polished Granite stone slab colour of Blue Pearl, Black Pearl or equivalent 800 SQM 3,908.80 31,27,040.00

ENGINEERED WOODEN FLOORING: Providing and Fixing of 15mm thick Engineered Woooden Flooring

with plank width of 135/185mm and length of 1800/2100mm and top layer up to 3mm Walnut/Oak wood.

Surface of Top layer is pre finished with several layer of UV hardened Acrylic lacquer. Strictly Free from

Formaldehyde and solvents. Flooring plank shall be interlocked using Plank Loc locking system in a glue

less floating manner. Engineered wood planks shall be a composition of 3 layer of Pine wood with direction

of each layer oriented at right angle to the adjacent layer of natural strain in Lacquer and Beveled in length

1.06 M.R. and width as specified by the manufacturer-in-charge. Product is MAKE IN INDIA, to maitain a consisitent 275.00 SQM 6,470.00 17,79,250.00

and long term supply of all required quantities. Accessories i.e Skirting, beading, profile etc. will be

Vprotect Underlay 2mm PE foam and polythene combo with 40 Micron.

Design and shades are as per the choice of Engineer-in charge

VITRIFIED TILES: Providing and laying vitrified floor and wall tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of

11.41A approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

1.07 sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and

matching pigments etc., complete.

CARPET TILES: Providing and laying Carpet tiles of Yarn type Eco Solution Q® Nylon (Nylon 6) only;

Multi-Level Pattern Loop, manufactured using 100% solution dyeing process, Tiles of size 23cms x 91cms

or equivalent as per direction of EIC and site requirement with SSP® Soil Protection treatment TM or

equivalent containing properties of Stain Repel, with Tile- 100% PVC Free/ 100% Bitumen Free/ 100%

Recyclable - backing system with recycled content, made from thermoplastic polyolefin compound with

reinforcing layer high-performance environments requiring modular flooring, having tufted yarn weight of

542.5 gsm/sqm and average yarn density of Minimum 9143 oz/cu. yd. or more, Nominal total thickness

5.42 mm minimum, Radiant Panel class 1 rated (ASTM E648), NBS smoke < 450, Pill test -Passed, Anti

1.08 M.R. Static Property less Than 3.5 kv, Texture Appearance Retention Rating of 3.5 for Severe Use, Anti 45 SQM 2,600.00 1,17,000.00

Microbial Treatment-Passes (AATCC-174). CRI Green Label Plus is certified for indoor air quality, including

fixing/ installation with Low/ Zero VOC content Adhesive. Impact Sound (ISO 10140-3) 20 dB & Sound

absorption (ISO 354) 0.2 Class D.or equilent as per direction of EIC

IPS FLOORING: 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm

thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone

aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as

per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of

steps etc. complete.

TOTAL FLOORING WORKS 1,06,18,551.96 18,96,250.00

2 FALSE CEILING WORKS

2 Digitally signed by SANJAY

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of

frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of

120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6

mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with

dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed

with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having

12.45 lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate

2.01 channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter

of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with

the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended jointing compound, jointing tapes,

finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS

certification marks)

BAFFLE CEILING: Providing & Installation of Baffle ceiling system comprises of 30 mm x 100 mm (30 mm

width & 100 mm Height) U Shape panels in RAL color finish. Panels shall be made of 0.5 mm thick

galvanized steel after Powder-coated and length up to 4000 mm. Panel shall be high corrosion resistance

and good color stability. Centre to Centre panel gap will be 75 mm. Panels are fixed on to roll formed

carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with cutouts to hold the

panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6

mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1200 mm

2.02 MR c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut 100 SQM 4,214.00 4,21,400.00

in lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used

to cover the edges of the panels.

STRETCHED FABRIC CEILING: Supply & installationof fabric false ceiling / wall formed out with

TRANSLUCENT Printed fabric coverings made out of polyester knitted fabric coated with Polyurethane

(PU). The TRANSLUCENT Printed fabric width of 2m, 3m, 4.1m &5.1m with weight of 200gm/m2, thickness

of 0, 3 mm. The appearance of fabric is matt, smooth and uniform with blanq color and light transmission of

50%. The tear strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN. The fire rating should

be accordance to B-S1, d0. The fabric should be humidity resistant and free of carcinogenic

substances(CMR) or volatile organic Compounds (VOC’s). At labeling in accordance with the French

decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric should be installed with approved

manufacturer guidelines. It comes with 10- year manufacturer guarantee. The installation of

2.03 MR TRANSLUCENT Printed fabric should be dry installation & done at room temperature using CLIPSO PVC, 100 SQM 8,500.00 8,50,000.00

ABS Grippers. Clipso ceiling base to be made of MS or Wooden frame finishing to a flush finish of tapered

and square edges in desired design as per architect specification.Supply of LED Lights behind the Fabric

Wall/ False ceiling in modules/ PCB with recommended wattage as per manufacturer's standards to give

an effect of ambient lighting. LED spacing / Pitch should be atleast 73 -80mm with beam angle of 170

degree, Colour temperature shoud be as per design intent 3000K/4000K/6000K. Wattage of 8-10W/mtr.

LED modules/ PCB should be positioned properly to provide an even light flow, casting noshadows or dark

spots. LED Driver Cost included.

75 METAL CEILING : Providing and fixing GI Plain 75mm wide x15mm deep panel upto 6mtr, shall be roll

formed out of 0.5mm thick Powder Coated .The top coat of panel shall be 60 micron polyester coated finish

in approved colour. The panel shall be factory cut in up to 6Mtr OR required length. Accessories Detail:

Carrier: 63mm deep, made out of 0.6mm thick steel backed with enameled black paint having cut out to

hold on panel in a module of 75mm closed. The joint of two carriers shall be joined by means of carrier

2.04 MR splices maintaining a module of 75mm .4mm dia galvanized rod with special height adjustment butter fly 30 SQM 3,689.00 1,10,670.00

clips made out of SS steel sheet. The edge profile G.I.shall be matching with the panel.

PERFORATED SQUARE ACOUSTIC CEILING : Providing and fixing suspended Demountable acoustic

ceiling in recessed grid system 300 x 1200 x12.5mm E with Unity 3,square 3.5mm holes, with 0.80

NRC*Material: High Grade Glassfiber Reinforced Perforated plasterboard with Cleaneo TechnologyBoard

type: Ceiling tileLength x width x thickness: 300X1200X12.5mmEdge: E recessed grid system ( 8mm

recess)Perforation: Unity 3, 3.5x3.5 Surface: Water-based acrylic paint Colour: White NCS 0701 Y24R,

closet match to RAL 9003; gloss 5 Attachment: Silhouette 15mm face exposed grid.

GYPSUM LOUVERED CEILING : 12.5 x 600 x 600 high grade, glass-fibre reinforced, acoustic, gypsum

panel with acoustic perforation as Unity 3 - square 3.5x3.5mm c/c 8.33 type U3.The ROLD 12 tiles with

Strip shall be screw fixed on min. 60mm wood or steel furring. The ROLD 12 with strips tiles are with edge

B+ and are pre-painted ready for installation on site. ROLD 12 screws, type Torx 15, with white-painted

head are used for screw-fixing. The acoustic ROLD 12 tiles are furnished with a grey (white) absorbent felt

backing with an airflow resistance of 330-460 Ns/m³ (DIN 53887).Colour - White, NCS 0701 Y24R, gloss 5

(standard) or re-paintable at site with water based acrylic paint.Closest match for repainting: NCS

2.06 MR 0700/RAL 9003. Paint Type - Waterbased acrylic emulsion paint including titanium for hygienic indoor 75 SQM 19,000.00 14,25,000.00

climate. Light Reflection: 69.2% according to DIN Norm 5036.Acoustic Property - αw: 0.95; NRC: 0.90.Fire

Class - A2-s1,d0 .Suspension - The ROLD 12 must be screw fixed to furring of 22 mm wood or 60mm steel

battens at 300 mm c/c.

3 Digitally signed by SANJAY

WAVE BAFFLE CEILING: To Supply & Install Custom made Vertical curve Polylam Blades Ceilings as per

the design intent. The vertically curve baffle system comprises vertically curve baffle with 750-150mm

deep curved rafters manufactured out of 2.0mm Aluminium to provide wave effect. The module for fixing

baffle shall be 150mm centres as per design requirement. The carrier rails run perpendicular to the baffles

axis and can be mounted with M6 threaded rods using technical approved fasteners as per EN 13964

standards. The individual baffle lengths between 1200- 2400 mm can be selected. Baffles lengths less than

2.07 MR 1500mm required two carrier rails mounted at the baffle ends. Baffle longer than 1500mm require additional 200 SQM 8,834.00 17,66,800.00

carrier rails mounted in the centre. Finish RAL Powder Coated.No Pre Coated products shall be accepted.

The spacing of the grid angles is according to the requirements of DIN 18168 and DIN EN 13964 and

quality controlled to ISO 9001:2015 approved by SIS & LEED certification by Indian Green Building council

TOTAL FALSE CEILING WORKS 11,34,490.50 48,29,320.00

3 WALL FINISHES WORKS

GLASS PARTITION (FIXED GLASS PARTITION WITH 10MM GLASS): Supply & Insallation of partition

make sleek series aluminium profile with Clip-on/ U-Section of size 30mm x 21mm with 2.5mm Wall

thickness in matt black/ natural Alu finish with suitable gaskets for insertion with 10mm thick clear

toughened glass. It consists of two way Polycarbonate I profiles, 90 Degree L Junction and T Junction

profiles. Transparent profile to be applied on the glass shim for glass wall systems Supplied with double

sided adhesive tape. Profile to be inserted in the joint instead of sealing to give continuity glas effect and

suitable fasteners for fixing profiles including installation charges.

FRAMELESS HINGED GLASS DOOR: Supply & Insallation of door make sleek series Door Profile frame

of size 45X60x45mm along with necessary seals, door to be fixed on Hinges & Lock with lever handle for

rebated door in matt black/ natural Alu finish with Top Mounted Door closer with Slide Channel on Top and

saddle plate for fixing on the Glass door suitable for 10mm thick clear toughened glass and necessary

seals to be provided all around the door frames. Hardwares should match colour of door frames and

profiles. All necessary hardware should be in same colour including Hinges and minimum 3 hinges are

3.02 MR required in each door depending on door size. Necessary Hardwares includes Lock with Lever Handles, 25 SQM 58,950.00 14,73,750.00

Seals, Hinges & door closers as per Engineer in charge choice. Installation rates should be inclusive and

vendors shall provide end to end solution. Lever handle should be Solid in aluminum alloy in curved/square

shape as per Engineer in charge choice Finish: Aluminium Anodized (Silver) - Black matt finish.

Providing and fixing machine cut, mirror/ eggshell polished, Marble stone work for wall lining (veneer work)

including dado, skirting, risers of steps etc., in required design and pattern (if required with marble stone

slab pieces of different shapes, sizes & texture but of even thickness) on 12 mm (average) thick cement

mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including

8.11 pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing,

polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.

18 m thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

WOODEN DOOR FRAMES : Providing wood work in frames of doors, windows, clerestory windows and

9.1 other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia

3.04 & length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood 5 CUM 1,31,576.95 6,57,884.75

WOODEN BATTERNS : Providing and fixing specified wood frame work consisting of battens 50x25mm

3.05 fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood 5 CUM 1,63,814.10 8,19,070.50

FLUSH DOOR SHUTTERS : Providing and fixing ISI marked flush door shutters conforming to IS : 2202

9.21 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well

matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws 15 SQM 2,015.75 30,236.25

WOODEN LIPPING : Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth

on all edges of flush door shutters (over all area of door shutter to be measured).

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts

3.11 9.53 and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 18 EACH 194.35 3,498.30

coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and Fixing Sliding Track with Hold Open Arm TS 180 / TS 280 & Standard Arm with Hold

Open Arm top and Bottom Strap door closers of approved make and model all complete as per the

direction of Engineer-in-charge.

Providing and Fixing Cylindrical Dead lock Back set- 50 mm with Key Hole and SS Finish of approved

make and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing 60 mm SS Cylinder One side knob and one side regular key (3 key) with SSS finish

3.14 MR for wooden doors of approved make and model all complete as per the direction of Engineer-in-charge. 18 Each 798.00 14,364.00

Providing and Fixing - Double cylinder Floor Spring with Top-Bottom Patch,pivot and Bottom Patch Lock

Maximum door weight 100 Kg. Maximum door width 1000 mm.Closing speed : 120°,Final closing speed :

15-0°. Hold Open (standard): 90° hold open.Suitable for 10-12 mm glass

Weight of floor spring approx : 6kg

3.15 MR 5 Years Warranty against manufacturing defect with 5,00,000 cycles Tested approved make and model all 18 Each 9,858.00 1,77,444.00

complete as per the direction of Engineer-in-charge.

4 Digitally signed by SANJAY

GLASS FILMS : Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-

effect film to reproduce Sand-blasting effect on glass with customised designs, thickness of 2 mil (0.05mm)

without adhesive & 3mil (0.8)with adhesive having minimum tensile strength of 3.5 pound/inch at 73 F(0.6

kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass

3.16 MR Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) . Contractors 110 SQM 2,240.00 2,46,400.00

payment wouldn't be released until & unless he/she produces orginal warranty certificate from the

Providing and fixing Bollard Channelled woodwork acoustic wall panel of width of 192/132/128mm with

finishing of 15 mm thick Grooved wooden acoustic panel of size 2420 mm, Groove Size 3.2mm at an

interval of 21mm/28 mm c/c as per acoustic design / Engineer in charge approval, the wooden acoustic

panels to be backed with black acoustic fleece with NRC of 0.45 (NRC 0.8 with 50mm GW of 48kg/m3).the

3.17 MR edge of panel shall be Tounge and groov to be fixed with clips on aluminium profile designed specially fo 100 SQM 3,858.00 3,85,800.00

the panel. the panel will be mounted with the help of clips on Bollard Aluminium extruded Keel. The

grooved acoustic panel laminated in desired shade as per Engineer In charge.

Providing and fixing woodwork 16mm thick forming 600x600 mm tiles with Tegular edge. Perforation in the

panel will be of 6mm/8mm/10mm or as per architect approval, the wooden ceiling panels to be backed with

black acoustic fleece with NRC of 0.4 (NRC 0.8 with 50mm GW of 48kg/m3). The grid should be of

24mm/15mm wide T - section flanges color Black. The main T runner with length and size of 24X38mm/

15X38mm made from .30mm thick sheet spaced at 1200mm Centre to Centre and cross T of size

3.18 MR 24X25mm / 15X25 made of .3mm thick of 1200mm long spaced between main T at 600mm center to centre 100 SQM 3,228.00 3,22,800.00

to form a grid of 1200X600mm and second cross T of length 600mm and size 24X25mm/15X25mm made

of 0.30mm sheet to be interlocked at middle of the 1200X600 mm panel to form grid of 600X600mm and

wall angle of size 19X20 The Wooden acoustic panel laminated in desired shade as per Engineer In

LACQUERED GLASS : Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of

approved color by Architect/ Client / Customer, fixed with compatible neutral grade silicon on a perfectly

levelled 12mm thick water proof marine plywood / MDF / Mineral fibre board which is mounted on RCC

wall/any other structure. Lacquered glass must be made industrially (using curtain coating process);

opaque (if viewed against a support wall), uniformly coated with PU lacquer (50 micron thick coating or

more); panel to panel colour consistency (measured by photo spectrometer); highly durable (passes

3.19 MR hardness test for minimum 220 oscillations); humidity resistance (conforms to BS EN 1036 1999 or 75 SQM 4,200.00 3,15,000.00

equivalent) ; environmentally friendly having Low VOC (no lead, no arsenic, no copper, no formaldehyde),

low VOC content <100g/l. Silicone used should not react with lacquer coating (compatible neutral cure

GYPSUM BOARD PARTITION : Providing and fixing partition upto ceiling height consisting of G.I. frame

and required board, including providing and fixing of frame work made of special section power pressed/

roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the

spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable

anchor fastener or metal screws with nylon plugs and the studs 48mm wide having one flange of 34 mm

9.105 and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and

3.20 placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along

both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at

spacing of 450mm centre to centre, and fixing of boards to both side of frame work by 25mm long dry wall

screws on studs, floor and ceiling channels at the spacing of 300mm centre to centre. The boards are to be

fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99mm width

(0.9mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed

to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG)

plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks)

ACRYLIC SOLID SURFACE CLADDING : Providing & fixing of straight Paneling for walls & Columns

structures anchored in floor slab & celling, cladded with Acrylic Solid Surface 12mm thick sheets straight

fabricated on a single face, finished in matte finish, pasted with industrial grade silicon on a robust

substrate. Substrate shall be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per structural

requirement & duly painted with anti-rust red oxide coating and covered with 12 mm thick water proof ply as

3.21 MR per the design and dimensions approved. The proposal includes the cost of preparing appropriate 125 SQM 12,039.00 15,04,875.00

substrate surface over the civil structure provided, along with material cost & installation / fixing on straight

walls etc. for all wall cladding, Table Tops etc complete

5 Digitally signed by SANJAY

HONEYCOMB BLINDS : Providing & supplying of Window Blinds per the approved sample double

honeycomb shades with easy rise operating system as per following fabric specifications:

• Original Non-woven honeycomb shade shaving soft fabric appearance and high energy-efficient fabric

with high tear strength constructed out of Anti static, resilent, colour fast & Sanitized Treat 100% spun

bonded non woven polyester fiber & precision manufacture to form a hexagonally shaped duette pleat•

Pleat dimension ¾ "Honeycomb within a Honeycomb” with 3 air pockets for maximum energy efficiency.

• Shadings are duotone, with neutral tone facing the exterior and color facing the interior The Head rail

shall measure 49.68 wide and 36.66mm deep & thick 1.27mm extruded from 6063 T6 alu. alloy& shall be

powder coated to a smooth finish with a thickness of 40 microns. Fabric shall be constructed from spun-

bonded polyester fiber, precision manufactured to form a hexagonally shaped, dual pleat, cellular

construction. All cords & cord holes shall be fully concealed inside the fabric structure. As each of the

hexagonal cells is formed individually, pleats operate independent of each other providing superior pleat

retention & structure strength. Installation brackets. shall be of high tension spring steel suitable for

overhead & wall mounting 30mm Duette Hartford mounting bracket. Head rail covered with Sydney

3.22 MR Valance of height 80mm made up of Aluminium & L shape moving Rail includes “Click & Engage" method 13 SQM 16,708.00 2,17,204.00

of dimension 50mmX55mmsticked with integrated moving rail magnets provide a streamlined look, reduce

centre light gap, and promote easier operation. Polyster cord. Shall be 0.9mm in diameter & of woven

hollow core end cap shall be molded acrylic color matched to the head & bottom rails. Bottom rail shall be a

single channel section, measuring 30mm wide and 12.5mmdeep & thickness 1-1.2mm extruded from 5005

H-16 alu. Alloy & shall be powder coated with a smooth finish to a thickness of 15- 25 microns. Hold-Down

bracket (optional) shall be molded in clear acrylic. It incorporates a pin for engagement with the bottom rail

end-cap. It shall be suitable for sill, face or side facing. Cord Equalizer shall be injection melded from

impact modified acrylic with a high flexural modulus

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with

3.23 MR external glazing as per details of Architect. Rate to include finishing exposed surfaces of the Pelmet with 77 RM 1,782.00 1,37,214.00

enamel paint of approved shade or 1mm laminate.

WINDOW CILL: Fabricate and install 250x200 (WxH), window cill along external windows. Cill to be

constructed out of 18 mm MDF, finished with 1mm. Thk laminate shade as per Engineer in charge’s

approval. Cost to include edge margin in teak wood and poilshed in colour matching laminate.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

6.13 superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 430 SQM 1,018.05 4,37,761.50

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick

13.4 12 mm cement plaster of mix :

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the

surface even and smooth complete.

13.60 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

13.60.1 Two or more coats on new work 1420 SQM 137.85 1,95,747.00

PLY: Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of

9.140 approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of

Engineer-in-Charge

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type 1500 SQM 1,084.60 16,26,900.00

4MM THICK MDF BOARD: Providing and fixing plain lining with necessary screws/nuts & bolts/ nails,

including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per

3.31 MR direction of Engineer-in-Charge

4mm thick MDF Board 900 SQM 273.00 2,45,700.00

ALUMINIUM FRAME: Providing and fixing 100 MM thick partition, frame work in 50x25x1.5mm Aluminium

Section placed at 600 mm centre to centre both ways ( horizontal & vertical) fastened to floor , ceiling and

3.32 MR horizontal member.The item includes providing and fixing 50mm thick polyester synthetic insulation as 660 SQM 955.12 6,30,379.20

insulation of 100 GSM. ( Frame colour to be as per the design like anodised black etc, including the

LAMINATE: Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss /

3.33 9.127 matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality 900 SQM 890.55 8,01,495.00

conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

THERMAL INSULATION: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool

conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags

3.34 12.57 fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete 140 SQM 307.35 43,029.00

as per directions of Engineer-in-Charge.

ECORESIN PANEL: Providing of Ecoresin panel of size 1220mm x 2440mm with variety of inlay between

panels of specified Gauge. The panels are made from ecoresin sheet with engineered polyester resin with

a thickness of 6 / 9.5 mm (+/- 5%)with a top/bottom finish as sandstone finish. The product conforms to

Class A impact rating in accordance with ANSI Z97.1-2004 at 1/8” thickness, has no detectable VOC off-

gassing as measured under ASTM standards D 5116 and D 6670, is GreenguardTM Indoor Air Quality

3.35 MR certified and has a minimum of 40% post-industrial recycle content certified by a recognized 3rd party 14 EACH 2,41,525.00 33,81,350.00

certification group, such as Scientific Certification Systems (SCS). The design of the product is based on

ecoresinTM as per specification & approval of Engineer-in-charge as per tender drawing.

6 Digitally signed by SANJAY

NEOLITH CLADDING: Providing Installing & Fixing with specified adhesive by Neolith, a sintered Stone

made up of granite minerals like quartz, fedspar with required strength and hardness. Waterproof,

Resistant to UV rays, scratches, lightweight and recyclable. Sheet size of 3250x1550 with a 6 mm

3.36 MR thickness. The colour shall be approved as per the choice of the Engineer in charge and as per the theme 500 SQM 1,497.57 7,48,784.12

of the project. The sheet shall be in SILK FINISH with perfect linear reflection. The cost shall include cutting

of the tile in different sizes -1200x600,1500x750.

3.37 WALLPAPER: Washable Vinyl Coated Wall covering as per approved make and pattern as approved by

the client/ Engineer in charge

TOTAL WALL FINISHING WORKS 58,41,339.80 1,18,07,146.32

4 MISCELLANEOUS WORKS

MODULAR KITCHEN - UNDER COUNTER STORAGE CABINETS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with

openable shutters and sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply , all ply to

be laminated with 0.8 mm laminate.All shelves should be supported on approved quality SS pins and shall

be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm

thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in

high gloss acrylic of approved. The cabinet boxes of floor units will be supported by 100mm height vertical

adjustable legs which will be covered with PVC skirting in brushed aluminum finish attached by hardware of

skirting. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and rawl plugs.

Only front face area of cabinets and skirting from floor to top of boxes shall be considered for

measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to

1000X560X710MM (approx.) and join together as per site requirements etc.

MODULAR KITCHEN - OVERHEAD STORAGE WALL UNITS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with

openable shutters and sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply. All ply to

be laminated with 0.8 mm laminate.All shelves should be supported on approved quality SS pins and shall

be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm

thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in

4.02 MR high gloss acrylic of approved. The unit shall be fixed to the floor/ wall/slab using metal screws of 20 SQM 12,165.00 2,43,300.00

appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall

be considered for measurement and payment. Cabinet boxes size would be varies from 400X560X710MM

to 1000X560X710MM (approx.) and join together as per site requirements etc.

Providing and fixing of Innotech with metal sides and quadro channels

Providing and fixing baskets

WATERPROOFING : Providing and laying water proofing treatment to vertical and horizontal surfaces of

depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @

4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions

4.03 22.3 including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 2360 SQM 774.25 18,27,230.00

1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including

rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual

bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps

at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

SHOP DRAWINGS: Providing of complete set of working drawings & structural design calcualtions

including finishing, MEP services, etc. and any other details as and when desired by Engineer Incharge/

client. Qualified professsional for the above purpose shall be appointed after due appproval from Engineer

for necessary statutory approvals/licenses of the local bodies such as fire NOC, MCD ,LNDO etc for entire

scope complex as desired by client.

DISMANTLING : Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false

4.05 15.57 ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 2600 SQM 46.50 1,20,900.00

meters lead as directed by Engineer-in-Charge.

4.06 1.1 Carriage of material by mechanical transport including loading unloading and stacking 1370 CUM 522.60 7,15,962.00

1.1.1 Lime, murrum, building rubbish UPTO 30 KM

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including

cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting,

4.08 hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and

10.16.2 bolted

Hot with special

finished shaped

seamless type washers

tubes etc. complete 50000 Kg 168.95 84,47,500.00

Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992

used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim

4.09 26.65 covered with concrete. This metal deck will be supported on structural steel beam with shear studs. 1420.00 SQM 1,630.00 23,14,600.00

(Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid

7 Digitally signed by SANJAY

Supply and installation of Horizontally Retractable Acoustical Wall(s)

Track and Rollers: Top hung system with track and heavy duty roller system. Supplied with necessary

track plates, track strips, threaded rods, nuts and washers, alignment pins etc. Tracks are supported by

adjustable steel hanger brackets connected to structural support pairs of 12mm diameter threaded rods.

Brackets supports the load bearing surface of the track. Track consists of natural architectural-grade

aluminum alloy capable to bear the per panel load of 800 Kgs. The transfer areas are provided with

aluminum junctions, switches and curves to ensure smooth transition of panels in the parking. The trolley is

made of steel and provided with stainless steel rollers to ensure durability and smooth operation held with

the 16mm bolt connected to the frame.

Suspension System: The ceiling track is to be fixed with an adjustable steel suspension of threaded rods.

This steel suspension should be adjustable to ensure absorbtion of the eventual deflection of the ceiling.

The threaded rods should be protected against corrosion.

Wall Panels: 110mm thick standard panels, filled with sound insulation materials are provided with MDF

cover boards. The panels are interconnected by means of a concave / convex interlocking aluminum

anodized profiles provided with an integrated EPDM magnetic strip and a vinyl acoustic seal running along

4.10 MR the height of the interlocking profile. The skeletal frame of each element is constructed of a non-deflecting 5.00 sqm 55405.00 277025.00

zinc coated steel tube with the aluminum anodized edge protecting profiles on both sides of the steel frame,

bolted together. The cover boards are of 16mm thick MDF board, held in acoustic free suspension with the

skeletal frame and within the side profiles. Each panel to have top and bottom operable EPDM pressure

seals operated by a crank handle to ensure optimum contact pressure of 1500N. The system is equipped

with an adjusting panel at one end of the wall. This panel normally at the closing end of the wall has a

telescopic adjusting panel built with the same materials as the other panels and is operated, together with

the top and bottom seals, by an internal three-way spindle mechanism. The telescopic sliding element

stroke is 120 mm. There are aluminum profiles provided on both sides of the walls for better acoustics. In

case of a provision of a door within the wall, the door frame jambs is provided with retractable seals for

complete and tight closure of the door panel to the floor. In case of a provision of double door within the

wall, there is a provision of active and inactive leaves for the door. Rrecessed door handles in satin

stainless steel fininsh are provided for the doors.

Sonic Barrier above False Ceiling: A sonic barrier between true slab and tracks is provided above false

ceiling to the true ceiling.

AUTOMATIC SLIDING DOOR : Providing and fixing AUTOMATIC Sliding door operator, compliant with

future European standards and produced according to the guidelines for power-operated windows, doors

and gates, BGR 232, the UVV and the VDE regulations. TÜV design tested for durability of 1 Million

Cycles, tested according to the low voltage guidelines, fulfils DIN 18650 standards, for framed glass door

application with dormakaba ST-Flex Profiles Systems, modular design including internal cover and with 10

mm toughened glass for 2 Nos sliding door panels and 2 Nos fixed panels, both sliding & fixed panels with

dormakaba ST-Flex framed profile system with Interlocking Seals. Operator & Frame Finish should be

Silver Anodized E6/C0, with operator dimensions (H x D) : 100 x 180 mm and of length as required to suit

the opening size given below.

Operators are of very sturdy design with Self balancing Panel suspension system and with Anti-Jump

fitting. The track profile should be separate from the main profile for enabling reduction in vibration

MR insulation, With backplate for easy Installation. Microprocessor-controlled control unit, Self-learning, with 3.00 Each 176187.00 528561.00

adjustable parameters for opening and closing speed, hold-open time and opening and closing force,

reversing when obstruction is encountered, with SMPS, Class of protection IP 20. Activators- dormakaba

Nemo Motion + Nemo Dual ( Safety& Motion) with EM Lock - Fail Safe, Program Switch with Key. ES 200

Easy, Max Panel Weight Carrying Capacity of 2 X 100 Kgs, Clear Passage Width = 700 - 2000 mm, Max

Clear Passage Height = 3000 mm. The system shall have constant power supply 230V+ 5%, 50Hz, AC .

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure

4.12 6.4 above plinth level up to floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 40.00 Cum 8288.35 331534.00

4.13 25.3 STRUCTURAL GLAZING : Providing, assembling and supplying vision glass panels (IGUs) comprising of

hermetically-sealed

all complete for the 6-12- 6 mm

required insulated glass

performances, as (double

per the glazed) vision drawings,

Architectural panel unitsasofper

drawings, as specified

Coloured tinted and as

float glass 6mmdirected by the Engineer-in-Charge.

thick substrate with reflective softThe IGUson

facebe#assembled

2, + 12mminAirgap

6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance

(i) (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading 250.00 Sqm 3377.50 844375.00

coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass

shall be decided by technical sanctioning authority as per the site requirement.

Providing and fixing Toilet cubicals with the following specifications

Thickness of Compact Laminate : 18 mm

Color of HPL Boards: As approved by Engineer-in-charge

Size of Cubicle : As per drawing

Door Size : 1995mm (H) x 610mm (W)

Divider Size : 1995mm (H)

Overall Height Of Cubicle : 2100mm (Including boom Gap of 100mm)

Accessories: Standard - Stainless Steel - 304 Grade accessories)

a) SS "U" Channel

c) SS Coat Hook

d) SS Privacy Thumb turn c/w Occupancy Indicator

e) SS Door Knob

f) SS Hinges with Cover

g) SS Shoe Box Leg 18mm - 316 Grade

h) Rubber Lining for Groove

i) S.S.Screws 304 G & P .V.C Wall Plugs

8 Digitally signed by SANJAY

Providing and fixing Urinal partitions with the following specifications

Thickness of Compact Laminate : 12 mm

Color of HPL Boards: As approved by Engineer-in-charge

Size of UMP : 1200 mm (W) X 500 mm(H) AND 900 mm (W) X 450 mm(H)

Overall Height Of Cubicle : 1850 mm (Including bottom Gap of 650mm)

4.15 MR Accessories: Standard – Stainless Steel - 304 Grade accessories) 5.00 Sqm 12233.00 61165.00

a) Right Angle Brackets

b) S.S.Screws 304 G & P.V.C Wall Plugs

Supply and installation of Aluminium Glass railing system of approved make ; fixed with runner,base runner

,handler and all other nessesary accessories as per standerd including 12mm toughened glass. Max railing

height of 1000 mm from FFL or as indicated in drawings with necessary rubber beading, base cap, etc.

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural

drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS

1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required

colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as

4.17 25.1 cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra 9000.00 Kg 370.45 3334050.00

shall be paid on this account).

The weight of aluminium extruded section shall be taken for purpose of payment.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of

25.2 structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights

and all levels, including:

a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to

IS 875 part IIIand

Fabricating (thesupplying

system must passed

serrated the proof

M.S. testgalvanised/

hot dip at 1.5 timesAluminium

design wind pressure

T5 brackets of

required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect

b) verticality and fixing structural glazing system rigidly to the RCC/ masonry/ structural steel framework of

building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic

contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required

Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant

compatible with the structural silicone sealant of required bite size in a clean and controlled factory/ work

c) shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved

grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for

4.18 d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and

Making as requiredfor

provision as drainage

moisture/ to seal that

water the gap between

enters the building

the curtain structure

glazing systemandtoallmake

watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom

(if required), making necessary holes of required sizes and of required numbers etc. complete. This item

includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation

of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary

structures and services, cranes or cradles etc. as described above and as specified. The item includes the

cost of getting all the structural and functional design including shop drawings checked by a structural

designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site,

cost of all samples of the individual components for testing in an approved laboratory, field tests on the

assembled working structural glazing as specified, cleaning and protection till the handing over of the

building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all

the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item

description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge.

Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section

The NIT for fixing inauthority

approving the grooves of the curtain

will decide glazingof

the necessity and vermin

testing on proof stainless

the basis steel

of cost wirework,

of the mesh shall

test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted

in the NABL accredited lab or any other accreditation body which operates in accordance with ISO/ IEC

17011 and accredits labs as per ISO/IEC 17025

1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM

E-283-04 testing method for a range of testing limit 1 to 200 mVhr

2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to

3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto

4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind

pressure without any failure) as per ASTME-330-10 testing method for a range upto 50mm

5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test, Tests

to be conducted on site.

6. Onsite Test for Water Leakage for a pressure range 50kpa to 240 kpa (35psi) upto 2000 ml

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel

Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all

levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure

equalisation or rain screen principle as required, proper drainage of water to make it watertight including

checking of all the structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan

shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material

consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm

thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /

Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer

(Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats,

weather silicone sealant, backer rods etc.

9 Digitally signed by SANJAY

c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and

serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved

4.19 8.32 make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per 150.00 Sqm 4474.20 671130.00

specification and drawing The item includes cost of all material & labour component, the cost of all mock

ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests

on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of

the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation.

Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall

provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all

complete , as per the Architectural drawings, as per item descriptio for Qualitative test, Tests to be

conducted on site.

6. Onsite Test for Water Leakage for a pressure range 50kpa to 240 kpa (35psi) upto 2000 ml all the

performance characteristics etc. all complete as required, as per the Architectural drawings, as per item

description, as specified, as per the approved shop

TOTAL MISCELLANEOUS WORKS 2,73,33,568.50 49,18,331.00

10 Digitally signed by SANJAY

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

S NO TOTAL AMOUNT TOTAL AMOUNT

S NO TOTAL AMOUNT TOTAL AMOUNT

NO DESCRIPTION UNIT QUANTITY RATE

2021 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN

MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY) with chrome

MR 1 finish having plate size of 215X 105 mm, spout depth min 30mm and 55 mm and plate to tap EACH 10 16080.00 160800.00

distance minimum 200 mm as per the direction of enginner incharge

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE:

MR 2 630x460x130mm of approved make size and shape as per the direction of enginner incharge EACH 10 20890.00 208900.00

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING

MR 3 32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP EACH 10 2398.00 23980.00

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL

PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES &

MR 4 WALL FLANGE with chrome finish of approved make size and shape as per the direction of EACH 10 3284.00 32840.00

enginner incharge

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL

HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES

SET, SIZE: 375X520X400 MM

MR 6 Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE EACH 9 6641.00 59769.00

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH

MR 8 ADJUSTABLE WITH WALL FLANGE 15mm EACH 9 4965.00 44685.00

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH

MR 9 8mm DIA 1.2 METER LONG FLEXIBLE TUBE AND WALL HOOK EACH 9 2541.00 22869.00

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE PIECE SLIM

CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE

MR 10 CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE) EACH 9 8044.00 72396.00

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28 complete.

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) complete with 6mm thick

hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

13 quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 20 500.35 10007.00

Digitally signed by SANJAY

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse

17.61 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and

pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 9 362.40 3261.60

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching

surface after housing G.I. pipe etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the

18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

17 20mm nominal outer dia pipes 325.10 13004.00

18.7.3 25mm nominal outer dia pipes METRE 40 408.55 16342.00

18.7.4 32mm nominal outer dia pipes METRE 20 500.95 10019.00

18.7.5 40mm nominal outer dia pipes METRE 20 674.35 13487.00

18.7.6 50mm nominal outer dia pipes METRE 20 927.00 18540.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing.

18.8 18 This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete as per direction

of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes METRE 30 441.15 13234.50

18.8.2 20mm nominal outer dia pipes METRE 40 513.75 20550.00

18.8.3 25mm nominal outer dia pipes METRE 20 626.05 12521.00

18.8.4 32mm nominal outer dia pipes METRE 20 712.75 14255.00

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

19 standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 2 708.40 1416.80

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all kind of soils, suspended

from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.

alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

20 nominal size) including cost of shuttering for proper completion of the work, breaking and

MR making good the walls and floors etc. after pipes have been duly laid and tested. The rubber

ring shall confirm to IS:5382.

Digitally signed by SANJAY

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-

in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 100.00 536.00 53600.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 20.00 416.00 8320.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

MR 21 clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 18 726.00 13068.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round

cover with screws and other required fitting complete as required.

Supply, Installation, Testing and Commissioning of 15 litre geyser, Power Consumption: 2000

W, 15 L Greater the Capacity, more the users can be served for bath/wash

0.8 Bar : Pressure rating >8 bar is suitable for High Rise buildings and vertical/horizontal as

decision of engineer-incharge/ client

warranty : INNER CONTAINER -7 YEARS, HEATING ELEMENT-2 YEARS,

COMPREHENSIVE-2 YEARS

Providing and fixing white vitreous china battery based infrared sensor operated urinal of

approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml

17.80 37 consumption), having water inlet from back side, including fixing to wall with suitable brackets Each 5 7004.45 35022.25

all as per manufacturers specification and direction of Engineer-in-charge

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

5 17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting

and making good the walls wherever required :

17.10.1 Kitchen Sink with Drain Board

Digitally signed by SANJAY

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS-H (Fire

Retardant Low Smole, Low Halogen) PVC insulated copper conductor single core cable in

surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI

1.3 box and earthing the point with 1.5 sq.mm. FRLSH PVC insulated copper conductor single

core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS-H (Fire Retardant Low Smole, Low Halogen) PVC insulated

copper conductor single core cable in surface / recessed PVC conduit, and earthing the point

1.54 with 1.5 sq.mm. FRLSH PVC insulated copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS-H (Fire Retardant Low Smole, Low

Halogen) PVC insulated copper conductor single core cable in surface/ recessed medium

class PVC conduit alongwith 1 No 4 sq. mm FRLSH PVC insulated copper conductor single

A.3 1.12 core cable for loop earthing as required. Metre 3920 334.00 1309280.00

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 97 122.00 11834.00

1.24.5 6 pin 15/16 amp socket outlet Each 32 197.00 6304.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

A.6 1.26 excluding modular plate as required. Each 50 40.00 2000.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING 14

Digitally signed by SANJAY

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS-H (Fire

Retardant Low Smole, Low Halogen) PVC insulated copper conductor, single core cable in

1.14 surface/ recessed medium class PVC conduit as required

B.1 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 500 334.00 167000.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 250 439.00 109750.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 200 1005.00 201000.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 200 1365.00 273000.00

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following FRLS-H armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

MR Conductor Cables :

Supply of following sizes of PVC sheathed PVC/insulated Aluminium conductor armoured

C.2 cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(c ) 3.5 C x 70 Sqmm LSZH cable RM 150 890.00 133500.00

Supply of following sizes of copper cables -PVC sheathed PVC insulated Copper conductor

C.3 armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

(a) 4 C x 16 Sqmm FRLS-H copper cable RM 50 1751.00 87550.00

(b) 4 C x 25 Sqmm FRLS-H copper cable RM 50 2729.00 136450.00

(c ) 3.5 C x 35 Sqmm FRLS-H copper cable RM 20 2491.00 49820.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

D.2 connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, MCB in the existing isolator/ MCB

2.13 DB complete with connections, testing and commissioning etc. as required.

Digitally signed by SANJAY

MR 100 amps MCCB/isolator Each 1 7223.00 7223.00

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

2.4 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/ RCCB/ Isolator/MCCB)

MR 12 way (4 + 36), Double door Each 5 9081.00 45405.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

residual current circuit breaker (RCCB)/MCB, having a sensitivity current upto 300

2.14 milliamperes in the existing MCB DB complete with connections, testing and commissioning

etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supplying and fixing following modular switch / socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 10 148.00 1480.00

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 300 47.00 14100.00

surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

E.12 conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with connectors

4.1 suspended from the cieleing with MS suspenders including bolts and nuts painting suspenders

etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 100 1137.00 113700.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe of SET 2 13838.00 27676.00

2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 200 70.00 14000.00

G PANEL BOARDS

Digitally signed by SANJAY

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with

rear access for cable alley and with segregated bus-bar chamber with tinned aluminium bus

bar and including supplying and fixing following switchgears, meters and accessories, inter-

connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram: The panel should come with in built gas

suppression system for fire safety. fire seperation should be included from OEM

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

G.1 MR Colour: Gray Powder Coated, as per approved sample.

1 nos, 250 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 35 KA (ICS=ICU up to 433 V) complete in all respect. Metering device like ampere

meter, voltmeter, CT 250/5 - 3 nos, phase indication lamp RYB, complete in all respect

4P aluminum bus bars of minimum of 320 Amps capacity with heat shrinkable colored sleeves

and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size

supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -2 Nos.

(b) 40 Amps, TPN, MCB -6 Nos.

(c) 32Amps, TPN, MCB - 6 nos

Panel complete as above Each 1 180000.00 180000.00

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with

rear access for cable alley and with segregated bus-bar chamber with tinned aluminium bus

bar and including supplying and fixing following switchgears, meters and accessories, inter-

connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram: The panel should come with in built gas

suppression system for fire safety.Fire seperation should be included from OEM

Type of construction: Form 3

Digitally signed by SANJAY

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

G.2 MR Colour: Gray Powder Coated, as per approved sample.

1 nos, 100 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 35 KA (ICS=ICU up to 433 V) complete in all respect. Metering device like ampere

meter, voltmeter, CT 100/5 - 3 nos, phase indication lamp RYB, complete in all respect

4P aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored sleeves

and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size

supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -1 Nos.

(b) 40Amps, TPN, MCB - 4 nos

Panel complete as above Each 2 200000.00 400000.00

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2

17 2.21 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 6 269.00 1614.00

front side as required

Supply, Installation, Testing and Commissiong of 10 KVA True Online Double Conversion UPS

3Phase Input - 3Phase Output in Parallel Redundant N+1 Configuration IGBT Based Rectifier

and IGBT Based Inverter Batteries:12 V, SMF with minimum VAH capacity of approx 8600

suitable for 15 minutes backup with each ups Along with Accessories Rack, stand for battery,

Interlinks, SFU, Parallel Kit, DC Cable Upto 5 Meters complete in all respect as per the

directions of the engineer in charge. UPS should have availability of Input /Output isolator,

Inbuilt manual bypass along with phase sequence corrector. UPS Efficiency shall not be less

than 94% from 25% to 100% Load

Total of Electrical items 4173408.00 1625817.00

Digitally signed by SANJAY

SCHEDULE OF QUANTITIES - Lighting WORKS

S. No. Item Description Unit Quantity Rate Amount

Supply, Installation, Testing and Commissioning of Surface mounted linear wall

grazer light with LED (Light Emitting Diode), system power: 36W, luminous flux of

luminaire 2880 lm, colour temperature of 3000k/4000K/ 6000k, 230V constant

current driver, 70% of luminous flux after 50,000 operating hours, energy efficient

LEDs, direct light emission, luminaire housing in aluminium, powder coated grey,

with lens. IP65. L-1200mm as per approval of engineer incharge

Supply, Installation, Testing and Commissioning of 15W LED Recessed

adjustable COB downlight round shape made of die cast aluminium housing,

sarated ribs robust heat sink for excellent thermal management.It consist of high

efficiency aluminium metalised faceted reflector to produce excellent light

2 distribution. Nos 118 1968.00 232224

Constant Current Driver with Power Factor above 0.9 avilable in

3000K/4000K/6000K with CRI above 80,Compliance with LM 80 Standards with

L70-50,000 burning hours Life, Efficacy -≥90 lm/W, IP PROTECTION -IP 20 as

per approval of engineer incharge

Supply, Installation, Testing and Commissioning of sleek anodised aluminium

profile with 12W/mtr LED strip light for cove lighting. Constant Current Driver with

3 Power Factor above 0.9 avilable in 3000K/4000K/6000K with CRI above Mtr 113 3053.00 344989

80,Compliance with LM 80 Standards with L70-50,000 burning hours Life,

Efficacy -≥80 lm/W, IP PROTECTION -IP 20 as per approval of engineer incharge

19 Digitally signed by SANJAY

Supply, Installation, Testing and Commissioning of 15w Suspended / Surface

mounted cylindrical COB downlight with extruded aluminum housing & die casted

heat sink for excellent thermal management.It consist of high efficiency aluminium

metalised faceted reflector to produce excellent light distribution.

Constant Current Driver with Power Factor above 0.9 avilable in

3000K/4000K/6000K with CRI above 80,Compliance with LM 80 Standards with

L70-50,000 burning hours Life, Efficacy -≥80 lm/W, IP 20 as per approval of

engineer incharge

Supply, Installation, Testing and Commissioning of hanging Chandelier made of

K9 Crystals of different shapes made of MR 16 LED Lamps. Crystals to be

hanged with wire cluster mounted on SS-304 grage plate. Constant Current Driver

with Power Factor above 0.9 avilable in 3000K with CRI above 80,Compliance

with LM 80 Standards with L70-50,000 burning hours Life, Efficacy -≥40-50 lm/W,

IP PROTECTION -IP 20 having minimum size of 6ft x 4ft complete in all respect

philips or equivalent. As per approval of engineer in charge and requirement of

20 Digitally signed by SANJAY

Supply, Installation, Testing and Commissioning of fabric false ceiling / wall

formed out with TRANSLUCENT Printed fabric coverings made out of polyester

knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric

width of 2m, 3m, 4.1m &5.1m with weight of 200gm/m2, thickness of 0, 3 mm.

The appearance of fabric is matt, smooth and uniform with blanq color and light

transmission of 50%. The tear strength of fabric should be accordance to CH:

4,5daN; TR: 6,5 daN. The fire rating should be accordance to B-S1, d0. The fabric

should be humidity resistant and free of carcinogenic substances(CMR) or volatile

organic Compounds (VOC’s). At labeling in accordance with the French decree

no. 2011- 321, Oeko-Tex standard100 certified. Fabric should be installed with

6 approved manufacturer guidelines. It comes with 10- year manufacturer SQM 46 22391.00 1029986

guarantee. The installation of TRANSLUCENT Printed fabric should be dry

installation & done at room temperature using PVC, Grippers. ceiling base to be

made of MS or Wooden frame finishing to a flush finish of tapered and square

edges in desired design as per architect specification. Supply of LED Lights

behind the Fabric Wall/ False ceiling in modules/ PCB with recommended

wattage as per manufacturer's standards to give an effect of ambient lighting. ,

LED spacing / Pitch should be atleast 73 -80mm with beam angle of 170 degree,

Colour temperature shoud be as per design intent 3000K/4000K/6000K. Wattage

of 8-10W/mtr. LED modules/ PCB should be positioned properly to provide an

even light flow, casting noshadows or dark spots. LED Driver Cost included.

21 Digitally signed by SANJAY

Supply, Installation, Testing and Commissioing of Pendant/Recessed luminaire

with LED (Light Emitting Diode), system power 28 W, luminous flux of luminaire

3080 lm, 110 LM/W system efficacy, direct light emission CRI>80, colour

temperature of 4000K, Neutral white, 230V constant current driver, 70% of

luminous flux after 50,000 operating hours, energy efficient LEDs, luminaire

profile in aluminium, Plastic moulded end caps, Polyester powder Aluminium

white coloured coat applied over a 5- stage pre-treatment, high efficiency glare-

7 free snap fit micro-prismatic diffuser for homogeneous light distribution, ZHLS Nos 28 4000.00 112000

(Zero Halogen Low Smoke) internal wiring, integral Electronic control gear,

adjustable suspender,

Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max = 1500

mm as per approval of engineer in charge.

Supply, Installation, Testing and Commisioning of Recessed downlight with LED

(Light Emitting Diode) system power: 5W, Luminous flux of luminaire 400 lm,

Colour temperature of 4000 K, Warm white, CRI > 80, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LED,

direct light emission, housing in die-cast aluminium, Polyester powder white

coloured coat applied over a 5-stage pre-treatment ceiling trim, with reflector,

beam angle of 24°, Electronic control gear,

Protection class II, IP 20,

Ø = 40 mm, DA(ø) = 35 mm, H = 58 mm As per approval of engineer in charge

and requirement of client

22 Digitally signed by SANJAY

Supply, Installation, Testing and Commisioning of Round Ring shaped

Suspended mounted LED Ceiling luminaire with Downlight distribution with Ring

shaped Diffuser having system power: 70W, Luminous flux of luminaire 7000lm,

direct light emission, CRI > 80, 230V constant current driver, 70% of luminous flux

after 50,000 operating hours, energy efficient LEDs with Dia. (Ø) 1200mm with

Opal PC/PMMA diffuser for homogenous uniform, soft and glare free light

distribution, luminaire housing profile in extruded aluminium with efficacy of

9 100Lm/W, Power Factor of more than 0.90 & CCT - 4000K/5700K, Powder Nos 3 32811.00 98433

coated White/Black coloured, Internal wiring along with Integral Electronic Driver

having an in built Surge Protection of 2.5kV, Adjustable wire suspension,

Protection class I, IP20.

Supply, Installation, Testing and Commisioning of Pendant Linear Track luminaire

with spots, System power: 24W ( 2 x ( 2 spots (in 300mm) of 6W each), the

luminous flux of 2160 lm, 4000K, Neutral white, Direct light emission, 230V

constant current driver, 70% of luminous flux after 50,000 operating hours,

Aluminium profile powder coated White/Black, Electronic Control Gear, Protection

L = 1000 mm, B = 52 mm, H = 75 mm, 2 x 2 Spots in 300mm, Blankers 400mm

(1 nos.) As per approval of engineer in charge and requirement of client

23 Digitally signed by SANJAY

Supply, Installation, Testing and Commissioing of Linear Suspended mounted

LED Ceiling luminaire with Up-Downlight distribution with Dark Lens for Direct

Lighting & Opal diffuser for Up Lighting having system power: 28W/4ft. (8W Up,

20W Dn), Luminous flux of luminaire 2100 lm/4ft, Direct-Indirect light emission,

CRI > 80, 230V constant current driver, 70% of luminous flux after 50,000

operating hours, energy efficient LEDs integrated with Dark Lens micro reflector

louvres for high efficiency with 80 degree beam angle giving UGR value less than

19 for Down Lighting, limited luminance for beam angle above 65° all around

giving Direct glare limitation in accordance with UGR < 19 & Opal diffuser for

homogenous light distribution for Up lighting, Luminaire housing profile in

11 extruded aluminium with end caps with efficacy of 75Lm/W, Suitable for Individual Nos 10 12750.00 127500

Installation, Power Factor of more than 0.90 & CCT - 4000K/5700K, Powder

coated White/Black coloured, Internal wiring along with IntegralDriver having an in

built Surge Protection of 2.5kV, Sliding/fixed adjustable wire suspension,

Protection class I, IP20. L = 1145mm, B = 44 mm, H = 77 mm As per approval of

engineer in charge and requirement of client

Supply, Installation, Testing and Commisioning of Wooden Base with PVC Shade

Floor Lamp with Lamp: E-27 LED 14W x 1 of Depth 580 mm and Height 1830

Supply, Installation, Testing and Commisioning of Chrome & Rose gold clear

13 glass pendant with Lamp: G9 5W x 1 of Depth 195 mm and Height 1200 mm As Nos 10 3238.00 32380

per approval of engineer in charge and requirement of client

Supply & installation of hanging 20W filament/LED based Edison bulb with holder

& wire for hanging arrangement -IP 20 As per approval of engineer in charge and

requirement of client

24 Digitally signed by SANJAY

Supply & Installation of 2x12w wall mounted cylindrical shape outdoor light with

extruded aluminum housing & die casted heat sink for excellent thermal

management.It consist of high efficiency aluminium metalised faceted reflector to

produce excellent light distribution.

15 Constant Current Driver with Power Factor above 0.9 avilable in Nos 10 6350.00 63500

3000K/4000K/6000K with CRI above 80,Compliance with LM 80 Standards with

L70-50,000 burning hours Life, Efficacy -≥80 lm/W, IP 65 As per approval of

engineer in charge and requirement of client

Supply & Installation of 10w spike garden light with corrosion proof die cast

aluminum housing & heat sink for excellent thermal management.It consist of

high efficiency aluminium metalised faceted reflector to produce excellent light

16 Constant Current Driver with Power Factor above 0.9 avilable in Nos 10 4200.00 42000

3000K/4000K/6000K with CRI above 80,Compliance with LM 80 Standards with

L70-50,000 burning hours Life, Efficacy -≥80 lm/W, IP 66 As per approval of

engineer in charge and requirement of client

Supply, Installation, Testing and Commisioining of Flame Proof LED Light in

17 Kitchen As per approval of engineer in charge and requirement of client Nos 6 5000.00 30000

25 Digitally signed by SANJAY

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

EM 2018 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 1.0 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C per HP 110 16415.00 1805650.00

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER

not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

2 2.0 single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree

C WB temperature.

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"

4 4 Joints i.e. Refnet Joints/ Header with Insulation for refrigearnt piping

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

5 5 complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

5.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 600 245.00 147000.00

5.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 400 331.00 132400.00

5.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 200 466.00 93200.00

5.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

Digitally signed by SANJAY

5.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 200 707.00 141400.00

5.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 200 865.00 173000.00

5.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1022.00 51100.00

5.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1108.00 55400.00

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

Cable Trays with Covers

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray

7 4.6 (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc. as required.

7.1 4.6.8 300mm widthx62.5mm depthx2.0mm thickness meter 100 1190.00 119000.00

7.2 4.6.10 450mm widthx62.5mm depthx2.0mm thickness meter 100 1474.00 147400.00

Supply,installation,testing and commissioning of PVC drain water with necessary clamps,

fittings such as bends tees etc. and duly insulated.

8 MR 40 mm dia (9 mm tick ins.)

Supply, Installation, Testing and Commissioning of Central Advance Intelligent Control

Manager with touch color LCD Display, Suitable for automatic control of all indoor units by

9 MR schedule function, troubleshooting, auto heat/cool changeover, temperature limitation, history Each 1 85765.00 85765.00

function, etc., complete as per technical specifications, capable of connecting upto 64 nos.

indoor units as required.

Total HVAC WORKS 4554766.00 423677.00

Digitally signed by SANJAY

SCHEDULE OF QUANTITIES - DATA and VOICE WORKS

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

A. UTP Components for Data

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

(DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250

1.53.1) MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, Blue

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

3 MR at Work Station end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow Nos. 11 310.00 3410.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

4 MR at Rack Side. Keystone Unshielded Outlet, 180DG C6, Blue Nos. 33 310.00 10230.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

5 MR at Rack Side end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow Nos. 11 310.00 3410.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

6 MR information outlet (I/O) to end user device connectivity.High Speed Gigabit 24AWG Nos. 33 310.00 10230.00

U/UTP Patch Cord Blue, LSZH, C6, 2M

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

7 MR information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 33 950.00 31350.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

8 MR information outlet (I/O) to end user Redantant device connectivity.High Speed Nos. 11 400.00 4400.00

Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow)

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

9 MR information outlet (I/O) to Rack End Redantant device connectivity.High Speed Nos. 11 400.00 4400.00

Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow)

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

10 MR Jack Panel for CAT6 cable termination at rack end. Data Active Nos. 1 4334.00 4334.00

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

11 MR Jack Panel for CAT6 cable termination at rack end. Data Active Redandant Nos. 1 4800.00 4800.00

SITC of 04 core OM3 Multimode fiber orange color 50/125, minimum bending

13 MR SITC of OS2 G.652.D 1-fibre, buffered, LC Duplex, LC to pigtail, 1m. Set 6 247.50 1485.00

B 200 Pair MDF Box

1 MR 10 Pair Krone Module Nos. 2 900.00 1800.00

2 MR 25 Pair Riser Cable Armoured jelly filled cable for Telephone Mtr. 300 1253.00 375900.00

GRAND TOTAL 112860.00 511812.33

GRAND TOTAL 112860.00 511812.33

28 Digitally signed by SANJAY

S No Description UOM Qty Rate Amount

A. Active Component for Data, Wifi

Supply instllation testing and commissioning of Access Switch of 48 x 1G POE+, 4 x

SFP+ , 370W PoE, Switching Capacity of switch is of 176 Gbps having Forwarding

performance (64-byte packet size): 130 Mpps, Secure Shell (SSH), RADIUS, TACACS

+ DRAM 2GB , Flash 2GB , 10K IPv4 Routes ,1K multicast Routes ,16K MAC address ,

1 16K flow entries L3 Protcols like OSPF , PBR, MACsec, PIM , QOS from day-1 , As Nos. 1 195707.00 195707.00

Approved by NSL Incharge.

Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets the growing

requirements of wireless networks by delivering a better user experience. The 1830

Series extends support to a new generation of Wi-Fi clients, such as smartphones,

2 tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave 2 Nos. 12 61240.00 734880.00

Supplying, installation, testing and commissioning of WLC should support 50 access

points from Day 1 and scalable for upto 4000 AP's without Software/hardware change.

Proposed WLC should be On-Prem/cloud based, and should be hosted in

India.Controller shall support minimum 20000 concurrent sessions from a single

account.WLC should provide Guest management system with Voucher based

3 authentication, local SMS server integration for OTP, Google and Facebook Nos. 1 224560.00 224560.00

authentication. Should support major SMS gateway provider. Same controller should

manage & configure Wireless AP & Network Switch through single dashboard.

Supply, Installation, testing and Commisioing of SFP Modules 10G

Total : A - Active Component for Data, Wifi 1295147.00

29 Digitally signed by SANJAY

SCHEDULE OF QUANTITIES - CCTV

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265

Vandal Proof Dome camera with 2.8 to 12mm Motorized

Lens,Smart IR, up to 30M IR distance,Up to 120 dB WDR (Wide

Dynamic Range),3D DNR (Digital Noise Reduction),H.265+,

H.265, H.264, MJPEG,Corridor mode, Triple streams,3-Axis,

IP67, IK10 Vandal Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0

Lux with IR,Video Compression H.265+, H.265, H.264,

MJPEG,Behavior Detection Intrusion, Crossing line, Motion

1 MR detection, Object left, Missing object,Intelligent Identification Face Nos 10 11000.00 110000.00

detection, Defocus, Scene Change,PoE (IEEE802.3 af) Power

consumption: Max 7.2W,Edge Storage Micro SD Card, Up to

256GB, ANR Support,Working Environment -40°C ~ +60°C,

Humidity ≤ 90% RH(Non-condensing),Compatible Integration

ONVIF (Profile S/G), API.

Supply, installation, testing and commissioning of UL Listed ,5

MP IR bullet camera , ONVIF profile S & G ,UL , CE , FCC

Certified ,1/2.8” Progressive Scan CMOS ,2.8 mm to 12 mm

motorized varifocal lens ,min illumination : 0.05 Lux @

(F1.2,AGC ON), 0 Lux with IR , Auto switch IR cut filter ,SD card

support ,1 input / 1 output audio support ,Shutter Speed : 1/5 ̴

2 MR 1/100,000 s , 120 dB WDR , Video Compression : H.265 ,H.264 Nos 2 19218.00 38436.00

, frame rate : 30fps @ 3MP ,Edge analytics : line crossing ,

perimeter intrusion ,Face detection , cross counting , stationary

object , In built IR LED , IR Distance upto 40 meters , IP 66 ,

Total : A - CCTV 148436.00

30 Digitally signed by SANJAY

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent analog addressable

1 17.2.4 photothermal detector complete with mounting base complete as required. No 102 2858.00 291516.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed

2 17.2.5 MS Box having two LED, metallic cover complete with all connections etc as required. No 51 276.00 14076.00

Supplying, installation, testing & commissioning of intelligent addressable thermal detector

3 17.2.9 with rate of rise cum fixed tempreature thermistor complete with base as required. No 4 2726.00 10904.00

Supplying, installation, testing & commissioning of fault isolator complete with base as

Supplying, installation, testing & commisssioning of intelligent addressable programmable

5 17.2.6 sounder complete as required. No 4 2651.00 10604.00

Supplying, installation, testing & commissioning of addressable fire control module complete

Supplying, installation, testing & commissioning of addressable phone control module

7 17.2.11 complete as required. No 2 3267.00 6534.00

Supplying, installation, testing & commissioning of addressable manual call point complete

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB,

11 17.3.1 MP3 player (including 6 zone button paging station) with seamless integration facility with No 1 126411.00 126411.00

main fire alarm panel for voice evacuation complete as required

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms

13 17.3.7 operating at 240 Volt AC Supply complete as required. NOS 2 145793.00 291586.00

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

14 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath Mtr. 612 173.00 105876.00

complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

existing surface / recessed steel conduit of following pairs, cores and size including

15 connections and interconnections etc. as required.

17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 300 89.00 26700.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries

16 17.5.4 and accessories like coupler etc. as required. Metre 300 53.00 15900.00

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

17 M.R. backup complete as required. NOS 6 3870.00 23220.00

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with

19 17.3.9 microphone assembly complete as required. NOS 1 81756.00 81756.00

Digitally signed by SANJAY

Supply, Installation, Testing and Commisioning of Loop Card capacity of 159 detectors For

20 MR BMS Fire integration compatible with existing system Nos 1 92150.00 92150.00

Supply, Installation, Testing and Commisioning of Interface Card for BMS fire integration

compatible with exisiting system

Supply, Installation, Testing and Commisioning of repeater panel having 640 character liquid

22 MR crystal with backlit control compatible with existing system Nos 1 90000.00 90000.00

Supply, installation, Testing and Commisioing of 12 U Rack

TOTAL FIRE ALARM WORKS 1097703.00 288281.40

Digitally signed by SANJAY

SCHEDULE OF QUANTITIES - EPABX

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

Supply Installation, Testing and Commissioning of Analog Speaker Phone with

33 Digitally signed by SANJAY

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

S No DSR DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

2022/ MR AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

18.7 suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

1 as required :

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree centigrade

2 with required accessories :

18.21.1 Pendant type 148 Each 522.00 77256.00

Supplying, installation, testing & commissioning of sprinkler

flexible pipe (UL Listed) of stainless steel complete with 15

NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line

3 18.25 (Inlet) 25mm NPT male thread to sprinkler head (Outlet)

15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes complete

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per

manufacturer's specifications.

Digitally signed by SANJAY

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 4 NOS 7500.00 30000.00

Mechanical Foam gas cartridge type. 9 Kg capacity

ABC dry powder stored pressure type 6 kg capacity

Digitally signed by SANJAY

SCHEDULE OF QUANTIITES: AV SYSTEM

S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount

A. AV System Training Room 70 PAX ( Third Floor )

98" main LED display SITC of 98" smart 4K LED Display,Native Resolution 3840 x 2160 (UHD),

Brightness Minimum 490cd/m2, Inputs HDMI-3,USB(3.0)-3,USB-(2,0)-

2,OPS Slot-1,RGB-1, LAN-1,SPDIF-1 or Higher, Output Audio-1(

Audio out to connect additional Speakers if required) , Built in Touch type IR

spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or less, Operating

System Support Windows 7/8/10/Windows XP/Linux/Mac/Android

(Windows XP/Linux/Mac Support one point touch) , Multi touch point Min 20

Points or Higher, White Board ,Writing, Pen, Palm Eraser ,Save, Screen

Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or better , Internal

1 Memory (32GB),(Hisi 811, Dual core A73+Dual core A53), DDR(4GB), Wi- 1 Nos. 8,49,545.00 8,49,545.00

Fi, Power Indicator, or higher, Screen Share/Mira cast to Connect

TAB/Mobile, Web Browser , 100-240V~, 50/60Hz, 32W(16W x 2) or higher

, ISO9001, ISO14001,ISO45001,

The display should be a smart screen and touch enabled alongwith

stylus/pen. The display should also have provision for OPS PC.

55" main LED display SITC of 55" smart 4K LED Display,Native Resolution 3840 x 2160,

Brightness Minimum 390cd/m2, Inputs HDMI-3,USB(3.0)-3,USB-(2,0)-

2,OPS Slot-1,RGB-1, LAN-1,SPDIF-1 or Higher, Output Audio-1(

Audio out to connect additional Speakers if required) , Built in Touch type IR

spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or less, Operating

System Support Windows 7/8/10/Windows XP/Linux/Mac/Android

(Windows XP/Linux/Mac Support one point touch) , Multi touch point Min 20

Points or Higher, White Board ,Writing, Pen, Palm Eraser ,Save, Screen

Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or better , Internal

2 Memory (32GB),(Hisi 811, Dual core A73+Dual core A53), DDR(4GB), Wi- 9 Nos. 60,370.00 5,43,330.00

Fi, Power Indicator, or higher, Screen Share/Mira cast to Connect

TAB/Mobile, Web Browser , 100-240V~, 50/60Hz, 20W(10W x 2) or higher

, ISO9001, ISO14001,ISO45001,

The display should be a smart screen and touch enabled alongwith

stylus/pen. The display should also have provision for OPS PC.

Ceiling speakers Supply, Installation, testing and commissioning of 6.5" two-way coaxial thin

edge ceiling loudspeaker, 100V transformer power taps : 24,12,6, watts,

Conical dispersion : 145° or more, impedance : 8, low impedance RMS

continous power : 30watts, frequency range : 50 Hz - 20 kHz or better,

7 frequency response : 60Hz - 20KHz or better etc complete required as per 8 Nos. 8,437.00 67,496.00

specifications.

36 Digitally signed by SANJAY

Amplifier Supply, Installation, testing and commissioning of quad channel Amplifier, 4

X 120watt or more, THD+N (@ 1 kHz) : < 0.3%, Technology : Class-D,

Common mode rejection ratio : 70dB or better, Temperature controlled FAN,

Switching mode power supply, should have Protection features like : DC

8 Short circuit & Over heating & Over load & Signal limiting etc, Built-in high 1 Nos. 1,36,607.00 1,36,607.00

pass filter and gain adjustment option etc complete required as per

specifications.

Speaker Cables Supply, installation, testing and commissioning of of 2.5 Sqmm x 2 core

11 ATC copper Conductor, Insulated Cores,PVC Sheathed Speaker Cables . 300 Rmt 176.00 52,800.00

CAT6 Cable (DSR 1.53.1) Supply, installation, testing and commissioning of of Shielded twisted pair

12 CAT6 Cable (STP) complete etc as required 4 pair. 100 Rmt 57.00 5,700.00

Audio Cable Supply, installation, testing and commissioning of of 35' 15–pin HD &

13 3.6mm Stereo Audio Cable 1 Set 12,282.00 12,282.00

Audio Cable Supply, installation, testing and commissioning of of 12' 15–pin HD &

14 3.5mm Stereo Audio Cable 1 Set 25,500.00 25,500.00

Connectors Supply, installation, testing and commissioning of of Various Connectors

15 For Above Mentioned Configuration etc. all complete. 1 Lot 20,000.00 20,000.00

HDMI Cable SITC of Premium High Speed Gold plated HDMI Cable 15 ft HDMI Cable,

Up to 4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color

depth, max. 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and

also to comply the detailed technical specifications as attached

USB Extender SITC of USB cables Extendre 10 meters etc all compelte

Rack Supply, installation, Testing and Commisioing of 12 U Rack

37 Digitally signed by SANJAY

SCHEDULE OF QUANTITIES-ART WORKS

S NO MR DESCRIPTION UNIT QUANTITY RATE

DSR (INR) NON DSR (INR)

Hand painting directly on wall creating design and creation of Art work concept on given subject.

With initial visit to site, preparation of various designs with different material, providing the

samples, layout for approval, improvisation in short listed creative’s and making of final layout for

final production by enlargement of drawing as per ratio of actual size, to prepare detailed

working shop drawings (full scale) based on the Concept drawings .

Mixed media mural Wood/metal/fiberglass/terracotta /tiles or anything other medium artist find

suitable as long as it is permanent in nature.

Metal Sculpture permanent in nature

Concept Creation

Creating design and creation of Art work concept on given subject. With initial visit to site,

preparation of various designs with different material, providing the samples, layout for approval,

improvisation in short listed creative’s and making of final layout for final production by

enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings

(full scale) based on the Concept drawings/ Views/ site conditions, display of actual size dummy/

mock up Fabricated in sun board with digital print for client approval

3 MR Artwork Execution cum 8 131995.00 1055960.00

Execution of approved design in SS 316 grade steel /SS 304 grade SS (1.5mm-2mm thick)/

STONE/ ALLUMINUM/ MIXED MEDIA METAL pu colored (IF REQUIRED) antique as per

approved finish and protected against discoloration by sealing it with top coat of MRF/ Akzo

nobel clear Pu. Proper support system will be given as per approved shop drawing, to withstand

high wind pressure. The sculpture will be free from any Undulation /Dent unless it is part of the

design. The cost is inclusive of transport/packing and installation of the same at site.

Fastener/screws Hilti or equivalent company.

Providing and fixing theme artwork/ any other as per direction and site requirement from the

local artisans as per the selection of the client and the architect.

Panels of various sizes

Providing and fixing CANVAS paiting of different sizes as per the selection and approval of client

TOTAL ART WORKS

38 Digitally signed by SANJAY

SCHEDULE OF QUANTITIES-Furniture WORKS

S.no Item Qty Rate Amount

1 Supplying and placing in position of Single Seater Sofa as per image/ drawing. The 8 58856.25 470850

contemporary designed sofa of Size 102.5cm W X (D)90.5cm D X 85.0cm H, Seating Height

49.5cm, seat depth 52.0cm, arm height 61.0cm, inner seating width 48.0cm and back height

39.5cm, should be upholstered in premium leatherette. Premium leatherette upholstery that is

stretched out by hand onto the foam for a sumptuous seat. Breathable premium leatherette non-

toxic upholstery material to be used to keeps cooler for longer, anti-peel and makes easy to

clean. The back and seat have medium to firm cushioning for better posture. Seat of Sofa is

layered with silicon fibre filling over high density foam. The seat cushion is made of multi

layered foam of density 32(+/-2kg /m3). The seating cushions have 2.75 & 1.75 inches of elastic

webbing. Sofa seat and back plush cushioning and padded arms. Under structure frame shall

be constructed with kiln-dried beech wood framing for highly durable. Sofa having high ground

clearance/ designed to easy to clean the surface area. The thread used is nylon bonded to

provide lasting stitch strength, decorative stitch details compliment the design. Solid wood

tapered legs make the sofa airy and light. The material shall be provided strictly as per

approved drawings and directions of the Engineer-in- Charge.

Supplying and placing in position of Two Seater Sofa as per image/ drawing. The contemporary

designed sofa of Size 160.5cm W X (D)90.5cm D X 85.0cm H, Seating Height 49.5cm, seat

depth 52.0cm, arm height 61.0cm, inner seating width 104.0cm and back height 39.5cm, should

be upholstered in premium leatherette. Premium leatherette upholstery that is stretched out by

hand onto the foam for a sumptuous seat. Breathable premium leatherette non-toxic upholstery

material to be used to keeps cooler for longer, anti-peel and makes easy to clean. The back and

seat have medium to firm cushioning for better posture. Seat of Sofa is layered with silicon fibre

filling over high density foam. The seat cushion is made of multi layered foam of density 32(+/-

2kg /m3). The seating cushions have 2.75 & 1.75 inches of elastic webbing. Sofa seat and back

plush cushioning and padded arms. Under structure frame shall be constructed with kiln-dried

beech wood framing for highly durable. Sofa having high ground clearance/ designed to easy to

clean the surface area. The thread used is nylon bonded to provide lasting stitch strength,

decorative stitch details compliment the design. Solid wood tapered legs make the sofa airy and

light. The material shall be provided strictly as per approved drawings and directions of the

Engineer-in- Charge.

1b Supplying and placing in position of customise Coffee Table as per image/ drawing. Coffee 2 27896.25 55792.5

table size 120.0cm L x 70.0cm D x 40.0cm H, open shelf for ample space of storage size

101.0cm L x 50.0cm D table top shall be made with 34mm thick solid Steam Beech Wood

including exotic Oak veneer warped showing with herringbone patterns. Below shelf made with

solid Steam Beech Wood for storage offers generous space for books or magazines. Under

structure of the table which includes Legs, top, wooden frame & bottom tie members are made

out of first quality solid steam beech wood makes it highly durable. Steam beech wood brought

from FSC approved oem without knots & defects on all faces. The legs shall be tampered with

load beading capacity shall be 25 Kgs. Knock-down assembly with high quality standard

hardware like screws, metal inserts, wooden dowel, plastic leg bush. Kiln-dried wood and

extreme weather tested for high endurance. The treatment of anti-warp capability, PU matte

dark oak high-quality polishing with low chemical emission ensures healthy indoor air for your

family and termite/borer resistance helps you keep the product newer for longer. 10mm high

buffers required for ground clearance for easy cleaning. The material shall be provided strictly

as per approved drawings and directions of the Engineer-in- Charge.

1c Supplying and placing in position of customise Side Table as per image/ drawing. Side table 6 15963.75 95782.5

size 60.0cm L x 60.0cm D x 47.0cm H, table top shall be made with 34mm thick solid Steam

Beech Wood including exotic Oak veneer warped showing with herringbone patterns. Under

structure of the table which includes Legs, top, wooden frame & bottom tie members are made

out of first quality solid steam beech wood makes it highly durable. Steam beech wood brought

from FSC approved oem without knots & defects on all faces. The legs shall be tampered with

load beading capacity shall be 25 Kgs. Knock-down assembly with high quality standard

hardware like screws, metal inserts, wooden dowel, plastic leg bush. Kiln-dried wood and

extreme weather tested for high endurance. The treatment of anti-warp capability, PU matte

dark oak high-quality polishing with low chemical emission ensures healthy indoor air for your

family and termite/borer resistance helps you keep the product newer for longer. 10mm high

buffers required for ground clearance for easy cleaning. The material shall be provided strictly

as per approved drawings and directions of the Engineer-in- Charge.

Digitally signed by SANJAY

2 Supplying and placing in position of Two Seater Sofa as per image/ drawing. The contemporary 4 137223.75 548895

designed sofa of Size : 180.0cm L x 94.0cm D x 86.0cm H, seat height 44.0cm, seat depth

53.0cm, arm height 60.0cm, inner seating width 120.0cm and back height 49.0cm, should be

upholstered with premium leather. Premium leather upholstery that is stretched out by hand

onto the foam for a sumptuous seat. Breathable premium leather upholstery material to be used

to keeps cooler for longer, anti-peel and easy to clean. The back and seat have medium to firm

cushioning for better posture. Seat of Sofa is layered with silicon fibre filling over high density

foam. The seat cushion is made of multi layered foam of density 32(+/-2kg /m3). The seating

cushions have 2.75 & 1.75 inches of elastic webbing. Sofa seat and back plush cushioning and

padded arms. Under structure frame shall be constructed with kiln-dried beech wood framing is

highly durable. The thread used is nylon bonded to provide lasting decorative stitch strength.

The material shall be provided strictly as per approved drawings and directions of the Engineer-

2a Supplying and placing in position of customised Coffee Table as per image/ drawing. Coffee 2 27090 54180

table size 120.0cm L x 60.0cm D x 45.5cm H, table top shall be made with 18mm thick solid

Steam Beech Wood including veneer warped in zig zag design. Below shelf made with solid

Steam Beech Wood for storage offers generous space for books or magazines. Under structure

of the table which includes Legs, top, wooden frame & bottom tie members are made out of first

quality solid steam beech wood makes it highly durable. Steam beech wood brought from FSC

approved oem without knots & defects on all faces. The legs shall be tampered with load

beading capacity shall be 25 Kgs. Knock-down assembly with high quality standard hardware

like screws, metal inserts, wooden dowel, plastic leg bush. Kiln-dried wood and extreme

weather tested for high endurance. The treatment of anti-warp capability, PU polishing and

termite/borer resistance helps you keep the product newer for longer. 10mm high buffers

required for ground clearance for easy cleaning. The material shall be provided strictly as per

approved drawings and directions of the Engineer-in- Charge.

2b Supplying and placing in position of customised Side Table as per image/ drawing. Side table 2 14996.25 29992.5

size 60.0cm L x 40.0cm D x 50.0cm H, table top shall be made with 18mm thick solid Steam

Beech Wood including veneer warped in zig zag design. Below shelf made with solid Steam

Beech Wood for storage offers generous space for books or magazines. Under structure of the

table which includes Legs, top, wooden frame & bottom tie members are made out of first

quality solid steam beech wood makes it highly durable. Steam beech wood brought from FSC

approved oem without knots & defects on all faces. The legs shall be tampered with load

beading capacity shall be 25 Kgs. Knock-down assembly with high quality standard hardware

like screws, metal inserts, wooden dowel, plastic leg bush. Kiln-dried wood and extreme

weather tested for high endurance. The treatment of anti-warp capability, PU polishing and

termite/borer resistance helps you keep the product newer for longer. 10mm high buffers

required for ground clearance for easy cleaning. The material shall be provided strictly as per

approved drawings and directions of the Engineer-in- Charge.

3 Supplying and placing in position of Four Seater Dinning Table as per image/ drawing. Table 4 34668.75 138675

having size 143.0cm L x 89.0cm D x 75.5cm H, table top shall be made with 54mm thick solid

Steam Beech Wood including exotic oak veneer warped showing with checkered handcrafted

patterns. Under structure of the table which includes Legs, top, wooden frame & bottom tie

members are made out of first quality solid steam beech wood makes it highly durable. Steam

beech wood brought from FSC approved oem without knots & defects on all faces. The legs

shall be tampered with load beading capacity shall be 25 Kgs. Knock-down assembly with high

quality standard hardware like screws, metal inserts, wooden dowel, plastic leg bush. Kiln-dried

wood and extreme weather tested for high endurance. The treatment of anti-warp capability, PU

matte dark oak high-quality polishing with low chemical emission ensures healthy indoor air for

your family and termite/borer resistance helps you keep the product newer for longer. Provision

for levellers required for stability on uneven surfaces. The material shall be provided strictly as

per approved drawings and directions of the Engineer-in- Charge.

3a Supplying and placing in position of Cafe Chair as per image/ drawing. Chair size : W 57.0cm x 16 20640 330240

D 51.0cm x H 77.5cm., Back height 35.0cm and seating depth 54.0cm, Seat and back should be

made up of 1.2 ±0.1cm. thick hot-pressed plywood. Back and seat in one piece in contouring

barrel back shape with slender arms. Chair seat and back having breathable, non- sticky

premium leatherette upholstery in grey colour, anti-peel quality upholstery covers on moulded

polyurethane foam. The back foam should be designed with contoured lumbar support for extra

comfort. Under structure of the chair which includes Legs, wooden frame & seat skirting/

members are made out of first quality solid rubber wood makes it highly durable. Rubberwood

should be brought from FSC approved oem without knots & defects on all faces. The chair

stands on wooden four legs beautiful accents legs are slightly slant for better look. Kiln-dried

wood and extreme weather tested for high endurance. The treatment of anti-warp capability, PU

polishing in natural brown finish and termite/borer resistance helps you keep the product newer

for longer. Buffers should be provided ground clearance for easy cleaning or reducing of noise.

The material shall be provided strictly as per approved drawings and directions of the Engineer-

Digitally signed by SANJAY

4 Supplying and placing in position of Coffee Table as per image/ drawing. Overall size 76.0cm 8 30960 247680

W x 76.0cm D x 49.0cm H. Table top having striking black toughened glass minimum 5mm thick

fitted in glossy gold metal surface & bottom one piece round shaped glass should be sized

perfectly for seating space between two chairs. Bottom glass shall be made with high quality

clear coloured toughened glass. Table shall be made with combination of coloured glass and

glossy gold in metal finished. The material shall be provided strictly as per approved drawings

and directions of the Engineer-in- Charge.

4a Supplying and placing in position of Cafe Chair as per image/ drawing. Chair size : W 55.0cm x 28 11126.25 311535

D 66.0cm x H 101.0cm., Back height 53.0cm and seating depth 42.5cm, Seat and back should

be made up of hot-pressed plywood. Chair seat and back having Breathable fabric upholstery

covers on moulded polyurethane foam. The back foam should be designed with contoured

lumbar support for extra comfort. Under structure of the chair which includes Legs, wooden

frame/ members are made out of first quality solid steam beech wood makes it highly durable.

Steam beech wood should be brought from FSC approved oem without knots & defects on all

faces. The chair stands on wooden four legs beautiful accents legs are slightly slant for better

look. Kiln-dried wood and extreme weather tested for high endurance. The treatment of anti-

warp capability, PU polishing in dark Walnut finish and termite/borer resistance helps you keep

the product newer for longer. Buffers should be provided ground clearance for easy cleaning or

reducing of noise. The material shall be provided strictly as per approved drawings and

directions of the Engineer-in- Charge.

5a Supplying and placing in position of customised Coffee Table as per image/ drawing. Sofa size: 4 36765 147060

80.0cm L x 71.0cm D x 77.0cm H. Seating Height 42.5cm, sofa seat and back shall be made of

kiln-dried beech wood, a layer of silicon filling over the high-density foam with minimum of 32

densities and upholstered with buttery-soft premium leatherette in front and back. Premium

leatherette upholstery should be made with non-toxic material to make anti-peeling, low VOC

and easy to clean. The under structure frame modernist classic design made with kiln-dried

german beech wood frame and legs give a sturdy presence to the sofa. Wooden frame gaps

should be covered using with 12mm thick plywood IS:303 grade with combination of commercial

(common) and moisture proof plywood (tentative). Complete structure shall be covered by PU

foam fixed with adhesive glue, the frame shall be padded with high resilience polyurethane

foam shall be stack foam of 50mm thick seat, 40mm thick back foam having 20 +/- 5 density

foam used. The thread used is nylon bonded to provide lasting stitch strength. The material

shall be provided strictly as per approved drawings and directions of the Engineer-in- Charge.

5b Supplying and placing in position of customised Coffee Table as per image/ drawing. Sofa size: 2 55792.5 111585

153.0cm L x 71.0cm D x 77.0cm H. Seating Height 42.5cm, sofa seat and back shall be made

of kiln-dried beech wood, a layer of silicon filling over the high-density foam with minimum of 32

densities and upholstered with buttery-soft premium leatherette in front and back. Premium

leatherette upholstery should be made with non-toxic material to make anti-peeling, low VOC

and easy to clean. The under structure frame modernist classic design made with kiln-dried

german beech wood frame and legs give a sturdy presence to the sofa. Wooden frame gaps

should be covered using with 12mm thick plywood IS:303 grade with combination of commercial

(common) and moisture proof plywood (tentative). Complete structure shall be covered by PU

foam fixed with adhesive glue, the frame shall be padded with high resilience polyurethane

foam shall be stack foam of 50mm thick seat, 40mm thick back foam having 20 +/- 5 density

foam used. The thread used is nylon bonded to provide lasting stitch strength. The material

shall be provided strictly as per approved drawings and directions of the Engineer-in- Charge.

5c Supplying and placing in position of customised Coffee Table as per image/ drawing. Coffee 2 24671.25 49342.5

table size 120.0cm L x 60.0cm D x 46.0cm H, Provision for one open shelf distance from table

top is 26.0cm, table top shall be made with 36mm thick solid Steam Beech Wood including

veneer warped in Checked design. Below shelf made with solid Steam Beech solid wood

louvers covers from three sides, storage offers generous space for books or magazines. Under

structure of the table which includes Legs, top, wooden frame & bottom tie members are made

out of first quality solid steam beech wood makes it highly durable. Steam beech wood brought

from FSC approved oem without knots & defects on all faces. The legs shall be tampered with

load beading capacity shall be 25 Kgs. Knock-down assembly with high quality standard

hardware like screws, metal inserts, wooden dowel, plastic leg bush. Kiln-dried wood and

extreme weather tested for high endurance. The treatment of anti-warp capability, PU polishing

and termite/borer resistance helps you keep the product newer for longer. 10mm high buffers

required for ground clearance for easy cleaning. The material shall be provided strictly as per

approved drawings and directions of the Engineer-in- Charge.

Digitally signed by SANJAY

5d Supplying and placing in position of customised Side Table as per image/ drawing. Side table 4 17253.75 69015

size 650.0cm L x 50.0cm D x 46.0cm H, Provision for one open shelf distance from table top is

26.0cm, table top shall be made with 36mm thick solid Steam Beech Wood including veneer

warped in Checked design. Below shelf made with solid Steam Beech solid wood louvers

covers from three sides, storage offers generous space for books or magazines. Under structure

of the table which includes Legs, top, wooden frame & bottom tie members are made out of first

quality solid steam beech wood makes it highly durable. Steam beech wood brought from FSC

approved oem without knots & defects on all faces. The legs shall be tampered with load

beading capacity shall be 25 Kgs. Knock-down assembly with high quality standard hardware

like screws, metal inserts, wooden dowel, plastic leg bush. Kiln-dried wood and extreme

weather tested for high endurance. The treatment of anti-warp capability, PU polishing and

termite/borer resistance helps you keep the product newer for longer. 10mm high buffers

required for ground clearance for easy cleaning. The material shall be provided strictly as per

approved drawings and directions of the Engineer-in- Charge.

5e Supplying and placing in position of Four Seater Dinning Table as per image/ drawing. Table 10 34668.75 346687.5

having size 143.0cm L x 89.0cm D x 75.5cm H, table top shall be made with 54mm thick solid

Steam Beech Wood including exotic oak veneer warped showing with checkered handcrafted

patterns. Under structure of the table which includes Legs, top, wooden frame & bottom tie

members are made out of first quality solid steam beech wood makes it highly durable. Steam

beech wood brought from FSC approved oem without knots & defects on all faces. The legs

shall be tampered with load beading capacity shall be 25 Kgs. Knock-down assembly with high

quality standard hardware like screws, metal inserts, wooden dowel, plastic leg bush. Kiln-dried

wood and extreme weather tested for high endurance. The treatment of anti-warp capability, PU

matte dark oak high-quality polishing with low chemical emission ensures healthy indoor air for

your family and termite/borer resistance helps you keep the product newer for longer. Provision

for levellers required for stability on uneven surfaces. The material shall be provided strictly as

per approved drawings and directions of the Engineer-in- Charge.

5f Supplying and placing in position of Cafe Chair as per image/ drawing. Chair size : W 57.0cm x 40 20640 825600

D 51.0cm x H 77.5cm., Back height 35.0cm and seating depth 54.0cm, Seat and back should be

made up of 1.2 ±0.1cm. thick hot-pressed plywood. Back and seat in one piece in contouring

barrel back shape with slender arms. Chair seat and back having breathable, non- sticky

premium leatherette upholstery in grey colour, anti-peel quality upholstery covers on moulded

polyurethane foam. The back foam should be designed with contoured lumbar support for extra

comfort. Under structure of the chair which includes Legs, wooden frame & seat skirting/

members are made out of first quality solid rubber wood makes it highly durable. Rubberwood

should be brought from FSC approved oem without knots & defects on all faces. The chair

stands on wooden four legs beautiful accents legs are slightly slant for better look. Kiln-dried

wood and extreme weather tested for high endurance. The treatment of anti-warp capability, PU

polishing in natural brown finish and termite/borer resistance helps you keep the product newer

for longer. Buffers should be provided ground clearance for easy cleaning or reducing of noise.

The material shall be provided strictly as per approved drawings and directions of the Engineer-

6 Supplying and placing in position of Bar Chair as per image/ drawing. Chair size : W 51.0cm x D 5 15318.75 76593.75

59.0cm x H 84.0cm, Back height 38.0cm and seating depth 45.0cm, Seat and back should be

made up of hot-pressed plywood. Back and seat in one piece in contouring barrel back shape

with low height slender arms. Chair seat and back premium grey fabric front side and blue

leatherette add a striking contrast upholstery covers on moulded polyurethane foam. The wing

back foam should be designed with contoured lumbar support for extra comfort. Under structure

of the chair which includes Legs, wooden frame/ members are made out of first quality solid

steam beech wood makes it highly durable. Steam beech wood should be brought from FSC

approved oem without knots & defects on all faces. The chair stands on wooden four legs

beautiful accents legs are slightly slant for better look. Kiln-dried wood and extreme weather

tested for high endurance. The treatment of anti-warp capability, PU polishing in dark Walnut

finish and termite/borer resistance helps you keep the product newer for longer. Buffers should

be provided ground clearance for easy cleaning or reducing of noise. The material shall be

provided strictly as per approved drawings and directions of the Engineer-in- Charge.

6a Supplying and placing in position of Coffee Table as per image/ drawing. Overall size 76.0cm 7 30960 216720

W x 76.0cm D x 49.0cm H. Table top having striking black toughened glass minimum 5mm thick

fitted in glossy gold metal surface & bottom one piece round shaped glass should be sized

perfectly for seating space between two chairs. Bottom glass shall be made with high quality

clear coloured toughened glass. Table shall be made with combination of coloured glass and

glossy gold in metal finished. The material shall be provided strictly as per approved drawings

and directions of the Engineer-in- Charge.

Digitally signed by SANJAY

6b Supplying and placing in position of Cafe Chair as per image/ drawing. Chair size : W 55.0cm x 32 11126.25 356040

D 66.0cm x H 101.0cm., Back height 53.0cm and seating depth 42.5cm, Seat and back should

be made up of hot-pressed plywood. Chair seat and back having Breathable fabric upholstery

covers on moulded polyurethane foam. The back foam should be designed with contoured

lumbar support for extra comfort. Under structure of the chair which includes Legs, wooden

frame/ members are made out of first quality solid steam beech wood makes it highly durable.

Steam beech wood should be brought from FSC approved oem without knots & defects on all

faces. The chair stands on wooden four legs beautiful accents legs are slightly slant for better

look. Kiln-dried wood and extreme weather tested for high endurance. The treatment of anti-

warp capability, PU polishing in dark Walnut finish and termite/borer resistance helps you keep

the product newer for longer. Buffers should be provided ground clearance for easy cleaning or

reducing of noise. The material shall be provided strictly as per approved drawings and

directions of the Engineer-in- Charge.

7 Supplying and placing in position of customised Side Table as per image/ drawing. Side table 1 34668.75 34668.75

size 650.0cm L x 50.0cm D x 46.0cm H, Provision for one open shelf distance from table top is

26.0cm, table top shall be made with 36mm thick solid Steam Beech Wood including veneer

warped in Checked design. Below shelf made with solid Steam Beech solid wood louvers

covers from three sides, storage offers generous space for books or magazines. Under structure

of the table which includes Legs, top, wooden frame & bottom tie members are made out of first

quality solid steam beech wood makes it highly durable. Steam beech wood brought from FSC

approved oem without knots & defects on all faces. The legs shall be tampered with load

beading capacity shall be 25 Kgs. Knock-down assembly with high quality standard hardware

like screws, metal inserts, wooden dowel, plastic leg bush. Kiln-dried wood and extreme

weather tested for high endurance. The treatment of anti-warp capability, PU polishing and

termite/borer resistance helps you keep the product newer for longer. 10mm high buffers

required for ground clearance for easy cleaning. The material shall be provided strictly as per

approved drawings and directions of the Engineer-in- Charge.

7a Supplying and placing in position of Coffee Table as per image/ drawing. Overall size 76.0cm 2 30960 61920

W x 76.0cm D x 49.0cm H. Table top having striking black toughened glass minimum 5mm thick

fitted in glossy gold metal surface & bottom one piece round shaped glass should be sized

perfectly for seating space between two chairs. Bottom glass shall be made with high quality

clear coloured toughened glass. Table shall be made with combination of coloured glass and

glossy gold in metal finished. The material shall be provided strictly as per approved drawings

and directions of the Engineer-in- Charge.

7b Supplying and placing in position of Cafe Chair as per image/ drawing. Chair size : W 55.0cm x 4 11126.25 44505

D 66.0cm x H 101.0cm., Back height 53.0cm and seating depth 42.5cm, Seat and back should

be made up of hot-pressed plywood. Chair seat and back having Breathable fabric upholstery

covers on moulded polyurethane foam. The back foam should be designed with contoured

lumbar support for extra comfort. Under structure of the chair which includes Legs, wooden

frame/ members are made out of first quality solid steam beech wood makes it highly durable.

Steam beech wood should be brought from FSC approved oem without knots & defects on all

faces. The chair stands on wooden four legs beautiful accents legs are slightly slant for better

look. Kiln-dried wood and extreme weather tested for high endurance. The treatment of anti-

warp capability, PU polishing in dark Walnut finish and termite/borer resistance helps you keep

the product newer for longer. Buffers should be provided ground clearance for easy cleaning or

reducing of noise. The material shall be provided strictly as per approved drawings and

directions of the Engineer-in- Charge.

Providing and Fixing Treadmill Strong, 2.0 HP AC Duty Continuous 4.0 HP Peak Treadmill 2 163242.5 326485

Suitable for for Semi-Commercial Environment. Mp3 and USB and Double Deck Cushioning

which is Highly Recommended for your Joints and Comfort Level. Cosco AC 700 Treadmill :

Speed Range 1.0~18 Kph. Net Weight 85 Kgs. Running Belt 20 x 55″(510x1400mm) Max. User

Weight 140 Kgs.Incline

Motor Incline 0~15%, Foldable, Emergency Stop,Mp3, USB and Fan ,2070 x 880 x 1335mm

with 5 LED Readout,Motor 2.0 HP AC Duty Continuous (4.0 HP Peak),1 Year Warranty

9 Personal Trainer

Providing and Fixing Personal Trainer – Body-Solid, Superior engineering and construction 1 382927 382927

backed by the Body-Solid guarantee to last a lifetime.May add attachments to both sides of

gym.Left side facing gym – 1/2:1 ratio,Right side facing gym – 2:1 ratio as per the approval of

engineer in charge

Digitally signed by SANJAY

Providing and Fixing Cycle is a great workout partner for your workouts. Designed keeping in 2 68103 136206

mind user safety, it comes with with a Magnetic Belt Drive System to ensure smooth rides. Net

Weight 88 Kgs.Max. User Weight 160 Kgs.Flywheel Balanced 24 Kgs.Other Features High

grade pedal, adjustable seat forwards & back, upward & downward, Rubber coated handle bar

Assembly (LxWxH) 1250 x 600 x1150mm Functions Belt Drive System Displays Time,

Distance, Heart Rate.

11 Billiard Table

Providing and Fixing Pool Table wide, solid wood rails; leather shield pockets; and pearlized 1 575000 575000

diamond-shaped rail sights. Baseframe, aprons, and tapered legs are built for durability with a

matte black veneer. Table size: 8 ft. Finish Available: Matte Black Leg Option: Standard (as

shown) Rail Sights: Diamond-Shaped White Pearlized Pockets: Shield Drop Pockets BASE

FRAME CONSTRUCTION Exterior Style Made from superior engineered wood material with

selected veneered hardwoods Assembled using high-torque bolted construction providing a

strong and sturdy base as pe the approval of engineer in charge

12 Table Tennis Table

Providing and Fixing Table Tennis Table with Board Thickness 18 mm 1 86996.35 86996.35

Board Colour Paint: Dupont Polyurethane Anti Glare Frame 20 x 60 mm Weight 161 kg (Net)

Folded Size 2740 x 1525 x 760 mm.

13 Soccer Table

Providing and Fixing Soccer Table (2.5×5) Wooden soccer,Antique soccer Size 2.5 ft x 5 ft 1 88780 88780

Made by solid wood, Designer legs soccer table,Solid wood legs,Tuffen glass top,16 mm rods,

Height 34″,Weight 100 kgs, Heavy duty

14 Cards Table with chairs

Providing and Fixing Card Table with chairs .The set includes a game table and four chairs with 4 287500 1150000

plush, fully padded seats and backs and equipped with height adjustment mechanisms. The

table features a pedestal base and game top. The dark mahogany finish compliments any color

palette. Game Table Features:

Reversible game and dining table

Built in storage space

Includes 4 game chairs with casters, swivel, and adjustable options

Mahogany solids and veneers

Tobacco Leaf finish

Rough sawn distressing

Planked old world design

Game top has padded black felt insert

Chair Features:

Includes 4 chairs as pictured

Swivel Caster Base

Faux Leather upholstery

They stand out through their comfortably cushioned seat as well as the casters. .

Chair Dimensions: Width 24 X Depth 23 X Height 38

Game Table Dimensions: 53"W x 53"D x 30"H 137 LB Chair Dimensions: 24”x 23”x 38”H 53

Grand Total 7453926.85

Grand Total 7453926.85

Digitally signed by SANJAY

Schedule of Quantities: Signages

S No Description Unit Qty Unit price Non-DSR Amount

1 RECEPTION 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches of

required size and shape with arrangement of screws in the letters itself for

mounting on the walls or pasting. Fixing complete as per directions of the

engineer. The Sizes would be calculated in Sqft as per Logo Design provided. Each 4 35,977.00 143908.00

Tentative Size 42"X60"

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood

finish pasted /White milky acrylic 3mm laser cut pasted on top with proper

names/ Departments written using plottercut vinyl or laser cut acrylic letters in

approved colour.Inserting provision for changing names .Fixing provision using Each 10 1,967.00 19670.00

double sided tape as required.

Signage Size 12x5 inch

3 DEPARTMENTAL SIGNAGE (All Floors)

Providing and fixing of Acrylic signage made of 5mm Acrylic with textured wood

finish pasted /White milky acrylic 3mm laser cut pasted on top with proper

names /Departments written using plottercut vinyl or laser cut acrylic letters in Each 10 1,439.00 14390.00

approved colour. Fixing provision using VHP double sided tape as required.

Signage Size 12x5 inch

4 FLOOR DIRECTORY

Providing and fixing of Acrylic signageboard of 5mm Acrylic with textured wood

finish pasted /White milky acrylic 3mm laser cut pasted on top with proper

names /Departments written using plottercut vinyl or laser cut acrylic letters in

approved colour. Provision of fixing screws/ Studs etc or as per the direction of Each 2 20,147.00 40294.00

5 TOILET ICONS

Providing and fixing of Acrylic signage made of 5mm Acrylic with textured wood

finish pasted /White milky acrylic 3mm laser cut pasted on top with proper icons

using plottercut vinyl or laser cut acrylic letter in approved colour. Fixing Each 5 1,165.00 5825.00

provision using double sided tape as required.

Signage Size :8 "x 8" inch

45 Digitally signed by SANJAY

6 FIRE EVACUATION MAP / SIGN.

Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm acrylic with

Evacuation Plan Printed on photoluminescent media and inserted between the

two frames. Should be fixed on the wall using 4 Screw/ SS studs. Size 12 inch x Each 4 2,673.00 10692.00

7 FIRE ESCAPE EDGE-LIT SIGNAGE

Providing and fixing of Edge-Lit signage with battery backup. Made from acrylic

sheet of 8 mm thickness laser engraved, Transformer to be inbuilt. Maintenance

- free sealed nickel cadmium battery included • 120V/277V AC Operation •

Crystal clear acrylic face panel• Engraved letters increase visibility • Anodized Each 4 3,289.00 13156.00

aluminum faceplate • Field applied chevron directional indicators simplify

installation • Long life, energy-saving LED lamps • Dual-voltage 120V/277V AC

Operation • UL listed. To be installed at stairs entry. Size 310mm x 175mm

8 FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun board sheet

at base with photoluminescent film self adhesive & colored vinyl ( Red/Green)

Plotter cut and pasted on top. Both side / Single Side facing Complete including

fixing on wall with screws and washers or hanging on ceiling with GI chain/GI

Bar complete as per technical specifications and directions of Engineer.

a Photoluminescent, Fire Hose Reel - 10"x8" Each 6 535.00 3210.00

b Photoluminescent, Fire Exit / Escape Sign - 18"x6" Each 6 617.00 3702.00

c Photoluminescent, Floor Level - 18"x6" Each 6 617.00 3702.00

d Photoluminescent, Fire Alarm Call Point - 10"x8" Each 6 535.00 3210.00

e Photoluminescent, Fire do not use lift- 10"x8" Each 6 535.00 3210.00

f Photoluminescent Signs, Fire Extinguishers - 10"x8" Each 6 535.00 3210.00

Metal LED Signage

Stainless steel of 304 grade 3D laser cut letters, of thickness 22 gauge side &

20 gauge on back, neatly fabricated joints, properly welded and grinded with all

corners rubbed and polished with the arrangement of screws in the letter itself

for mounting Acrylic (Astari/Acralite) laser cut letters on front by capping type Set 1.00 184728.00 184728.00

with LED (Samsung IP 68) inside for individual letters illumination with vinyl (3M/

LG) of color as per design approved.

Size: 36 inch letter height

46 Digitally signed by SANJAY

Stainless steel of 304 grade automotive grade paint, as per logo 3D laser cut

letters, of thickness 22 gauge side & 20 gauge on front, neatly fabricated joints,

properly welded and grinded with all corners rubbed and polished with the Set 1.00 308957.00 308957.00

arrangement of screws in the letter itself for mounting color as per design

Standing provision to be provided by "STPI"

Size: 36 inch letter height

TOTAL 761864.00

47 Digitally signed by SANJAY

SCHEDULE OF QUANTITIES: HORTICULTURE

S NO DESCRIPTION Total Qty Unit Rate AMOUNT

Supply and Planting Draco plant having 6ft height

complete with Designer as per choice of engineer

1 incharge, pot tray, mud, manure, stones, loading and 10 Each 18486.00 184860.00

unloading and complete with all respect

Supply and Planting Monstera plant having 3-4 ft

height complete. Designer as per choice of engineer

2 incharge, pot tray, mud, manure, stones and loading 25 Each 5546.00 138650.00

and unloading complete with all respect

Supply and Planting Lolina plant having 2-3 ft height

with Coco-peat, mud and manure complete in all

3 respect as per direction of engineer in charge 25 Each 1849.00 46225.00

loading and unloading complete with all respect

Supply and Planting Seaforthia Palm having ht.

90cm to 1.20 m with 6-8 suckers, well developed,

fresh and healthy lush green leaves from bottom to

4 top Coco-peat, mud and manure complete in all 25 Each 1849.00 46225.00

respect including loading and unloading as per

direction of engineer in charge.

Supply and Planting Rhapis Palm having ht. 90cm to

1.20 m with 15 to 18 equal suckers, well developed,

full of fresh and healthy leaves from bottom to top

5 complete Coco-peat, mud and manure complete 25 Each 1849.00 46225.00

including loading and unloading in all respect as per

direction of engineer in charge.

Supply of full soil fill conical shaped planters of

specified volume and dimensions in stone finish or

equivalent. planters to be indigenously made by

rotational moulding, with homogeneous recyclable,

industrial grade polymer-resin mix, and textured

surface. planters should have an integrated water

outlet hole & plug, single layered peel-proof

6 construction, light weight, rust proof, uv stabilized,

anti-frost feature without any joints, and easy to

clean. planter supplier must give 1 year warranty

against any fading or cracking for both indoor and

outdoor use. green plant and laying is extra. potting

instructions as per company catalogue.

Supply of double layered translucent backlit

cylinderical shaped - hand carfted pattern planters

of volume 18 ltr; approx. dimension 24(h)x18(d) in

granite/ stone/ solid finish or equivalent. planters to

be indigenously made by rotational moulding, with

homogeneous 100% recyclable, industrial grade

polymer-resin mix, with textured surface and stone

match finishes. planters to have concealed shock

7 resistant back lighting system with secured supply 10 Each 13799.00 137990.00

wire and an integrated water outlet hole & plug, peel

proof construction, asbestos free, light in weight,

without any joints, rust proof, uv stabilized, anti-frost

feature and easy to clean. planter supplier must give

1 year warranty against any led, fading or cracking

for indoor and outdoor use.

Supply of double layered translucent backlit

cylinderical shaped - hand carfted pattern planters

of volume 40 ltr; approx. dimension 40(h)x18.5(d) in

granite/ stone/ solid finish or equivalent. planters to

be indigenously made by rotational moulding, with

homogeneous 100% recyclable, industrial grade

polymer-resin mix, with textured surface and stone

match finishes. planters to have concealed shock

8 resistant back lighting system with secured supply 10 Each 21812.00 218120.00

wire and an integrated water outlet hole & plug, peel

proof construction, asbestos free, light in weight,

without any joints, rust proof, uv stabilized, anti-frost

feature and easy to clean. planter supplier must give

1 year warranty against any led, fading or cracking

for indoor and outdoor use.

9 Artificial Vertical Garden on wall 300 Sqm 4,827.00 1448100.00

Ms Frame (Hanging) with Artificial hanging creeper

Size : 3'-0"x6'-0" (Each)

Plantation: Supply and installaion of Natural Plant

with sand, fertilizer etc. complete in all respect with

designer pots, manure , mud, stone etc as decided

11.1 by engineer in charge. 200 LS 834.00 1,66,800.00

NET TOTAL 41,97,610.00 Digitally signed by SANJAY

Schedule of Quantities: Pantry Equipments

S No Description Unit Qty Unit price DSR Amount Non-DSR Amount

SITC and placing at position of 550 litre and above as per decision of engineer

in charge and requirement of client, Double Door SS Refrigerator including

stand with Smart Inverter Compressor with following features:

Smart Inverter Compressor

Smart Diagnosis™

Auto Smart Connect™

SITC of Convection Microwave commercial with Glass Door, 251 Auto Cook

Menu, 360° Motorised Rotisserie with following features:

251 Auto Cook Menu

Intellowave Technology

Cooking Completion Alarm

SITC of Induction Cooker with Extra Safe Automatic Off Function, 2100Watts,

Temperature Control, 6 Preset Menus with following features:

Temperature Control

Induction Cooker with High Power

3 Customized Programs for making Indian Dishes Each 2 3,499.00 6998.00

Extra Safe Automatic off Function

0 to 3 hours Time Setting

Cooking without Flame

Cool-to-Touch Surface, cooks Foods Safely

SITC of Chimney along with piping to desire position and complete in all

respect with Filterless Technology, Hand Auto Clean Technology, LED Lamps,

Motion Sensor, Oil Collector, Curved Glass (Black) with following features:

1200 m3/hr Suction

Filterless Filter

4 Heat Auto Clean Technology Each 2 14,140.00 28280.00

Maximum Suction Capacity

Touch Control Panel

Striking Design

SITC of Beverage Vending Machine (Multicolor) with following features:

Fully Automatic

Just press of a button

Cup Counter/Hot Water

Aesthetic Design

Micro Processor

SITC of Digital Air Fryer with Touch Panel, uses up to 90% less fat, Air Fry,

Roast, Bake, Grill, Reheat 7 Pre-set Menu, 1400W, with dishwasher safe 4.1

Liter basket, Patented Rapid Air Technology, Starfish design, 360 °even frying,

Supplying Electric Deep Fryer 6 + 6 Ltr Best for french fries deep fryiing.

MaterialStainless Steel,Coloursilver,Item Weight1950

Grams,Wattage2500 Watts,Oil Capacity 12.00

TOTAL 212155.00

49 Digitally signed by SANJAY

SCHEDULE OF QUANTITES: FOUNTAIN

S.no DSR/MR Description Qty Unit Rate DSR Amount NDSR Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding

30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated

1 2.6.1 earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. 52.67 cu m 205.45 10,821

2.6.1 All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not

2 2.25 exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and 27.87 cu m 253.95 7,078

lift upto 1.5 m.

Removal of excavated earth by Mechanical Transport including loading, unloading and stacking for all lead

Providing and laying in position cement concrete of specified grade excluding the cost of centering and

4 4.1.8 shuttering - All work up to plinth level: 1: 4: 8 (1 Cement: 4 coarse sand (zone-III): 8 graded stone aggregate 10.96 cu m 6,326.05 69,334

40mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and

5 4.1.3 shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) :4 graded stone aggregate 18.68 cu m 7,365.15 1,37,581

20 mm nominal size Column,Beam)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering,

6 5.1.2 shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone- 7.45 cu m 8,364.20 62,313

III): 3 graded stone aggregate 20 mm nominal size R.C.C Slab).

Centering and shuttering including strutting, propping etc. and removal of form work for: Walls (any thickness)

7 5.9.2 including attached pilasters, butteresses, plinth and string courses etc. 109.00 sq m 669.55 72,981

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all

8 5.22.6 complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 3271.00 Kg 89.65 2,93,245

Stone slate tile

Providing and fixing Glass mossaic tiles on finished plain wall surface ofsize 20 mm x 20 mm x 4 mm in all

colour, design , fixing in approveddesign. The glass mosaic tiles shall be fixed on the wall surface withthe help

10 11.53 of approved adhesive applied at the rate of 2.5 kg per sqm andgrouting of the same. All completed as per 172.63 sq m 3,282.50 5,66,667

direction of Engineer-incharge

12 mm cement plaster of mix :

11 13.4.1 1:4 (1 cement: 4 Coarse sand WALL) 219.00 sq m 307.25 67,288

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water

proofing cement compound consisting of applying:

(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound @ 0.253 kg/sqm.

(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth

should not be less than 10 cm.

(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing

12 22.6 cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 74.00 sq m 585.55 43,331

hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and

tucked into groove in parapet all around.

(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of

measurement the entire treated surface will be measured.

50 Digitally signed by SANJAY

Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade,

colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated

13 8.2.2.1 with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and 17.93 sq m 4,679.35 83,901

polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of

slab upto 0.50 sqm

SITC of 25 mm dia water diffuser nozzle (MOC: SS 304) complete as required for water fall effect No 8

SITC of SS Debris collection strainer 1000 x 1000 x 900 mm long to inhibit foreign material from entering the Set 1

14.2 MR sump complete as required 13,500.00 13,500.00

Supplying and fixing of overflow Skimmer made out of SS 304 Gr size 65 mm inlet fixed to water feature wall No 1

14.3 MR base with openable front by SS screws with fixing etc as required 9,500.00 9,500.00

14.4 MR SITC of 300 X 300 mm main drain in stainless steel 304 Gr complete as required. No 5 6,500.00 32,500.00

14.5 MR SITC of SS header for mounting of 25 mm dia diffuser nozzles complete as required No 1 12,500.00 12,500.00

SITC of 24V DC, 18 watts LED, WW color water proof light (MOC SS 304 Gr) Protection Index IP 68 for Nos 24

15.1 MR under water operation complete as required 7,650.00 1,83,600.00

15.2 MR SITC of LED light Stands for mounting of lights complete as required Nos 24 500.00 12,000.00

15.3 MR SITC of Waterproof joints. Nos 24 300.00 7,200.00

15.4 MR SITC of constant voltage LED driver input AC 220-250 volts,output DC. Nos 2 5,800.00 11,600.00

16 MR PUMPS -

SITC of Monoblock submersible Pump with delivering 22.7 LPS @ 8 mtrs suitable for operation on three No 1

16.1 MR phase AC Supply complete as required 36,500.00 36,500.00

17 ELECTRICAL CONTROL PANEL -

Supply of Cubical Control Panel feeder pillar type made of 16 gauge CRC sheet powder coated with MCB, No 1

17.1 MR volt-meter, Amp meter, TP MCB's, Protection circuits etc and space for CVD for the lights including timer for 82,500.00 82,500.00

automatic operation as required

18 MR u PVC PIPING -

Supply of uPVC pipes (10kg. Pressure pipe) including (6 Kg fittings) accessories & fittings as required (Elbow, Job 1

18.1 MR MTA, Endcap, Socket, Tee, Reducing Tee etc.) 95,000.00 95,000.00

19 VALVES / OTHER ACCESSORES -

19.1 MR Supply of 63 mm dia uPVC Ball valves complete as required. Nos 6 1,200.00 7,200.00

SITC of 80 mm dia Dual Plate Non return valve , Including rubber gasket, flanges, nuts, bolts, washers No 1

19.2 MR complete as required. 8,250.00 8,250.00

SITC of 80 mm dia C.I. butterfly valves, Including rubber gasket, flanges, nuts, bolts, washers complete as No 1

Supply and fixing of 100 MM long spool piece with welded flanges at both ends complete as required. No 2

Supply and fixing of header for distribution from pumpset to diffusers and nozzle complete job as required. No 1

CABLE AND CONDUITING. -

20 Supply of double sheated cables of various sizes including accessories etc required (PVC Conduit, PVC Bend,

MR Steel wire, etc.) for final equipment connections with control panel. -

21.1 MR Three Core flat submerrsible cable (Motors) 3 core x 2.5 sq mm Job 1 7,850.00 7,850.00

51 Digitally signed by SANJAY

21.2 MR Wire 1.5mm Four Core round flexible sheathed insulated( Lights) Job 26 1,250.00 32,500.00

23 MR SHOP DRAWINGS AND INSTALLATION CHARGES INCLUDING CARTAGE TO SITE Job 1 25,000.00 25,000.00

52 Digitally signed by SANJAY

SCHEDULE OF QUANTITIES (LIFT WORKS)

S NO HSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO HSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

Supply, Installation, Testing and Commisioning of lift (Machine Room Less ,

Hydraulic Lift ( no pit required ) – MRL type), 6 Pax, 2 Stops, 1 mps, Mixed

Finish No. of unit - 400 Kg, 6 persons.,1 mps,10 m approx.,2 Stops With (all

opening on the same side) with floors designation as: 0 & 1.,Microprocessor

Based,VF Regenerative (Closed Loop),400/415 Volts (3 Phase AC),Full

collective operation,One Car (Simplex),PM Gearless (Located in shaft on top

of guide rails),Flat Coated Steel Belt,• Rear Mid Panel = Stainless Steel

Honeycomb (Scratch Resistant) Finish with thickness 1.2 mm.

• Rear Corner Panels = Stainless Steel Honeycomb (Scratch Resistant) Finish

with thickness 1.2 mm.

• Side Panels = Stainless Steel Honeycomb (Scratch Resistant) Finish with

thickness 1.2 mm.

• Front Panels = Stainless Steel Honeycomb (Scratch Resistant) Finish with

thickness 1.2 mm.CD-41 Stainless Steel #4(Hairline) Cross flow fan Stainless

Steel Mirror Finish Handrails on rear car panels

20 mm recess to accommodate GRANITE (GRANITE to be provided by

customer.) Stainless Steel Honeycomb (Scratch Resistant) Finish with 1 each 1921778.00 1921778.00

thickness 1.2 mm. Powder Coated (DA Grey) finish.

Pit size 1500x1500 with suitable car size or as per IS Center Opening (CO)

doors 800 mm W x 2000 mm H DC Door Operator Stainless Steel #4(Hairline)

Monochrome LCD-Blue Background & White font O2000 Flat Type Fixture

Stainless Steel #4(Hairline) Hall Button with HPI Automatic Rescue operation

Three-way Intercom Voice Synthesizer Belt Inspection Device – Pulse System

Overload Sensor Device Manual Rescue Operation Auto Fan & Light Cut Off

(Sleep Mode) Emergency Alarm Button Emergency Firemen’s Service

Emergency Car Light Unit Infrared Curtain Full Door Protection Door Time

Protection Anti-nuisance Car Call Protection Independent Service (for Duplex

only) Anti-Nudging Extra Door Time of Lobby & Parking Door Open/Close

Button In-built Phase Reversal Over-Voltage Protection Device. quote

involving civil work complete and lift licence and other statutory licence if any

with regard to licence and operation.

Digitally signed by SANJAY