Loading
Loading…
Loading…
Tender ID
Tender Value
₹37.7 L
EMD Value
₹75,300
Closing Date
7 Apr 2026, 10:30 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRAWING
12 conditions · 1 needing a document upload
No Technical and Financial credentials are required for tenders having advertised value up to Rs 50 lakh. except valid 'B' grade license. "The individual / firm should have minimum valid "B" grade electrical license or above and should be on their own name/Firm name issued by the Electrical Inspectorate of the respective State Electrical Licensing Board". The License should have been issued on a date prior to the date of Tender opening. Clear scanned copy is to be submitted along with the tender. A copy of license should be uploaded through IREPS with their offer, failing which the tender will be summarily rejected.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
6 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure -V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV) / Hindu Undivided Family (HUH / Limited Liability Partnership (LLP) etc, as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
The tenderer shall submit all documents related to the constitution/formation of the firm as required in the tender document; failing which, the offer will be summarily rejected.
HYB DIV:TSMD/MLY: Upgradation / Development of the maintenance infrastructure and maintenance facilities for Vande Bharat Trains
08_TSMDMLY_2025-26
08_TSMDMLY_2025-26
Open
Works - General
12 Months
Medchal‐malkajgiri, Telangana
₹0
₹75,300
7 Apr 2026
14 Mar 2026
24 Mar 2026
185 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 37,66,206.52 | ||
| — | 96.00 | — | — | ||
| HALF HT. PARTITION Providing and fixing at site 1200(h) half height partition with 50 x 25 x 1.2 mm Aluminium box frame at 600 to 900 mm c/c. or as per the drawing to be erected. The frame is to be sandwiched with 8mm thick BWP ply/ HDF to be fixed from both sides.The partition is to be finished with 1.0 mm thick approved colour laminate of standard with 8mm ply & laminated finish, all exposed wooden members to have natural colour polish with matching colour, the cost shall include necessary fittings, labour, contingencies etc complete strictly as per the given drawing. (12+12=24X4=96 Rft) | — | — | — | 99,573.12 | |
| — | 9.00 | — | — | ||
| Modular Boxes :33 Height X 21 Depth X 28 Length | — | — | — | 16,567.2 | |
| — | 40.00 | — | — | ||
| Race way Duck for Power Socket | — | — | — | 1,085.6 | |
| — | 10.00 | — | — | ||
| 6 Modular Plate 16x6Ams inductor Switch & Socket 10x2=20 No Switch & Socket | — | — | — | 1,604.8 | |
| — | 5.00 | — | — | ||
| Split Air Conditioner Including Green AC, Wall Mount Type | — | — | — | 1,71,995 | |
| — | 4.00 | — | — | ||
| Torque wrench ratchet type 1/2 " drive 10-60 Nm | — | — | — | 17,520 | |
| — | 4.00 | — | — | ||
| Torque wrench ratchet type 1/2" drive 60-330 Nm | — | — | — | 24,580 | |
| — | 2.00 | — | — | ||
| Torque wrench ratchet type 1" drive 480-1500 Nm | — | — | — | 87,800 | |
| — | 4.00 | — | — | ||
| Socket set 12.7 mm (1/2") square drive standard packing set (19 sockets - 11,12,13,14,15,16,17,18 ,19,21,22,23,24,26,27,28,29,30,32mm + 05 accessories) | — | — | — | 18,800 | |
| — | 2.00 | — | — | ||
| Socket set 25.4 mm (1") square drive standard packing set (10 sockets - 36,41,46,50,55@44<44A44F44K44@80mm + 04 accessories) | — | — | — | 79,300 | |
| — | 2.00 | — | — | ||
| Deep socket set 1/2: drive ( 11 sockets -8,10,12,13,14,16,17,18,19,21,24mm) | — | — | — | 3,800 | |
| — | 4.00 | — | — | ||
| Single head spanner 36 generally confirming to IS 2028-2004 | — | — | — | 1,012 | |
| — | 4.00 | — | — | ||
| Single head spanner 46mm generally confirming to IS 2028-2004 | — | — | — | 2,172 | |
| — | 4.00 | — | — | ||
| Single head spanner 50mm generally confirming to IS 2028-2004 | — | — | — | 3,140 | |
| — | 4.00 | — | — | ||
| Single head spanner 55mm generally confirming to IS 2028-2004 | — | — | — | 4,160 | |
| — | 4.00 | — | — | ||
| Extension rod for ratched 1/2" drive generally confirming to IS 7991*2016& 7975**2018 , | — | — | — | 1,152 | |
| — | 4.00 | — | — | ||
| T- handle 1/2" generally drive generally confirming to IS 7991*2016& 7975**2018 , | — | — | — | 1,268 | |
| — | 6.00 | — | — | ||
| Double End spanners set HSN code : 82041110 size(6,8,10,12,14,16,18,21, 20,24,25,30mm) | — | — | — | 5,640 | |
| — | 6.00 | — | — | ||
| Double RING Spanners set HSN code:82041110 | — | — | — | 9,744 | |
| — | 5.00 | — | — | ||
| Allen key set HSN code:82041120, | — | — | — | 1,130 | |
| — | 4.00 | — | — | ||
| Inside calliper 250mm | — | — | — | 1,280 | |
| — | 4.00 | — | — | ||
| Outside calliper 250mm | — | — | — | 1,280 | |
| — | 4.00 | — | — | ||
| Nose plier generally confirming to IS 565-1990, | — | — | — | 1,032 | |
| — | 6.00 | — | — | ||
| Screw driver | — | — | — | 1,188 | |
| — | 10.00 | — | — | ||
| Hammer (Ball pein) generally confirming to IS 841-1983 | — | — | — | 2,370 | |
| — | 2.00 | — | — | ||
| Sledge hammer 1800 gms generally confirming to IS 841-1983, | — | — | — | 2,948 | |
| — | 2.00 | — | — | ||
| Sledge hammer 3600 gms generally confirming to IS 841-1983, | — | — | — | 4,340 | |
| — | 2.00 | — | — | ||
| Sledge hammer 5400 gms generally confirming to IS 841-1983, | — | — | — | 5,730 | |
| — | 5.00 | — | — | ||
| Piper wrench medium 350 mm generally confirming to IS 4003 part II -1986, | — | — | — | 5,200 | |
| — | 5.00 | — | — | ||
| Piper wrench medium 600 mm generally confirming to IS 4003 part II -1986, | — | — | — | 11,850 | |
| — | 2.00 | — | — | ||
| Bench vice 200 mm | — | — | — | 18,320 | |
| — | 10.00 | — | — | ||
| Tommy bar 750 mm generally confirming to IS 2030-1989 | — | — | — | 4,610 | |
| — | 15.00 | — | — | ||
| 46PC 1/4 SQ.DR. SOCKET & BIT SET | — | — | — | 47,310 | |
| — | 10.00 | — | — | ||
| 12DR 26PCS PEAR HEAD RATCHET SET METRIC | — | — | — | 65,370 | |
| — | 10.00 | — | — | ||
| 7PC 1/2 SQ. DR. HEX BIT SOCKET SET MET | — | — | — | 16,550 | |
| — | 5.00 | — | — | ||
| 1/4" TORQUE WRENCH 5-25 NM 3% AC | — | — | — | 58,820 | |
| — | 5.00 | — | — | ||
| 1/2" SQ DR TORQUE WRENCH (12-68 Nm) | — | — | — | 77,350 | |
| — | 5.00 | — | — | ||
| 1/2" SQ DR TORQUE WRENCH (70-330 Nm) | — | — | — | 97,370 | |
| — | 12.00 | — | — | ||
| 5PC. EXTRACTORS SET - (3, 6, 8, 11, 14MM) | — | — | — | 7,104 | |
| — | 3.00 | — | — | ||
| FOOT PUMP | — | — | — | 3,927 | |
| — | 40.00 | — | — | ||
| 12PC DOE SPANNER SET 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x27, 25x28, 30x32MM | — | — | — | 41,560 | |
| — | 40.00 | — | — | ||
| "12PC 6X7, 8X9, 10X11, 12X13, 14X15, 16X17, 18X19, 20X22, 21X23, 24X27, 25X28, 30X32MM" | — | — | — | 91,400 | |
| — | 40.00 | — | — | ||
| LINESMAN TESTER 5mm | — | — | — | 3,640 | |
| — | 40.00 | — | — | ||
| FIX BAR SCREWDRIVER - FLAT 8 x 300 | — | — | — | 6,680 | |
| — | 40.00 | — | — | ||
| 8PC LONG HEX KEY SET | — | — | — | 31,600 | |
| — | 40.00 | — | — | ||
| FM MULTIUSE 5-IN-1 DIAGONAL CUTTING PLIER | — | — | — | 84,480 | |
| — | 40.00 | — | — | ||
| WIRE STRIPPER(CUTTER)-AWG12-22, 150MM-6 | — | — | — | 39,600 | |
| — | 3.00 | — | — | ||
| "Note Book for fault analysis, CCTV footage retrieval, and software updation for EMU/MEMU rakes" | — | — | — | 1,80,000 | |
| — | 10.00 | — | — | ||
| HALF-OPEN CAULKING GUN | — | — | — | 3,970 | |
| — | 40.00 | — | — | ||
| WIRE CUTTER, 130MM 5 1/4'' | — | — | — | 15,480 | |
| — | 5.00 | — | — | ||
| RIVETER-HEAVY DUTY, C/W 4 NOZZLES | — | — | — | 4,300 | |
| — | 5.00 | — | — | ||
| 1/2" 6 PT STANDARD SOCKET (HEX) 32 mm | — | — | — | 1,235 | |
| — | 5.00 | — | — | ||
| DEEP OFFSET BI-HEX RING SPANNER - CRV 32x36 mm | — | — | — | 4,970 | |
| — | 5.00 | — | — | ||
| DEEP OFFSET BI-HEX RING SPANNER - CRV 41x46 mm | — | — | — | 20,385 | |
| — | 5.00 | — | — | ||
| DEEP OFFSET BI-HEX RING SPANNER - CRV 50x55 mm | — | — | — | 36,680 | |
| — | 5.00 | — | — | ||
| 3.5 digit backlit LCD Hand Held True Rms Clampmeter | — | — | — | 16,700 | |
| — | 10.00 | — | — | ||
| Pipe wrench - 200mm (Stilison type) generally confirming to IS4003 (1)1978, | — | — | — | 2,350 | |
| — | 10.00 | — | — | ||
| Pipe wrench - 350mm (Stilison type) generally confirming to IS4003 (1)1978, | — | — | — | 4,750 | |
| — | 10.00 | — | — | ||
| Pipe wrench - 450mm (Stilison type) generally confirming to IS4003 (1)1978, | — | — | — | 7,800 | |
| — | 10.00 | — | — | ||
| Heavy duty Pipe wrench - 350mm Generally confirming to IS4003 II 1986, | — | — | — | 10,400 | |
| — | 10.00 | — | — | ||
| Heavy duty Pipe wrench - 450mm Generally confirming to IS4003 II 1986, | — | — | — | 17,250 | |
| — | 10.00 | — | — | ||
| MULTIMETER, 3-5/6 6000 Count TRMS Autoranging DMM with Temperature | — | — | — | 34,408.8 | |
| — | 20.00 | — | — | ||
| Allen key set -Black finish | — | — | — | 4,600 | |
| — | 20.00 | — | — | ||
| Double end spanner set, | — | — | — | 13,200 | |
| — | 5.00 | — | — | ||
| Single end open jaw spanner - 36mm confirming to IS2028-2004 | — | — | — | 1,265 | |
| — | 5.00 | — | — | ||
| Single end open jaw spanner - 38mm confirming to IS2028-2004 | — | — | — | 1,705 | |
| — | 5.00 | — | — | ||
| Single end open jaw spanner - 41mm confirming to IS2028-2004 | — | — | — | 1,855 | |
| — | 5.00 | — | — | ||
| Single end open jaw spanner -46mm confirming to IS2028-2004 | — | — | — | 2,715 | |
| — | 10.00 | — | — | ||
| Single end open jaw spanner - 50mm confirming to IS2028-2004 | — | — | — | 7,850 | |
| — | 10.00 | — | — | ||
| Single end open jaw spanner - 55mm confirming to IS2028-2004 | — | — | — | 10,400 | |
| — | 20.00 | — | — | ||
| "T" socket wrenche - 08mm HSN code: 82042000, P no.TSW8 of Taparia make or equivalent | — | — | — | 3,740 | |
| — | 20.00 | — | — | ||
| "T" socket wrenche - 10mm | — | — | — | 3,840 | |
| — | 20.00 | — | — | ||
| "T" socket wrenche - 11mm | — | — | — | 3,940 | |
| — | 20.00 | — | — | ||
| "T" socket wrenche - 12mm | — | — | — | 3,980 | |
| — | 20.00 | — | — | ||
| "T" socket wrenche - 13mm | — | — | — | 4,000 | |
| — | 20.00 | — | — | ||
| "T" socket wrenche - 14mm | — | — | — | 4,040 | |
| — | 20.00 | — | — | ||
| "T" socket wrenche - 15mm | — | — | — | 4,900 | |
| — | 20.00 | — | — | ||
| "T" socket wrenche - 16mm | — | — | — | 5,100 | |
| — | 20.00 | — | — | ||
| "T" socket wrenche - 17mm | — | — | — | 7,300 | |
| — | 10.00 | — | — | ||
| Socket set 12.7mm(½") square drive standard packing set 11,12,13,14,15, 16,17,18,19,21 ,22,23,24,26,27,28,29,30,32mm + 05 Accessories) | — | — | — | 47,000 | |
| — | 4.00 | — | — | ||
| Exective Revolving Chair | — | — | — | 64,000 | |
| — | 20.00 | — | — | ||
| Revolving Chair with center tilt mechanism | — | — | — | 2,05,100 | |
| — | 24.00 | — | — | ||
| Cantilever Office Chair Non-revolving and non-tilting chairwith armrest | — | — | — | 1,68,000 | |
| — | 1.00 | — | — | ||
| Providing and supplying 18 person seater modular table made in Pre- Laminated Particle Board | — | — | — | 3,06,800 | |
| — | 1.00 | — | — | ||
| Provision of audio system in the confrence hall | — | — | — | 5,19,717 | |
| — | 1.00 | — | — | ||
| Ultra wide conference camera with remote and high sensitive microphone | — | — | — | 49,990 | |
| — | 4.00 | — | — | ||
| Audio Video Television system for the control room | — | — | — | 3,18,000 | |
| — | 8.00 | — | — | ||
| BPE Line Interactive UPS with AVR of Rating 1.0 KVA | — | — | — | 35,600 | |
| — | 12.00 | — | — | ||
| Modernization of the SSE Rooms with office tables (8 for each section+ 2 for Control Room + 1 for Lab + 1 for Tandem Pitwheel lathe) | — | — | — | 1,74,588 | |
| — | 15.00 | — | — | ||
| Office Chairs (8 for each section+ 2 for Control Room + 3 for Lab + 2 for Tandem Pitwheel lathe) | — | — | — | 1,00,350 | |
| — | 1.00 | — | — | ||
| Conference Table Prelam Particle Board (both sides) | — | — | — | 15,000 | |
| — | 2.00 | — | — | ||
| Chairs to ADME and DEE office | — | — | — | 32,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
1Gcc.pdfSECURED.pdf
ATTACHMENT
1GCCamd.pdfSECURED.pdf
ATTACHMENT
AnnexureVAnnexureVA.pdf
ATTACHMENT
TenderBookletforupgradationofvb.pdf Tender Document
ATTACHMENT
TenderBookletforupgradationofvb.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .