SPECIAL REPAIR TO APTE BLOCK BLDG NO 105 COMPUTER SCIENCE DEPT FEL AT MCEME SECUNDERABAD

Amount

Demolition of cement concrete in roofs / floors other than ground floor of any desctription and position complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate as in padding concrete (levelling course) on roof complete all as specified and directed.

M&L APP based polymeric membrane minimum weight 3 Kg per Sqm, minimum 3 mm thick reinforced with polyster non wove febric (Wt not less than 150 gm per Sqm and including primed surfaces and over application of tack coat of industrial bitumen 85/25 @ 1.2 Kg/Sqm, preparation of surfaces, applying two coats of aluminium paint laid over and including 10 mm thick rendering in CM (1:3) using water proofing compound as per manufacturer instructions as in roof padding complete all as specified and directed. Note : Water proofing compound will be measured and paid separately.

Supply only Liquid water proofing compound complete all as specified and directed.

Dismantling floor, hearth or wall tiling and including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L vitrified ceramic tiles light shed 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

All as per Sl Item No. 06 above but as in vertical surfaces such as skirtings, dado, etc, laid over and including 10 mm thick rendering in CM (1:4) finished rought to receive wall tiles complete all as specified and directed.

M&L Anti-skid / Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L glazed ceramic coloured tiles 450x 300 x 6 to 7mm thick on vertical surfaces such as dados, wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces laid over and including 10 mm thick rendering in CM (1:4) finished rought to receive wall tiles complete all as specified and directed.

M&L 20 mm thick granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and rounding edges, over and including 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for laying floor finishes and polishing complete all as specified and directed.

M&L brickwork with fly ash modular bricks straight or curved on plan exc. 6 m mean radius built in CM 1:6 and including demolition complete all as specified

Taking down plastering in cement mortar on brick or stone wall / ceilings etc, and including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:6 and including finishing even and smooth without using with cement complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 in two layers and including finishing even and fair without using extra cement on external surfaces including mixing of water proofing compound complete all as specified and directed. NOTE: WPC will be measured and paid separately.

M&L 5 mm thick cement plaster 1:3 on ceiling and including finishing even and smooth without using extra cement complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:3 on fair faces of brick work, chajja, facia, slabs etc, finished even and smooth without using extra cement complete all as specified and directed.

M&L preparition of new plastered wall surfaces and including applying two coats of OBD over a coat of alkali resistant primer laid over and including 3 mm thick wall care putty complete all as specified and directed.

M&L complete removal of existing treatment on wall surfaces and including applying two coats of OBD over a coat of alkali resistant primer laid over and including 3 mm thick wall care putty complete all as specified and directed.

M&L preparation of new plastered ceiling surfaces and including applying three coats of white wash complete all as specified and directed.

M&L preparation of old plastered ceiling surfaces and including applying one coat of white wash complete all as specified and directed.

M&L preparation of new plastered wall surfaces and including finishing with premium acrylic smooth exterior paint with silicone additives of required shade: New Work (Two or more coats applied @ 1.43 lts / 10 sqm over and including priming coat of exterior primer applied @ 2.2 kg/10 sqm) complete all as specified and directed.

M&L complete removal of existing treatment of wall surfaces and including finishing with premium acrylic smooth exterior paint with silicone additives of required shade: New Work (Two or more coats applied @ 1.43 lts / 10 sqm over and including priming coat of exterior primer applied @ 2.2 kg/10 sqm) complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in plinth protection / paths finishing cement concrete surface even and smooth without using extra cement and including demolition complete all as specified and directed.

M&L removing loose and broken concrete by chiselling / picking etc, upto a depth of 10 to 20 mm from floor / roof slab / chajjas and similar structural members and including cleaning the dismantled portion with wire brushes etc, to remove dust, dirt and other foreign particles with necessary scaffolding etc, and removal of debris to a distance not exceeding 50 m and including application of high build polymer modified cement mortar (1:2.5) mixed with 3 kg SBR per bag of cement in ceiling surfaces 10 to 20 mm thick in two layers surfaces over a coat of bonding agent Nito Bond SBR (1 Ltr SBR + 1 Ltr) water + 3 kg cement) complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) as in chajjas and similar suspended works and including demolition complete all as specified and directed.

Form work to chullah hoods, chajjas, troughs and similar items and including edges complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping and including necessary form work complete all as specified and directed.

M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L welding in repairs exc 2.5 cm and n. exc. 5 cm in length, thickness of metal to be welded n.exc. 6 mm, on steel windows / ventilators and steel door shutters of any description complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S Square tube, in opening as per manufacturers instructions complete all as specified and directed.

S&F factory made solid panel laminated PVC door shutter 30 mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail: panelling of plain colour PVC sheet to be fitted in the M.S frame welded / scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specifications & drawing complete all as specified and directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

S/F 150 mm size aluminium anodised handles, fabricated type complete all as specified and directed.

S/F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed (in RCC Jalli).

M&L dismantling of wrought iron or mild steel work of any description not otherwise provided for collapsible steel gate complete all as specified and directed.

S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and directed.

M&L preparation of new steel or iron surfaces of any description over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L preparation of old surfaces of wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and including applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and including applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets any thickness, including cover filltets and grids and including S&F for true horizontal level 600 x 600 mm panels false ceiling system using hot dipped galvanized steel sections exposed surface with pre-coated capping, main tee of size 24 x 32 mm at every 1200 mm c/c maximum, rotary stitched cross Tee of size 24 x 27mm at every 1200 mm c/c and wall angle of size 19 x 19mm fixed to perimeter wall. The complete grid is to be suspended at every 1200 mm c/c in both directions by using 2 mm dia pre straightened GI wire at every 1200 mm interval at the main Tee using fine finished tagular edge and including 8-9mm thick Gypsum boards of size 600 x 600 mm with rear side Aluminum grill and front side PVC lamination complete all as specified and directed.

S&F in repairs, vitreous china squatting pan, 'orissa' pattern of size 580 x 440 mm white, with integral foot rests and including concrete bedding & CI 'P' trap 100 mm complete all as apecified and directed. Make: Cat No 20042 of Hindware / Cat No 4055 of Prayag

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) and including 'P' or 'S' trap with necessary fixing arrengement, plastic water closet seat cover white with recessed bottom and cover fixed with aluminium hinging device complete all as specified and directed. Make: Cat No 20011 of Hindware / Cat No 4017 of Prayag

S&F in repairs, PVC low level flushing cistern 10 litres capacity complete all as specified and directed. Make: Cat No Sleek essence single flush of Hindware/ Cat No 501 of Prayag

S&F in repairs, vitreous china wash basin white flat back size 550 x 400 mm with brackets and including cutting for and pinning in ends of brackets or erecting stand, waste coupling CP brass 32 mm dia with long screwed shanks & fly nuts & fancy type CP pillar tap 15 mm bore complete all as specified and directed. Make: Cat No 10076 of Hindware / Cat No 4724 of Prayag

S&F in repairs soap dish, vitreous china white, approximate size 160 x 160 x 90 mm, fixed to plugs with chromium plated brass screws complete all as specified and directed. Make: Cat No F880011GRT of Hindware / Cat No BA-15S of Prayag

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. Make: Cat No F880010 of Hindware / Cat No BEA-45 of Prayag

S&F in repairs CP brass tubular towel rail 600 mm long 20 mm dia 'D' type complete all as specified and directed. Make: Cat No F580012 of Hindware / Cat No BA-10S of Prayag

S&F in repairs 15 mm bore bib taps fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule complete all as specified and directed. Make: Cat No F440003 of Hindware / Cat No 7706 of Prayag

S&F in repairs CP 15 mm bore stop valves / angle cock, fancy type cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as specified and directed. Make: Cat No F360006 of Hindware / Cat No 8510 of Prayag

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook and including making connections and fixed in position complete all as specified and directed. Make: Cat No F100110 of Hindware / Cat No BEA-40 of Prayag

S&F 15 mm dia 600 mm long PVC water connection with PTMT nuts and washers complete all as specified and directed.

S&F 15 mm dia 450 mm long PVC water connection with PTMT nuts and washers all as specified

S&F PVC (SWR) floor trap 75 mm dia plain with grating and including jointing with solvent cement complete all as specified and directed.

S&F in repairs 32 mm bore low density polythelyne pipes (LDPE) of pressure rating 6 kgf / cm2 fixed complete to wall or in floors etc, as in outlet pipe for WHB etc, complete all as specified and directed.

S&F in repairs vitreous china urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. Make: Cat No 60011 of Hindware / Cat No 4998 of Prayag

S&F in repairs vitreous china urinal partition white of size 310 x 700 mm complete all as specified and directed. Make: Cat No 61001 of Hindware or equivalent in Prayag

S&F in repairs 15 mm bore unplasticised PVC pipes of pressure rating 10 kgf / cm2 fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

All as per Sl Item No. 60 above but 20 mm bore.

Cutting chases, pinning in making good to facing where required of brick walls and pointed in cement mortar 1:3 for concealed water tubing etc, cutting not exc. 10 cm girth complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and including 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (min weight 210 gms) and dismantling of existing water tank of any size complete all as specified and directed.

S&F in repairs gun metal globe or gate valves of 20 mm bore with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and laid in trenches and under floor etc, complete all as specified and directed.

All as per Sl. Item No. 65 above but 75 mm bore.

S&F 110 mm PVC (SWR) bends of any radius complete all as specified and directed.

All as per Sl. Item No. 67 above but 75 mm bore.

S&F PVC (SWR) gully trap 125 / 110 mm setting and jointing with solvent cement complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs CP curtain rail / drapery rod 20 mm dia of approved pattern along with decorative SS brackets of approved quality with knob and pattern fixed with screws (2 Nos. of bracket for each window) complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:3 on sunken concrete floor surfaces mixed with integral water proofing compound finished even and smooth without using extra cement and including applying brush applied water based PU dispersed polymer modified Elastomeric liquid membrane, ShaliUrethane BTD with Zero VOC or of any approved make - STP / Fosroc / BASF to form the membrane in situ at site with 3 layers of monolithic, seamless finish having > 500% elongation. The first layer is to be formed mixing with clean water in the ratio of 1:1 @ 400 Gms per Sqm and shall act as the prime coat to fill in the cavities.This can be brush or

roller applied. For spray application, using any airless spray system with recommended nozzle size at 30:1 at 2 bar pressure. Providing and applying the second coat @ 1 kg per Sqm using the soft brush, roller or spray system with the recommended nozzle size on to the primed surface. Providing and applying 50 Gsm fiber cloth over the 1st coat, when substrate till the coat is tacky. Providing and applying 3rd coat @ 1kg / Sqm to finish the application for a thickness of 1.5 mm membrane formed in place. The second coat should be applied perpendicular to the first coat for cross linkage and complete as per the specification and including demolition complete all as specified and directed. NOTE: WPC will be measured and paid seperately.

BLANK

M&L 25 mm thick PCC 1:2:4 type BI using 20 mm graded stone aggregate as in foundation, filling in sunken portions and mass concrete complete all as specified and directed.

M&L PCC type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in filling and mass concrete as in sunken floors and including demolition compete all as spefified and directed..

S&F in repairs stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen or laboratory with plug, waste coupling CP brass , washers waste pipe, cast iron cantilever brackets, connecting union overall size 915 mm x 460mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs counter top basin of size 610 x 475 x 210 mm (Queens) of complete all as specified and directed.

S&F 1.60 mm thk mild steel, plain, sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams and including bending or turning up, mitred angles, etc. complete all as specified and directed.

M&L point wiring for one light / fan point controlled by one switch complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceilling, continous earth wire 1.5 Sqmm PVC insulated FR-LSH unsheathed 1100 Volts multistanderd copper conductor connected to common earth and dolly, necessary modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting for modular switches / sockets / fan regulators etc, and including taking down existing complete all as specified and directed.

All as per Sl. Item No. 79 above but one three pin switch socket 6 Amps outlet on independent board.

All as per Sl. Item No. 79 above but one three pin switch sockets 6 Amps outlet on same board.

All as per Sl. Item No. 79 above but one bell point controlled by one bell push.

All as per Sl. Item No. 79 above but one light point controlled by two way switches.

All as per Sl. item No 79 above but with cable 4 sqmm multi stranded copper FR-LSH wire, 1100 Volts grade, unsheathed for one 3 pin socket out let 16 amps on independent board including, continuous earth wire PVC insulated 4 sqmm copper stranded conductor FR-LSH, 1100 Volts grade.

S &F modular switch 1 way 6A, 1 module all as specified and directed.

S&F modular switch 2 way 6A, 1 module complete all as specified and directed.

S&F modular switch 1 way 16A with indicator , 1-module complete all as specified and directed.

S&F modular socket, shuttered type, 6A-3 PIN 2-module all as specified and directed.

S&F modular socket, shuttered type 6 / 16A - combined 2- module complete all as specified and directed.

S&F modular bell push 6A, 1 module

S&F modular bell, 1 module, ding dong AC 230 Volts, single pole complete all as specified and directed.

S&F power module 240V, 20A and including with 4 module metal flush box, cover plate, starter, plug & socket complete all as specified and directed..

S&F 3 pin, 6A, 230 V ceiling rose conforming to IS 371:1999 and having terminal capacity 3 x 1.5 mm2 with IK 04 and IP 20 protection as specified in IS 732 : 2019 complete all as specified and directed.

S&F in replacement of sheet metal enclosure vertical type MCCB DB TPN 6 way double door with suitable rated bus bar 415 volts suitable for MCCB as incomer with magnitic locking system complete all as specified and directed.

S&F single pole & neutral, double door metalic distribution board 12 ways conforming to IEC 614393, suitable for flush / surface mounting with provision for DP RCCB / RCBO / isolater / MCB as incomer and SP MCBs as outgoing, reversible metal door, 100 A copper busbar, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. having IK 09 & IP 43 protrction all as specified in IS 732 : 2019 and including taking down complete all as specified and directed.

All as per Sl. Item No. 95 above but TPN double door 4 ways.

S&F MCB TPN 40 to 100 Amps, 415 volts of rupturing capacity 10 KA, 'B' series and including taking down complete all as specified and directed.

S& F MCB ('B' curve) 6-32 A, 230 Volts, 50 Hz, SP for conforming to IS/IEC 60898-1-2002, Having breaking capacity Icn = 10KA, Sliding bottom clamp, colour coded on/off indicating on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. as specified in IS 732:2019 and including taking down complete all as specified and directed.

S&F RCBOs for earth leakag, overloaded & short-circuit protection 6-32 A, 230 V, 50Hz, double pole, 30 MA rating as specified in IS 12640-1 (2008) and including taking down complete all as specified and directed.

S&F RCBOs for earth leakage, overload & short-circuit protection 6-32 A, 230 V, 50Hz, TPN, 30 MA rating as specified in IS 12640-1 (2008) and including taking down complete all as specified and directed.

S&F MCCB, 415V, 16 KA, 4 pole, 160 Amps and including taking down complete all as specified and directed.

M & L submain wiring using 4 runs 10 Sqmm of FR-LSH grade PVC insulated, unsheathed, stranded, copper conductor cable conforming to IS 694 : 2010 and two runs of 10 Sqmm FR-LSH grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including not less than 32 mm size PVC Conduit (medium grade) in concealed wiring of suitable size and including making good of disturbed surface of wall / ceiling / floor as specified in IS 732: 2019 and taking down complete all as specified and directed. Note : 4 runs of 10 Sqmm copper wire, 2 runs of 10 Sqmm copper wire & one run PVC Conduit shall be measured as one unit

M & L submain wiring using 2 runs 4 Sqmm of FR-LSH grade PVC insulated, unsheathed, stranded, copper conductor cable conforming to IS 694 : 2010 and one run of 4 Sqmm FR-LSH grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including not less than 25 mm size PVC Conduit (medium grade) in concealed wiring of suitable size and including making good of disturbed surface of wall / ceiling / floor as specified in IS 732: 2019 and taking down complete all as specified and directed. Note : 2 runs of 4 Sqmm copper wire, 1 run of 4 Sqmm copper wire & one run PVC Conduit shall be measured as one unit

All as per Sl. item No. 103 of above but 6 sqmm cable. Note : 2 runs of 6 Sqmm copper wire, 1 run of 6 Sqmm copper wire & one run PVC Conduit shall be measured as one unit

M&L connecting and removing fan of any sweep any height from electric conduction bringing down, dismantling, cleaning intenally and externally throughly examine and replacement of split pins / cottor pins and check nuts etc overhauling, lubricating, reassembling, refixing in original position with new down rod and clamps complete all as specified and directed.

M&L disconnecting and removing exhaust fan of any size from electrical connection bringing down, dismantling, cleaning intenally and externally throughly examine and overhauling, lubricating, reassembling, refixing in original position complete all as specified and directed.

BLANK

Supply & replacement of electronic type fan regulator stepped socket type, suitable to work on 230 volts complete all as specified and directed.

S&F TV CO- Axial socket outlet 1 module type complete all as specified and directed.

S&F telephone socket outlet (RJ 11) 1 module type complete all as specified and directed.

S&F rigid non-metalic PVC conduit dia 32 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.complete all as specified and directed.

S&F rigid non-metalic PVC conduit dia 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed.

S & F junction boxes (1 to 4 way) of rigid non metalic PVC conduit of 32 mm bore complete all as specified and directed.

S & F junction boxes (1 to 4 way) of rigid non metalic PVC conduit of 25 mm bore complete all as specified and directed.

Supply & replacement of 20 W ( minimum 120 lumem / watt) surface / wall mounted LED batten having PC diffuser, luminous efficacy of minimum 100 lumen/w, CRI>80, PF>0.9, CCT 6500K, independent isolated SMPS pased constant current electronic LED driver with THD<20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, with rated life 50,000 burning hours, system efficiency/ lumens 120 lumen per watt and housing made up of aluminium, white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input freqency 50-60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

Note: Contractor shall submit TDS ( Technical Data Sheet) alongwith sample approval Make: Havells-ENDURALINE APRROBSO20W LED 865SPCSSIND/ Philips BN 170CLED 20S- 6500PSUL120/ WIPRO LL24-311-XXX-65-HE

All as per Sl. item No. 115 above above but 10 W

Make: Havells-LUMILINEPLUSNE OBS 10W LED 865 SPCSSINDS / Philips - BN021LED1256500PSUGR / Wipro -LL20-111-XX-65ALI

Supply & replacement of LED luminarie 600 mm x 600 mm 35 / 36 watts, 220 volts, AC recessed mounting light fixture type with high efficiency rated life 50,000 burning hours & system efficiency / lumens 120 lumens / watt diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver 3 core flexible copper conductor cases of suitable size complete with lumianrie system efficacy>100 im/w with IP & surge protection of 10 KV, power factor > 0.95 complete with all accessories complete all as specified and directed.

Note: Contractor shall submit TDS ( Technical Data Sheet) alongwith sample approval Make: Havells-PLAN02X2PLR36WLED857SG2 / Philips RC 380B LED30S-6500G5 L-60W60 /Wipro CR Co10R038HP57GILI

Supply & replacement of 35 w security light having efficiency long life LED moudule with SMD LED package mounted on MCPCB with high LED efficiency of rated life of 50,000 burning hours of >110 lumen/watt. Integral SMPS pased constant current electronic LED DRIVER WITH thd <20%, surge voltage protection and other safety tests as per IS 15885 (PART-2/SEC-13): 2012, ip 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink of effective thermal management, sturdiness, excellent corrosin resistance, separate optical and controll gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting with bracket arm OD Conductor cable of appropriate size and including 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including necessary GI clamps, nuts, bolts & washer with two coats of synthetic enemel paint over a coat of red oxide primer complete all as specified and directed.

Note: Contractor shall submit TDS ( Technical Data Sheet) alongwith sample approval Make: Havells ENUDRASUNDOWNSL35WLED 765 PASYBOPC/ Philips BRPO42PLED30CWMRSIPSAUGRSPDP4371/ Wipro LR06-501-XXX-57-XX

M&L earthing complete with galvanized steel each plate electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less then 2.25 m deep below normal ground level) with top edge of plate not less then 1.5 m below noramal ground level, earth plate connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate no 3 of MES SSR-2009 (part I specifications) connected to eath test point all as specified or indicated including tesing on completion, including necessary exavation and earth work in any type of soil and adequate quantity of commen salt & charcoal for alternate layer arround the earth plate, including PCC (1:2:4) pit and 10 mm thick C.I cover with arrangement of hinge to 40 x 40 x 6 mm C.I angle iron frame, including 20 mm dia C.I pipe for watering purpose with the arrangement of funel and wirw mess, including G.I pipe of 15 mm dia for earth lead protection and including taking down complete all as specified and as directed.

Note : the rate is deemed to be inclusive of the cost of earth work exavation on any type soil and removal of surplus soil to a distance of 50 m, PCC 1:2:4 type B1 for earth pit cover 6 nos. 8 mm dia TMT bars on both direction, earth lead protection GI pipe medium grade with suitable size from earth plate electrode to main switch, GI wire length up to 7.50 m will measured as one unit

Supply and installing of perforated hot dipped galvanised iron cable tray with cover, perforation not more then 17.5%, in convinent section, joined with conductors, bends, tees, reduce etc. including GI bolts & nuts, etc. as required for size 150 mm width x 50 mm depth x 1.6 mm thickness and taking down complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each complete all as specified and directed.

S&F Anodised aluminium frame (Powder Coated) for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F anodised aluminium door shutters (Powder Coated), aluminium section weighing 0.55 kg/ m and including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F powder coated three tire Anodised aluminium window and ventilator shutters without sash bar, aluminium section weighing 0.55 kg/m and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sqm in each panel complete all as specified and directed.

S&F 4 mm thick figured glass pin head type and glazing with oil putty in square n. exc. 0.50 Sqm in each pane complete all as specified and directed.

S &F Prelaminated particle board of thickness 18 / 19 mm, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame.

S&F anodised (powder coated) aluminium grill of weight not less than 2.07 kg / Sqm (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre and including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed.

S&F door closer hydraulically regulated of Aluminium (die cast body), designation No.3 universal type suitable for door shutters of 851 to 1200 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F aluminium mortice lock, vertical type, size 100 mm, long 4 levers with handles complete all as specified and directed.

S&F 125 mm long butt hinges extruded aluminium alloy anodised with mild steel hinge pin complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and directed.

Supply, laying, jointing and testing, fixing to wall using clamps / pole / floor or in air or passing through pipes/ ducts / road/ path/ drain, laid in trenches 1100 volts grade heavy duty electric cable XLPE insulated, screened, PVC bedded, galvanished steel wire or wire armoured with electric power cable 1100 volts grade with stranded aluminium conductor of size 3.5 core 70 sqmm conforming to IS-7098 part -I and its latest amendments and including taking down complete all as specified and directed.

Excavation in trenches in soft / loose soil not execeeding 1.5 m wide & not exceeding 1.5 m in depth and not exceeding 10 Sqm on plan for laying cables in trenches/ erection of pole / stay assembly and getting out complete all as specified and directed.

M&L sand cushioning to under ground cable with dry sand complete all as specified and directed. Note. Punned thickness of sand to be considered for measurement purpose.

Removing of suplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above starting point complete all as specified and directed.

Returning filling in trenches, spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose soil complete complete all as specified and directed.

Supply and laying burnt bricks sub class "B" of old size laid dry in trenches complete all as specified and directed.

S&F 50 mm bore GI pipe medium grade as protection to cable along the pole / across road crossing / through culvert/ passing through ceiling/ walls with necessary clamps - 02 Nos (FI 50 x 6 mm) with suitable nuts and bolts for fixing on pole complete all as specified and directed.

Vara Enterprises (BID ID -3382274)

SAI RUPA CONSTRUCTIONS (BID ID -3380135)

harshraj and co (BID ID -3378181)

PAVAN ENTERPRISES (BID ID -3379341)

Sri Associates (BID ID -3382318)

A SOMA RAJU (BID ID -3382114)

STANDARD AGENCIES (BID ID -3381682)