REPAIR MAINT OF CENTRIFUGAL PUMP SETS IN THE AREA OF AGE U WS III UNDER GE U WATER SUPPLY DELHI CANTT 10

Amount

Opening the electric induction motor of cap 10-20 HP and taking out the burnt winding wire complete and cleaning the slots, rewinding the motor with super enamalled copper winding wire of existing gauge including all other insulating material complete all as specified and as directed. Note : "Copper winding wire of appropriate gauge will be measured under item No. 18 as supply only"

Opening the electric induction motor of cap 30-40HP and taking out the burnt winding wire complete and cleaning the slots, rewinding the motor with super enamalled copper winding wire of existing gauge including all other insulating material complete all as specified and as directed. Note : "Copper winding wire of appropriate gauge will be measured under item No. 18 as supply only"

Opening the electric induction motor of cap 50-75 HP and taking out the burnt winding wire complete and cleaning the slots, rewinding the motor with super enamalled copper winding wire of existing gauge including all other insulating material complete all as specified and as directed. Note : "Copper winding wire of appropriate gauge will be measured under item No. 18 as supply only"

Disconnecting of electrical connection from panel board and taking out electic motor capacity 10-20 HP from base plate of pump set after opening the nuts, bolts and transporting the motor to workshop and back, reinstalled after repair and testing complete all as specified and as directed.

Disconnecting of electrical connection from panel board and taking out electic motor capacity 30-40 HP from base plate of pump set after opening the nuts, bolts and transporting the motor to workshop and back, reinstalled after repair and testing complete all as specified and as directed.

Disconnecting of electrical connection from panel board and taking out electic motor capacity 50-75 HP from base plate of pump set after opening the nuts, bolts and transporting the motor to workshop and back, reinstalled after repair and testing complete all as specified and as directed.

Supply and fixing in replacement of terminal box for 30-40 HP Motor.

Supply and fixing in replacement of terminal box for 50-75 HP Motor.

Supply and Fixing terminal connection plate for 10-20 HP

Supply and Fixing terminal connection plate for 30-40 HP

Supply and Fixing terminal connection plate for 50-75 HP

supply and Fixing in replacement of CI bearing plate for electric motor 10-20 HP

Supply and Fixing in replacement of CI bearing plate for electric motor 30-40 HP

Supply and Fixing in replacement of CI bearing plate for electric motor 50-75 HP

Disconnecting of electrical connections from panel board including disconnecting the cable leads from the motor terminal box and taking down/out monoblock pump set capacity upto 10 HP from foundation/base plate of pump set after opening the nuts, bolts etc and transporting the pump to workshop for repair and back, re-installed after repair including testing complete all as specified and as directed .

Openig the monoblock pump set of cap upto 10 HP and taking out the burnt winding wire complete and cleaning the slots rewinding the motor with super enamelled copper wire of existing gauge including insulating material compete all as specified and as directed. Note : "Copper winding wire of appropriate gauge will be measured under item No. 18 as supply only"

Supply only super enamelled copper winding wire of suitable gauge

Disconnecting and De-coupling the C/F pump of cap 10-20 HP from foundation after cutting of rusted MS nuts, bolts and transported to workshop for repairing and back, re-installed in existing position complete including MS nuts, bolts and packing flange compete all as specified and as directed.

Disconnecting and De-coupling the C/F pump of cap 30-40 HP from foundation after cutting of rusted MS nuts, bolts and transported to workshop for repairing and back, re-installed in existing position complete including MS nuts, bolts and packing flange compete all as specified and as directed.

Disconnecting and De-coupling the C/F pump of cap 50-75 HP from foundation after cutting of rusted MS nuts, bolts and transported to workshop for repairing and back, re-installed in existing position complete including MS nuts, bolts and packing flange compete all as specified and as directed.

Opening the centrifugal pump and repairing the same by replacing the unserviceable spare parts including machining work and re-assembling the same in original position of 10 to 20 HP Note :- Spare Part will be measured & paid spaerately

Opening the centrifugal pump and repairing the same by replacing the unserviceable spare parts including machining work and re-assembling the same in original position of 30 to 40 HP Note :- Spare Part will be measured & paid spaerately

Opening the centrifugal pump and repairing the same by replacing the unserviceable spare parts including machining work and re-assembling the same in original position of 50 to 75 HP Note :- Spare Part will be measured & paid spaerately

Supply only following spare parts for C/F Pump of capacity 10-20 HP

CI Impaller

CI Casing wear ring DE/NDE

CI Gland plate

Key for impeller

Impeller nut

Remetalling of pump shaft turning and balancing

CI Stuffing box bush

Pump shaft SS (AISI-410)

Gland packing champion

CI Bearing cartiage DE/NDE

CI Tyre coupling type TC/P/011 make unique

SS Eye bolt with nut

CI Shaft sleeve

Set Gasket packing.

MS Sluice with nut

Supply only following spare parts for centrifugal pump of capacity 30-40 HP

CI Impaller

CI Casing wear ring DE/NDE

CI Gland plate

Key for impeller

Impeller nut

Remetalling of pump shaft turning and balancing

CI Stuffing box bush

Pump shaft SS (AISI-410)

Gland packing champion

CI Bearing cartiage DE/NDE

CI Tyre coupling type TC/Q/014 make unique

SS Eye bolt with nut

CI Shaft sleeve

Set Gasket packing.

MS Sluice with nut

Supply only following spare parts for centrifugal pump of capacity 50-75 HP

CI Impaller

CI Casing wear ring DE/NDE

CI Gland plate

Key for impeller

Impeller nut

Remetalling of pump shaft turning and balancing

CI Stuffing box bush

Gland packing champion

CI Bearing cartiage DE/NDE

CI Tyre coupling type TC/P/017 make unique

SS Eye bolt with nut

CI Shaft sleeve

Set Gasket packing.

MS Sluice with nut

MS Stud with nut

MS coupling key

M&L for painting (two coat of synthetic Enamel paint) on centrifugal pump & motor of any capacity rating 10-75 HP, scratching the rusted and suction/delivery pipe line including NRV and sluice valve, MS Base chanel complete all as specified and as directed .

S&F in replacement of MS base channel of existing size including cutting welding making hole and painting (two coat of synthetic enamel paint over a coat of red oxide) complete all as specified and as directed .

S&F in replacement of MS foundation bolts with nuts and washers size 20 mm dia and 450 mm long

Supply and Fixing Ball bearing 6305

Supply and Fixing Ball bearing 6306

Supply and Fixing Ball bearing 6307

Supply and Fixing Ball bearing 6308

Supply and Fixing Ball bearing 6309

Supply and Fixing Ball bearing 6310

Supply and Fixing Ball bearing 6311

Supply and Fixing Ball bearing 6312

Supply and Fixing Ball bearing 6313

Supply and Fixing Ball bearing 6314

Supply and Fixing of double ball bearing 3307

Supply and Fixing of double ball bearing 3309

Supply and Fixing of double ball bearing 21309

Supply and fixing of Rollar bearing No-313

Supply and fixing of Rollar bearing No-314

Supply and fixing in replacement of CI Foot Valve Flanged 100 mm bore complete all as specified and as directed.

Supply and fixing in replacement of CI Foot Valve Flanged 150 mm bore complete all as specified and as directed.

Supply and fixing of CI Non return valve 100 mm bore complete all as specified and as directed.

Supply and fixing of CI Non return valve 150 mm bore complete all as specified and as directed.

Supply and fixing of CI Non return valve 200 mm bore complete all as specified and as directed.

Supply and fixing in replacement of star delta starter type ML-1.5

Supply and fixing in replacement of star delta starter type ML-2

Supply and fixing in replacement of star delta starter type ML-4

Supply and fixing in replacement of power contactor r type ML-12

Supply and fixing in replacement of power contactor r type ML-3

Supply and fixing in replacement of power contactor r type ML-2

Supply and fixing in replacement of power contactor r type ML-1.5

M&L in replacement of phase failure relay with under and over voltage relay setting (variable) Auto reset 4%-20% unbalance with nutral tail protection type DZV MR-2

M&L in replacement of panel mounting single phase preventor type VSP-II complete all as specified and as directed.

M&L PVC insulated multistranded copper conductor wire 1100 volts in replacement single core of size 4.00 Sq mm complete all as specified and as directed.

M&L PVC insulated multistranded copper conductor wire 1100 volts in replacement single core of size 6.00 Sq mm complete all as specified and as directed.

M&L PVC insulated multistranded copper conductor wire 1100 volts in replacement single core of size 10.00 Sq mm complete all as specified and as directed.

M&L PVC insulated multistranded copper conductor wire 1100 volts in replacement single core of size 16.00 Sq mm complete all as specified and as directed.

M&L PVC insulated multistranded copper conductor wire 1100 volts in replacement single core of size 25.00 Sq mm complete all as specified and as directed.

M&L PVC insulated multistranded copper conductor wire 1100 volts in replacement single core of size 70.00 Sq mm complete all as specified and as directed.

S & F in replacement of biametallic thermal over load relay 415 V 50 Hz of range 9-14 amp make L&T or equivalent in complete all as specified and as directed.

S & F in replacement of biametallic thermal over load relay 415 V 50 Hz of range 13-21 amp make L&T or equivalent in complete all as specified and as directed.

S & F in replacement of biametallic thermal over load relay 415 V 50 Hz of range 20-32 amp make L&T or equivalent in complete all as specified and as directed.

S & F in replacement of biametallic thermal over load relay 415 V 50 Hz of range 28-42 amp make L&T or equivalent in complete all as specified and as directed.

S & F in replacement of Amp Meter 0 to 100 Amp of size 96 mm x 96 mm Digital Type complete all as specified and as directed.

S & F in replacement of Volt Meter 0 to 500 Volts of size 96 x 96 mm Digital Type complete all as specified and as directed.

M/L in replacement of Indicating light.

S&F in replacement moulded case circuit breakers 3 pole 630 Amps having breaking capcity 50 KA at 415 volts type DN3-630M Cat Part No.CM94515OOTOOG

S&F in replacement moulded case circuit breakers 3 pole 400 Amps having breaking capcity 50 KA at 415 volts type DN3-400M Cat Part No.CM94516OOROOG Make L&T or equivalent in Havell's/Siemens

S&F in replacement moulded case circuit breakers 3 pole 400 Amps having breaking capcity 50 KA at 415 volts type DN3-250M Cat Part No.CM92171OOPOOG

S&F in replacement Timer ST-100 Make L&T or equivalent in Havell's/Siemens

Material and labour for plate earthing with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised earth lead 32mm x 6mm strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all surrounded by adequete quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, earth strip encased in 40 mm bore GI medium grade pipe, including providing watering pipe 20 mm bore GI pipe medium grade from bottom of the earth pit to the top of the electrode complete with earth pit in PCC 1:2:4 type B - O using 12 mm graded crushed stone aggregate, earth work and RCC cover Complete all as specified complete all as specified and as directed and shown in electrical plate number 3 of SSR part -1, incl taking down.

S&F in replacement GI Earthing strip 32x6mm including nut bolts and connecting items complete all as specified and as directed.

NOTE :- If the contractor fails to repair the motor and pump within the seven days given to him the same will be got repaired through other agency by calling spot quotation at his risk and cost. This shall be in addition to penalty as mentioned in clause 9.1 of Particular Specification. The decision of accepting officer in this regard shall be final concluding and binding on the contractor.

An amount of Rs 153834.00 shall be deducted from BOQ on account of schedule of credit

Friends fire Engineers

Ridhi engineers and builders