Name of work - Renovation and Modification of faculty lounge at 7th floor in academic area at IIT Delhi.

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1.1) 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

2) Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

3) Centering and shuttering including strutting, propping etc. and removal of form for :

3.1) Shelves (Cast in situ)

3) Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

3.1) Thermo-Mechanically Treated bars of grade Fe-500D or more.

4) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

4.1) Cement mortar 1:4 (1 cement :4 coarse sand)

5) Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

5.1) Granite of any colour and shade

5.1.1) Area of slab upto 0.50 sqm

5.1.2) Area of slab over 0.50 sqm

6) Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

6.1) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

7) Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

7.1) Twin rubber stopper

8) Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

8.1) 1.0 mm thick

9) Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.

10) Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete.

11) Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

12) Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

13) Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

14) Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.

15) Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

15.1) Double strip (horizontal type)

16) Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

17) Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

17.1) 25 mm thick

18) Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.

18.1) Size of Tile 600x600 mm

19) Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :

19.1) Black Zebra

20) Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

21) Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

21.1) Ridges plain (500 - 600mm)

22) Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm Code Description Unit Rate No. SUB HEAD : 12.0 ROOFING 221 and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :

22.1) GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.

23) 12 mm cement plaster of mix :

23.1) 1:4 (1 cement: 4 coarse sand)

24) 15 mm cement plaster on rough side of single or half brick wall of mix:

24.1) 1:4 (1 cement: 4 coarse sand)

25) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

26) Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

26.1) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

27) Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

27.1) Two coats

28) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

28.1) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

29) Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge

30) Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

30.1) In cement mortar

31) Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

32) Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :

32.1) Thickness above 10 mm up to 25 mm

33) Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

34) Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

35) Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

35.1) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

36) Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

37) Providing and fixing soil, waste and vent pipes :

37.1) 75 mm diameter :

37.1.1) Centrifugally cast (spun) iron socketed pipe as per IS: 3989

38) Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :

39) Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

39.1) 100 mm inlet and 75 mm outlet

39.1.1) Sand cast iron S&S as per IS - 3989

40) Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :

40.1) 15 mm dia nominal bore

41) Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

41.1) 50 mm dia nominal bore

42) Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

42.1) 15 mm nominal bore

43) Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

43.1) For fixed portion

43.1.1) Powder coated aluminium (minimum thickness of powder coating 50 micron)

44) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

44.1) Powder coated aluminium (minimum thickness of powder coating 50 micron)

45) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.

45.1) Pre-laminated particle board with decorative lamination on both sides

46) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

46.1) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

47) Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

47.1) With stainless steel cover plate minimum 1.25 mm thickness

48) Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

48.1) Upto 5mm depth and 5 mm width

49) Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :

49.1) (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)

50) Providing and Fixing factory made single extruded WPC (Wood Polymer Composite ) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhensive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms ) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm , modulus of elasticity 850 N/mm and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note : stainless steel piano hinges / soft close clip on concealed hinges and necessary S.S screws shall be paid seperately)

50.1) 18 mm Thick

51) Providing and fixing roller blinds, the febric should be screen openness of 5% and composition of 75% PVC 25% polyster with fabric weight of 465 GSM with fire resistance grade of NSPA 701, BS 586 part- II with anodized aluminium channel weight, bracket and hangers etc. the fabric will be approved colour and shed of approved manufacturer complete. Make (VISTA/MAC/Marvel

52) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) 3 seater Sofa as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- orlando/ equivalent of Featherlite/ equivalent of Wipro) with following specification Sofa Made of combination of plywood & solid wood, plywood thickness 12mm, moisture content-10-12%, legs PVC, Upholstry- Touch pointpure leather & non touch point Synthetic leather, pure leather thickenss- 1.2mm and synthetic leather thickness 1mm, seat foam is of slab stock foam-super soft density 32kg/m cube, back foam, is recron ( denier:15, fiber hollowness- 100%, webbing - double webbing, S- spring and nylon belt (Size- D- 1820 mm x W- 920 mm x h- 890 mm over all Ht. , 470 mm Seat Ht, 610 mm armrest ht from the floor level). (Note- In this estimate Godrej interio orlando mode in 3 seater sofa series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

52) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) 2 seater Sofa as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- orlando/ equivalent of Featherlite/ equivalent of Wipro) with following specification Sofa Made of combination of plywood & solid wood, plywood thickness 12mm, moisture content-10-12%, legs PVC, Upholstry- Touch pointpure leather & non touch point Synthetic leather, pure leather thickenss- 1.2mm and synthetic leather thickness 1mm, seat foam is of slab stock foam-super soft density 32kg/m cube, back foam, is recron ( denier:15, fiber hollowness- 100%, webbing - double webbing, S- spring and nylon belt (Size- D- 1410 mm x W- 920 mm x h- 890 mm over all Ht. , 470 mm Seat Ht, 610 mm armrest ht from the floor level). (Note :- In this estimate Godrej interio orlando mode in 2 seater sofa series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

53) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) 1 seater Sofa as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- orlando/ equivalent of Featherlite/ equivalent of Wipro) with following specification Sofa Made of combination of plywood & solid wood, plywood thickness 12mm, moisture content-10-12%, legs PVC, Upholstry- Touch pointpure leather & non touch point Synthetic leather, pure leather thickenss- 1.2mm and synthetic leather thickness 1mm, seat foam is of slab stock foam-super soft density 32kg/m cube, back foam, is recron ( denier:15, fiber hollowness- 100%, webbing - double webbing, S- spring and nylon belt (Size- D- 920 mm x W- 920 mm x h- 890 mm over all Ht. , 470 mm Seat Ht, 610 mm armrest ht from the floor level). (Note :-In this estimate Godrej interio orlando mode in 1 seater sofa series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

54) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) centre table as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- Model Flair X/ equivalent of Featherlite/ equivalent of Wipro) with following specification Top is made of MDF- 18mm thk, with cream shade, bottom shelf made of MDF-18mm thk in wenge shade, frame MS in chrome plated (Size- W- 1100 mm x D- 600 mm x H- 450 mm ). (Note :- In this estimate Godrej interio Model Flair X mode in Center Table series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

55) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) corner table as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- Flair Corner Table/ equivalent of Featherlite/ equivalent of Wipro) with following specification Top is made of MDF- 18mm thk, with cream shade, bottom shelf made of MDF-18mm thk in wenge shade, frame MS in chrome plated (Size- W- 600 mm x D- 600 mm x H- 550 mm ). (Note :- In this estimate Godrej interio Flair Corner mode in Corner Table series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

56) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) Dinning table with marble top as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- Terrene Table/ equivalent of Featherlite/ equivalent of Wipro) with following specification Material- Synthetic Marbel + Ash wood understructure, Thickness of top-36 mm, Paper Marbel (Size- W- 1600 mm x D- 900 mm x H- 775 mm ). (Note :- In this estimate Godrej interio terrene with marble top mode in Dinning table with marble top series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

57) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) Dinning chair as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- Terrene plus chair/ equivalent of Featherlite/ equivalent of Wipro) with following specification Material -Rupper Wood + PU in Beige Colour (Size- W- 435 mm x D- 515 mm x 900 overall ht. & 460 mm seat height ). (Note :- In this estimate Godrej interio terrene plus mode in Dinning chair series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

58) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) Cabinet- Floor Unit as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- Opulent cabinet- Floor Unit size - 1840 x 495 x 380/ equivalent of Featherlite/ equivalent of Wipro) with following specification Lacquered Glass top with rubber wood & MDF Body in Beige Colour top, 2 drawers in the middle and 2 shutter on each end (Size- W- 1400 mm x D- 450 mm x H-750 mm ).( Note :- In this estimate Godrej interio Opolent Cabinet- Floor Unit Size 1840 x 495 x380 mode in Opulent Cabinet series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

59) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) Book Case Unit as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- Maestro / equivalent of Featherlite/ equivalent of Wipro) with following specification Main Material-Particle Board with the density of 680 kg / m3 , Postforming in Duck­Nosed Profile,2 mm PVC Edging, Dark Cherry colour- Top Panel- 25 mm MFC, Bottom Panel-25 mm MFC, Wood Door Panels-18 mm MFC, Glass Doors - 5 mm (Size- W- 790 mm x D- 400 mm x H-2200 mm ). (Note :- In this estimate Godrej interio Maestro mode in Book case Unit series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

60) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) Crockery Unit as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- Crockery Unit / equivalent of Featherlite/ equivalent of Wipro) with following specification rockery Unit of Glass sheet on the uper half and closed in the lower half (Size- W- 900 mm x D- 330 mm x H-1980 mm ). (Note :- In this estimate Godrej interio Crockery Unit in Crockery series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

61) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

61.1) Group C

62) Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

62.1) Group C

63) Wiring for light/ power plug with 2X4 sq.mmFRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as reqd.

64) Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

65) Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required

65.1) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

65.2) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

65.3) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

65.4) 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

65.5) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

66) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

66.1) 5/6 A switch

66.2) 3 pin 5/6 A socket outlet

67) Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

68) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

68.1) 6 Module (200 mmX75 mm)

69) Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

70) Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

70.1) 125 A, 16 kA,TPMCCB

71) Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

71.1) 8 way, Double door

72) Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer MCCB) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

72.1) 8 way (4 + 24), Double door

73) Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

73.1) Single pole

74) Supplying and fixing following rating, double pole, 240 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.

75) Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

76) Providing and fixing M.S. Fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. Rate to be taken

77) S/I/T/C of 1200 mm size (5 star) of double ball bearing,copper winding, capacitor start Ceiling fan of approved make suitable for 230 volt, 50 Hz, sigle phase A.C. supply and complete with all standard accessories such as Motors, Blades & Capacitor, fan box cover i/c wiring the down rod with 1.5 sq.mm FRLS copper conductor wires from the point outlet etc complete as required.

78) S/I/T/C of 15"(380mm) size,1400rpm,copper wound, heavy duty metalic Exhaust Fan of double ball bearing capacitor start,suitable for 230 volt,50 Hz,single phase A.C. supply and complete with accessories such as motor, legs,frame,loober and Nut & bolts etc complete as required

79) S/I/T/C of Recess/ Surface mounting LED luminaire equipped with CRCA powder coating housing, anti glare polycarbonate diffuser with energy efficient electronic driver with following features:- Suitable for operating voltage and frequency: 130-300 Va.c, 50 Hz.; wattage not more than 34 Watts;Output lumens not less than 3300 lm; CCT 6500K; Dimension in mm (595X595X70); Nominal surge protection 2.5 kV;Power factor not less than 0.9; Minimum IP protection 20; (installation with 2 No chain & hook) etc as required

80) S/I/T/C of 18 watt LED batten with its coextrusion polycarbonate construction & Integrated electric driver IP20 protection, 6500k suitable for operating voltage and frequency : 130-300Vac,50Hz, wattage not more than 18 watt and lumen not less than 1800 lm etc as required.

81) S/I/T/C of 8 watt LED Bulk Head light with its coextrusion polycarbonate construction & Integrated electric driver IP20 protection, 6500k suitable for operating voltage and frequency : 130-300Vac,50Hz, wattage not more than 8 watt and lumen not less than 800 lm etc as required.

82) S/I/T/C of 400 mm size of double ball bearing,copper winding, capacitor start wall fan of approved make suitable for 230 volt, 50 Hz, sigle phase A.C. supply and complete with all standard accessories such as Motors, Blades & Capacitor, fan box cover i/c wiring the down rod with 1.5 sq.mm FRLS copper conductor wires from the point outlet etc complete as required.

MODERN CONCEPT CONSTRUCTIONS

R.K. ELECTRICALS & INTERIORS