Construction of Backward Class welfare Department post metric boys hostel at Degree college premises in Jewargi Town, Jewargi taluka under KKRDB Micro for the year 2022-23 General (SDP) (KLB 221023348)

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Providing and injecting chemical emulsion for Pre-constructional

Anti-Termite Treatment, creating continuous chemical barrier under

and around the column pits, walls, trenches, basement excavation, to...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations and other similar works etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by r...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Foundation upto Plinth Isolated add 8%

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) add 70%

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Plinth Beams of Buildings add 50%

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) add 70%

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Staircase and other similar structures add 50%

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for

RCC Beams, Lintels & Troughs of Aqueducts add 60%

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for

RCC Roof Slabs add 50%

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for

Chejjas, Canopy & Other Architectural projections of

minor sections add 45%

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of

class designation 3.5 in superstructure above plinth level in all shapes and

sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular

bricks of class designation 3.5 in superstructure above plinth level up

to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

Providing Salwood frames of doors, windows, clerestory windows,

ventilators and other frames, wrought, framed or assembled including

making plaster groves (excluding cost of cement concrete and side c...

Fixing of door frame in an existing opening including embedding frame in

floor and walls after cutting masonry for holdfasts for embedding holdfast

in cement concrete 1:3:6 of 20mm and down size grani...

Providing & fixing of louvered ventilator made out of multi chambered

UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium

Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi

chambered UPVC(Matching to RAL-9016) sections and with minimum

TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to steel...

Providing and fixing suitable plaster mesh 100mm wide manufactured

out of hot dipped galvanised iron of nominal thickness 0.35mm with a

zinc coating of 120g/m2 width, along route of walls chipped for ...

Providing 15 mm cement plaster on rough side of single or half brick

wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off corne...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off corners wherever

required smooth rendering, providing and removing scaffolding, in...

Providing 15 mm cement plaster on rough side of single or half brick

wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off corne...

Providing Neat cement punning to brick masonry including rounding

off corners wherever required smooth rendering, providing and removing

scaffolding, including cost of materials, labour, curing comple...

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/window/Clerestory windows & other Frames/

Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant,

high water absorbant single extruded WPC (Wood PolymerComposite) solid

plain flush door shutter of required size comprisi...

Providing and fixing oxidised M.S. double acting spring hinges with necessary

screws etc. complete. 125mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992

with necessary screws etc. complete : 125mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel

type) with necessary screws etc. complete :

Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered

wall surface to prepare the surface even and smooth complete as per

Finishing walls with 100% Premium acrylic emulsion paint having VOC

less than 50 g/L and UV resistance as per IS 15489:2004, Alkali

& fungal resistance, dirt resistance exterior paint of required shad...

Applying priming coat: With ready mixed pink or Grey primer of

approved brand and manufacture on wood work (hard and soft wood)

including preparing the surface after thorougly cleaning oil, grease, di...

Painting wood work with Deluxe Multi Surface Paint of required shade.

Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e...

Painting Steel work with Deluxe Multi Surface Paint to give an even

shade. Two coat applied @ 0.90L/10 m² over an under coat of primer

applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Providing flooring with 25mm thick polished Cuddapah slabs using cement

mortar 1:6, 25mm thick over existing cement concrete bed or top of roof

laid to line and level and jointed with cement slurry mi...

Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 m...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality conforming

to IS : 15622 of approved make in colours such as White, Iv...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitt...

Forming groove of uniform size in the top layer of plaster as per approved

pattern including repair to the edges of panels and finishing the groove

complete as per specifications and direction of the ...

Providing and fixing of wall cladding using 20mm thick gang saw water

cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand)

proportion cut to required shape, pattern with paper joi...

Providing and fixing 18 mm thick gang saw cut granite of any color and

shade, mirror polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias and ...

Extra for fixing granite stone, over and above corresponding basic item,

in facia and drops of width upto 150 mm with epoxy resin based

adhesive, including cleaning etc. complete.

Providing edge moulding to 18mm thick Granite stone counters, vanities etc

including machine polishing to edge to give high gloss finish etc. complete

as per design approved by Engineer-in-charge.

Extra for providing opening of required size & shape for wash basin/

kitchen sink in kitchen platform, vanity counter and similar location in

Granite, including necessary holes for pillar taps etc. in...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer), of approved make,

in all colours, shades except burgundy, bottle gre...

Finishing walls with Acrylic Smooth exterior paint of required shade :New

work (Two coat applied @ 1.67L/10 m² over and including priming coat of

exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing and fixing flush door shutter made out of solid core block board

type, well seasoned , chemicaly treated hard wood battens and internal

frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and

diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates

at the junctions and corners, 25 mm dia pulley, 40x40x6 mm...

Providing and laying 60mm thick factory made cement concrete paver

block of approved shape and colour of M -30 grade made of C&D waste

by block making machine with vibratory compaction laid in require...

Providing and laying vitrified floor tiles with thickness 9-10 mm in

different sizes with water absorption less than 0.08% and conforming to

IS: 15622, of approved make, in all colours and shades, lai...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved

make and colour using acid and/or alkali resisting mortar bedding

for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) add 70%

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Staircase and other similar structures add 50%

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for

RCC Beams, Lintels & Troughs of Aqueducts add 60%

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for

RCC Roof Slabs add 50%

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for

Chejjas, Canopy & Other Architectural projections of

minor sections add 45%

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of

class designation 3.5 in superstructure above plinth level in all shapes and

sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular

bricks of class designation 3.5 in superstructure above plinth level up

to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

Providing Salwood frames of doors, windows, clerestory windows,

ventilators and other frames, wrought, framed or assembled including

making plaster groves (excluding cost of cement concrete and side c...

Fixing of door frame in an existing opening including embedding frame in

floor and walls after cutting masonry for holdfasts for embedding holdfast

in cement concrete 1:3:6 of 20mm and down size grani...

Providing & fixing of louvered ventilator made out of multi chambered

UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium

Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi

chambered UPVC(Matching to RAL-9016) sections and with minimum

TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to steel...

Providing and fixing suitable plaster mesh 100mm wide manufactured

out of hot dipped galvanised iron of nominal thickness 0.35mm with a

zinc coating of 120g/m2 width, along route of walls chipped for ...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off corners wherever

required smooth rendering, providing and removing scaffolding, in...

Providing 15 mm cement plaster on rough side of single or half brick

wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off corne...

Providing Neat cement punning to brick masonry including rounding

off corners wherever required smooth rendering, providing and removing

scaffolding, including cost of materials, labour, curing comple...

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/window/Clerestory windows & other Frames/

Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant,

high water absorbant single extruded WPC (Wood PolymerComposite) solid

plain flush door shutter of required size comprisi...

Providing and fixing oxidised M.S. double acting spring hinges with necessary

screws etc. complete. 125mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992

with necessary screws etc. complete : 125mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel

type) with necessary screws etc. complete :

Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered

wall surface to prepare the surface even and smooth complete as per

Finishing walls with 100% Premium acrylic emulsion paint having VOC

less than 50 g/L and UV resistance as per IS 15489:2004, Alkali

& fungal resistance, dirt resistance exterior paint of required shad...

Applying priming coat: With ready mixed pink or Grey primer of

approved brand and manufacture on wood work (hard and soft wood)

including preparing the surface after thorougly cleaning oil, grease, di...

Painting wood work with Deluxe Multi Surface Paint of required shade.

Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e...

Painting Steel work with Deluxe Multi Surface Paint to give an even

shade. Two coat applied @ 0.90L/10 m² over an under coat of primer

applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Providing flooring with 25mm thick polished Cuddapah slabs using cement

mortar 1:6, 25mm thick over existing cement concrete bed or top of roof

laid to line and level and jointed with cement slurry mi...

Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 m...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality conforming

to IS : 15622 of approved make in colours such as White, Iv...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitt...

Forming groove of uniform size in the top layer of plaster as per approved

pattern including repair to the edges of panels and finishing the groove

complete as per specifications and direction of the ...

Providing and fixing 18 mm thick gang saw cut granite of any color and

shade, mirror polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias and ...

Extra for fixing granite stone, over and above corresponding basic item,

in facia and drops of width upto 150 mm with epoxy resin based

adhesive, including cleaning etc. complete.

Providing edge moulding to 18mm thick Granite stone counters, vanities etc

including machine polishing to edge to give high gloss finish etc. complete

as per design approved by Engineer-in-charge.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer), of approved make,

in all colours, shades except burgundy, bottle gre...

Finishing walls with Acrylic Smooth exterior paint of required shade :New

work (Two coat applied @ 1.67L/10 m² over and including priming coat of

exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing and fixing flush door shutter made out of solid core block board

type, well seasoned , chemicaly treated hard wood battens and internal

frame with minimum 45 mm wide wooden frame alround doo...

Newly Constructed Bathroom/toilet/balcony/utility with

Cementatius Waterproof coating - Below 300 m2 Providing and Applying CFTRI approved two component flexible polymer

modified acrylic cementitious ...

Providing and laying vitrified floor tiles with thickness 9-10 mm in

different sizes with water absorption less than 0.08% and conforming to

IS: 15622, of approved make, in all colours and shades, lai...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved

make and colour using acid and/or alkali resisting mortar bedding

for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) add 70%

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts add 60%

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slabs add 50%

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off corners wherever

required smooth rendering, providing and removing scaffolding, in...

Providing 15 mm cement plaster on rough side of single or half brick

wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off corne...

Providing Neat cement punning to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing comple...

Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete.125mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and fixing flush door shutter made out of solid core block board

type, well seasoned , chemicaly treated hard wood battens and internal

frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,

fixing in position and applying a priming coat of approv...

Providing and fixing 6mm Clear/opal white/solar bronze/blue/green

tinted Multi wall poly carbonate sheet for Tubular structure. The work

including cost of all materials, labour charges and usage charg...

Providing and laying water proofing treatment to the Roof with PU based

single component elastomeric pure polyurethane based coating on New

terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Installation of Bore Well

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 nd latest ammendments, electrical resistance welded steel tubes, te...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.

Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets.

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50 mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Labour charges for Erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc., compl...

Providing main connection from pole - PVC insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. 3.5 x 6 sqmm

Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark

SUMP TANK - 18000 Ltr

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations and other similar works etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by r...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Foundation upto Plinth Isolated add 8%

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Earth retaining structures add 10%

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Roof Slab add 50%

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing 15 mm cement plaster on the rough side of single or half brick

wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners

wherever required smooth rendering, providing and remov...

Extra for providing and mixing water proofing material in cement plaster

work in proportion recommended by the manufacturers including cost of

material etc as per specifications and as per directions ...

Water Supply & Sanitary Works

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing PTMT bib cock of approved quality and colour.

15mm nominal bore, 86 mm long, weighing not less than 88 g

Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore, 107 mm long, weighing not less than 110 g

Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98 mm long, weighing not less than 75 g

Providing and fixing PTMT grating of approved quality and colour.

100 mm nominal dia.

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

Construction of Septic Tank

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations and other similar works etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by r...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Foundation upto Plinth Isolated add 8%

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Earth retaining structures add 10%

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Roof Slab add 50%

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing 15 mm cement plaster on the rough side of single or half brick

wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners

wherever required smooth rendering, providing and remov...

Extra for providing and mixing water proofing material in cement plaster

work in proportion recommended by the manufacturers including cost of

material etc as per specifications and as per directions ...

Internal Electrical Works

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator.

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch

Supplyin and Fixing Metal Fan Box with Round Hook.

Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The c...

Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The c...

Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The c...

Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by braci...

Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by braci...

Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by braci...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm

Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 40mm dia

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 50 sqmm Long Barrel

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip 25x6mm Copper strip

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip 600x600x3mm Copper plate

Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60H...

Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIgreater than 70%. efficacy greater than80 lumen per watt, lifegreater th...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...

Supplying & Fixing of 70-150 Watts lamp holder 2 Pin

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...

Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M...

Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.

MAIN LT PANEL Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cov...

Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are...

Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x75x...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with I...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C

Supplying, fixing and wiring 50/5 to 400/5Amps 15VA burden Current Transformer. Class 0.5 accuracy with Tape Wound

Supplying and fixing of Shunt trip suitable for MCCB.CBCT

Supplying,fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying, erecting, testing &commissioning of OFF-LINEUPS

systemsuitable for operation on 230V,50Hz,A/Csupply,withall

accessories complete and Excluding batteries and wiring complete. 5 kVA OFF LIN...

Supplying, installation, testing & commissioning of 12V .AH

batteries in poly propylene container for D.G. sets. Low maintenance

batteries, plate type. 150 AH capacity

Smart Surveillance System (CCTV) using PTZ &

Fixed cameras, OFC monitoring system, HMI

etc., as per specification

PTZ Camera Specification

Lens type Auto focus with Optical Zoom of

30x, Digital Z...

External Electrical works

RCC dp structure using 9mtr rcc pole with WL145kg

11KV 45KN Polymeric insulators

Guy Set Complete with No. 15 Strain Insulator & Concreting materials

Spiral earth electrodes

Caution/danger board

Anticlimbing device(12mts/1kg GI barbed wire)

11KV 400amps D/B GOS

H frame for mounting gos

11 KV Lightning arrestors metal oxide 9kv 5kvA

DOLO cutout(set/3Nos)

RCC dp structure using 9mtr rcc pole with WL145kg

Guyset complete

Spiral earth electrodes

Guy concreting with Boulders, Mud and Sand

Caution/danger board

Anticlimbing device(12mts/1kg GI barbed wire)

11KV 400amps D/B GOS

H frame for mounting gos

11 KV Lightning arrestors metal oxide 9kv 5kvA

DOLO cutout(set/3Nos)

Concreting for 9mt rcc pole Base concreting in cc 1:4:8 500x650x150m

pole concreting in cc1:2:4 650x500x1700mm

coping in cc 1:2:4 as per actuals

RCC pole 9mt Long with WL145kg

11kv Horizontal Cross Arm with clamps, HTST

supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL

11KV-5KN Polyclinic pin insulator(24mm dia FRP Rod)

11KV 45KN Polyclinic insulators

Guy Set Complete with No. 15 Strain Insulator & Concreting materials

Rabbit ACSR conductor at 1.5% sag

PG clamps for rabbit to rabbit conductors

Spiral earth electrodes

GI strips with GI wire laying (set/2Nos)

Caution /danger board

Anti climbing device (10mts/kg GI barbed wire)

Road cross Guardings with 4pin cross arms,Bolts&units

Painting of 9m RCC poles with material and labour

Special 3pin cross arms with clamps braces bolt nuts and washers

Erection of RCC pole 9mt Long with WL145kg

Fixing of 11kv Horizontal Cross Arm with clamps, HTST

supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL

Fixing of Guy Set Complete with No. 15 Strain Insulator & Concreting materials

Fixing of Rabbit ACSR conductor at 1.5% sag

Fixing of Spiral earth electrodes

Fixing of GI strips with GI wire laying (set/2Nos)

Concreting materials for guysets without cement

Fixing of Caution /danger board

Fixing of Anti climbing device (10mts/kg GI barbed wire)

Fixing of Road cross Guardings with 4pin cross arms,Bolts&units

Fixing of Special 3pin cross arms with clamps braces bolt nuts and washers

Concreting for 9mt rcc pole a) base concrete 1:4:8 500x650x150mm

b) Pole concrete 1:2:4 650x500x1700mm

c) Coping with CC 1:2:4

9mts RCC DP Transformer structure using 9mtrs RCC poles

11KV-5KN Polyclinic pin insulator(24mm dia FRP Rod)

11KV 45KN Polyclinic insulators

Fixing of Guy Set Complete with No. 15 Strain Insulator & Concreting materials

11KV/433V,63KVA,3 phase,50 cycles Distribution Transformer BEE-5star Rated with oil.

Earthing materials pipe type for grounding

Caution /danger board

Anti climbing device (10mts/kg GI barbed wire)

Concreting materials for guysets without cement

Gey wire 7/10 SWGG

11 KV Lightning arrestors metal oxide 9kv 5kvA

LT Distribution Base for 100KVA with MCCB

LT wiring kit (from DTC to LT line through metering box and LT Distribution Board.

LT metering Box with CT's and necessary wiring for housing ETV meter

L.T Electronic Tri-vector meter5 , class0.5/1.0 accuracy.

11KV solid core type H.G fuse (set/3nos)

11KV 200Amps Single break GOS

H frame for mounting GOS

9mts RCC DP Transformer structure using 9mtrs RCC poles

Fixing of Guy Set Complete with No. 15 Strain Insulator & Concreting materials

11KV/433V,63KVA,3 phase,50 cycles Distribution Transformer BEE-5star Rated with oil.

Earthing materials pipe type for grounding

Caution /danger board

Anti climbing device (10mts/kg GI barbed wire)

11 KV Lightning arrestors metal oxide 9kv 5kvA

LT wiring kit (from DTC to LT line through metering box and LT Distribution Board.

LT metering Box with CT's and necessary wiring for housing ETV meter

L.T Electronic Tri-vector meter5 , class0.5/1.0 accuracy.

11KV solid core type H.G fuse (set/3nos)

11KV 200Amps Single break GOS

H frame for mounting GOS

Concreting for 9mt rcc pole a) base concrete 1:4:8 500x650x150mm

b) Pole concrete 1:2:4 650x500x1700mm

c) Coping with CC 1:2:4

11kv class 3cx95sqmmxLPE ug cable (2run)

Cable termination kit outdoor HS type suitable for above cable

Cable termination kit Indoor HS type suitable for above cable

Cable covering tiles 250x125x40mm

Rcc hume pipes 2000mm long 150mm dia

Collars for rcc hume pipes

GI pipe 100mm dia for cable raising drain crossing

Route and joint indicating stones

11kv class 3cx95sqmmxLPE ug cable (2run)

Cable termination kit outdoor HS type suitable for above cable

Cable termination kit Indoor HS type suitable for above cable

Rcc hume pipes 2000mm long 150mm dia

GI pipe 100mm dia for cable raising drain crossing

Route and joint indicating stones

Cable trench excavation 1000x0.6x1mt in ordinary soil

Refilling and consolidation

Covering the cable with tiles

Spreading sand and forming with sand around the cable

Providing chain lin fencing 50mm size of 8gauge properly stretched between rectangular pole and fixed with suitable bolts and nuts the free end shall be welded to the pole and block pipe at top and bo...

Add 10 Percent Supervision Charges

Add 1 Percent Electrical Inspectorate Charges

Add 10 Percent Deposit

Installation of Solar Water Heater

Supplying, installation, testing and commissioning of solar hot water heater comprising of high quality Evacuated Glass Tube (EGT) with absorber coating collector of size 58 x 1800 mm. Inner tank Mate...