COMPREHENSIVE REPAIRS/REPLACEMENT TO INTERNAL ELECTRIFICATION SYSTEM INCL ATTENDING DAY TO DAY MAINTENANCE AND CEILING FANS, GEYSERS, EXHAUST FANS, DBS, LIGHTENING PROTECTION SYSTEM, EARTHINGS, BUILDING LIGHTS AND OTHER ALLIED WORKS OF OTM ACCNS AT I

Amount

M&L for taking down carefully existing aluminium point wiring (light, fan, socket or power) complete fittings fixture such as switches Ceiling roses, pendents,regulators, sockets etc to be measured separately)unscrewing from Board/outlet boxes, fittings & fixtures such as switches, sockets, ceiling rose lamp holder tube/ceiling fitting, bulk head fittings, tube lights & regulator etc and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

M&L for taking down carefully existing old unserviceable DBs and making good disturbed surfaces of walls to match the existing surfaces complete all as specified and as directed

M&L for taking down old unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified and as directed.

M&L for point wiring (modular type) with two run of PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm (FRLSH), PVC conduit medium grade/ PVC casing caping and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc) and drawing one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor cable (FRLSH) as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and as directed by Engr-in-Charge. (In ceiling Portion surface conduit wiring shall be carried out.) Note: The quoted rate inclusive for the following :- (a) GI metal flush box and Modular cover plate with frame of any module complete. (b) Proper colour coding is to be followed as per IS Specification. (c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cost for cutting chases/making good disturbed surfaces of wall for fixing concealed conduit shall be deemed to be included in the quoted rate.

One light point controlled by one one way switch.

One fan point controlled by one one way switch.

One 3 pin socket outlet 5/6 Amps independent.

One 3 pin socket outlet 5 Amps on the same board with other switches

One bell/ buzzer point controlled by one push button

All as per item No 4 above but cable with 4.0 sqmm size for socket outlet 15 amps, independent.

M & L for submain wiring with four single core PVC insulated unsheathed multistranded copper conductor cable of size 10 sqmm (FRLSH) and two single core PVC insulated unsheathed multistranded copper conductor cable green colour of size 10 Sqmm (FRLSH) as earth lead in and including concealed with PVC conduit medium grade of suitable size or surface wiring with PVC casing caping of suitable size and making good the disturbed wall surfaces to match with existing specification including takind down unserviceable submain wiring complete all as specified and as directed. Note : (i) Five run of cable with one run of PVC conduit/PVC casing and caping will be measured as one length. (ii) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement. (iii) Cost for cutting chases/making good disturbed surfaces of wall for fixing concealed conduit shall be deemed to be included in the quoted rate.

All as per item No. 6 here-in-before but with 6.0 sqmm cable complete all as specified and as directed.

M & L for submain wiring with two single core PVC insulated unsheathed multistranded copper conductor cable of size 6 sqmm (FRLSH) and one single core PVC insulated unsheathed multistranded copper conductor cable green colour of size 6 Sqmm (FRLSH) as earth lead in and including concealed with PVC conduit medium grade of suitable size or surface wiring with PVC casing caping of suitable size and making good the disturbed wall surfaces to match with existing specification including takind down unserviceable submain wiring complete all as specified and as directed. Note : (i) Three run of cable with one run of PVC conduit/PVC casing and caping will be measured as one length. (ii) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement. (iii) Cost for cutting chases/making good disturbed surfaces of wall for fixing concealed conduit shall be deemed to be included in the quoted rate.

All as per item No. 8 here-in-before but with 4.0 sqmm cable complete all as specified and as directed.

All as per item No. 8 here-in-before but with 2.5 sqmm cable complete all as specified and as directed.

All as per item No. 8 here-in-before but with 1.5 sqmm cable complete all as specified and as directed.

S&F ceiling Rose, 3 terminal polycarbonate isolated body complete all as specified and as directed.

S&F modular switch one way 6 Amps, 1 module complete all as specified and as directed

S&F modular switch one way 16 Amps, 1 module complete all as specified and as directed.

S&F modular bell push 6 Amps, 1 module complete all as specified and as directed.

S&F modular socket, 2/3 pin 6 amps, 2 module complete all as specified and as directed.

S&F modular socket, 2/3 pin 6/16 amps, 2 module complete all as specified and as directed.

S&F as in repair LED lights fitting 20W, >120lm/watt, CCT value 4000K to 6500K, surge protection of 2 KV, 4 feet 220V, AC IP-20, aluminium housing with inbuilt driver including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F as in repair LED lights fitting 20W, 100lm/watt, CCT value 3000K, surge protection of 2 KV, 4 feet 220V, AC aluminium housing with inbuilt driver including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F as in repair LED 20W inverter batten type fitting 3/4 feet long aluminium extruded housing, charging time 10-12 Hrs with 04 Hrs backup,IP-20 ,rated voltage 230 V, 50 Hz, system wattage 20W +/- 10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency 100lm/watt,CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F as in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 120lm/watt, CCT value 4000K to 6500K, 220 V AC aluminium housing with inbuilt driver including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F as in repair round LED surface/recess downlighter 15 watt, warm white 220V, 1200lm, CCT value 4000K-6500K complete all as specified and as directed.

Supply and fixing as in repair Bed side light LED 3 Watt, 75 lm, CCT value 3000K metal body complete all as specified and as directed,

S&F as in repair LED Picture light 12W, IP 20, CCT value 3000K complete all as specified and as directed.

Supply & fixing as in repair LED luminaire round shape 12 watt, 220V AC, 100 lm/watt, 6500K, recess/surface type with high efficiency PMMA diffuser soft glare free light complere with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply & fixing as in repair LED luminaire round shape 3 watt, 220V AC, 100 lm/watt, 6500K, IP 65 recess/surface type with high efficiency PMMA diffuser soft glare free light complere with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply & fixing as in repair LED luminaire 600mm X 600mm, 36 watt, 220V AC, 3600 lm, 6500K, recessed type with high efficiency PMMA diffuser soft glare free light complere with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fixing LED light fitting 16Watt flame proof, CMRI certified recommended for gas/vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc., complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fixing LED light fitting 2x16Watt flame proof, CMRI certified recommended for gas/vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc., complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fixing as in repair switch flame proof rotary type with termination box in LM6, 16A single pole 250V complete all as specified and as directed.

Supply and fixing exhaust fan of size 380mm, flame proof, 1440 RPM, 2350 CFM, 230V, CIMFR certified recommended for gas/vapour group of IIA, IIB & IIC, Zone 1 & 2 and IP 65 protection with aluminium blade with MOC-cast iron motor including louvre complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

S&F as in repair LED bulb 9 watt, warm white B22 complete all as specified and as directed

Supply and fixing as in repair LED inverter bulb 12 Watt, CDL, 220V AC complete all as specified and as directed.

S&F as in repair lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F as in repair Bell, Ding Dong AC, 230 Volts omplete all as specified and as directed

Supply and fixing as in repair MCCB DB VTPN 4 way IP-54, IK-09 made of sheet steel phos phatised, powder painted with suitable rated bus bar as per OEM design, neutral link, earth bar and Din rail 415 Volts with double door, suitable for MCCB 4 Pole 100-160 Amps as incomer and MCB Single Pole as outgoing complete all as specified and as directed.

Supply & fixing in replacement sheet metal enclosure with TPN MCB DB's 4 way (grouted in walls) double door type IP-54, IK-09 Protection. Isolated Neutral, Door earthing, with suitable rated bus bar as per OEM design including suitable size of copper ferrules for fixing of cable complete all as specified and as directed.

Supply & fixing as in repair MCB DB's SPN 4 way, IP-54, IK-09 double door, sheet metal enclosure, 240V, with suitable rated bus bar as per OEM design including suitable size of copper ferrules for fixing of cable complete all as specified and as directed.

Supply & fixing as in repair MCB DB's SPN 8 way, IP-54, IK-09 double door, sheet metal enclosure, 240V, with suitable rated bus bar as per OEM design including suitable size of copper ferrules for fixing of cable complete all as specified and as directed. Note for item srl No 36 to 39 : (i) MCCB and MCB will be measured and paid separately. (ii) The cost for flushing of Distribution box in any type of wall and making good disturbed surfaces with existing colour shall be deemed to be included in the quoted rate

Supply & fixing as in repair Single pole and neutral enclosure with a two pin and earth plug and socket suitable for RCBO 2 pole, 25 to 40 amps rated complete all as specified and as directed. Note : RCBO will be measured and paid separately.

Supply & fixing as in repair MCCB 100-160 Amps, thermal adjustable, 16 KA , ICS = 100% ICU, AC 415 Volts, four pole including providing aluminium lugs for incoming and out going cables complete all as specified and as directed.

S&F as in repair MCB TPN 40 to 63 Amp, C series, 415V, 10 KA complete all as specified and as directed.

S&F RCBO 25-40 Amps, double pole 240V, AC type, 30 mA complete all as specified and as directed.

S&F as in repair MCB SP 6-32 Amps ,10 KA, B Curve, 230 Volts ,50 HZ complete all as specified and as directed.

S&F as in repair Surge Protection Device, breaking capacity 40KA/Pole, 4 Pole with sheet metal enclosure complete all as specified and as directed.

M&L for carrying out internal wiring test with all T&P such as megger, clamp meter/multi meter etc., by opening of main DBs/TPN DBs/SPN DBs disconnecting of phase and neutral cable connection, fittings, fixtures carrying out testing for insulation values, reconnecting the disconnected cable connections, fittings and fixtures including replacement of defective copper ferrules, insulation peeled off wires with insulation tape complete all as specified and as directed. Note : (i) The cost of copper ferrules and insulation tape shall be deemed to be included in the quoted rate. (i). The inspection shall be carried out in presence of JE E/M, I/C Elect(HS)/MCM detailed by JE E/M with user's signature. (ii) Each room will be measured as one job.

Repair, maint and making the continuity of supply after rectifying the defects of the electrical items such as switches, sockets, bell push, ceiling roses, metal/PVC flush boxes, modular cover plate with frame and other similar electrical items/fittings etc. including providioning of small pieces of electrical wire if required of size 1.5 sqmm to 2.5 sqmm single core and length not exceding 0.50 mtrs complete all as specified and directed by Engineer-in-Charge. (Note :- (i) any accessories found unserviceable that shall be paid as supply only under respective items of this Sch 'A' . (ii) One job only will be considered for each bldg/Qtr per day irrespective of the No of points made serviceable.(iii) The area for attending the complaints are Minnie Bay area (iii) Each complaint attended/rectified shall be measured as one job. (iv) The contractor shall depute necessary man power on daily basis for rectifying the jobs including sundays and holidays.

Supply only switch piano, flush type, single pole, one way 6 Amp for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only bell push, flush type 5/6 amps for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only switch socket combination 2 in 1, 6 Amp flush type for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only ceiling Rose, 3 terminal polycarbonate isolated body for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only modular switch one way, 6 Amps, 1 module for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only modular switch one way, 16 Amps, 1 module for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only modular socket, 2/3 pin, 6 amps, 2 module for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only modular socket, 2/3 pin, 6/16 amps, 2 module for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only modular metal/PVC flush box 3 module for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only modular metal/PVC flush box 6 module for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only modular white cover plate with frame 3 module for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only modular white cover plate with frame 6 module for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only modular fan regulator 120W for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only fan regulator flush type for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only metal clad plug 20 Amp 3 pin for carrying out repairs under relevant Sch 'A' item No. 47 complete all as specified and as directed

Supply only LED Driver 36/40 Watt, AC 220-240V, 50HZ suitable for LED ceiling light 40W for carrying out repairs under relevant Sch 'A' item No. 64 complete all as specified and as directed

Supply only LED Driver 12/15 Watt, AC 220-240V, 50HZ suitable for LED ceiling light 12/15W for carrying out repairs under relevant Sch 'A' item No. 64 complete all as specified and as directed

M&L for taking down ceiling fan of any sweep, sealing cable end, dismantling blades, painting of ceiling fans complete with white synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc., including fixing at the same position and provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

M&L for taking down ceiling fan of any size/make for repairing and fixing of ceiling fan at same place after repairing including provision of cable from ceiling rose or connector to fan complete all as specified and as directed. Note : The items required for repair shall be measured and paid separately.

Supply only Ball Bearing No. 6201 for carrying out repairs under relevant Sch 'A' item No. 67 complete all as specified and as directed

Supply only Ball Bearing 6202 for carrying out repairs under relevant Sch 'A' item No. 67 complete all as specified and as directed

Supply only MS Shaft for carrying out repairs under relevant Sch 'A' item No. 67 complete all as specified and as directed

Supply only Canopy (Top & Bottom) for carrying out repairs under relevant Sch 'A' item No. 67 complete all as specified and as directed

Supply only Blade of size 1200 mm for carrying out repairs under relevant Sch 'A' item No. 67 complete all as specified and as directed

Supply only heavy duty steel rubber ceiling fan clamp with nut bolt and locking pins complete for carrying out repairs under relevant Sch 'A' item No. 67 complete all as specified and as directed

Supply and fixing as in repair Capacitor 2.5 Mfd complete all as specified and as directed.

S&F as in repair PCB suitable for BLDC ceiling fan of any make/model as per OEM design complete all as specified and as directed.

Supply & fixing as in repair ceiling fan 1200mm sweep with blades, suitable BLDC remote electronic regulator as per OEM design, down rods and connected accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM, 5 star rated, equipped with brushless direct current motor (BLDC) of wattage < 28W including provision of cable from ceiling rose/connector to fan including taking down old unserviceable ceiling fan and deposited to MES store yard complete all as specified and as directed.

Supply and fixing ceiling fan of size 1200mm, flame proof, 280 RPM, 205 CMM, 230V, CIMFR certified recommended for gas/vapour group of IIA, IIB & IIC, Zone 1 & 2 and IP 65 protection with aluminium blade with MOC-cast iron motor including louvre complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

M&L for taking down exhaust fan of any size/make for repairing and fixing of exhaust fan at same place after repairing including provision of cable from ceiling rose or connector to fan complete all as specified and as directed. Note : The items required for repair shall be measured and paid separately under relevant items

Supply only Bush copper suitable for exhaust fan 300/450 mm for carrying out repairs under relevant Sch 'A' item No. 78 complete all as specified and as directed

Supply only MS Shaft suitable for 300 mm sweep exhaust fan for carrying out repairs under relevant Sch 'A' item No. 78 complete all as specified and as directed

Supply only Exhaust fan blade of size 300mm for carrying out repairs under relevant Sch 'A' item No. 78 complete all as specified and as directed

S&F as in repair exaust fan louver aluminium suitable for hole size 300mm fixing up to 3rd floor complete all as specified and as directed. Note : Necessary scaffolding for fixing of louvre shall be deemed to be included in the quoted rate

S&F as in repair fresh air exhaust fan of size 200 mm, 230V, RPM 1400, PVC body including taking down old unserviceable exhaust fan and deposited to MES store yard complete all as specified and as directed.

S&F as in repair fresh air exhaust fan of size 250 mm, 230V, RPM 1400, PVC body including taking down old unserviceable exhaust fan and deposited to MES store yard complete all as specified and as directed.

S&F as in repair metallic exhaust fan of size 300 mm, 230V, RPM 1400, metal body including taking down old unserviceable exhaust fan and deposited to MES store yard complete all as specified and as directed.

S&F as in repair Wall fan of size 400mm sweep with blades, mounting accessories kit, blade guard set, guard ring, AC 230V including taking down old unserviceable wall fan and deposited to MES store yard complete all as specified and as directed.

M&L for taking down and dismantling of geyser of any size/make for repairing and fixing of geyser at same place after repairing including making good disturbed surfaces complete all as specified and as directed. Note : The items required for repair shall be measured and paid separately under relevant items

Supply only thermostat suitable for geyser 25 ltrs capacity for carrying out repairs under relevant Sch 'A' item No. 87 complete all as specified and as directed

Supply only Heating element 2 KW suitable for existing make/model of geyser for carrying out repairs under relevant Sch 'A' item No. 87 complete all as specified and as directed

Supply only indicating lamp (Red/Green) for carrying out repairs under relevant Sch 'A' item No. 87 complete all as specified and as directed

Supply only Geyser pressure safety relief valve for carrying out repairs under relevant Sch 'A' item No. 87 complete all as specified and as directed

Supply and fixing as in repair Stainless steel geyser connection pipe for hot/cold water 450mm long with brass end nuts suitable for 15mm dia GI tubing complete all as specified and as directed

S&F as in repair metallic Air circulator 450mm, RPM 1440 including provision of cable from ceiling rose/connector to fan including taking down old unserviceable air circulator and deposited to MES store yard complete all as specified and as directed.

S&F as in repair metallic pedestal fan 450mm, RPM 2500 ncluding taking down old unserviceable pedestal fan and deposited to MES store yard complete all as specified and as directed.

S&F as in repair metallic Air circulator 600mm, RPM 1440 including provision of cable from ceiling rose/connector to fan including taking down old unserviceable air circulator and deposited to MES store yard complete all as specified and as directed.

S&F as in repair heavy duty exhaust fan of size 450 mm, RPM 1400, 230V, metal body including taking down old unserviceable exhaust fan and deposited to MES store yard complete all as specified and as directed.

S&F as in repair heavy duty exhaust fan of size 380 mm, 230V, RPM 1400, metal body including taking down old unserviceable exhaust fan and deposited to MES store yard complete all as specified and as directed.

Supply & fixing as in repair electric water heater, storage type, electro plated steel body as per OEM design with element free induction heat transfer technology through induction coil capacity 25 litre, BEE 5 star rated with reduction heating time 10-12 mins and with digital temperature display, live temperature with smart mode, automatic operation of water heater for on and off time complete with all accessories such as safety valve, thermostat, NRV, connection piece fastner bolts including stainless steel hose pipe complete all as specified and as directed.

Supply and fixing LED building security light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame with lumen output not less than 2500 lumens suitable wattage for efficiency not less than 120 lumens/watt having secondary optics min wattage 25 watt with ingress protection IP 65/66 and potted electronic driver of minimum IP 67 with THD less than 10% CRI>80, P.F>0.95, CCT 5700K, IK>08 SPD of capacity 5 KV and testing on completion including GI bracket of suitable size complete all as specified and as directed. complete all as specified and as directed.

S&F as in repair aluminium earth continuity conductor or main earthing lead of size 25mm x 3mm fixed to wall above ground level/roof for lightning arrestor/ fixed to poles or any other indicated situation for loop earthing etc. as required using porcelain clit/post insulators with screw/ self drill GI screw with rubber washer complete all as specified and as directed Note : Necessary scaffolding for fixing of aluminium strip deemed to be included in the quoted rate

S&F as in repair test point terminal block made of gun metal or phosphorous bronze, size 75mm x 75mm x 25 mm thick, drilled and screwed including 3 Nos. 8 mm dia. 25 mm long hexagonal head screws, including polycarbonate box suitable size for protection of test point terminal complete all as specified and as directed by Engr-in-Charge

S&F as in repair of Air termination, single pointed, aluminium rod 12 mm dia and 300mm long fixed on copper / aluminium strip for earth conductivity to ground complete all as specified and as directed by Engr-in-Charge

Supply and fix as in repair porcelian shackle/post insulator suitable for fixing earthing strip fixed to wall/roof complete all as directed by Engineer in Charge. Note : Necessary scaffolding for fixing of earth strip deemed to be included in the quoted rate

Material and labour for earthing with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 25 mm x 4 mm by means of GI Welding made out of galvanised iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to control board or transformer neutral earth or as directed including earthing pit in PCC (1:3:6) type C-1, pre-cast reinforced cover with MS XPM Jalli, RCC 1:1.5:3 cover slab of size 300 x 300 x 100 mm with one handle made out of 8 mm dia round bar 20 mm dia GI pipe medium grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete shown in electrical plated No 3 and testing complete all as specified and as directed by Engineer-in -charge. NOTE : (i) The earthing pit should be provided with proper earth pit and pit cover. (ii) If the desired earth resistance is not achive during testing as per IS the complete earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissable.

A. R. ELECTRICALS (BID ID -3502153)

M/s Pooja Enterprises (BID ID -3502212)

M/s Karbhagam Sales Agency (BID ID -3501694)

PTech Engineers (BID ID -3500078)

M/S. RUDRA ENTERPRISES (BID ID -3502760)

Kathir Marketing Services (BID ID -3502280)

Tropical Refrigeration (BID ID -3502957)