A/R and M/O of Inspection Hut and IPH colony at Salasi in Tehsil and Distt. Hamirpur

Providing and injecting chemical emulsion for post-construction anti-termite treatment (structural pest control) in the completely finished building to create a continuous chemical barrier against subterranean termites as per IS: 6313 (Part 3). Treatment along the inner wall base & junctions: Drilling holes of 12mm diameter at a downward angle of 45 degree at intervals of 300mm along the junction of walls and floors. injecting chemical emulsion under pressure into the holes till refusal or up to a maximum of 0.5 litres per hole, and subsequently sealing the holes with cement mortar 1:3 mixed with matching pigment to match the existing floor finish. Treatment of Wooden Door/Window Frames (Chokhats): Drilling 6 mm to 8 mm diameter holes in the wooden frames at a downward slope at intervals of 150mm to 200mm near the bottom junctions and junctions with brickwork/concrete, injecting chemical emulsion mixed with appropriate solvent/carrier (Deodorized Kerosene / MTO) under pressure using hand injection pumps, and liberal surface spraying/brushing over affected structural timber, followed by plugging the holes with wooden plastic compound or matching putty.External Perimeter Treatment: Drilling holes of 12 mm diameter at intervals of 300 mm along the external wall perimeter up to a depth of 300 mm to 500 mm into the sub-grade/apron, injecting chemical emulsion @1.5 litres per hole to block entry paths, and sealing with cement mortar.