Loading
Loading…
Loading…
Tender Value
₹21.2 L
EMD Value
₹42,400
Closing Date
30 Mar 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
13 conditions · 2 needing a document upload
No Financial credentials are required for tenders having advertised value up to Rs.50 lakhs.
No Technical credentials are required for tenders having advertised value up to Rs.50 lakhs.
26 conditions · 2 needing a document upload
Uploading of Scanned copy of Statement of Bank details, PAN & GST.
Compliance with Public Procurement (Preference to Make in India) Policy: This tender complies with Public Procurement (Preference to Make in India), Order 2017-Revision dated 19.07.2024 of Department of Promotion of Industry and Internal Trade, Ministry of Commerce and Industry, Govt. of India (herein referred to as PP-PIM), circulated vide Ministry of Railways (Railway Board)'s letter No.2020/RS(G)/779/2/Pt.1 (E3322671) dated 20.08.2024, and all its amendments. Only Class-I local suppliers (as defined in PP-PIM) shall be eligible to bid for list of items specified in Ministry of Railways (Railway Board)'s letter no.2025/RS(G)/779/3 (E3488356) dated 02.05.2025. For other items, only Class-I and Class-II local suppliers are eligible to bid. At the time of bidding, each bidder is required to indicate percentage of local content (as defined in PP-PIM) and provide self-certification that the item offered meets the local content requirement for "Class-I local supplier"/"Class-II local supplier", as the case may be. If this self-certification is not submitted, the bid will be summarily rejected. For contracts above Rs.10 crores, the provisions of Para 9(c) of PP-PIM shall be additionally applicable. For the purposes of this NIT, the "local content" (as defined in PP-PIM) requirement to categorize a supplier as "Class-I local supplier" is minimum 50% and for "Class-II local supplier" is minimum 20%. Also, the Margin of Purchase Preference (as defined in PP-PIM) is 20%. The procedure for preference to Make in India shall be as specified in PP-PIM. Uploading of self-certificate for meeting the local content requirement for "Class-I local supplier"/"Class-II local supplier", as the case may be (proforma attached). Non-submission of this certificate will lead to summary rejection of bid. ( Click here to download Format)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Harihar - Construction of community hall
Y-E-29-2025-26-101
Y-E-29-2025-26-101
Open
Works - General
180 Days
Dharwad, Karnataka
₹0
₹42,400
30 Mar 2026
9 Mar 2026
16 Mar 2026
83 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 21,17,597 | ||
| — | 30.00 | — | — | ||
| Excavation of cable trench below the Rail Track/Road/Tiles 450 mm. wide and 1000 mm. deep in all types of soil and refilling the released ballast/refilling concrete/Tiles to bring back to original surface. | — | — | — | 8,118 | |
| — | 200.00 | — | — | ||
| Excavation of trenchless duct using horizontal drilling in all types of soil for laying of LTUG/HTUG cable across the track/road. | — | — | — | 3,03,800 | |
| — | 300.00 | — | — | ||
| Supply of XLPE Cable 16 sq. mm 4 Cores as per detailed Description / Specification as per Product # 1 of GeM Contract No. GEMC-511687744358962 dt.16/09/2024). | — | — | — | 35,400 | |
| — | 300.00 | — | — | ||
| Laying of 4 x 16- 35 Sq. mm LTUG cable with aluminium conductor including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc. | — | — | — | 2,619 | |
| — | 100.00 | — | — | ||
| Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of above 35 sq. mm up to 95 sq. mm size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. | — | — | — | 21,700 | |
| — | 100.00 | — | — | ||
| Laying of 4 x 50 - 240 Sq. mm LTUG cable with aluminium conductor including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc. | — | — | — | 1,971 | |
| — | 500.00 | — | — | ||
| Laying of HDPE Pipe of dia 75 mm grade PE-100 with pressure of PN 6 for safety of cables and all the ends should be sealing with bituminous compound. | — | — | — | 6,570 | |
| — | 36.00 | — | — | ||
| Supply and Fixing of GI pipe 'B' class of dia 50 mm. for cable rising & protection including clamping, fixing arrangements and sealing with bituminous compound. | — | — | — | 27,338.76 | |
| — | 400.00 | — | — | ||
| Wiring for circuit/ sub main wiring along with earth wire 2 X 4 sq. mm + 1 X 4 sq. mm earth wire sizes of FRLSH PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. | — | — | — | 97,248 | |
| — | 600.00 | — | — | ||
| Wiring for circuit/ sub main wiring along with earth wire 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLSH PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. | — | — | — | 1,19,964 | |
| — | 400.00 | — | — | ||
| Wiring for circuit/ sub main wiring along with earth wire 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire sizes of FRLSH PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. | — | — | — | 93,200 | |
| — | 50.00 | — | — | ||
| Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required . | — | — | — | 22,388 | |
| — | 25.00 | — | — | ||
| Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required . | — | — | — | 13,752 | |
| — | 210.00 | — | — | ||
| Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLSH PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit , with modular switch, modular plate, suitable box and earthing the point with 1.5 sq.mm FRLSH PVC insulated copper conductor single core cable etc. as required.(Group-A). | — | — | — | 2,13,150 | |
| — | 8.00 | — | — | ||
| L.T. Earthing arrangements for hard soil using 50 mm C-Class GI Pipe- 2.7 Mtrs. length, soil treatment by spreading of 25 kgs. each of salt and charcoal, duly painting earth pit with black paint and stenciling of earth resistance value with date, including supply and laying of 6 SWG G.I. wire and other hardware to connect equipment at site complete. | — | — | — | 43,488.08 | |
| — | 8.00 | — | — | ||
| Supply, erection, commissioning and testing of tubular G.I post 6 meter long, including foundation work, complete with light bracket suitable for illumination with loop in loop out box with SMC connector and 0.5 A MCB as per detailed specification. | — | — | — | 1,12,384.8 | |
| — | 8.00 | — | — | ||
| Supply of 45 watt 6500k LED street light fixtures, Led Luminaire Light similar specifications (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC- 511687746333960 dt.11/06/2024) (as per specification SWR/LED LIGHT FITTING (Indoor/outdoor) /001-2016 effective from 18.04.2016 or latest.). | — | — | — | 4,872 | |
| — | 8.00 | — | — | ||
| Freight, Fixing and commissioning of LED fitting complete with suitable accessories. | — | — | — | 871.12 | |
| — | 48.00 | — | — | ||
| Wiring to street light fittings mounted on tubular light pole from cable loop in loop out box up to control gear box and light fitting with 3 core of 1.5 sq.mm PVC insulated flexible Copper wire taken through hollow portion of lamp post duly providing rubber gommets and sleeving at entry point to pipe. | — | — | — | 6,912 | |
| — | 4.00 | — | — | ||
| Supply, fixing and commissioning of 12 Way Double Door SPN MCB Distribution Board with following switch gears (All 'Series) SPN RCBO 25A with Sensitivity 30 ma - 1 no, SP MCB - 6 - 32 A - 8 No, along with 1 No. 1P + N SPD with required suitable hardware and internal wiring complete. | — | — | — | 40,510.52 | |
| — | 1.00 | — | — | ||
| Supply, fixing and commissioning of Timelite Distribution Board - Timelite 32A 3 pole/230V-Digital time switch similar to M/s Indo Asian Catref TL032DB0 or similar specifications or latest. | — | — | — | 21,761 | |
| — | 30.00 | — | — | ||
| Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 20 mm B class pipe for down rod 2 mtrs/suitable/length/size for each fan and with all required hardware items complete. | — | — | — | 11,910 | |
| — | 10.00 | — | — | ||
| Supply, assembly, fixing and commissioning of 200 mm size BLDC Ventilating fan complete Similar to M/s. ATOMBERG Model no. Efficio. or similar specifications or latest. | — | — | — | 17,516.1 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning Hygiene Pre-coated GI Sheet Insect Killer, Size 40 Litter with 18 watts UV tube of Insect Killer / trapper as per specifications suitable for Home, Restaurants, Hotels & Offices, Insect Control (Grey) with all other necessary accessories complete. | — | — | — | 4,510 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing and commissioning of 22 watt LED batten 1150 mm ( 4 feet approx.) length lighting fixture as per specification SWR/LED LIGHT FITTING(Indoor/outdoor)/001- 2016 effective from 18.04.2016 or latest. | — | — | — | 10,900 | |
| — | 16.00 | — | — | ||
| Supply, fixing, testing and commissioning of 10 watt, 560 mm (2 feet approx.), 6500 k LED batten fixtures Including all other required accessories complete. | — | — | — | 2,851.84 | |
| — | 2.00 | — | — | ||
| Supply and provision of AC operated door call bell to work in 230 V AC 50 Hz. | — | — | — | 998.42 | |
| — | 10.00 | — | — | ||
| Supply of RCC cable markers. The lettering on the cable marker shall be "ELEC"/''LTUG''/''HTUG'' as per the instructions of Railway representative at site. | — | — | — | 2,600.2 | |
| — | 10.00 | — | — | ||
| Digging of pit to a depth of 800mm of size 300mmX300mm, casting of concrete foundation of size 300mmX300mm300mm and placing of RCC cable markers on top of the foundation and refilling the pit and consolidating it by ramming. The cable markers shall be provided at an interval of 20 meters. | — | — | — | 1,896.2 | |
| — | 1.00 | — | — | ||
| Supply and fixing of 3 phase meter box of suitable size with double door and with viewing MC along with suitable hardware and accessories complete | — | — | — | 2,906 | |
| — | 1.00 | — | — | ||
| Supply, fixing and commissioning of 4 Way Double Door TPN MCB Distribution Board with following Switchgears (All 'C' Series), 40 A TPN RCBO with Sensitivity 100 mA- 1 No, SP MCB 6- 32A-12 Nos. as outgoing MCB's with required suitable hardware and internal wiring complete. | — | — | — | 13,278.73 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing & commissioning of centrifugal type vertically multistage bore-well submersible pump as per the following technical specification. The Pump model QF duty point will be Flow 120LPM @ working Head 110 Mtr. The Pump design will be the Flow Range starting from 15 LPM to 130 LPM & Head Range of 150 Mtr. To 82 Mtr. The Pump material to be like, Pump impeller-SS 304, Pump casing-SS 304, Pump Shaft- Duplex Steel, Pump motor body- SS 304, Pump inbuilt strainer & NRV- SS 304. Pump motor should be 5.5HP PMSM (Permanent Magnet Sync. Motor, i.e. operate on BLDC Technology) converter feed which will operate through 415V-AC/50 Hz standard power supply. The motor manufacturing and testing as per IEC-60034-30-2 & IEC-60034-2-3. Supply and installation smart VFD rust proof for outdoor application to operate 5.5 HP PMSM type motor with dry run protection, over & under voltage protection, phase reversal protection, single phase preventer, graphical display, GSM based remote monitor system (RMS), fault indication alarm system, IP-65 deg. Of protection, water level indicator, auto/manual operation through device like mobile/laptop/PC. The regular pump operational data like current, voltage, hours of operation, power consumption to be access through Railway engineer devices like Mobile/Laptop/PC. The VFD selection to be done considering the maximum ampere rating of the pump on full load condition. | — | — | — | 74,409.3 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing and commissioning of 5 STAR rated 3 phase 5 HP Mono submersible pump similar to M/s KSB Model No. MR 5 LH or similar specifications. | — | — | — | 42,791.63 | |
| — | 1.00 | — | — | ||
| Supply, testing, installation and commissioning of pump starter panel suitable for 5 HP submersible pump. | — | — | — | 6,388 | |
| — | 150.00 | — | — | ||
| Supply of 3 core, 4 sq.mm flat submersible cable with flexible copper conductor, multi stranded, pvc insulation type c, type 2 and sheathed for submersible pumps (for maximum conductor temperature 70 degree celsius or 85 degree celsius) duly ISI marked conforming to is:694 or latest, sheath type st2,bis marked. (Warranty period: up to 30 months from the date of delivery.) | — | — | — | 18,531 | |
| — | 150.00 | — | — | ||
| Freight, fixing, testing and commissioning of of 3 core 4.0 Sq.mm flat cable for power supply to Submersible pump | — | — | — | 2,914.5 | |
| — | 120.00 | — | — | ||
| Supply and fixing of heavy duty uPVC column pipe coupler of 40mm dia, pressure 35 kg/cm2 with collars and other required suitable accessories complete. | — | — | — | 62,956.8 | |
| — | 20.00 | — | — | ||
| Freight, Fixing and commissioning of LED fitting complete with suitable accessories. | — | — | — | 2,508 | |
| — | 200.00 | — | — | ||
| Laying of HDPE Pipe of dia 110 mm grade PE-100 with pressure of PN 6 for safety of cables and all the ends should be sealing with bituminous compound. | — | — | — | 3,942 | |
| — | 30.00 | — | — | ||
| Supply and provision of 26" BLDC high-speed wall-mounting fan, 3-blade design, energy efficient (20W-135W), 700-1400 RPM, min of 13,500 m³/hr airflow, 60-foot air throw, 4-speed control with 2-year warranty. | — | — | — | 3,85,770 | |
| — | 50.00 | — | — | ||
| Provision of Electrical external service connections etc., (payments to EB corresponding charges etc.) | — | — | — | 2,50,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender booklet
ATTACHMENT
GCCApril-2022.pdf
ATTACHMENT
JPOintenderdocumnets.pdf
ATTACHMENT
AdvanceCorrectionSlipsNo1-10toGCC-2022.pdf
ATTACHMENT
TB-Harihar-Constructionofcommunityhall.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .