A/R and M/O Sub-Centre Building at Dhadi Ghunsa in Tehsil Jubbal Distt. Shimla HP

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.

Providing and Laying concrete 1:4:8 for plain /reinforcement concrete in open foundation complete as per drawing and technical specification clauses 702,803,1202 and 1203 including all leads and

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position 3 and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, 4 balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. D-Pipe 19Rmt @2.28/rmt.

Providing and Laying concrete 1:6:12 for plain/reinforcement concrete in open 5 foundation complete as per drawing and technical specification clauses 702,803,1202 and 1203 including all leads and lifts.

Stone masonary work in cement mortar in foundation complete as per drawing and 6 technical specification clauses 702,704,1202 and 1203. Randam rubble masonry in cement mortar 1:6 including all leads & lifts.

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete: With ready mixed priming paint brushing red lead, Red-oxide/zinc oxide chrome.

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt, dust and other foregin matters: Enamel paint other than white

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040 mm bowl depth 225

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with 10 specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid