SPL REPAIR TO BLDG NO T-87 OF 212 FD WKSP COY, EME, SPL REPAIR TO BLDG NO. T-529 AND T-530 AT 22 GUARDS, SPL REPAIR TO BLDG NO. T-581 AT 19 ARMD REGT AND SPL REPAIR TO BLDG NO. T-684 AT 801 FD WKSP UNDER TANGTSE MIL STN UNDER GE 860 EWS

M&L for 9mm Pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws/nails to timber frame work in wall portion complete all as specified and directed.

S&F grid false ceiling GI system powder coated prelude (Main runner sec 32x24x0.30x3600mm,Cross Tee 25x24x0.30x1200 mm, wall angle 24x24x0.40x3000mm and including providing and fixing PVC pre laminated aluminium foil backed Gypsum tile of size 595x595x9mm thick fixed in ceiling frame work suspended by GI wire complete all as specified and as directed by Engr-in-Charge

Dismantling of timber scantling in fillets, posts, rafters, purlins etc under 40Sq. Cm in section in framed work complete all as specified and directed.

M&L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area exc 13 Sqcm and not exc 25sqcm secured with nails complete all as specified and directed.

M&L for 2nd class soft wood fillets sectional area exc 3 sqcm and n exc 6 sqcm rectangular or triangular in section but bullnosed, splayed, chamfered or rounded on one edge of face, secured with nails or brads, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails

M&L for SDC laminated flooring 8 mm thick of any coloured manufactured by direc pressure laminated (DPL) wherein the emply Abrasive aluminium oxide overly alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength complete all as specified and directed by Engr-in-Charge.

Hacking out old broken of glaass from wooden frame or steel frames or stone concrete or brick with putty or fixed with nail complete all as specified and directed.