Repair/Maint of Boundary/Culvert/Compound/ Retaining wall at SW Zone at RMS.

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for PCC Type D-2 (1:4:8) using 40mm graded aggregate as in foundation

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier.

M& L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) in surface channels and drains including necessary formwork.

Extra for forming fair finished drain or channels 30cm inner girth in cement concrete using extra cement including forms,mitred stopped ends etc

M&L 75mm thick PCC (1:4:8) type B2 using 40mm graded stone as in sub base complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement morter including all quoins, arches pillars etc but excluding ashlars facings dressed stone work and precasted concrete article complete all as specified and directed.

M&L for random rubble uncoursed stone walling well bounded, bedded and solidly hearted built in cement mortar 1:4, complete all as specified.

,-do- but except stone

M&L pre cast cement concrete bonds using PCC 1:3:6 type C 1 using 20 mm graded stone aggregate in lieu of stone bonder and set in CM 1:6 including necessary form work etc complete all as specified and directed. Note :- (a) This item is applicable for item No 9 & 10 herein before only. (b) No deduction in volumes as well as in rates shall be made for PCC bond incorporated in random rubble masonry.

Raised pointing to random rubble uncoursed stone masonry in CM 1:4 complete all as specified.

M & L for providing, cement concrete type B1, 1:2:4 (20 mm graded agg) in coping and the like complete all as specified and directed.

M & L in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by wt of cement finished fair faces of brick/concrete surfaces even and fair without using extra cement .

M & L rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement.

Supply only integral water proofing compound ( ISI marked )

M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified & directed by Engineer-in-Charge.

M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with steel wire brushing and applying one coat of white wash on wall complete all as specified & directed .

M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces complete all as specified & directed.

M&L for complete removal of existing treatment of plastered surface of wall and apply two coats of cement base paint.

M&L Providing precast cement concrete louvres and jallies,type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25mm thick (mea sured solid) and setting in mortar 1:4,including necessary form work and mould complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.

M&L RCC M-25 walls,retaining walls,basement wall ballast wall and the like supported on walls, beams and column in floor, any thickness above top of footing , including attached pilasters and buttresses.

S & F mild steel TMT bars 10 mm and over cut to length, bent to shape required incl. cranking bending spirally for hooping for column hooking ends and binding with and incl. mild steel wire (annealed) not less than 0.9 mm dia.

SHRI BANARSI PRASAD

M/s Phoenix Constructions

Rameshwar Prasad

SAYED ALI AND SONS

commercial enterprises

M/s MATRI ENTERPRISES

Shri B K Ukil