Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.9 LAccepted-AOC PLOT NO RZ B 1 59 KH NO 534 535 BLOCK B 1 NEW ROHANPURA PP NO 1416 NAJAFGARH NEW DELHI 110043 | NEW DELHI | NAJAFGARH | DELHI | 110043 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹39.7 L+₹92,040.50 (2.37%)Rejected-Finance PLOT NO 10 9 OM VIHAR PHASE 1 A UTTAM NAGAR NEW DELHI 110059 | WEST DELHI | DELHI | 110059 | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹40.9 L+₹2.0 L (5.25%)Rejected-Finance | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹40.9 L+₹2.1 L (5.33%)Rejected-Finance | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹41.1 L+₹2.2 L (5.79%)Rejected-Finance A 212B GALI NO 1 SHAKARPUR DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L5 | Rejected-Finance Not Being Lowest |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
23 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Delhi Cantt-10
GE (Central) Delhi Cantt-10
PROVN OF CERTAIN SANCTION WORK IN THE AREA OF AGE B/R-I AND AGE B/R-II UNDER GE CENTRAL DELHI CANTT-10
2023_MES_577671_1
GE/C-76/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Delhi Cantt-10
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE (Central) Delhi Cantt-10
₹99,000
Yes
9 Mar 2023
28 Jan 2023
25 Feb 2023
28 Jan 2023
23 Feb 2023
11 Feb 2023
28 Jan 2023 - 11 Feb 2023
Amount
Dismantling of asbestos cement corrugated or semi corrugated sheet as in roof coverings complete all specified and directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) and disposing rubbish off the premises of cantonment complete all as specified and directed.
M&L for laying 75mm thick Cement concrete ( 1:3:6) type C- 2, using (40mm graded stone aggregate) as in sub base complete all specified and directed by Engr-in-Charge.
S & F MS Work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. all as specified and directed by Engr-in-Charge.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge / roof covering/ cladding to wall, fixed with self tapping screws as specified all as specified and as directed.
M & L for preparation of new undecorated steel surfaces of any description and in any position exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
M&L mild steel plates (plain or chequered) channels, square cut or notched (ordinary or counter sunk) forming holes, with riveted, bolted or welded attachement complete all as specified.
M&L machine cut kota stone slab of size 550x550mm flooring 18 to 20 mm thick over 15 mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment match the shade of the slab including rubbing and polishing complete.
M&L machine cut Kota stone slab 18 to 20 mm thick in riser of steps, skirting, dadoand pillar laid over 10 mm thick backing coat of cement morter 1:4 complete all as directed.
Taking down cement plaster of any description and in any position of brick or stone wall/concrete surfaces on walls ,ceiling etc including raking out joints ,hacking for key scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:6 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed .
M&L Rendering 15 mm thick of CM 1:4 on fair faces of brick or concrete surfaces is to be finished even and smooth without using extra cement with mixing of water proofing compound complete all as directed.
M&L for preparation of the newly plastered surfaces of wall and applying 3 coats of white wash on wall surfaces complete all as specified and directed.
Preparation of old surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L for applying two coats of cement base paint including watering and curing of surface adequately before and after application of cement base paint complete all as specified and directed.
Hacking out old broken glass of any thickness and any description from metal frame and supply and fixing 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.
S & F in repair of steel rolling shutters without ball bearing, as specified incl top cover anchoring rod hasp & staple and one shop coat of primer before erected in position as directed complete manual type thickness of lath 1.25mm complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L Hardcore of broken stone or boulders guage n.exc 63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface.
M&L for sand filling under floors or in foundation including watering and consolidation.
M&L 60 mm thick , M-35 grade machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 complete as directed.
M&L Providing, cement concrete type B-1(1:2:4) in roof or in kerb stones rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided.
M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 20mm graded stone aggregate). Plinth protection laid to a slope of 1 in 24 in alternate basis system. Each bay shall not exceed 3m in length, 12mm wide & 75mm deep joint shall be formed between the bays which shall be filled with Mastic filling to full depth comprising a mixture of 1 part of heator hot blow bitumen 85/25 portion and two parts of heated badrapur sand (by volume) complete all as specified and directed.
M&L for 40 mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) finished even & smooth without using extra cement complete all as specified and directed.
Supply only 38 mm width Glass dividing strips, 3 mm thick inserted in position, conform to design complete all as specified and directed.
Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed all as specified.
M&L for 150mm bore DWCPE drain pipes laid in trenches and jointed in CM 1:1 with spun yarn complete all as specified and directed.
M&L for PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregate in concrete bedding to drain pipes including packing under haunching against the sides of pipes after they are laid and tested for150 mm bore pipe complete all as specified and directed.
M&L SFRC Factory made Precast cement concrete manhole cover' area of each cover Ex .20sqm but not exceeding 0.75 sqm 50 mm thichK TypeB1 1:2:4 concreting including grove and hook arrangement for lifting and placing in position and side covered by MS Sheet complete all as specied and directed by E-IN-Charge.
M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in foundations, filling and mass concrete complete all as specified.
M&L for RCC Design mix M-25 (using 20mm graded stone aggregate) as in foundation including rafts, footing, foundation beams, plinth beams, lintel band, bases for columns, etc and mass concrete all as specified.
M&L for RCC Design mix M-25 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts all as specified.
M&L for RCC Design mix M-25 (using 20mm graded stone aggregate) as in beams, cantilevers, bressumers, lintels etc.
M&L for RCC Design mix M-25 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies,desk slaby and in shelves and the like.
M&L for brick work with sub class 'B' bricks old size bricks strainght or curved on plan exc 6m mean radius built in CM 1 : 6 . Complete all as specified.
Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 compolete all as specified and directed.
Removal of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point.
M & L for mild steel bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips compolete all as specified and directed.
All as per item 42 above descriped in above but 6mm to 8mm dia as in stirrups and binders.
M&L formwork to sides of concrete foundation, footing, rafts and raft beams, sides and plinth beams; and similar work; vertical or to batter, rough finised surface of concrete.
M&L for formwork to sides of Col, pillars, posts, fair finished, rectangular, square or polygonal surface of concrete.
M&L for formwork to side and soffits of roof slab and roof beam beam, lintel, fair finished flat surface of concrete.
M&L PCC 1:4:8, type D2, 100 mm thick, finished even and rough to receive top surfaces all as specified and directed.
M&L for 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster. complete all as specified and directed by engineer-in-charge complete all as specified and directed compound complete.
M&L for 10mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster. complete all as specified and directed by engineer-in-charge complete all as specified and directed compound complete.
M&L for 5mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster. complete all as specified and directed by engineer-in-charge complete all as specified and directed compound complete.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete.
S&F for 75 mm bore cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.
S&F for 75 mm bore cast iron bends with door plate & tee complete all as specified and as directed.
S&F for 100 mm bore cast iron bends with door plate & tee complete all as specified and as directed.
S & F 75 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed.
S & F 100 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and as directed.
M&L for glazed ceremic tiles (600x300x8mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.
S&F Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame and fixing with ancher bolts all as specified and as directed.
S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.
S&F MS butt hinges medium weight 100 mm size fixed with screws.
S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws.
S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with MS screws.
Supply and fix vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘standard Grade P’ or ‘S’ trap front or back inlet (excluding flushing cistern and flush pipe ) complete all as specified and directed by Engr-in-Charge
S&F in 10 Ltr PVC valveless, syphonic action type flushing cistern low level with inlet, ball valve, float and handle including brackets and PVC out let sutaible for IWC compolete all as specified and directed.
Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed.
Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed.
S & F in 15mm angle valve cast copper alloy screwed down high pressure with fancy type chromium plated handle screwed both ends or for unions etc.
Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for conceled water tubing etc cutting exceeding 10cm girth but not exc. 20 cm all as directed.
S & F 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule in repairs.
M&L for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description.
M & L for in PVC connection 450mm long with 2 nos brass check CP nuts as suitable complete all as specified.
S & F in vitreous china wash hand basin (oval type) white of size 550x400mm long incl fixing waist pipe and chromium plated brass waste coupling and a pair of mild steel angle iron brackets of suitable size complete all as specified.
S&F 15 mm dia pillar taps, fancy type brass with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified.
M&L for roof treatment as per the description below :- a) preparation of roof surfaces by removing all loose material /dust extra for carrying out water proofing treatment. b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces. c) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm and apply two coat of silver shield bitumestic aluminum paint all as specified. Make: Asian/ STP/ Torchstar/JWL.
S & F Pressed steel frames box type made of 1.25 mm thick MS Sheet double rebates of size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc, incl PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.
S&F 35 mm thick 2nd class hard wood glazed and skelton shutter devided into square with plain, chamferred or rounded sash bar and fitted with cut and mitred beads for securing glass, size of members as per SSS Part - I section 8 clause 8.24 (a) compolete all as specified and directed.
M&L aluminium alloy powder coated windows including aluminium coated frames silding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazing clips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed.
S&F aluminium ventilator partly glazed/ gauzed including including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. provision for fixing the exhaust fancomplete all as specified and as directed
Material and labour for aluminium alloy Powder coated standard 10mm section and opening of size window grill as per approved sample and as per IS specifications complete all as specified and as directed.
M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface.
M&L for Chajjas,fibreglass Reinforced Plastic (F. R. P.)chajja 4mm thick of required colour ,size and design made by Resin Transfer Moulding (RTM)machine Technology, Resulting in Void free compact laminate in single piece ,having smooth gradual slope curvature for easy drainagee of water and duly reinforced by 2Nos vertical and 1No horizontally 50x2 mm thick MS flat with 12mm in built hole for gouting on the existing wall along with the 50mm flanges duly inserted and seaaled in the wall complet in one single piece casted monolithically, including all necessary fitting . The FRP chajja should manufacture using unsaturated polyester resin as per IS: 6746 , duly reinforced with fibreglass chopped strand mat (CSM)as per IS:11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extrem of tempreture ,weather & sunlight.
Schedule of Credit
LAMBA ENTERPRISES
M/S.M.S.Devi.Const.Co
R S CONSTRUCTION CO.
VED PRAKASH ARORA
M/S MSD & Associate
M/S GR construction compony
a.k constructions
SHREE RAM BUILD TECH
imran construction company
SHIVA ENTERPRISES
M/s SAAR ENGINEERS
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .