REPAIRS/MAINT OF CHAJJA, BALCONY AND ALLIED WORKS AT ARJAN AREA, REPAIR MAINT OF WATER PIPE LINE, CLEANING OF WATER TANK, WALL PLASTERING, PAINTING AND ALLIED WORKS AT RS TIPNIS, REPAIR/ MAINT, TILING, PLASTERING AND ALLIED WORKS AT ARJAN AREA

Amount

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of 1000 ltr capacity PVC water storage tank without dismantling the tank incl writing the item "Tank Cleaned on ____" indicating the date, month & year of cleaning on external surface of tanks walls with synthetic enamel paint, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of 500 ltr capacity PVC water storage tank without dismantling the tank incl writting the item "Tank Cleaned on ____" indicationg the date, month & year of cleanign on external surface of tanks walls with synthetic enamel paint, complete all as specified and directed.

Taking down soil/waste vent and rain water pipes including all fittings of any size, and pattern in any position, complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

All as per item No 4 above but except pipes (serviceable pipes obtained from item No 3 shall be re-used) complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

All as per item No 6 above but except pipes (serviceable pipes obtained from item No 3 shall be re-used), complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old water tank of any description, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20 mm bore pipe inculding dismantling of old water tank of any description, complete all as specified and directed.

S & F in repair 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20mm-210gms.), complete all as specified and directed.

S & F in repair 15mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 15mm-142gms.), complete all as specified and directed.

S&F in repair tank cover suitable for any type of rotational moulded polyethylene water storage tanks, complete all as specified and directed.

Taking down 20mm bore steel water tubing and connection from wall/ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F steel water tubing and connection medium grade 20mm bore with all fitting, fixed to wall or in ceiling, complete all as specified and directed.

Re-fixing old steel tubing and connection 20mm bore in new or old position complete on wall/ceiling, complete all as specified and directed.

Cleaning/uprooting of vegetation/small trees, mud, garbage, waste etc growth on inaccessible RCC roof, AC sheet roof, below wind tie, cleaning of AC sheet, valley gutter and shaft portion of wall surfaces, back side of toilet, complete all as specified and directed.

Cleaning the surfaces of brick/RCC using wire brush, brooming down and washing down with water to remove dust etc. and brushing with neat cement slurry @0.5 kg/sqm with acrylic based polymer modified cementitous composite (pidifine 2K) @ 0.50 kg/sqm, complete all as specified and directed.

Removal of vegetation/shrubs etc incl cutting holes into or through brick walls/concrete and removal of small trees/woods etc and making good distributed surfaces with cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate), complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exceeding 10cm but not exceeding 20cm girth in brick walls, complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and dircted.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and smooth without using extra cement including mixing of water proofing compound required @ 3% by weight of cement or as per manufacturers instructions (WPC shall be measured and paid separately), complete all as specified and directed.

M&L 5mm thick rendering in cement mortar (1:3) on fair faces of brick work or concrete surfaces, rendering finished even and smooth (without using extra cement) as in ceiling, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any descrition and in any position not other wise specially provided for and disposal of unserviceable materials, debris and rubbish off to a distance not exceeding 100m, complete all as specified and directed.

M &L 25mm thick cement concrete (1:2:4) type B-O (12.5mm graded crushed stone aggregate) as in levelling course of roof, floor and finishing the surface even and smooth without using extra cement with waterproofing compound as per manufacturer instructions, complete all as specified and directed. (WPC shall be measured and paid separately)

M &L 40mm thick plain cement concrete (1:2:4) type B-O (using 12.5mm graded crushed stone aggregate) as in floor finishing the surface even and smooth without using extra cement with waterproofing compound as per manufacturer instructions, complete all as specified and directed. (WPC shall be measured and paid separately)

M & L for plain cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) cast in lintels up to 1.5m span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in hold fast blocks or in similar situations, complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

M&L for preparing new plastered surfaces of wall applying two coats of cement base paint over a coat of alkali resistant primer , complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall, cornices etc and applying two coats of weather coat exterior emulsion paint paint of approved colour, complete all as specified and directed.

Supply only liquid water proofing compound, of approved make (ISI marked) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

M & L for preparation of old painted steel surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.

M&L for preparation of new steel or Iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whitening primer ,complete all as specified and directed.

M & L for complete removal of existing treatment of any type from walls and applying one coat or more coats of wall care putty on walls/ceilings to obtain a smooth surface including making good any undulations on the surfaces and applying two coats of oil emulsion distemper, complete all as specified and directed.

M & L for uprooting of tree and repairing the hole with concrete (1:1.5:3) type C-0 (using 12.5mm graded crushed stone aggregate) by adding of water proofing compound and at any girth, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M & L non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in CM(1:4), complete all as specified and directed.

M & L glazed (coloured) ceramic tiles of size (300 x200mm) x 6-7mm thick, as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc to match with the shade of tiles laid over and including rendering 10mm thick in CM (1:3), complete all as specified and directed.

M & L for 20mm thick granite slab of any type and colour tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite in floorings including cutting and polishing laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed.

M & L for 20mm thick granite (of any type) tiles machine cut in skirting/dado laid and bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including cutting and polishing, laid over and including rendering 10mm thick in CM (1:3), complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15cm thickness. (below or above ground level), complete all as specified and directed.

Taking down unserviceable street light fittings/flood light of any description, from existing poles and removing from site, complete all as specified and directed.

Taking out existing unserviceable GI braket of (any shape/size) from pole and S&F 40mm nominal bore GI pipe brackets made out of medium grade pipe of required length not less than 1.20M consisting of mounting brackets made out of mild steel FI 40x6mm of required shape (two Nos per GI pipe bracket) duly fitted with 4 Nos mild steel nuts, bolts and washers in walls/poles etc. and painting with two coats of synthetic enamel paint (1st grade quality) over one coat of red oxide zinc chrome primer, complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation, etc, and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm in soft loose soil, complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

M & L for horizontal boring under the road (with manual method) below 1m from the road surface and dia of hole not exc. 100mm, with out damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and directed.

S&F galvanized iron tubing 40mm bore (light grade) with all fittings for protection of cables, laid in trenches, complete all as specified and directed. (Note:- Excavation and earth work shall be measured and paid separately)

Taking down/out unserviceable UG cables of any cross sectional area and connections including bricks, GI Pipes, etc of any description, laid in trenches and/or fixed with walls/poles and removing from site, complete all as specefied and as directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor for 10 Sqmm 4 core, complete all as specified and directed

All as per ser item No. 58 here in before but 16 Sqmm 4 core, complete all as specified and directed.

M & L for disconnecting burnt end or portion of UG cable, removing the cable from loop including necessary excavation and earth work, relaying and reconnecting the cable by removing burnt portion of cable and preparing fresh terminal for cable of cross sectional area 10 Sqmm 2 core to 95 Sqmm 3.5 core of LT cable to pole, main switch, LT panel etc, complete all as specified and directed .

M&L for providing plain cement concrete (1:2:4) type B-1, (using 20mm graded crushed stone aggregate) as in coping to poles etc including necessary form work, complete all as specified and directed. Note:- (Pole copping shall be carried out above ground level of existing poles)

Supply, installation, testing and commissioning of CPRI approved factory fabricated feeder pillar (outdoor type) box weather, dust and vermin proof fabricated out of 3mm thick CRCA steel sheet outer portion AC 415 volts, 50 HZ of size 600mm x 400mm x 300mm mounted on PCC foundation and inner portion of size 2.0mm thick, suitable size of MS channel supports and with suitable size of angle iron legs for grouting, steel sheet powder coated paint internally and externally and locking arrangement including all incoming and outgoing connection with suitable size of lugs and glands including dismantling of existing unserviceable panel and including the following:- (a) Incoming MCCB 63 Amp, 4 pole- 01 Nos (b) Outgoing MCCB 63 Amp, 4 Pole- 01 Nos (c) Panel mounted astronomical timer with automatic on-off through 65 Amp TP contactor & by-pass function 63 Amp MCB TP for mannual on-off - 01 Nos (d) Indication lamp for each incoming and outgoing. (e) Digital Voltmeter -01 No. (f) Digital Ammeter -01 No. (g)Aluminium busbar 3 phase 4 wire for rating 200 Amps for phase and neutral-04 Nos

Supply and fixing KIOSK box weather proof made out of PVC make Sintex cat pat No GS JB 3020 or equivalent in FINOLEX/UNIVERSAL Switch Gear/ Sintex and including made out of one piece mounted SMC base and door pole mounted hinged door size 333 x 233 x 200mm out side and 300 x 200 x 105mm inside dimension comprising of aluminum bus bar 4 strips for 3 phase and neutral 63 Amp and 10 Amp MCB for controlling the street light fitting including FI clamps 30 x 4mm with necessary MS nuts bolts and washer including embossing/painting of Danger notice of size not less than 10 cm x 7.5cm with letters, figures and conventional skull and bones in signal red colour on front face of KIOSK box body, complete all as specified and as directed. Make : Sintex/Hensal/Finolex/Universal

Supply and fixing LED street light fitting 60 watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed. (Make: Surya cat Part No SLEUL 60W IP66(LxN) or equivalent model of Havells/ Cropton/ Wipro/ Philips)

Supply and fixing LED street light fitting 70/72 watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed. (Make: Surya cat Part No SLEUL 72W IP66(LxN) or equivalent model of Havells/ Cropton/ Wipro/ Philips)

Supply and fixing LED street light fitting 90 watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection , complete all as specified and directed. (Make: Surya cat Part No SLEUL 90W IP66(LxN) or equivalent model of Havells/ Cropton/ Wipro/ Philips)

Supply and fixing LED street light fitting 120 watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection , complete all as specified and directed. (Make: Surya cat Part No SLEUL 120W IP66(LxN) or equivalent model of Havells/ Cropton/ Wipro/ Philips)

S & F 3 core PVC insulated and sheathed, multi stranded copper conductor cable of size 1.00 Sqmm for connection etc, complete all as specified and as directed

M&L for earthing including testing complete with GI earth plate electrode 60cmX60cmX6mm thick buried directly in ground vertically to a depth not less than 2.25mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to and including earth lead wire 4mm dia by means of bolts, nuts and check nuts and washers etc. made of GI & connected to earthing test point and earth dolly all as shown in elect plate No 3 of SSR Pt- I including all necessary earth work, excavation, PCC chamber, (1:2:4) typr B-1 & RCC (1:2:4) type B-0 chamber cover with suitable reinforcement with handle including 15mm bore GI light grade protection pipe upto 7.5m length & 20mm bore GI medium grade watering pipe and wire mesh, funnel, char coal dust, common salt, wire mesh etc. including dismantling old U/s earting of any description, complete all as specified and directed

M & L for LED constant current driver for 45W light fittings, complete all as specified and directed. Make : Surya/Havells/Compact/Crompton

M & L for LED constant current driver for 60 W light fittings, complete all as specified and directed Make : Surya/Havells/Crompton/Compact

M & L for LED constant current driver for 72 W light fittings, complete all as specified and directed Make : Surya/Havells/Crompton/Compact

Supply and fixing LED street light fitting 40/45 watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed. (Make: Surya Cat Part No: SLEUL 45E IP66(LXN) or eqivalent in Havells/ Cropton/ Wipro/Philips)

Taking down serviceable steel pole from root carefully, transporting to other place as directed and fixing of serviceable steel pole size (8.5/9 Mtr) including excavation/earth work, disposal of surplus soil, painting of pole with two coats of aluminium paint over a coat of red oxide, PCC(1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation, PCC(1:2:4) type B-1 , (using 20mm graded crushed stone aggregate as in coping, complete all as specified and directed. Note : Earth work and PCC for fixing only shall be paid seperately under respective items of schedule and rates for removal of pole including earth work and painting shall be included in the quoted rate.

S&F in repair of galvanised wire 4mm dia in short pieces on surface or in recess for all interconnecting,and including taking out worn out and damaged strip, complete all as specified and directed.

M & L for cleaning of creepers from electric pole, Junction box and street light including replacement of cable gland, lugs, replacement of MCB 6Amp, single pole, tightening of earthing, orientation of street light bracket properly, complete all as specified and directed. Note : Rates for cable gland, lugs/thimble shall be included in the quoted rates and MCBs shall be measured and paid seperately.

S&F in replacement of MCBs, single pole, 6 to 32 Amp, "C" series, 10kA, 240Volt, complete all as specified and directed.

S&F danger notice sticker of size 8cm x 8cm, made out of industrial grade vinyl film with UV protected layer, suitable for external use, self adhesive including signage for electric danger with bones and skull, 415 volts etc, complete all as specified and directed.

M & L for dismantling of concrete poles/struts any size including disposal of dimolished material and removing debries to a distance not more than 50m, complete all as specified and directed.

Supply and errecting steel tubular swaged pole type 410 SP-31 (9.0 mtr long ) complete with Mild steel base plate and finial taper plug, bolts, nuts, washers and screws as per IS 2713 (Part II) 1980 made out of mild steel tubing including earth work, PCC, painting of pole with two coats of aluminium paint over a coat or red oxide, drilling hole in pole for passing of cable from bottom to top and marking pole No on pole, complete all as specified and directed. Note : (i). Rates for painting of poles with one coat of red oxide primer and two coat of aluminium paint (one coat before fixing and one coat of aluminium paint after fixing) over exposed surface and two coats of bituninous paint to embedded portion and coping shall be painted in alternative bands of black and white colour starting with black colour (each band of 30cm wide) by two coats of synthetic enamale paint up to 1.5 Mtr heigh included in the quoted rates. (ii) Rates for earth work and PCC shall be measured paid seperately.

S&F street light bracket fabricated out of GI tubing light grade 25mm bore bent to the shape as directed and of length 1.0 mtr complete with mounting MS clamps of flat iron size 40X5mm of suitable length 02 Nos incl nut bolts etc of suitable size, complete all as specified and directed.

M & L for PCC (1:3:6) type C-2, (using 40mm graded crushed stone aggregate) in foundations of poles/struts/air termination rod includings necessary form work, complete all as specified and directed

M & L for PCC (1:4:8) type D-2, (using 40mm graded crushed stone aggregate) as in mass concrete for foundation of poles,etc, complete all as specified and directed

Excavation over areas n. exc 1.5m deep and getting out in soft/ loose soil, complete all as specified and directed

All as per item no 86 here-in-before but depth exc. 1.5m but n. exc. 3m and ditto. Note: An amount of Rs.65630.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

BHARAT ELECTRIC

M/S BIJAY KUMAR SHIVA

M/S ROY ENTERPRISE

M/S RATHIN ENTERPRISES

M/S BISHAL ENTERPRISES

M/S. NARENDRA KUMAR GARG

M/S SARDAR MAL NAHATA

M/S. KUMAR CONSTRUCTION CO.