CA NO. CWE SGNR - 45 OF 2020-21 SPECIAL REPAIRS TO ROAD AND PATH FROM SAPPER CHOWK TO ENGR GATE AT MILITARY STATION SRI GANGANAGAR

Amount

Dismentling Bricks (laid flat or on edge) or brick tiles in floor channels, kerbs,aprons ,etc,laid dry and pointed complete all as specified and directed by Engineer-in-Charge.

Dismantling of brickwork built in cement mortar of any description complete all as specified and directed by Engineer-in-Charge.

Demolition of ashlar facing dressed stone work precast concrete articles etc. complete all as specified and directed by Engineer-in-Charge.

Surface dressing of subgrade area including levelling,watering,compacting by road roller 8 to 12 tonne capacity and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed by Engineer-in-Charge.

M&L for repair to pot holes any depth, n. exc. 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc; cutting around edges to atleast 25mm in depth, making good by filling in and including screened & graded road metal, watering and well ramming and applying evenly a tack coat (Paving Bitumen VG-10) with bituminous primer @ 5Kg/10Sqm for putting in and including premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, blinded with 0.09 Cum of stone chippings, 6.3mm size and again well rammed (including supply of binder and chippings), depth of potholes exc 30mm complete all as specified and directed by Engineer-in-Charge.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and material & labour for applying evenly a tack coat with bituminous primer (paving bitumen) (VG-10) @ 5Kg/10 Sqm on bituminous surface and M & L for providing 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.50% binder content (Paving Bitumen VG-30) by weight of total mix, laid with self propelled mechanical paver finisher, rolled and compacted to required camber and gradient with power roller complete all as specified and directed by Engineer-in-Charge.

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and depth exceeding 50mm and n.exc 100mm and including material and labour for preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and material & labour for applying evenly a priming tack coat of paving bitumen (VG-10) @ 10Kg/10 Sqm for laying premixed bituminous macadam complete all as specified and directed by Engineer-in-Charge. Note:- Bituminous macadam shall be measured and paid for separately.

M & L for providing premixed bituminous macadam (compacted thickness 75mm or less) using 4% binder content (VG-30) by weight of total mix laid with self propelling mechanical paver finisher, rolled and consolidated to required gradient and camber complete all as specified and directed by Engineer-in-Charge.

M&L for providing and fixing precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in kerb stone of any section indicated with plan fare faces including chamfers weathering's throughting etc. and setting in cement mortar (1:4) including necessary form work and excavation and earth work for embedding kerb stone at a depth as directed and tempering around kerb stone and removal of surplus soil to a distance not exceeding 50 Mtrs and deposit where directed complete all as specified and directed by Engineer-in-Charge.

M&L for PCC as in foundation type D-2 (1:4:8) (40mm graded stone aggregate) complete all as specified and directed by Engineer-in-Charge.

M&L for 80mm thick precast machine pressed concrete interlocking paving blocks M-40 grade using grey cement and pigment to match the colour of paver block, of any shape and size conforming to IS15658-2006 laid over and including 40mm thick layer of sand complete all as specified and directed by Engineer-in-Charge.

M&L for 60mm thick precast machine pressed concrete interlocking coloured glossy finished / ruberised paving blocks M-35 grade using grey cement and pigment to match the colour of paver block, of any shape and size conforming to IS 15658-2006 laid over and including 40mm thick layer of sand complete all as specified and directed by Engineer-in-Charge.

M & L for PCC (1:3:6) using 40mm graded stone aggregate as in surface channels and saucer drains in roads or similar works, rounded or chamfered on edges finished top surface even and smooth with using exra cement etc complete all as specified and directed by Engineer-in-Charge.

M&L for Painting lines, dashes, arrows, letters, etc. on roads / on path / on kerb stone / on pavements and the like exc 10cm wide with road marking paint, white or golden yellow / black including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M & L for marking of centre line, side line, stop line etc as per IRC pattern with 2mm thick thermoplastic road marking compound of approved quality using 8% mica of white/ yellow colour (colour as approved by Engineer-in-Charge) on bituminous/ concrete road surface of temprature 160ºC with a special applicator machine including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site etc complete all as specified and directed by Engineer-in-Charge.

Taking out existing breaker of any desciption properly without damaging and Fixing the same after carpeting of road work with and including fasteners & glue complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Cat eyes of size 75mm x 75mm complete all as specified and directed by Engineer-in-Charge. Make : Dark Eyes / Surya Enterprises / Greenlite / TATA BP or as approved by GE

Supply and fix Solar road stud 125mm x 125mm x 25mm made from aluminium alloy and construction powered by mono crystal solar panel with high capacity Ni-Cd rechargeable battery having view distance 1000 meters, LEDs-010mm, 6 pieces for high brightness, 12 hours of continuous lighting at night complete all as specified and directed by Engineer-in-Charge. Make : Model Dhruv -DA-110 of Sinor Infrastructure or equivalent model of Dark Eye / Surya Enterprises / Greenlite / TATA BP or as approved by GE

M&L for fixing Reinforced concrete pipes of 150 mm bore, class NP2 laid and jointed with and including required concrete if any complete all as specified and directed by Engineer-in-Charge.

M&L brick work with sub class-B old size bricks straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L 15mm thick rendering in CM 1:4 to brick / concrete surfaces of any position finished even & smooth w/o using extra cement includind taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L two coats of cement based paint over a coat of white wash on new surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. ------------------------------------------------------------------------- Note : A sum of Rs. 1,11,600.00 will be deducted on account of credit for scarifying metal / gravel taken down material. Please refer details on Srl Page No. 20(R) (Schedule of Credit) of Tender documents.

M/S BUDHRAM BISHNOI

Aggarwal brothers and company

Gyan Chand Marothia Engineer Contractor And Suppliers

KHANNA CONSTRUCTIONS

M/s Amit Construction Company