Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹22.9 L+₹1.3 L (6.00%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L2 | Rejected-Finance Other than L1 |
Tender Value
₹24.5 L
EMD Value
₹49,100
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col S S Babu
HQ 138 Works Engineers PIN-914138 C/O 56 APO
PROVN OF 08 X URINAL BLOCK AT LSRC SPL REPAIR TO BLDG NO T 838 (SANITARY BLOCKS) OF EME BN AND 01 X IRON SLIDING DOOR UNDER GE 865 EWS AT LEH
2022_MES_526598_2
138WE/L-27/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 865 EWS
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE 865 EWS
₹49,100
Yes
25 Aug 2022
1 Jul 2022
3 Aug 2022
1 Jul 2022
27 Jul 2022
8 Jul 2022
Amount
Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft and loose soil, complete all as specified and directed by Engr-in-charge.
Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil, complete all as specified and directed by Engr-in-charge.
Excavation in trenches in hard/dense soil not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for shaft, wells, pier holes etc n exc 10 Sqm on plan and n exc 1.5m in depth all as specified and directed by Engr-in-charge.
Excavation over area in soft/loose soil n exc 1.5 m deep and getting out all as specified.
Excavation over area in hard/dense soil n exc 1.5 m deep and getting out all as specified.
Excavation over area in soft/loose soil exc 1.5 m but n exc 3.0 m deep and getting out all as specified.
Excavation over area in hard/dense soil exc 1.5 m but n exc 3.0 m deep and getting out all as specified.
M&L excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m depth.
Returning filling in including spreading leveling, watering and well ramming in layers n exc 25 cm thick complete all as specified and directed by Engr-in-charge.
Removal of excavated hard/dense soil material to a distance n exc 50m and depositing at a level n exc 1.5m above the starting point, complete all as specified and directed by Engr-in-charge.
M&L for PCC type D-2 (1:4:8) using 40 mm graded crushed aggregate as mass conc and filling of foundation.
M&L for 75 mm PCC 1:4:8 type D-2 using 40 mm graded aggregate as in sub base of floor all as specified.
M&L for PCC type B-1 (1:2:4) using 20 mm graded crushed aggregate in coping, mass concrete all as specified.
M&L for RCC type B-1 (1:2:4) (20 mm graded aggregate) in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
M&L precast cement concrete (20mm graded crushed stone aggregate) 1:3:6 type C1 as in block masonary with solid blocks, exc 10cm in width and setting in cement mortar 1:6 all as specified.
M&L precast cement concrete (20mm graded crushed stone aggregate) 1:3:6 type C1 as in block masonary with solid blocks, or slabs 10 cm thick (with plain or interlocking joints) setting in cement mortar 1:6 all as specified.
M&L for 15 mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed.
M&L precast cement concrete type B-1, 1:2:4 (20mm graded aggregate) in landings, cover slabs (for manholes etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, setting in CM 1:6, complete all as specified and as directed.
M&L cement concrete grade type B0 1:2:4 (12.5 graded aggregate) 25 MM thick in Damp proof course to horizontal or vertical surfaces including necessary formwork all as specified and directed.
M&L concrete bed in 1:3:6 type C-2 (40 mm grade stone agg) to drain pipe of bore 150 mm including packing under and haunching against the sides of pipe after they laid and tested.
M&L Non-Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile excedding 0.11 sqm but not exceeding 0.18 sqm in floor over 15 mm screed bed or bedding layers in cement mortar 1:6 set and jointed in neat cement slurry and pointed in colour cement to match complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surfaces 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10 mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick / concrete surfaces of walls, finished even & fair without using extra cement all as specified.
M&L for 15 mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar (1:4) complete all as specified and as directed.
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 and n exc 11 Sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the 15 mm thick screed bed with CM (1:4) laying floor tiles complete all as specified and directed.
M&L for hardcore of gauge nexc 63 mm, deposited, spread and levelled in layers nex 15 cm thick watered and rammed to a true surface as specified and directed.
M&L for 75 mm PCC 1:2:4 type B-2 using 20 mm graded aggregate as plinth protection finished even and smooth with out using extra cement as specified and directed.
M&L forming contraction (Dummy) joints 50 mm deep x 10 mm wide for plinth protection & similar work, filled with sealing compound Grade 'A' in plinth protection as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape as reqd, incl cranking bending, spirally for hooping columns hooking ends and binding with and including mild steel wire not less than 0.9 mm dia all as specified.
M&L for mild steel TMT bars 6 mm dia to 8 mm dia and over upto incl 10 mm cut to length bent to shape as reqd as in stirrups and specified and directed.
M&L cement concrete type B1 1:2:4 (20mm aggregate) in foundation, including rafts, footings, foundation beams, plinth beams , bases for columns, etc basement slabs under reamed piles and mass concrete.
M&L cement concrete 1:2:4 type B1 (20mm graded aggregate) in beams, cantilievers, bressummers, lintles over 1.5 m span.
M&L form work for rough finished concrete surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and sofits (if any) of foundations and plinth beams and similar works verticals or to batter.
M&L form work for rough finished concrete surfaces to sides and soffits of floor or roof beam, beam haunchings, girders, bresummers, lintles, cantilevers, shelves including supports overhanging, etc also splays between floors and beams, etc.
M&L form work to soffits of suspended flat sabs such as roof slabs, floor slabs, landings and similar works (smooth finished flat surface of concrete) not exceeding 200 mm thick (Horizontal or sloping).
M&L form work to fair finshed edges of concrete flats, treads breaks in floors, window cills, concrete failings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide.
S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to FE-410-W (grade E-250) quality 'A' all as directed and specified.
M&L for pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensilestrength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.
M&L for pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensilestrength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.
M&L for preparation new steel surfaces and two coats of synthetic enamel paint on over a coat of red oxide primer Zinc Chrome as specified and directed.
S&F 2nd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue and pinned at joints as specified and directed.
S&F 35 mm thick second class hard wood plain framed panelled shutter (two panels) with lock rail and pannel or 9 mm BWP comerical ply or 12 mm venered particle board with comerical face venering on both faces. The size of rail and style as per IS-1003 part kilin seasoned as specified and directed.
S&F 2nd class hard wood 30 mm thick glazed and skelton shutters as shutters to windows open rebated and prepared to receive glass gauge etc (with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut or mitered beads for securing glass gauge etc sizes of members of shutters as spfd in SSR part I, section 8, clause 8.24 (a) as specified and directed.
S&F 3 mm figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq m in each pane all as specified and directed.
S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd-E 165 complete all as specified and as directed by the Engr-in-charge.
Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast, bed block and like complete all as specified and as directed by the Engr-in-charge.
S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples.
S&F 150 mm size alumimium anodised barrel tower bolt of extruded section and fixed.
S&F 150 mm size extruded alumimium handles fabricated type, anodised and fixed.
S&F 100 mm size medium wt butt hinges.
S&F 300 mm mild steel sliding door bolts plate type sove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate.
S&F PVC (SWR) 75 mm bore pipe single socketed in any length with rubber ring joints laid in trenches.
S&F PVC (SWR) 100 mm bore pipe single socketed in any length with rubber ring joints laid in trenches.
S&F Cl floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4, 100 mm dia.
S&F 110 mm bore PVC (SWR) bends (any radius).
S&F PVC (SWR) vent cowl 110 mm.
S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor as specified.
S&F stack clamp out of 25 mm x 5 mm flat iron stays including bolt and nuts and securing ends of stays to walls or roof for 50 mm bore piece.
S&F viterous China sqatting pan or orissa pattern 580 x 440 mm white with integral foot rest (excluding cistern) as specified and directed.
S&F sand cast iron 'P' or S trap 100 mm bore for indian type w/c.
S&F viterous China urinal half stall type white including CP spreader, waster pipe etc as specified and directed.
S&F viterous china wash hand basin flat back size 580 x 450 mm excluding traps, waste, chain, plug and porcelain stopper incl brackets as specified and directed.
S&F 10 liters capacity PVC valveless syphonic action type, flushing cistern (ISI marked) low level with inlet, ball valve, float bracket & flush pipe complete all as specified & directed.
S&F 32 mm dia waste cuppling of PTMT (Half or full threaded) 45 grams as specified and directed.
S&F PVC waste pipe 32 mm dia for wash hand basin as specified and directed.
S&F chromium plated soap dish any type fixed to plugs with brass screws as specified and directed.
S&F 15 mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule.
S&F 15 mm bore chromium plated angular stop cock with wall flange.
S&F PVC connection 15 mm bore with ptmt nuts of length 450 mm.
S&F 15 mm bore cast copper alloy with capstan head chromium plated pillar tap screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shank and fly nuts.
S&F 15 mm bore chromium plated Bib tap cast copper alloywith crutch or butterfly handle screwed dwon, screwed for iron pipe or for brass ferrule and fixed.
S&F in repairs Angle stop valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated with long shank and cup (concealed type), 15 mm bore dia of pipe fixed in repairs, complete all as directed by Engr-in-charge.
S&F polypropyene random copolymer concealed 20 mm pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass theaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge.
Ditto all as per above items No 74 but 25 mm bore pipe.
S&F 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule.
S&F 25mm bore brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity, hoisted and fixed in position all as specified in SSR Part-I
M&L for two coats cement base paint on newly plastered surfaces including preparation of surfaces.
M&L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick with grey cement and pigment jointed and pointed for screed bed or bedding layer of mortar 1:4:8 thick for laying floor finishes in neat cement slurry over 100 mm thick PCC type D2 (40 MM graded aggregate) in floors complete all as specified and directed.
M&L for preparation of new or previously untreated wooden surface any description of any description over 10 cm in width or girth and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and as directed complete all as specified and as directed.
M&L walling of random rubble uncoursed stone masonry, uncoursed well bonded laid dry in retaining wall abutment and similar work all as specified and directed.
M&L walling of random rubble stone masonry, uncoursed well bonded, bedded and solidly hearted, built in CM 1:6 all as specified and directed.
Supply only broken brick for loose filling of gauge 80 mm to 150 mm graded.
Demolition of cement concrete in ground floor and pavings n exc 15 cm thick below or above ground level complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (But not backing) and rubbish of premises complete all as directed.
Demolition of precast concrete block walling built in cement mortar including all quoins, arches, pillars etc all as specified and as directed.
Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc, complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n exc 1.5 sqm each complete all as directed by Engr-in-charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc 1.5 sqm and not exceeding 4 sqm each complete all as directed by Engr-in-charge.
Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed.
Demolition of reinforced cement concrete in any position not otherwise specifically provided for all as directed.
Taking down steel tubing 20 mm bore of pipe and connections in any position including cleaning for refixing or removal to store complete all as directed by Engr-in-charge.
S&F in repairs PP-R gate valves 20 mm dia (brass insert) as per requirement of the site as specified and directed.
S&F in repairs for wash basin, vitreous china, white, oval, size 630 x 450 mm including brackets & including cutting for and pinning in ends of brackets or errecting stand but excusive of fixing of supply and waste pipe as spfd and directed.
S&F in repairs vitreous china bowl urinal, flat back, size of 465 x 355 x 265 mm white with grating and union for discharge pipe and PTMT waste coupling with waste pipe (excluding flushing cistern, flush pipe and waste pipe).
Dismantling CI/PVC pipes of up to 100 mm bore with fitting as specified and directed.
PVC (SWR) 'S' trap of 125 / 110 mm bore as specified and directed.
S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid round or chamfered, put together with glue pinned at joints supplied and fixed complete all as directed by Engr-in-charge.
S&F 100 mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.
S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.
S&F 2nd class soft wood 30 mm thick glazed and skelton shutters as shutters to windows open rebated and prepared to receive glass gauge etc (with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut or mitered beads for securing glass gauge etc, sizes of members of shutters as spfd in SSR part I, section 8, clause 8.24 (a).
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site comlete all as specified and as directed by Engineer-in-charge.
S&F soild PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-charge.
S&F in repair 250 mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed.
M&L for preperation of new plastered wall surface of any description and applying three coat of white wash complete all as specified and as directed.
M&L for preperation of old plastered wall surface of any description and applying two coat of white wash complete all as specified and as directed.
S&F in repair 500 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.
Dismantling plain or corrugated steel / fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed.
S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs walls etc with grade of zine coating 275.
Dismantling wrought iron or mild steel work of any description not otherwise provided for as specified and directed.
S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (Cut to ordinary lengths i.e. within 20 mm of the length indicated) as specified and directed.
S&F CI floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4, 100 mm dia all as specified and directed.
M&L for treating wooden chowkats surface of any description n exc 10 cm in width or girth with black bituminus paint in two coats.
Preparation of new surfaces of steel of any description over 10 cm grith or width, not otherwise described with one coat of red oxide followed by two coats of synthetic enamel paint / camouflage painting.
S&F MS works as of angles or tees, fixed independently cut to shape drilled incl. bending and welding angles of grade 410-FE incl all as specified and directed.
M&L for framed work such as grills, gratings framed & hung/sliding as gates, including pintle hinges, stop, hard made sliding bolts, etc, with ends of bar shoulder & or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks, drain cover, wheel plui / rails etc & similar work conforming to Fe-290 Gde E-165.
S&F steel work in tubular truess including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 ST grade ST-240.
S&F MS Fe-290 (Gde E-165) quality-B plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases splices angle brackets cleats and other connections.
M/s Aman Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .