REPAIR AND IMPROVEMENTS TO AMMA UNAVAGAM AND DIVISION OFFICE CAMPUS AT LETTANGS ROAD IN DIV-99, U-23, Z-8

Dismantling R.C.C.works carefully clearing away the debris as directed during execution.

Dismantling the existing brick or stone masonry work in cement mortar under 3m high including carefully clearing the debris etc. complete.

Dismantling Floor finish and daddoing walls in cement mortar with mosaic tiles/glazed tiles/cuddapah slabs.

Dismantling Pressed tiles and weathering course.

Plain Cement concrete work 1:4:8 (1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 8 blue granite broken stone jelly 40mm gauge) including consolidation curing, etc. complete for foundation, etc. upto basement

Supplying, fabricating and placing in position Ribbed tor steel (RTS) for all RCC works as per design given including cost of steel and GI binding wire (18 G) in all floors etc., complete complying with standard specification (contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement for RCC column footings pintol blocks plinth beam staircase steps critical steps critical piers etc. using mild steel sheets of size 90x60cm and 10 gauge stiffened with welded mild steel angles of size25x25x3mm for boarding laid over silver Oak (country wood) joistsof size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cmcentre to centre etc. complete..

Providing and laying in position ,Standardised Concrete Mix M- 20 Grade in accordance with IS :456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and m,aximum water cement ration of 0.55, including admixture (Plasticiser/Superplasticier) in recommended proportions as per IS:9103 to accelerate ,retard setting of concrete,improve workability without impairing strength and durability with about (5.0 cum) 7730 kg of 20 mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of sand, nut excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators,finishing,curing,etc and providing complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standrands.(No separate payment will be made by the Department for the excess usage of materials)

Brick work using best quality II class table moulded chamber burnt bricks of size 9" X 4-1/2" X 3" in cement mortor 1:3 for foundation and basement including curing etc complete complying with standard specification

Providing and laying first quality Vertified tiles of all colours of size 605mmx605mmx9.6mm in cm 1:3 12mm thick including pointing with white cement. Labour Materials etc. (Relevent ISI std).

Supplying and paving second quality colour glazed tiles 30x20cm x 6 mm with relevent ISI STD size of approved make set in C.M. 1:3 (1 cement and 3 river sand) 20mm thick and pointing with same colour cement polishing clearing etc. complete..

Stainless Steel Handrail 900mm high Providing and fixing stainless steel handrail 900mm high (as shownin drawing) made out of stainless steel conforming to SS 304 with 8pct.to8.5pct. nickel using 50.8mm outer dia at top (with 1.6mm wall thickness) and 38.10mm(1.6mm wall thickness ) stainless steel pipe placed vertically at 1m centre to centre and two horizontal SS pipe 25.40mm outer dia (with 1.2mm wall thickness) welded at a distance of 300mm using TIG welding process with 308L SS electrode (in station building all flooor staircases) with necessary bends, flanges and base plates. Rate is inclusive of all materials, labours, lead, lift,etc. as directed by Engineer in-charge.

Paving the steps with CEMENT CONCRETE STEP TILES hydraulically pressed Anti skid steps tiles of 20mm thick in C.M.1:3, including pointing with colour cement etc, complet ( I.S.I std)

FALSE CEILING WITH GYPSUM PLAIN TILES Providing and fixing true horizontal level false ceiling using SAINT - GOBAIN GYPROC or Equivalent make with 24 mm Grid system using hot dipped galvanised Steel Section, exposed surface chemically cleaned caping prefinished in backed polyestar paint wall angle of size 24mmX24mm used in the periphery of the ceiling fixed to the wall partition R.C. Column bandwalls with the help of screws at 600mmc/c. Main runner of size 32X24mm suspended at 1200mm c/c max by using securely fixed to the structural soffit of R.C.C. slab by using 6mm Nylon Rawl plug at every 1200mm (Max) and 1200mm long Cross Tee of size 24X24mm to interlocked between Mainrunner at 600mm c/c (max) to form a grid of 1200mmX600mm. 600mm long Cross Tee of size 24X24mm is inserted to form a grid of 600mmX600mm and finally tiles laying with 12mm Gypsum plain Tiles (600mm x 600mm) and Painting with two coat of plastic emulsion paint over one coat of primer.

Solid panel PVC door with frame Solid PVC door shutters using 19 gauge 19mm MS sq..tubes for styles and outer frames. 15mm MS sq.tubes for top lock and bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mmx30mm. The over all size of top rail lock rail and bottom rail shall be 75mm x 30 mm. The over all size of frames shall be 50mmx45mm with suitable rabate for housing the shutter.including labour charges etc. complete.as per ISI standard.

Making and fixing M.S.Sheet gate of required size with twoshutters using necessary M.S.Flats 25x6mm M.S.Angles 50x50x6mmand M.S.Sheet 5mm thick (7gauge) providing gun metal caps 75mmsize pintols latches 25cm size for locking arrangements nameboards (C.M.) including cutting iron members welding fixing gatein position etc. complete as directed during execution.(Thedesign of gate furnished is subject to alteration duringexecution.) (ISI STD).

Supplying and fixing semi polished Cuddapah Slab 30mm thick over the existing base course including fixing the slab in cement mortar 1:6 ( 1 cement and 6 river sand) 20mm thick and pointing with cement mortar 1:3 ( 1 cement and 3 river sand) etc. complete..

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door:Providing and fixing casement dorrs fabricated form Un-Plasticized Polyvinyl Chloride (UPVC) sections. Profiles:The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm.The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash shold be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extructed seals. Hardware: All the hardware like friction stays,handles should be screwed with self tapping screws. The handless, licks should be designed so that they cannot be released from outside. Glazing:The window system should be glazed with 5 mm plain float glass / 6mm bison lam Installation:The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the palstered brick wall using self expanding nylon plug and driving MS electroplated screws into plug.

UPVC Window Specification: Supplying and fixing UPVC (Un- Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

Construction of Inspection chamber of size 60x60x60cm with necessary earth work excavation 40mm size brick jelly concretein C.M.1:4:10 ( 1 cement 4 river sand and 10 broken brick jelly)stock brick work in c.M.1:y (1 cement and 6 river sand) for 23cmthick wall benching channelling and plastering interior exterior and top with c.M.1:3 (1 cement and 3 riversand) 12mm thick and providing 7.5cm thick RCC loose slabcovering in CC 1:2:4 ( 1 Cement 2 river sand and 4 blue granitebroken stone jelly of 12mm to 20mm size) with necessary reinforcement and arrangements to lift for cleaning purpose etc. complete.

Providing and fixing 110mm dia PVC soil or vent pipe.with relevent ISI STD..

Supplying and fixing M.S.Grill gate of required size in twoshutters with necessary iron members gun metal cups and wheels75mm dia. with fittings locking arrangements etc. complete including painting a priming coat of approvedprimer etc. complete (The design of gate furnished is subject toalteration during execution.).

Roofing with galvanised corrugated iron sheets (thickness of sheet 0.8mm) including J bolts and nuts with bitumen washers etc. complete (ISI STD)..

Supplying and erecting in position LIGHT DUTY STEEL TRUSSES as per the drawing. The materials and design of the trusses should confirm to the relevant Indian Standard specification. The trusses shall be procured only from reputed manufactures of trusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design. The rate quoted shall include the cost of trusses. Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of red- oxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc., The roof sheeting shall project 0.762m from the eves purlins. For structures like CYCLE STAND, PARKING GARAGE, TEMPORARY ENCLOSERS

Supplying and fixing C.P.screw downtap of size 20mm

Supplying and fixing 15x10cm stoneware gully with P or S trapwith 15x15cm C.I.grating and 10cm dia S.W.bend including 40mm size brick jelly concrete in C.M.1:4:10 ( 1 cement 4 river sand and 10 broken brick jelly 40mm gauge) 10cm thick alround the gully 11cm thick wall with stock brick work in C.M.1:4 ( 1cement and 4 river sand) upto ground level and plastering with C.M.1:3 (1 cement and 3 river sand) 12mm thick for gully silt pit of size 15x15cm etc. complete.

Providing and fixing white glazed Eruopen water closet with rose wood seatings (black) low level flushing tank with all internal fittings including jointing the trap with soil pipe witProviding and fixing white glazed Eruopen water closet with rose wood seatings (black) low level flushing tank with all internal fittings including jointing the trap with soil pipe with cement making holes in the walls screws etc. complete as directed during execution.(ISI STD)

Supplying and fixing in position best Indian type water closet 51cm of superior quality and approved make white glazed earthernware with P or S trap and a pair of porcelin footrest and forming flooring alround water closet using 40mm size broken brick jelly concrete in C.C1:4:10(1 cement 4 river sand and 10broken brick jelly) and sand filling around the closet including finishing the surface with C.M.1:3 ( 1 cement and 3 river sand) 20mm thick including making good all the disturbed portions etc. complete.

Supplying and fixing white glazed earthern ware wash basin of size 55x40cm of approved make with a pair of G.I.brackets 15mm diaC.P.Pillar tap 32mm C.P.waste fittings with rubber plugs andC.P.chain 32mm 75cm long P.V.C.waste pipe with necessary union solder joint 90cm long with 15mm lead and brass connections with brass nuts and 15mm dia G.M.wheel valve and giving necessary connection etc. complete including cost of white lead teakwood plug screws rubber washers including painting two coats of approved make and colour paint over etc. complete. (wash basin should be got approved by the Buildings Engineer before use onworks).

Supplying and erecting SINTEX or approved equivalent make HDPE plastic vertical cylindrical 1000 Litre water storage tank, strickly adhering ISI standard as per ISI Mark 12701 (Latest revision) including all taxes and freight charges within Corpn.City Limit.

Supplying and Jointing 25mm dia PVC pipe.including cutting threading and jointing with necessary specials fixing towall with clamps and screws including making holes in the wall ordrilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc. complete.

Supplying and Jointing 20mm dia PVC pipe.including cutting threading and jointing with necessary specials fixing to wall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc. complete..

Painting new iron work two coats with ready mixed paint with relevent ISI STD of superior quality and approved colour..

Painting two coats with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty wherever required.(ISI STD).

Terrace concrete work with broken brick jelly 20mm gauge in pure slacked lime 32:12.5(32 broken brick jelly 20mm gauge and12.5 lime) over RCC roof slab for required depth of 80mm for giving required slope and thickness to roof as required well beaten with wooden beaters etc. complete as directed during execution..

Terrace flooring with one course of pressed tiles (with relevent ISI STD) 23cmx23cmx20mm using C.M. 1:3 etc. .

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4 points / Coil)

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with suitable Module GI switch box on wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open PVC conduit Plug point ( 8 points / Coil)

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 450mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Cost of supply of 18w 4 feet LED fitting with LED tube complete set (Patty and LED tube)

18W LED 3000K Square Type Recessed Fitting with LED

Plastering with cement mortar 1:4 (1 cement and 4 P sand)12mm thick including curing, etc., complete.

Earthwork Excavation And Deposting on Bank With Initial Lead of 10 m And Initial Lift of 2m In Hard Stiff Clay Stiff Black Hard Shales Muram Gravel Stoney Earth And Earth Mixed With Small Size Boulders And Hard Gravelly Soil (SS 20A)

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 (This Rate Is Applicable Only If Work Is Done During Night)

Providing And Laying In Position, Standarded Concrete Mix M-20 Grade In Accordance With Is:456-2954 Using 20mm Ond Down Graded Hard Broken Granito Stone Jelly For All Rcc Items of Works With Minimum Cement Content of 325 Kg/M3 And Maximum Water Cement Ratio of 0.55, Including Admixture (Plasticiser / Super Plasticiser) In Recommended Proportions As Per Is:9103 to accelerate, Retard Setting of Concrete, Improve Workabilly Without Impairing Strength And Durability With About (5 Cu.In.) 7730 Kg. of 20mm Machine Crushedstone Jelly And With About (3.3 Cum.) 5150 Kg. of 10-12mm Machine Crushed Stone Jelly And With About (4.79 Cu.m.) 7670 Kg. of Crushed Stone Sand (M Sand), But Excluding Cost of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing and including pumping charges Etc. And Providing Fixtures Like Fan Clamps In The Rcc Floor/ Roof Slabs Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And As Directed By The Departmental, Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements of Is Standards. (No Separate Payment Will Bemade By The Department For The Excess Usage of Materials)

Cost of Erection & Materials Required For 7 mtr Street Lamp Pole With Brackets Conventional Foundation(Material Ratio - 1:1.5:3)

I.SI.MARKED 2X25SQ.MM CABLE

HDPE PIPE OF SIZE 50 MM O.D X 38MM I.D

Supply of LED street light fitting of 150W-165W with 7 years replacement Warranty in place of 250W SVL with inbuilt Multi- Step Dimmable driver and other necessary components suitable for automated group street light monitoring system

Supply of One No of 7 mtr X 88.9 mm OD X 4.05 mm Thick Street Lamp Post With 1 mtr Single Straight Bracket, 1No. of 2 Core SMC Fuse Box With Hot Dip Zinc Galvanising

Supplying and fixing SS Name Board

Supplying and fixing Stainless steel Shink

Supplying and fixing Water purifier

Please Enable Macros to View BoQ information