Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.4 LAccepted-Finance | ₹9.4 L | L1 | Accepted-Finance FINANCIALLY ACCEPTED |
| 2 | L2₹9.5 L+₹9,263.96 (0.99%)Accepted-Finance | ₹9.5 L+₹9,263.96 (0.99%) | L2 | Accepted-Finance FINANCIALLY ACCEPTED |
| 3 | L3₹9.5 L+₹10,948.32 (1.17%)Accepted-Finance | ₹9.5 L+₹10,948.32 (1.17%) | L3 | Accepted-Finance FINANCIALLY ACCEPTED |
Tender Value
₹9.4 L
EMD Value
₹12,000
Closing Date
26 May 2026, 5:00 pmClosed
Executive Engineer Works Department ZP Ratnagiri
Dr.Babasaheb Ambedkar Bhavan Ground Floor Executive Engineer Works Department Ratnagiri ZP Ratnagiri
Constructing Anganwadi Building At Palu Tal Lanja For the year 2025
2026_RATNA_1299834_4
RZP/WD-Ratnagiri/E-Ten OPEN-03/2026-27
Open Tender
Civil Works - Buildings
Percentage
100 days
Lanja
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
₹12,000
4 Aug 2026
4 May 2026
29 May 2026
4 May 2026
26 May 2026
4 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Item No 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By Manual Means | 22.25 | cmt | 262.9 | ₹5,849.53 |
| 2 | Item No 2-Providing and laying Cast in situ/Ready Mix cement concrete M-10 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) | 5.21 | cmt | 6,951.43 | ₹36,216.95 |
| 3 | Item No 3 Providing laterite stone masonry in C. M. 1:6 in foundation & plinth including striking joints on the unexposed faces & watering complete.As per New Supplimentry | 22.4 | cmt | 7,338.89 | ₹1,64,391.14 |
| 4 | Item No 4 Providing laterite stone masonry in C. M. 1:6 in superstructure & plinth including striking joints on the unexposed faces & watering complete.As per New Supplimentry | 18.04 | cmt | 8,133.09 | ₹1,46,720.94 |
| 5 | Item No 5- Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. | 22.25 | cmt | 132 | ₹2,937 |
| 6 | Item No 6-Filling in plinth and floors with contractors material brought from outside and appproved in 15cm. to 20cm. Layers including watering and compacting etc. complete. | 6.89 | cmt | 1,077.82 | ₹7,426.18 |
| 7 | Item No 7 - Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. | 10.2 | Smt | 1,192.4 | ₹12,162.48 |
| 8 | Item No 8 Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. | 0.04 | cmt | 1,17,823.2 | ₹4,712.93 |
| 9 | Providing and fixing Country cut teak wood single leaf panelled door shutter without fanlight and 25mm thick as per drawing consisting of T.W. top rail size 100mm x 25mm and bottom lock rail 200mm x 25mm insert pannel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixture and fastening and T.W. beading to junctions of panelled inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. | 2.1 | Smt | 6,022.5 | ₹12,647.25 |
| 10 | Item No 10 Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. | 1.89 | Smt | 4,222.9 | ₹7,981.28 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.90 MB
B1palu.pdf
Tender Documents • 2.05 MB
BOQ_2232172.xls
BOQ • 0.33 MB
CORRIPALU.pdf
PDF • 0.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .