SPECIAL REPAIR TO BUILDING NO P-02 AND PROVN OF CERTAIN MINOR/REVENUE WORK AT BASOLI UNDER GE BASOLI

Amount

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense of soil complete all as specified and directed..

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed...

M&L PCC 1:4:8 type D-2 ( Using 40mm graded crushed stone aggregate ) in foundation filling and mass concrete and in sunken floor complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and directed.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as directing complete all as specified and directed .

M&L for M-20 Nominal mix as in beams, cantilevers, bressummers, lintels over 1.5m span (using 20mm graded crushed stone aggregate) complete all as specified and directed .

TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed .

All as per item No 07 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Form work to side and soffit of roof beam complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surfaces as in wall in cement mortar 1:4 finished surface even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished surface even and smooth without using extra cement including taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft / loose soil. complete all as specified and directed.

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L hardcore of broken stone or boulders. gauge n.exc 63mm, deposited spread and leveled in layers n.exc 15cm thick. Watered hand rammed to a true surface, complete all as specified and directed.

Taking down ,dismantling of broken/loose portion of chajja ,facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding complete all as specified and directed.

Cutting chases pinning in brick work for concealing water tubing and making good the surface as per existing surface complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 450x300mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10mm thick rendering in CM 1:4 and dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screeding in CM 1:4 over 25mm thick plain cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone agg) and dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Plain cement concrete 75mm thick 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub floor, sub base complete, all as specified and directed .

M&L for providing 75mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete, all as specified and directed.

Material and labour for Steel window factory made double shutter and tubular moulded frame of 16 gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and applying two coats synthetic enamel paint, over one shop coat of red oxide, zinc chrome primer complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) for filling in the pressed steel door frame/hold fast complete all as specified and directed..

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed .

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing complete all as specified and directed..

M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix in repair PVC board 20mm thick prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work etc complete all as specified and directed.

Supply and fixing for 35 mm thick Factory made 2nd class hard wood door shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitred beds for securing glass, etc.; The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.20 (a) complete all as specified and directed.

Supply and fix Factory made solid panel PVC door shutter 28 to 30mm thick (style) with 2,4 or 6 raised panel design with 2mm moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face with wood free EPS, complete all as specified and directed.

Supply and fix Factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed..

S&F 3mm thick frosted sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed..

S&FGalvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm, complete all as specified and directed..

S&F Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt,complete all as specified and directed..

S&F Extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size complete, all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised and fixed, 125 mm size complete, all as specified and directed.

S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate. complete all as specified and directed..

Supply and fix for 100mm size hasp and staple safety type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

Supply and fix for Mild steel sliding door bolts of size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section. complete all as specified and directed.

Supply and fix Continous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30mm complete all as specified and directed.

Supply and fix shelf of PTMT (medium weight 300 gm)fixed with and including CP brass screw and wooden/plastic cleats complete all as specified and directed.

Supply and fix for Decorative curtain rod with fixing brackets, stops, rollers etc complete all as specified and directed.

Supply and fix in repair Tubular towel rail, 20mm dia, D-type, 600mm long between flanges brass chromium plated fixed with rawl plug etc complete all as specified and directed.

Supply and fix for mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed.

Supply and fix steel ventilator with top hung shutter including hinges, peg stay etc complete all as specified and directed.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for applying three coats of white washing on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for preperation of new plastered surface of wall and applying two coat of cement base paint over a coat of primer, complete all as specified and directed.

M&L for preperation of old plastered surface of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for applying one coat of white washing on ceiling including preparation of old plastered surfaces complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coats of weather proof exterior emulsion paint complete all as specified and directed.

M&L for preperation of new plastered surface of wall and applying two coat of distemper oil emulison over and including a coat of 3mm thick wall care putty, complete all as specified and directed.

M&L for preperation of old plastered surface of wall and applying one coat of distemper oil emulison over and including a coat of 3mm thick wall care putty, complete all as specified and directed.

M&L for applying one coat of dry distemper on wall including preparation of old plastered surfaces complete all as specified and directed.

Supply and fix wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed.

Supply and fix in repair for Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm white , with integral foot rests, including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified.

Supply and fix 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve,32mm dia flush pipe, float and handle including connection to pipe complete all as specified and directed.

Supply and fix cast iron P or S trap complete all as specified and directed..

Supply and fix vitreous china wash hand basin white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed.

Supply and fix Chromium plated brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union,complete all as specified and directed.

Supply and fix in repair 15 mm dia bore Bib taps , cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified. complete all as specified and directed.

Supply and fix for 15mm dia bore Stop valve fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix for 20mm dia bore Stop valve fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix in repair for 15mm dia bore Stop valve concealed type,long shank cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Taking down steel water tubing of 15/20mm dia including all fittings complete all as specified and directed.

Supply and fix for steel water tubing galvanised, 15mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etc complete all as specified and directed.

Refixing for steel water tubing galvenised, 15 mm bore, in old or new position with all new fittings and fixed to walls, complete all as specified and directed.

Supply and fix for steel water tubing galvenised, 20 mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etccomplete all as specified and directed.

Refixing for steel water tubing galvenised, 20 mm bore, in old or new position with all new fittings and fixed to walls, complete all as specified and directed.

Dismantling water tank of capacity 500 litres to 1000 litres complete all as specified and directed.

Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe of 15mm bore complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.complete all as specified and directed.

Supply and fix sinks with drainage board made of stainless steel 1mm thick overall size 915mmx460mm bowl size 410mm x 330mm x160mm for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar connecting union to pipe, GI waste Pipe 32mm from sink to nahani trap of approved brand including cost of materials, adhesive solution, including coupling and with a pair of suitable C.I. brackets including painting the brackets with two coats of approved paint cutting holes in walls and making good the same etc. complete all as specified and directed.

S&F branch pieces, single (equal or unequal ) 75mm dia complete all as specified and directed

S&F branch pieces, single (equal or unequal ) 110mm dia complete all as specified and directed

S&F cast iron floor trap with grating suitable for 75mm dia outlet and jointing to waste pipe in cement concrete PCC 1:2:4 complete all as specified and directed

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall of 110mm dia complete all as specified and directed..

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joint laid in trenches or floor of 110mm dia complete all as specified and directed..

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall of 75mm dia complete all as specified and directed..

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joint laid in trenches or floor of 75mm dia complete all as specified and directed..

M&L for PVC (SWR) bend of any radius of 110mm bore complete all as specified and directed..

M&L for PVC (SWR) bend of any radius of 75mm bore complete all as specified and directed..

Supply and fix PVC(SWR) floor trap 75 mm, with grating including jointing with solvent cement complete all as specified and directed.

S&F "P" or "S" trap and fixed in position with 100/110 mm bore pipe complete all as specified and directed

Demolition of brick tiles or terracing tiles single layer on roof complete all as specified and directed.

Material and labour for roughening surfacesof old concrete of picking sweeping and washing down with water to remove dust etc including taking down tarfelt and brushing with neat cement slurry @ 3Kg of cement per sqm including 20mm thick screeding in CM 1:4 mixed with water proofing compound complete all as specified and directed by Engineer-in-Charge (WPC shall be measured & paid seperately)..

Material and labour for applying evenly one coat of bitumen primer on roof surface conforming to IS-3384 of 1986 @ 0.30 litres/sqm. and applying a layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.6 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with mineral gravel finish. The overlap shall be minimum 150mm on transverse direction and 100 mm on longitudinal direction and sealing overlap by torch application complete all as specified and directed by Engineer-in-Charge .

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for Machine cut kota stone slab fooring 20-22mm thick jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to obtain mirror finish complete all as specified and directed.

Material and labour for Machine cut kota stone slab skirting 16-18mm thick over and including 10mm thick rendering in cement mortar 1:3 for kota stone slab skirting in vertical surfaces and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to obtain mirror finish , complete all as specified and directed.

Siupply and fix for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe -290 Gde -E-165,complete all as specified and directed.

Material and labour for 40mm thick plain cement concrete type B-1 1:2:4 (using 20 mm graded crushed stone agg) as in floor finished even & smooth surface w/o using extra cement complete all as specified and directed by Engineer-in-Charge .

Material and labour for 40mm thick plain cement concrete type B-0 1:2:4 (using 12.50 mm graded crushed stone agg) as in damp proof course complete all as specified and directed by Engineer-in-Charge .

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out ,returning,filling in and ramming earth or broken rubble mixed with earth ,in layers n exc 25 cm ,watering and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil complete all as specified and directed.

Supply and fixing steel work in tubular trusses including columns purlin rafter etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. -240 and it is painted one coat of zinc chromate primer paint (including preparation of surface) as per directed

Supply and fix for MS Screw bolts machine made 5 mm to 10mm dia length exceeding 10 cm and n.exc 15 cm with hexazonal or sqrs heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexazonal of sequare nuts etc , complete all as specified and directed.

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding/Eaves board to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix for galvanised mild steel sheeting 0.80mm thick with two corrugation side laps fixed with coach screw and washers as in roof covering/cladding to wall, complete all as specified and directed.

Material and labour for Roof trusses (framed) ,trussed purlins, crane gantries , rails and fastenings and heavy bracket framing (beams, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe 410-W (Gde-E-250) quality -A complete all as specified and directed.

M&L Concrete bed to drain pipes including forming cradles, in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate), for 150mm dia pipe complete all as specified and directed..

. M&L Salt glazed stone ware (SGSW) grade 'A' pipes 150mm bore laid and jointed on concrete bed complete incl testing complete all as specified and directed.. (Concrete to be measured and paid for separately).

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100/150 mm internal dia of pipe complete all as specified and directed.

Supply and fix salt glazed stone ware gully traps, square or round mouthed, type 'P' of size 100 x 100 mm complete all as specified and directed..

Supply and fix stainless steel plate rack of size 915mmx 915mm including all necessary fixing arrangement complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for Point wiring with 1.5 Sqmm (nominal area)copper conductor FRLS cable (Multi stranded) PVC insulated and unsheathed in and including concealed PVC rigid non metallic conduit (ISI marked) with sunk cast iron/pressed steel terminal boxes of suitable size with 3mm thick plastic laminated sheet for light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed with colour code earth wire connected to common earth dolly complete all as specified. Note : (a) Unit rate include for cutting chases for conduit and sinking for boxes and making good to wall, floors etc. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

All as per item No 118 but for one 3 pin 5 Amp socket outlet on independent board complete all as specified and directed.

All as per item No 118 but for one 3 pin 5 Amp socket outlet on same board complete all as specified and directed.

All as per srl item No 118 but one bell/buzzer point controlled by one push button complete all as per specified and directed.

Material and labour for Point wiring with 2.5 Sqmm copper conductor FRLS cable (Multi stranded ) PVC insulated and unsheathed cable conductor in and including concealed PVC rigid non metalic concealed conduit (ISI marked) of suitable size with metal flush boxes of adequate size with cover plate for one 3 pin socket outlet 15 amps on independent board incl continuous 1.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed cable earth wire connected to common earth dolly complete all as specified. Note : Unit rate for cutting chases for conduit and sinking of boxes and making good to wall,floor ceiling complete all as specified and directed by Engineer in charge. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

Supply and fix Switch piano, flush type single pole, one way 5 Amp. complete all as specified and directed.

Supply and fix Switch Bell push, flush type, 5 amp complete all as specified and directed.

Supply and fix bell ding dong, 230 V complete all as specified & directed. complete all as specified and directed.

Supply and fix Socket outlet 2 in 1, 5 pin, 5A complete.complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 5 pin, 5 Amp flush type universal. complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 6 pin, 6 and 15 Amp flush type universal. complete all as specified and directed.

Supply and fix ceiling rose surface bakelite, two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

M&L for Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.

Supply and fix for stepped type electronic fan regulator flush type with 5 steps speed control complete all as specified and directed.

Material and labour for sub main wiring with two run of single core FRLS PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.00 Sqmm drawing into and including medium grade PVC non metallic rigid conduit of 20 mm dia and making electric connections including one run FRLS PVC insulated single core copper conductor cable 6.00 Sqmm as a earth continuity conductor(green colour), including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core FRLS PVC insulated copper conductor cable one run of 6.00 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Supply and fix for sheet metal powder enclosure powder coated versatile double door TPN, 415 Volt, 50 HZ, 4 way distribution board for MCB provisions fitted with copper bus bar rated 200 Amp, neutral link , complete all as specified and directed.

Supply and fix for sheet metal powder enclosure powder coated versatile double door SPN, 230 Volt, 50 HZ, 8 way distribution board for MCB provisions fitted with copper bus bar rated 200 Amp, neutral link , complete all as specified and directed.

Supply and fix in replacement LED tube light fitting 1 x 20 watt, 230v including tube rod with polycarbonate diffuser , of 4 feet ,complete with all accessories and pre-wired incl all necessary electric connection with three core copper cable 23/0.0076 complete all as specified and directed.

Supply and fix LED mirror fitting 1x10W, 230V including LED tube rod 2 feet batten fitting fixtures with, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size

Material and labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe with funnel with wire mesh at top, 15 mm bore light grade earth lead protection pipe upto main board with RCC cover suitable handle and angle iron frame for pit top and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include the cost of earthing wire and protection upto 7.5 metre length.)

Supply, installation, commissioning of Glass Top Deep Freezer single phase 240 volt, 50 Hz of capacity 320 Ltrs double door with all connected accessories complete all as specified and directed. Make: Blue star/ voltas/ shriram.

Supply installation, testing and commissioning of Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 volt with output voltage stabilized at 230 v with accuracy of + 2.5 % having display to input and output voltage of cap 1 KVA complete all as specified and directed.

Supply and fix water heater storage type, (geyser) electric, 5 star bee rating with stainless steel inner tank single phase 230 vols, 50 HZ capacity 25 Ltrs including cutting/chasing of hole for fixing with the help of 04 Nos anchor bolt of min dia 12mm and 150mm long and making surface good as per existing including 02 Nos PVC pipe connection suitable for hot water min length 69cm complete as specified and directed.

Supply and fix in repair for MCB SP 5 to 32 Amps with 10 KA breaking capacity complete all as per specified and directed.

Supply and fix in repair for MCB SPN 63 amps with 10KA breaking capacity complete all as per specified and directed.

Supply and fix in repair for MCB TPN 63 amps with 10KA breaking capacity complete all as per specified and directed.

Supply and fix exhaust fan 230 mm sweep with louver complete including making all arrangement for holes in brick / stone massonery wall of any thickness grouting of nuts / bolts in wall complete all as specified and directed

Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE, insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,16 Sq mm X 4.0 core cross section area including takingout existing cable complete all as specified and directed.

Supply and fix ceiling fan 1200 mm sweep including provision of fan hook on ceiling complete all as specified and directed

Supply and fix for DWC high densiy polyethylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laidalong pole/along wall/in PCC on GL/roof complete all as specified and directed.

Supply and fix LED bulk head fitting luminarie with opal diffuser including LED lamp 10watt LED 6000K lamp holder etc including, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Make : Crompton model No ICBH-10 or equivalent in Philips/ Bajaj/ Wipro.

M/S DUGGAL CONSTRUCTION CO

BALKRISHAN GUPTA AND SONS

M/S YASH PAUL RAINA AND CO

Nishikant Mahajan Govt Contractor