REPAIRS TO JOINERY, FLOORING, LEAKAGE/SEEPAGE AND ROOF SHEET IN TECH AREA AND COMPREHENSIVE MAINTENANCE OF AIR ENCLAVE AT AF STN BAMRAULI

Amount

Resecuring or easing & adjusting, without taking down, shutters of any description not exceeding 1 Sqm complete all as specified and directed.

Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed.

S&F in repair aluminium alloy, anodised, sliding door bolt 300 mm long ISI Marked , with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy completeall as specified and directed.

S&F in repair aluminium anodised barrel tower bolts of ISI Marked extruded section, 200 mm long complete all as specified and directed.

S&F in repair hasp and staple 100 mm size, safety type, aluminium anodised including bolt to hinge plate, fixed with screws complete all as specified and directed.

S&F in repair extruded aluminium alloy handles ISI Marked, fabricated type, anodised, 150 mm size complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane fixed with rubber beeding complete all as specified and directed.

S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed with rubber beeding complete all as specified and directed.

M&L for sheet glass ordinary quality 3.0 mm thick and glazing with oil putty not exe 0.50 sqm in each pane complete all as specified and directed.

S&F in repair fancy type glass corner shelf with CP brackets etc complete all as specifed and directed. Make : Jaquar Continental ACN-CHR-1173 Glass Shelf - (Wall Mounted) or equivalent in CERA/ Prayag as approved by GE.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. Make: Jaquar Kubix Prime AKP-CHR-35771P) or equivalent in CERA/ Prayag as approved by GE.

S&F in repair curtain rods 25 mm bore, mild steel, chromium plated with fixing brackets, stops, rollers, knobs/finials etc complete all as specified and directed.

M&L for repair for rubber bead/seal 40mm wide and 3-4mm thick to cover doors/window gap fixed with nails and make good to doors as in repair complete all as specified and directed.

Taking down existing aluminium windows exc. 1.50 Sqm and not exc. 2.0 Sqm and re-fixing the same after minor repairs etc. replacement of rubber beading and aluminium strips etc complete all as specified and directed.

S&F in repair floor door stopper 140mm, of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for tuck welding in repair not exceeding 2.5cm in length of metal n exc 6mm thick complete all as specified and directed.

M&L for running welding in repairs not exceeding 6mm thick of metal to be welded in existing items etc complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

S&F flush shutters 30 mm thick, solid core construction, with block board core and polished teak, ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel, 100mm size complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 250 mm long, ISI Marked with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section, 200 mm long complete all as specified and directed.

S&F in repair Mild steel wardrobe hooks 450 - 600 mm length, complete all as specified and directed.

S&F in repair 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed.

S&F in repair brass mortice lock, vertical type, size 100 mm, 4 levers complete all as specified and directed.

S&F 150mm size in repair 7 lever super night latch single bolt, fixed in inside side of door shutter complete all as specified and directed.

S&F 2 lever wardrobe lock,verticle type of 50mm in size complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sq. m each complete all as specified and as directed by the Engr-in-Charge

S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified and directed by the manufacturer and as per directions of Engr-in-Charge

S&F in Repair of 18 mm thick Celuka ply of prelaminated/ Rigid laminated of desired colour one side and other side plain colour fixed with screws/ solvent cement/adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets complete as per specifications and as directed complete all as specified and directed. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)

S&F in Repair of 18 mm thick Celuka ply one side prelam/rigid laminated and other side plain white colour to make kitchen cabinet Shutter/drawer front shutter complete as per specifications and as directed complete all as specified and directed. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)

S&F in repair venetian blinds vertical type, level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall complete all as specified and directed ( Make : Vista or equvalent as approved by GE).

S&F powder coated anodised aluminium frame/shutters for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F in repair for aluminium anodised window openable/fixed type/sliding type weighing not less than 1.35 Kg/RM including 5mm thick glass fixed with rubber gasket. The aluminium member of shutter is 65x40mm alongwith aluminium handle & tower bolt etc complete in all as specified and directed.

S&F in repair aluminium anodized grills with 6x5mm aluminium section having square gap of 100mm thick with 12-15mm fixing rails of channels complete all as specified and directed.

S&F in repair for aluminium anodized door (Partly paneled and partly glazed ) with 4.5 mm thick plain glass sheet and 12mm particle board interior grade both side laminated) and aluminium section weight not less than 0.55 kg/RM with self closing hydr4aulic door closer complete with all fitting complete all as specified and directed.

M&L for door with 12 mm thick plain / frosted toughned glass, rail, floor machine, handle with locking device with SS fixtures etc complete supplied and fixed at site including dismantling of existing doors

M&L for 12 mm thick plain / frosted toughned glass fixed type on opening and shelfs , partition including cutting and groving on wall with or without aluminium frame, rail, handle , lock with SS fixtures etc complete supplied and fixed at site including dismantling of existing doors/ with shutters, complete all as specified and directed

S&F Stainless steel concealed door closer/over head in floor mounted best quality suitable for door shutters complete all as specified and directed.

S&F in repair 32 mm dia PVC flush pipe for low level flushing cistern to pedestal/squatting pan including all fittings complete all as specified and directed.

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore, fancy type (minimum weight 105 gms) complete all as specified and directed.

S&F toilet paper holder (Make Jaquar or equivalent Jaquar cat no:AKP 35753 P as approved by Engr-in-Charge.

S&F in repair Angle cock / value cast copper alloy screwed down with high pressure with crutch or butterfly handle screwed with ends for iron pipe or uinon & fixed of 15 mm dia. MAKE : JUGUAR/CERA/ Prayag as approved

S&F in repair wash basin mixer 15mm bore all as specified (Make Jaquar/CERA/Prayag).

S&F in repair Hand jet health faucet 15 mm bore with all connected fittings.Make:- JAQUAR and equevilent to parryware,plumber,cera) as approved by Engr-in-Charge.

S&F in repair bib taps chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of bore 15mm complete (Make Jaquar/CERA/Prayag).

S&F in repair Towel rail 600mm all as specified (Make Jaquar or equivalent). Jaquar cat no:AKP 35711P or equivalent in CERA/ Prayag as approved by GE.

S&F in repair Towel ring all as specified (Make Jaquaror equivalent). Jaquar cat no: AKP 35721P or equivalent in CERA/ Prayag as approved by GE.

S&F in repair SOAP DISH holder all as specified (Make Jaquar . Jaquar cat no: AKP 35731P or equivalent in CERA/ Prayag as approved by GE.

S&F in repair Towel rack with lower hanger 600mm all as specified (Make Jaquar or equivalent). Jaquar cat no:AKP 35781P or equivalent in CERA/ Prayag as approved by GE.

S&F in repair SOAP dispenser with glass bottle holder all as specified (Make Jaquar or equivalent). Jaquar cat no:ACN-CHR-1135N or equivalent in CERA/ Prayag as approved by GE.

S&F in repair Tumbler holder all as specified (Make Jaquaror equivalent). Jaquar cat no: ACN-CHR-1141N or equivalent in CERA/ Prayag as approved by GE.

Repair only to CP long body bib taps , pillar tab etc of any make by replacing spindle,nippule ,washer etc at any size etc complete all as specified and directed.

S&F in repairs three way wall mixer with provision of over head shower with L bends connecting legs & wall flanges incl nipples complete all as specified and directed. (MAKE: JAQUAR or equivalent in CERA/ Prayag as approved by GE.)

S&F in repair 32 mm brass chrome finish bottle trap for Wash hand basin complete all as specified and directed. Make : Jaquar or equivalent in CERA/ Prayag as approved by GE.

Repair only to wall mixer of any make by replacing L-bends,connecting legs& spindle and, nipples etc completeall as specified and directed.

S&F in repair 150mm Brass Chrome Finish Square Maze Overhead Shower, OHS-1605 with swivel joints, fixed in repairs complete.MAKE: Jaquar or equivalent in CERA/ Prayag as approved by GE.

S&F in repair jet spray with flexible pipe and holding screw other fittings etc complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repair PVC waste pipe of 32mm dia suitable for WHB/kitchen sink complete all as specifed and directed.

S&F in repair Stainless steel plate rack of size 780x900x250mm fixed in repair complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 litres but not exceeding 500 litres and from mouth of circulating pipes, etc complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and from mouth of circulating pipes, etc complete all as specified and directed.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight 455 gms) complete all as specified and directed

S&F in repair PVC cover (Lid) for OHT of capacity 500 Ltr complete all as specified and directed.

S&F in repair PVC cover (Lid) for OHT of capacity 1000 Ltr complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Mild steel chromium plated grating 100 mm dia, fixed in repairs to Nahani traps complete all as specified and directed.

Mild steel chromium plated grating 125 mm dia, fixed in repairs to Nahani traps complete all as specified and directed.

S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F (in Repair) vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed. including plastic water closet seat cover closed pattern with flat bottom and mild steel chromiunm plated or aluminum hinging device.

S&F (in Repair) Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified including plastic water closet seat cover closed pattern with flat bottom and mild steel chromiunm plated or aluminum hinging device.

S&F in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of 'Cera' or equivalent model of make specified in Appendix 'F' to particular specifications.

S&F in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications. Note : Vitreous china wall hung wash hand basin cat Part No. CONCORD S2040112, Pedestal cat part No S2090107 & chromium plated brass centre hole basin mixer cat part No F2002461 of 'Cera' or equivalent model of make specified in Appendix 'F' to particular specifications.

S&F in repair shower pannel made of anti-finger print stainless steel body, in-built ABS top shower with 60 nozzles+ water fall, 2 movable ABS body top shower with 60 nozzles+water fall, 2 moveable ABS body massage Jet, head shower with flexible hose, shelf, brass faucet body with thermostat mixer and 40 cm stainless steel barbed hose, multifunction water diverter for top shower, 1.5cm stainless steel double locked flexible hoses complete all as specified and directed. Make : Jaguar Cat No. JPL-SSF-ST88158B or equvalent as approved by GE

S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed.

Removing and refixing of bottle trap from WHB after cleaning and removing all blockages etc. complete all as specified and directed.

S&F in Repairs PVC Syphon kit suitable for One piece WC Cistern complete all as specified and directed.

Resecurring of syphon kit by minor adjustment and replacement of syphon washer etc. complete all as specified and directed.

S&F in repair 32mm bore waste fittings of brass CP for glazed ware sinks,basin etc with long screwed shanks , and fly nut flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed.

M&L for preparation of old decorated plastered/unplastered surface of walls and applying one coat of plastic emulsion paint complete all as specified and directed.

M&L for complete removal of existing treatment and applying 1.5 mm thick wall care putty with two coat plastic emulsion paint complete all as specified and directed.

M&L for preparation of old surfaces of wall any type applying two coat of exterior emulsion paint over 1.5 mm thick putty ,using Mechanical means complete all as specified and directed.

M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) Using Mechanical means complete all as specified and directed.

M&L for Preparation of old treated wooden surface of any description over 10 cm width or girth and applying one coat of synthetic varnish using Mechanical means complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion , white or tinted over & including alkali-resistant cement primer Using Mechanical means complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted including a coat of cement wash with white cement Using Mechanical means complete all as specified and directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, applying two coats of distemper, oil emulsion white or tinted over and including one 2mm thick wall care putty Using Mechanical means complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion, white or tinted Using Mechanical means complete all as specified and directed.

All as per item No 101 but on ceiling complete all as specified and directed.

M&L for preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint Using Mechanical means complete all as specified and directed.

M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint Using Mechanical means complete all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar complete all as specified and directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Dismantling of stone slabs, and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing un-serviceable tiles to store and rubbish off the premises

M&L for 25mm thick plain cement concrete type B0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) as levelling course all as specified and as directed.

M&L for non skid Heavy duty Endura tile 400x400x12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in colored cement to match over and including 15mm thick screed in CM 1:4 complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cmx20cmx25mm thick set and jointed in neat cement slurry including 15 mm thick screed in CM(1:6) and pointed in white or colour cement to match with grey cement and no pigment complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises complete all as specified and directed.

M&L for Non Skid ceramic tiles coloured 300mmx300mmx 8 to 10 mm thick (square/ rectagular) area of each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc complete all as specified and directed.

M&L for Non Skid ceramic tiles coloured 8 to 10 mm thick(square/ rectagular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc complete all as specified and directed.

M&L for Non Skid ceramic tiles coloured 8 to 10 mm thick(square/ rectagular) area of each tile exceeding 0.11 Sqm but not exceeding 0.16 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc (1st quality/Premium Quality)

M&L for double charged Vitrified Ceramic coloured tiles of size of tiles exc .36 Sqm But Not Exc .42 Sqm in each tiles (square/ rectagular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tiles including 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.

All as per Item No 116 above but as in skirting set & jointed in neat slurry and pointed in white or colour cement to match the shade tile including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 450x 350x7 mm thick tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc complete all as specified and directed.

M&L for filling white cement on floor/wall tiles joints including removing old fillings etc complete all as specified and directed.

Demolition of un-reinforced concrete of any description and in any position complete all as specified and directed.

M&L for PCC 1:2:4 using 20mm graded aggregate as in PCC benching at junction of tiles , parapets and filling hollow section of pressed steel door frame of suitable size complete all as specified and directed.

Taking down PVC soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc. Complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete all as specified and directed.

S&F in repair 110mm PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repair 75mm PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repair 110mm PVC (SWR) junction single T equal or unequal with acccessible door complete all as specified and directed.

S&F in repair 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 75mm PVC (SWR) vent cowl complete all as specified and directed.

Supply and filling of rubber bead in all types of windows/ Ventilator in any gap/joint etc complete all as specified and directed.

M&L for taking down cement plaster on brick work or concrete surfaces incl racking out joints, hacking for key scrubbing down with water etc and rendering 10 mm thick in ready mix cement plaster 1: 4 on fair faces of brick masonary or concrete surfaces of walls mixed with water proofing compound (ISI Marked) @ 3% by weight of cement or as per manufacturer instructions, finished even and fair complete all as specified and directed after applying one coat of smart care damp guard/block 2K of Make :- Asian paints / Dr. Fixit or equivalent as approved by GE.

M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) Using Mechanical means complete all as specified and directed. (Paint shall be Apex Ultima of Asian Paints or make as approved)

Taking down alluminium door completely and refixing in the same opening after adjusting the floor spirng / adjusteing the screws for easy moving and making functional by changing rubber beading to glass/board all as specified and as directed

S&F in repair satinless steel plate rack of size 600x750x250mm weight not less than 7 kg each and all a directed complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, covering pivot made of brass, other made of mild steel heavy futy and fixed complete all as specified and directed

Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern all as specifed and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified and directed.

All as per item No 137 but plain sheet as in walls,ridfges etc complete all as specified and directed.

S&F trubo air Ventilator Industrial grade including polycarbonate transcluscent sheet over Hander Roof fixed in rapair completely above hanger roof as specification etc complete all as specified and as directed.

Removing and refixing trubo air Ventilator over Hander Roof including minor repair, oiling and greaseing fixed completely as specification etc complete all as specified and directed.

S&F Precast cement cement concrete louvers and jallies type BO 1:2:4 (12.5 mm Graded aggregate),25 mm thick (measured solid),including all mould-ings but excluding frames set in cement mortor 1:6 (precast frame shall be measureed separately all as specified and directed

M&L for steel work in tubular trusses including special shaped washers etc . Complete using ERW or induction butt welded tubes conforming toIS 1161 -1979 grade St 240

S&F frame work such as guard bars etc with ends of bars shouldered and or welded or forged into spikes etc and similar works conforming to Fe-310-0 .complete all as specified and directed.

M&L for plain cement concrete type B-0, 1:2:4 (12.5mm graded crushed stone aggregate) as in any position etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engr-in-Charge

S&F 2nd Hard wood, Plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue painted at joints.

S&F 35mm thick 1st class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats etc complete all as specified and directed

S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats including wire cloth etc complete all as specified and directed

S&F in new door Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S&F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc complete all as specified and directed

S&F 125mm size Butt hinges, extruded brass, with brass hinge pin, bright pol ished and fixed, type B-11 etc complete all as specified and directed

S&F 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and directed

S&F 150mm long floor door stopper of ,brass body and tongue with hard drawn steel spring fixed in floor etc complete all as specified and directed

S&F 150mm long Extruded brass handles, fabricated type polished etc complete all as specified and directed

S&F powder coated anodised aluminium frame partition including 5mm thick glass with door shutters with rubber gasket, joining cleat for fixing etc complete all as specified and directed.

S&F Mortice lock, brass 4 lever vertical type, size 65 mm etc complete all as specified and directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for double charged Vitrified Ceramic coloured tiles of size of tiles exc 0..42 Sqm But Not Exc 1.0 Sqm in each tiles (square/ rectagular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tiles including 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.

All as per Item No 159 above but as in skirting set & jointed in neat slurry and pointed in white or colour cement to match the shade tile including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for Glazed ceramic coloured tiles size 600mm x 300mm x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete all as specified and directed.

S&F in repair vitreous china counter wash hand basin snow white miniumum size 560mmx470mm fixed in grante slab including angle iron brackets below granite slabs & chromium plated brass coupling, complete all as specified in particular specifications. Make : Jaquar/parryware or equivalent as per Appx 'F'.

S&F in repairs bottle trap with necessary assembly etc complete all as specified and directed.

S&Fin repairs chromium plated brass centre hole hot and cold mixer fixed in wash hand basin etc complete all as specifed and directed. Make : Jaquar / Parryware or CERA

S&F in repairs PVC braided connection, complete all as specified and directed. Make : Jaquar

S&F in repairs Toughned glass as in hinged / sliding doors, partitions automatic doors and similar work including cutting to shape, drilling holes and reqd fixing accessories like clamps cleat, fixing channel / Rod & Handle for door required etc complete all as specified and directed

S&F in repairs two way bib taps chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of bore 15mm complete all as specified and directed. Make : Jaquar

S&F in repairs long neck bib tap etc Make : Jaquar

Taking down existing aluminium windows/door/partition and re-fixing the same after minor repairs replacement of rubber beading , aluminium strips and windows shutter side locking arrangement etc complete all as specified and directed.

Dismantling boarding, like wall paneling or false ceiling in any description, fixed in any position with nails

S&F 605mm x 605mm size anodised aluminium snap grid frame work for false ceiling all as specified and directed.

Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F 12mm thickness gipsum board pannel including aluminium false ceinling snap grid frame work size 605 x 605 mm with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. etc all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing duly fitted into the wall etc all as specified and directed

S&F Solar control film 50 micron reflective type sticked to glass panels as per manufacturer’s instructions complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging of Fe-410-W(Gde-E250 quality B) also fastening and fixing complete all as specified and directed.

M&L for fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F Fibre glass reinforced translucent sheeting plain/corrugated fixed with coach screw and washer in roof, wall etc

S&F of 150mm wide for frames for fishing of shutters with 36 mm thick (18mm thick back to back sticked) Celuka ply of prelaminated/ Rigid laminated of desired colour one side and other side plain colour fixed with screws , solvent cement/adhesive to make wall mounted kitchen cabinet back and pull out drawer sides incl taking down of old unserviceable board complete as per specifications and as directed. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)

S&F in repair stainless steel (Grade S-304) basket (plain) of minimum size 50cm x 37cm x 10cm made of 4mm minimum dia S.S.Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and directed.

S&F in repair stainless steel (Grade S-304) thali basket (11-13 division) of minimum size 50cm x 37cm x 20cm made of 4mm minium S.S.Wire approved quality with suitable arrangement for fixing telescope basket Channel complete all as specified and directed.

S&F in repair stainless steel (Grade S-304) plate basket (11-13 division) of minimum size 50cm x 37cm x 16cm made of 4mm minimum dia S.S.Wire approved quality with suitable arrangement for fixing telescope Channel complete all as specified and directed.

S&F in repair stainless steel (Grade S-304) Partition basket of minimum size 50cm x 37cm x 16cm made of 4mm minimum thick S.S.Wire approved quality with suitable arrangement for fixing Telescope channel complete all as specified and directed..

S&F in repair stainless steel (grade S-304) Cutlary basket of minimum size 50cm x 37cm x 10cm made of 4mm minimum dia S.S.Wire and bottom of S S Perforated sheet approved quality with suitable arrangement for fixing Telescope channel complete all as specified and directed.

S&F in repair stainless steel (grade S-304) basket (plain) of minimum size 50cm x 37cm x 16cm made of minimum 4mm dia S.S.Wire approved quality with suitable arrangement for fixing telescope Channel complete all as specified and directed.

S&F in repair stainless steel (Grade S-304) bottle pullout of minimum size 50cm x 40cm x 16cm in two tier made of 4mm minimum dia S.S.Wire approved quality with suitable arrangement for fixing telescope Channel complete all as specified and directed.

S&F in repair stainless steel (Grade S-304) ball bearing telescope channel 20'' length (full extension mechanism) complete all as specified and directed.

S&F in repair Autocut Hydraulic (soft closing) stainless steel hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed.

S&F in repair 75 mm dia oval shape SS handle fancy type polished bright finish for kitchen cabinet shutter complete all as specified and directed.

S&F in repair 150 mm dia oval shape SS handle fancy type polished bright finish for kitchen cabinet shutter complete all as specified and directed.

M&L for preparation of old decorated plastered/unplastered surface of walls and applying one coat of plastic emulsion paint complete all as specified and directed. Make Asian paint Royale.Glitz

M&L for preparing old plastered or unplastered surfaces of walls and applying one coats of cement paint white or tinted Using Mechanical means complete all as specified and directed.

S&F in repair Toilet paper Holder fixing to wall complete all as specified and directed. Make:-Jaquar Cat No.ACN-1151N or equivalent of makes as specified in the list of makes.

S&F in repair Towel Rack 600 mm long with lower Hangers complete all as specified and directed. Make:-Jaquar Cat No.ACN-1181N or equivalent of makes as specified in the list of makes.

S&F in repair Towel Rail 600 mm long complete all as specified and directed. Make:Jaquar Cat No.ACN-1111NM or equivalent of makes as specified in the list of makes.

S&F (in Repair) Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device. Make: CERA cat No. S1013119 or equivalent approved makes given under list of makes.

S&F in repair Angle cock, 2 way, with wall flange 15 mm dia including fixing to pipe, fixed in repair, complete all as specified and directed. Make :- Prayag cat no. 6711, techno-commercially equivalent model in Jaquar or Cera.

Stainless steel plate rack / utensils rack of size 900mm x 1200mm x 300mm depth made out ot 0.63mm thick stainlesss steel sheet, fixed to wall with brass screws including provision of necessary fittings / fixtures viz., nuts, bolts and washers of suitable size, the plate shall conform to the sample kept in sample room of, complete all as specified and directed. Make:- Prayg Cat NoP-350 or techno-commercially equivalent model in Prayag or Cera.

M&L for water proofing treatment for existing sunken portion by complete demolition of existing leakage sunken portion area exc 1 Sqm but n. exc 2.0 Sqm and cleaning the surface and applying cement slurry and 10 mm thick cement plaster in CM 1:3 mixing with liquid water proofing compound after surface is fully dried, cleaned free from dust and painting with a coat of bituminous primer @ 0.3 liter / Sqm after primer the entire surface, applying with hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2Kg / Sqm, over hot bitumen, providing polymeric water proofing membrance consisting of 90 to 100 micron thick central core of HMHDPE fill with standard weight not less than 3 Kg/Sqm provide with 100mm side lap/end lap after that fixing P trap and filling sunken portion in PCC 1:5:10 type E-2 appox 30cm high and PCC 1:2:4 type B-1 using 20mm graded stone aggregate incl provide spout of 40 mm bore GI pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc complete all as specified and directed. Note : (i) Rate quoted by the contractor shall deemed to be included for testing of treatment as directed by Engr-in-Charge.

S&F rotational moulded polythene water storage tanks, hoisted and fixed in position 500 ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia,Nippule complete all as specified and directed including Dismantling of old PVC tank and removing to store

S&F rotational moulded polythene water storage tanks, hoisted and fixed in position 1000 ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia,Nippule complete all as specified and directed including Dismantling of old PVC tank and removing to store

S&F in repair 15 mm bore fancy type health faucet with SS hose complete all as specified. Make:- Cera Cat Part No F 8030106AB or Equivalent of JAQUAR/ESS ESS

S&F in repair CP Tumbler Holder all as per specified and directed. Make:- Cera Cat Part No F 5007107 or Equivalent of JAQUAR/ESS ESS

S&F in repair CP soap dish all as per specified and directed. Make:- Cera Cat Part No F 5003106SS/CA 306 or Equivalent of JAQUAR/ESS ESS

S&F in repair 15 mm bore overhead shower 250 mm dia single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long(light weight) round shape with wall flange complete all as specified & directed. Make:- Cera Cat Part No F 7010503AB or Equivalent of JAQUAR/ESS ESS

S&F in repairs fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lattered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of size 15mm dia iron pipe all as specified Make: Cera/Catalogue No-F1005451CH

S&F in repair 15 mm bore fancy type bib taps long body (two in one) cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule. Make:- Cera Cat Part No F 1015163 or Equivalent of JAQUAR/ESS ESS

S&F in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule. Make:- Cera Cat Part No F 1015151 or Equivalent of JAQUAR/ESS ESS

S&F in repair for 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower(with bush and piston Divertor fittings) with aerator complete all as specified and directed. Make:- Cera Cat Part No F 1015401 or Equivalent of JAQUAR/ESS ESS

Taking down existing wall finishes any type by vigorously wire brushing, brooming dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign materials making good minor cracks etc in cement mortar 1:3 and applying putty 2 kg per sqm (Birla putty) on thesurface with uniform thickness making surface absolutely smooth & applying two or more coat of texturefinish paint as per design approved or tinted over priming the surface with al-kali resistance priming paint complete all as specified and directed. Make - 1 Nerolac 2 Berger Paints 3 ICI India 4 Asian Paints Note : ( i ) The site will be handover to the contractor in piecemeal . (ii) if any complain will not be done in justfied time not more than 24 hours by the contrctor then a suitable amount will be deducted from RAR / Final bill decided by GE.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M.R. ENTERPRISES (BID ID -3305195)

bharat construction (BID ID -3304977)

R K CONSTRUCTION COMPANY (BID ID -3305488)