REPAIR AND MAINT OF OTM MD ACCN OF INF BN I AT MIL STN SHAHJAHANPUR UNDER GE EAST BAREILLY

Amount

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L rendering 10mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth complete all as specified and directed.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth complete all as specified and directed.

M&L rendering 5mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finished the surface even and smooth complete all as specified and directed.

M&L for two coats of cement base paint incl preparation of new surface of wall complete all as specified and as directed.

M&L for two coats of cement base paint incl preparation of old decorated surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed.

M&L for 1mm thick JK Wall putty on wall complete all as specified and directed.

M&L three coat of white wash on wall including preparation of new plastered surface and complete all as specified and directed.

M&L three coat of white wash on ceilling including preparation of new plastered surface and complete all as specified and directed.

M&L preparing Old plastered or unplastered surfaces of wall and applying one coat of white wash on old decorated surface of wall complete all as specfied and direcetd.

M&L preparing Old plastered or unplastered surfaces of ceiling and applying one coat of white wash on old decorated surface of ceiling complete all as specfied and direcetd.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed..

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F, 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 complete all as specified and directed.

S&F, 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqmeach complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each etc complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each etc complete all as specified and directed.

Refixing of shutter in the same of opening after minor repair complete all as specified and directed.

S&F alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 80x44x1.98mm thick with rawl plug (b) Middle and lock rail : 150x44x1.98mm thick (c) Bottom rail : 150x44x1.98mm thick (d) Top rail/sype : 85x44x1.98mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper, hydraulically regulated door closer ( Make Sandhu ISI marked or ites equivalent approved make) (g) Making good of wall surface to match with existing surface complete all as specified and directed.

S&F aluminium anodised sliding windows ,shutter glazing with and including 4.8 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips , frame, with duco pattern grill of size 75 mm X 75 mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slids . Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F aluminium anodised windows,ventiletators frame with side hung shutters and glazing with and including 3.8 mm thick tinted glass fixed with rubber gasket with aluminium beading ,clips, frame made with aluminium section as appended below (i) Frame :65X40X1.98 mm thick (ii) Top/bottom rail and style /rail of shutter : 44X47X1.98 mm thick (iii) Aluminium beading - 0.7 mm thick (iv) Aluminium fitting such as peg stay,aluminium hinges,aluminium handle 100 mm long,aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed

S & F Mild steel work as in chowkats/frame of door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel , sheeting or other covering , running rails and guisides ) and hanging also fastening and fixing complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed..

S & F 300 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 16mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F 2nd class hard wood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass , gauze etc (without sash bars) , edges of framing plain , chamfered or rounded , fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.25 , supplied and fitted to chowkats complete all as specified and directed.. (Note: Wire gauge shall be measured and paid separately as Supply only)

Dismantling boarding any size and description fixed in any position with nails complete all as specified and directed.

S&F 20mm thick boarding with nails as in cub board shelves in any situation planed one side with butt joints complete all as specified and as direcetd.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both isides.complete all as specified and as direcetd.

S&F hasp and staple 150mm long safety type aluminium anodised with mild steel hing pin including bolt to hing plate and fixed with screws complete all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 150 mm long mild steel pressed handles oval type stove enamlled black complete all as specified and directed.

S&F 200 mm long mild Barrel tower bolt, oval type stove enamlled black with bright bolt and fixed complete all as specified and directed.

M & L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down steel/wooden window of any size and description complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed..(Note: Wire Glass/gauge shall be measured and paid separately as Supply only)

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed..(Note:Glass/ Wire gauge shall be measured and paid separately as Supply only)

S&F steel ventilator with top hang shutter including hinges steel pag complete all as specified and directed.(Note: Wire gauge shall be measured and paid separately as Supply only)

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and similar work conforming to Fe410 complete all as specified and directed.

Supply 3 only mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

Supply only 4.8mm thick frosted sheet glass complete all as specified and directed..

Supply only galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

S&F 0.80 mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks , water troughs, ducts,urinal trough and funnels etc , cut to size,edge beaded if directed, holes punched , including round headed screws,clout nails or rivets and fixed to wood or steel members, etc with plain 40 mm lap joints or welded /riveted seams including bending, turning up,mitred angles, stopped ends, outlets etc as required complete all as specified and directed.

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete all as specified and directed.

Supply and fix in repairs galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

Hacking out old broken glass of(any thickness,size,quality or description) from old wooden/steel frame and M&L 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed.

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and direcetd.

Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for complete all as specified and directed.

M&L for cement concrete (1:5:10) type E-2 as in foundation filling and mass concrete complete all as specified and directed.

M&L for preparation of sunken floor and applying a coat of hot bituminous primer @ .30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane n exc 3mm thick(weight not less than 3 kg/sqm ) consisting 100 mm micron HMHDE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where required over including M&L 10 mm thick rendering in CM 1:4 including integral waterproofing compound 3% and taking down existing plastering as per manufacturer instruction and complete all as specified and directed

Removing existing water proofing treatment and preparing surfaces to the entire satisfaction of Engineer-in-Charge / GE including taking down existing plaster, cleaning of all foreign material such as grass, roots, dust etc and roughening the concrete surfaces by wire brushing and washing down to remove dust etc. flushing at junction of parapets complete and removing the same to the places where directed.

M&L for screading 15mm thick on roof surfaces in CM 1:4 complete all as specified and direcetd.

M&L for preparation of roof surfaces, applying a coat of primer@ 0.40Kgs/sqm applying a coat of bitumen grade 85/25 @1.2kg/sqm supplying and laying water proofing treatment with using polymeric water proofing membrane n exc 3mm thick (weight not less then 3kg/Sqm) consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 grade @ 1.2kg per sqm on top surface of membrane and torch application of membrane with 10cm overlap where required and finally finished with and including a coat of aluminium paint @0.20Ltr/Sqm as per manufacture instruction complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 300 mm x 200 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including M&L 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including M&L 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in floor etc including M&L 15 mm thick screed bed in CM mortar 1:6 set and joited with neat cement slurry and pointed in coloured cement inclu to match coloured tiles complete all as specified and as directed.

M&L providing non- skid glazed joint free ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in dado/skirting etc including 10 mm thick screed bed in CM mortar 1:4 set and joited with neat cement slurry and pointed in coloured cement inclu to match coloured tiles complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl M&L 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and M&L incl 10mm thick screed bed in CM 1:4 complete complete all as specified and as directed.

M&L for 22 mm thick rubber moulded chequered cement concrete coloured tiles area of each tile exc 0.06 sqm but n.exc 0.12 Sqm , set & jointed in neat cement slurry and pointed with cement & pigment to match the shase of tiles in floors over and incl 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

Supply only plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F for CP Health Faucet with 1 Meter Flexible tube & Hook complete all as specified an directed.

S&F in repair toilet paper holder box type coloured of vitreous china fixed to wall with chromium plated (CP) brass screw complete as specified and directed

S&F in repairs 15mm bore two way angle valve, cast copper alloy, chromium plated screwed down, high pressure with crutch or butterfly handle complete all as specified and directed.

S&F Jet spray chromium plated with 1mtr heavy PVC hose butterfly type, with chromium plated nuts complete all as specified and directed.

S&F PVC bathroom cabinet standard quality and size 432x311mm complete all as specified and directed.

Disconnecting existing PVC water tanks of any size and any pattern, setting aside (or lowering if required) for repairs, cleaning with bleaching powder, etc and hoisting if required reconnecting and refixing in same position as complete all as specified and directed.

S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe complete all as specified and directed. (excluding flushing cistern, flush pipe and waste pipe)

S&F for 0.63mm thick plain, galvanised, mild steel sheeting, in crumple section joints, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

Taking down old 110/75 mm bore PVC(SWR) pipes in any position complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 75 mm bore. PVC (SWR) bends complete all as specified and directed.

S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified and directed.

S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and directed..

S&F 110 mm PVC (SWR) bend any radius complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches acomplete all as specified and directed.

Taking up or down existing GI Tubing15 mm bore & connections including cleaning for refixing or removal to store complete all as specified and directed.

All as per item no 89 above but 20 mm bore complete all as specified and directed.

S&F, GI tube 15 mm bore medium grade with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed..

Refixing only GI tube 15mm bore medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall complete all as specified and directed.

S&F, GI tube 20 mm bore medium grade with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed..

Refixing only GI tube 20mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plug , washer and wastes , including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).complete all as specified and directed.

S&F (in repairs) Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed..

S&F (in repairs) angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair swivel shower rose of PTMT any colour for fixing with 15mm pipe fixed complete all as specified and directed. (Minimum wt 40 Gms)

S&F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed complete all as specified and directed.

Dismantling of existing water tanks capacity n exc 500 ltr and removing to store complete all as specified and directed.

Dismantling of existing water tanks capacity exc 500 ltr n exc 1000Lts and removing to store complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity three layers ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed.

S&F rotational moulded polethylene water tank of 1000 ltrs capacity three layers ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed.

S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed.

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed.

S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and directed.

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe complete all as specified and directed.

S&F in repairs 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

S&F in repairs brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed of 15mm dia pipe complete all as specified and directed..

S&F in repairs 150mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed..

S&F in repairs 150mm long aluminium anodised handles cast type anodised complete all as specified and directed..

S&F in repairs floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floor , overall length of cover plate 150mm complete all as specified and directed..

Welding in repairs exc 2.5 cm but n exc 5 cm in length , thickness of metal to be welded n exc 6mm complete all as specified and directed..

Supply only 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed..

S&F PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified complete all as specified and directed..

S&F in repair 15mm bore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms) complete all as specified and directed..

S & F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair CP towel rail 20mm dia, 450 mm long between flanges complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor for pavings n.exc 15cm thickness complete all as specified and directed. (below are above ground level)

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate laid in panel finished even and smooth with using extra cement as in flooring complete all as specified and directed (Note: .glass dividing strip shall be mewssured and paid separately as Supply only)

Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and direcetd.

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in surface channels and base of drains complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc complete all as specified and directed..

M&L for machine cut mirror polish kota stone slab flooring20-25mm thich over and including M&L 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing complete all as specified and directed.

M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers over and including M&L10mm thick rendering in CM 1:4 including rubbing and polishing complete all as specified and directed.

M&L for granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types complete all as specified and directed..

M&L for 20 mm thick granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed

Dismantling Asbestos Cement/CGI (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified & directed.

M&L 6mm thick Asbestos Cement, one piece plain angular ridge in roof fixed with L Type or J type or crancked hook bolt etc complete all as specified and directed.

M&L 6mm thick Asbestos Cement, Corrugated or Semi corrugated sheets in roof, wall fixed with L Type or J type or crancked hook bolt etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws to steel frame work, complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 12 mm thick accoustic perforated tiles fixed or laid/inserted to GI frame work of grid size 605x605mm as in false ceiling all as specified, including Hangers 6 mm dia GI (upto 1200 mm in length) adjusting levels fixed to roof slabs by cieling cleats made of GI flat 40 x 3 mm size 60 mm long complete all as specified and directed.

S&F in repair fancy type curtain rod MS conduit rod PVC coated including fancy nob and ms bracket for hangging curtain rod complete all as specified and directed

S&F in repair 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer etc complete all as specified and directed

S&F in repair Aluminium Mortice lock 4 lever , size 75mm complete all as specified and directed.

S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 3, universal type, suitable foor door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 2, universal type, suitable foor door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regualted made up of minimmum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F partition wall of anodised aluminium hollow section members of size 63.50 mmX38mmX3mm thick with distance of vertical hollow section 1.0 m to 1.2 m and 1.0 mtr height wall having top rails,bottom rails and middle rail of size 63.50mmX38mmX3mm and upto middle rail wall panels shall be covered by 12 mm thick pre laminated particle board, interior grade both side with decorative choice laminations fixed into the wall with aluminium clip and bolt from middle rail to top rail panels shall be covered with 5.5 mm thick tinted glass fixed with aluminium strips/beadings with rubber gasket, sketch plan of wall as per existing or as provided complete all as specified and directed

Taking down aluminium door/windows of any size and description and repair/replacement of parts such as beading, rubber gasket , floor spring , mortice lock etc and refixing in the same opening complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.Note :- Tenderer may note that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract

S.M. KAZIM

M/S MANSI TRADERS

M/S DEEN ENTERPRISES

m/s udit constructions