REPAIR/ MAINTENANCE OF BOREWELL INCLUDING REDEVELOPMENT, REPLACEMENT OF MS COLUMN PIPE CLEANING/ MAINT/ PAINTING OF OVERHEAD RCC TANKS UNDERGROUND SUMP AND OTHER ALLIED WORKS IN AREA OF AGE E/M WS UNDER GE (W) JABALPUR

Amount

Cleaning and removing all silt, dirt, mud, etc. from inside the tank and from mouth of inlet/ outlet pipe and disposal of the same to a distance not exc. 50 m, and applying one coat of white wash on internal surfaces including preparation of old/wet surface and sign writing with white enamelled paint on black background (height of letters minimum 7.50 cm) on column showing capacity of tank and date of cleaning complete for the following s Rl No :- Note Mechanized cleaning and disinfection of Water Storage Tank : 1. Mechanized Dewatering of water storage tank. 2.Removal of sluge lying on the bottom ofwater storage tank through special sludge pumps. 3.Cleaning of internal walls of water storage tank through High Pressure rotary Jets 4.Vaccum cleaning of the floor of water storage tank through industrial vaccum cleaners. 5.Spray of H2 O2 inside the tanks as an antibecterial agent. 6. UV radiation of the tank. 7.Spray of bleaching powder in prescribed quantity after final cleaning of the tank. Note : Cleaning shall be done in two phase first cleaning shall be done in for all the overhead tank within one month of comencement of work and second cleaning shall be done after six month of first cleaning of date. 7.Spray of bleaching powder in prescribed quantity after final cleaning of the tank. 8. Remove Honey bee from OHT Note :- 1. height of overhead tank is almost 21 Mtr 2. The Cost of transportation such as Vehicle, T&P and Man power, etc deemed to in this job 3 . it shall be prime responsibility of the contrctor to provide all necessry safety arrangements like safety belts, ropes, helmets, netting etc to all workers for their safety at working site for work at any height and during working hours, if any mishaps/ casualty happened, contractor shall be responsible for any compensation to workers or any other liability . contractor quoted rates shall be deemed to be inclusive all these aspects

More than 01 lakh gallons capacity OHTs & less than 3.5 akh gallons OHTs

01 lakh gallons capacity OHTs

0.5 lakh gallons capacity OHTs

Below 0.5 lakh gallons capacity OHTs

Cleaning and removing all silt, dirt and mud etc from inside / outside the reservoirs sump and from mouth of inlet/outlet pipe and disposal of the same to a distance not exceeding 50 m and applying one coat of white wash on internal surfaces including preparation of old/wet surfaces and sign writing on wall surface out side with white enamelled paint (height of letters minimum 7.5 cm) on black enamelled paint back ground surface for the following :- Note Mechanized cleaning and disinfection of Water Storage Tank : 1. Mechanized Dewatering of water storage tank. 2.Removal of sluge laying on the bottom ofwater storage tank through special sludge pumps. 3.Cleaning of internal walls of water storage tank through High Pressure rotary Jets 4.Vaccum cleaning of the floor of water storage tank through industrial vaccum cleaners. 5.Spray of H2 O2 inside the tanks as an antibecterial agent. 6. UV radiation of the tank. 7.Spray of bleaching powder in prescribed quantity after final cleaning of the tank.

(a) 10 lakh gallons capacity under ground sump having 2 cum silt (approx).

(b) 5 lakh gallon capacity under ground/over ground sump having 1cum silt (approx).

(c) 01 lakh gallon to 2 lakh gallon capacity under ground sump having 1 cum silt in each compartment (approx).

(d) Less than 01 lakh gallons capacity under ground sump having 0.5 cum silt.(approx)

Supply and fix water level indicator in repairs at OHT in existing position with copper float of 300mm dia & 400mm long, hollow box of 16 guage copper sheet fixed to steel wire rope of required length including brass pullies with nylon bush and 50x50x6mm angle iron brackets for pullies, indicator board shall be of 10 gauge of MS plate 200mm wide fixed on angle iron frame 30x30x5mm with angle iron stiffners and after prepration of surfaces, board shall be painted with two coats of synthetic enamel paint over & including a coat of red oxide primer & marking of levels on front face of board with black synthetic enamel paint as per existing pattern or as directed by Engr-in-Charge including all necessary fixing arrangements for fixing of level indicator board as per site requirements complete all as specified and directed. Notes: (i) Quoted rate shall be deemed to be inclusive of all materials & labours, all tools/ plants, scaffolding with steel props for working upto approximate 25 M height as per site conditions and as directed. (ii) It shall be prime responsibility of the firm/ contractor to provide all necessary safety arrangements like safety belts, ropes, helmets, netting etc to all workers for their safety at working site for work at any height and during working hours, if any casualty happened, only firm/ contractor shall be responsible for the same and Government shall not be responsible for any compensation to workers or any other liability but firm's/ contractor's quoted rates shall be deemed to be inclusive all these aspects.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron strip 25x4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40mm bore GI pipe medium grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear incl 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth strip alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI strip and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

S&F in repairs including connecting and commissioning of MU - G20 fully automatic submersible pump star delta starter relay range 28 - 42 A in sheet metal enclosure conforming to IS/IEC60947-41, protection offered overload, single phasing, phase reversal & imbalance, auto restart features, vibration proof enclosure with IP 54 protection class, indication offered ON/OFF, voltage and ampere. Cat part No. SS95975 of make L&T or equivalent in Schineder/Seimens.

S&F in repairs including connecting and commissioning of MU - G30 fully automatic submersible pump star delta starter relay range 30-50 A in sheet metal enclosure conforming to IS/IEC60947-41, protection offered overload, single phasing, phase reversal & imbalance, auto restart features, vibration proof enclosure with IP 54 protection class, indication offered ON/OFF, voltage and ampere. Cat part No. CS960008 of make L&T or equivalent in Schineder/Seimens.

Supply and fix in replacement, air termination, single pointed copper rod 12mm dia and 600mm long with two Nos brass nut, bolt and washers to existing/ new lightening conductor system complete all as specified and directed.

Supply and fix in replacement, aluminium strip 25x3.15mm with and including saddles and fixing screws etc and jointing of strips with suitable size of nuts, bolts & washers; for roof conductors and down conductors above ground complete all as specified and directed.

Supply and fix in repairs, integral LED aviation light comprising of aluminium housing with polycarbonate enclosure with and including 0.60m long medium grade GI pipe of suitable dia & necessary clamps of suitable size if required and PCC coping as per site requirement in PCC 1:2:4 type B0 using 12.5mm graded stone aggregate and connecting up with & including two runs of single core PVC insulated, sheathed, mutistranded copper conductor cable of size 1.5Sqmm drawn in and including rigid PVC casing caping heavy grade ISI marked not less than 20mm width with its accessories from light to DB (near bottom of OHT) complete all as specified & directed.Make:- Bajaj / Philips / Havells as approved by GE.

Material & labour for cleaning away all grass vegetation, scapling shrubs bushes under groth roots and trees upto zero level not exceding 30 cm grith and removing rubbish upto distance of 50 mtr out the periphery of area under cleaness complete with tractor/JCB plants all as specified and directed.

M & L test point terminal box made of GM or phosphorus bronze size 75x75x25mm drilled and sequwed including 03 Nos 08mm Dia 25mm Long hex head screuqe ,complete all as specified and directed.

Supply only in replacement lead pig

Supply only gland packing of size 10/15/20mm

Material and labour rubber gas ket of any size for fixing in sluice valve, NRV, flanges etc complete all as specified and as directed.

Supply and laying sand cushioning with dry and clean washed sand over and under the under ground cable in trenches, ducts for cable protection 150 mm below & 80 mm above the cable as protection of cable complete as specified & directed. Note : Punned thickness of sand shall be measured & paid.

Material & labour for Best quality locally available, sub class B bricks (Old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of the cable complete all as specified and as directed by Engineer-in-charge.

Supply anf fixing in replacement MCB DB 4way 240 volt with MCB Isolator 40A- 01, MCB SP 10A-02 Nos complete all as specified and as directed.Make :- Legrand/ Havells/Seimens

Supply and fixing of High intensity HIP reflectice sign board made from hardened plastic aluminium combined sheet 2 mm thick, two sheets placed back to back aluminium pop riveted to stainless steel square pipe 40 x 40 mm of 16 gauge, frame of size 1300 x840 mm. Frame supported with 25mm and 50 mm round 2700mm long stainless steel pipe of 16 gauge welded to frame. Top end of legs closed with decorative stainless steel dome place. All stainless steel parts polished on plastic aluminium combined sheet, HIP blue reflective sheet shall be pasted on both side and with white fluorscent computer cut tape minimum 110mm height to be pasted on sign board and border of white HIP sheet shall be pasted and fixed in PCC (1:2:4) type B1 including dismantling existing old vintage damaged standing sign board , complete all as specified and directed by Engineer-in-Charge.

Material & labour in replacement Brick masonary valve pit of size 120x120x120cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 50x50mmx6mm duly painted with two coats of synthetic enameled paint over a red oxide primer including locking arrangement , brick work and all inner surfaces of pit and exposed portion of out side shall be plastered in cement motor (1:4) complete all as specified and directed.

Material & labour in replacement Brick masonry valve pit of size 75x75x60cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 50x50mmx6m duly painted with two coats of synthetic enameled paint over a red oxide primer including locking arrangement , brick work and all inner surfaces of pit and exposed portion of out side shall be plastered in cement motor (1:4) complete all as specified and directed.

M & L in replacement Foot valve strainer of bore 100 mm dia ,ISI marked all as specified and dircted

Supply only Calcium based granual dis infectant for water treatement more stable than chlorine gas and stronger than bleaching powder and Calcium Hypo chlorite 65% to 70% Chlorine content in granular (Packing in 45 Kg Plastic drum) complete all as specified and as direcd by Engr-In- Charge

Supply only in replacement of MS Nut bolts machine made with hexagonal or square head at one end screwed the other, each screws and to be fitted with washers and nut, exc 5 cm but not exc 10 cm long and dia of bolt 10cm complete all as specified and directed.

Supply and fix in replacement of CI sluice valve with forged brass stem class PN- 1.0 ISI marked with stainless steel spindle and flanged both ends of size 80 mm dia bore with hand wheel confirming to IS 14846/2000 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm complete all as specified and directed. Make;KIRLOSKER/UPADHYAY/VENUS / L&T

Ditto all as per above item but of size 100mm bore.

Ditto all as per above item but of size 150mm bore.

Ditto all as per above item but of size 200mm bore.

Supply only chemical TCCA-90 (Trichloroisocyanuric) acid granule form, organic compound for swimming pool complete all as specified and as directed

S&F in replacement change over switch 4 pole 320 Amp, 415 Volts, Onload type, front handle type with enclosure including connection and testing complete all as specified and directed. Make-Havells/ Legrand/ L&T or equIvalnet.

Excavation in trenches not exceeding 1.5m deep & not exceeding 1.5m wide or area not exceeding 10 Sqm on plan, in any type of soil and getting out for foundation, trenches or laying of electric cable or pipes complete all as specified & directed.

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removal of excavated materials (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.

Collect the water sample as directed,Testing of water sample from NABL Accredited Authorised Test Laboratory with following test list as below complete all as specified and as directed by Engineer-in-Charge. (a) Turbidity(b) Ph Value ( C) Chloride (d) Copper (e) Fluoride (f) Free Residual Chlorine (g) Iron (h) Aluminium (j) Ammonia (k) Anionic detergents (l) Barium (m) Boron (n) Calcium (o) Magnesium (p) Manganese (q) Mineral oil (r) Nitrate (s) Phenolic compounds (t) Selenium (u) Silver (v) Sulphate (w) Sulphide (x) Calcium (y) hardness (z) Zinc

Supply and fixing MCCB 4 pole 63 Amps , 415 volts rupturing capacity 16KA incl thimbal necessary requirement of copper cable with copper lugs on LT panel/feeder pillar box including dismantling /taking down existing unservieable MCCB complete all as specified and directed Make :- Schenider/ Havells/ L&T

Supply and fixing MCCB 4 pole 100 Amps , 415 volts rupturing capacity 16KA including thimble necessary requirement of copper cable with copper lugs on LT panel/feeder pillar box including dismantling /taking down existing unservieable MCCB complete all as specified and directed Make :- Schenider/ Havells/ L&T

Supply and fixing MCCB 4 pole 160 Amps , 415 volts rupturing capacity 25KA including thimble necessary requirement of copper cable with copper lugs on LT panel/feeder pillar box including dismantling /taking down existing unservieable MCCB complete all as specified and directed Make :- Schenider/ Havells/ L&T

Supply and fixing MCCB 4 pole 250 Amps , 415 volts rupturing capacity 16KA necessary requirement of copper cable with copper lugs on LT panel/feeder pillar box including dismantling /taking down existing unservieable MCCB complete all as specified and directed Make :- Schenider/ Havells/ L&T

Supply and fixing MCCB 4 pole 400 Amps , 415 volts rupturing capacity 25KA necessary requirement of copper cable with copper lugs on LT panel/feeder pillar box including dismantling /taking down existing unservieable MCCB complete all as specified and directed Make :- Schenider/ Havells/ L&T

Supply, laying or fixing or passing through pipe commissioning and testing XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core including taking down/out old UNSV cable from trenches/ducts/from pole/wall removing from site etc complete all asspecified & directed.make ;- Havells/ polycab/finolex

Supply, laying or fixing or passing through pipe commissioning and testing XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core including taking down/out old UNSV cable from trenches/ducts/from pole/wall removing from site etc complete all asspecified & directed.make ;- Havells/ polycab/finolex

Supply, laying or fixing or passing through pipe commissioning and testing XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 Sqmm 2 core including taking down/out old UNSV cable from trenches/ducts/from pole/wall removing from site etc complete all asspecified & directed.make ;- Havells/ polycab/finolex

Supplying and fixing in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheating of PVC tape and overall PVC sheathed in service connection, twin core 10 Sqmm stranded aluminum conductor cable flat or circular complete including dismantling of existing service connection all as specified and directed. make ;- Havells/ polycab/finolex

Supplying and fixing in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheating of PVC tape and overall PVC sheathed in service connection, twin core 6 Sqmm stranded aluminum conductor cable flat or circular complete including dismantling of existing service connection all as specified and directed. make ;- Havells/ polycab/ Finolex

S&F in repairs PVC Insulated and PVC sheathed Industrial 3 Core Flat Submersible cable 6 sqmm with bare bunched copper conductor for submersible pump motor with voltage grade 1100 volts as per IS 694/1990 including jointing connecting with submersible motor to starter including removing old submersible cable complete all as specified and directed. Cat part No. SC-YY-CBT2P11F of make Polycab or equivalent in RPG/ Havells

S&F in repairs PVC Insulated and PVC sheathed Industrial 3 Core Flat Submersible cable 10 sqmm with bare bunched copper conductor for submersible pump motor with voltage grade 1100 volts as per IS 694/1990 including jointing, connecting with submersible motor to starter including removing old submersible cable complete all as specified and directed. Cat part No. SC-YY-CBT2P11F of make Polycab or equivalent in RPG/ havells

Supply & lowering in repairs GI heavy duty column pipe 80mm (3" bore),C grade 3 Mtr long in bore well including all cutting and threading both end ISI marked with heavy duty 100mm long thread for lowering all as specified and directed. Make : TATA/Jindal/Swastik /BST

Supply & lowering in repairs GI heavy duty column pipe 100mm (4" bore),C grade 3 Mtr long in bore well including all cutting and threading both end ISI marked with heavy duty 100mm long thread for lowering all as specified and directed. Make : TATA/Jindal/Swastik /BST

Cutting and threading 80mm (3" bore) both end MS / GI column pipe heave duty 3 Mtr long including new socket 80mm bore 100 mm long complete all as specified and directed.

Cutting and threading 100mm (4" bore) both end MS / GI column pipe heave duty 3 Mtr long including new socket 100mm long ISI marked with heavy duty complete all as specified and directed.

Yield test for the borewell by continously pumping for 16 hours to determine safe pumping yield complete all as specified and as directed

Taking out Submercible Pump Set at different locations alongwith Column pipe of 80 to 100 mm bore with Submercible cable from the bore well of depth ranging for 30 Mtr to 90 Mtr and transporting it to work-shop for dismantling / opening for repair & taking out un-serviceable parts for repalcement and carryout all repair/maintenance and re-assembling and refitting in the existing position including lowering, tightening of rope to the pump by suitable arrangment of chain pully system and connection with starter electrically and connection with pipe line mechanically etc all complete of capacity 7.5 to 35 HP including loading /unloading and transportation to and from workshop

Lowering and re-fixing of submersible pump set of 7.5 HP to 35 HP at different locations including pump set fitting commissioning and testing after repair & replacement of un-serviceable parts with existing coloumn pipe 80/100mm bore with existing serviceable cable including tightening of rope to the pump by suitable arrangment of chain pully system and connection with starter electrically and connection with pipe line mechanically complete all as specified & ditected.

M&L for rewinding the motor stator/rotor with supper enameled copper winding wire of existing size and gauge and turns etc including all the insulating material i.e. varnish, supper high quality cotton tape, insulating paper or soldring etc. including drying upto desired temperature for specific time complete all as specified and directed by Engr-in-Charge of the following capacity of submersible pump:- Note : (i) Rewinding warranty of submersible pump shall be of 06 months. (ii) UNSV PUMP/ Motor should be intalled within 24 Hours when and after intimation for failure of motor (iii) A recovery Rs 2000 for Late Intallation of pump (iv) Before installation of motor / Pump , it should be ensure that all unsv spare parts of Motor / Pump as given belows are replaced (v) Spare parts will measure and paid separately

(c) 20 HP to 22.5 HP

(e) 5 HP to 15 HP

Devlopment of tube well with compressed air and after with 25% extra capacity pump by puming moddy water etc complete all as specified & as directed

Material & Labour for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate size as in thrust block / support pillar for pipe holding with MS clamps 50 x 6 mm including finishing the concrete surface fair and even with out using extra cement making good to disturbed surfaces complete.

S&F in repairs fitting for spigot socketed cast iron pipes 80 to 300mm bore such as bends (any tyupe, radius and angle), tapers any type straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, 'Y' jujction, double branch, cross (all sockets or socket and spigot), collars, caps and plugs complete all as specified and directed.

Dismentling the honey bee nest complete from the OHT of the different location all as specified and directed. Note :- It shall be prime responsibility of the firm/ contractor to provide all necessary safety arrangements like safety belts, ropes, helmets, netting etc to all workers for their safety at working site for work at any height and during working hours, if any casualty happened, only firm/ contractor shall be responsible for the same and Government shall not be responsible for any compensation to workers or any other liability but firm's/ contractor's quoted rates shall be deemed to be inclusive all these aspects.

Mechanized cleaning and disinfection of Water Storage Tank : 1. Mechanized Dewatering of water storage tank. 2.Removal of sluge laying on the bottom ofwater storage tank through special sludge pumps. 3.Cleaning of internal walls of water storage tank through High Pressure rotary Jets 4.Vaccum cleaning of the floor of water storage tank through industrial vaccum cleaners. 5.Spray of H2 O2 inside the tanks as an antibecterial agent. 6. UV radiation of the tank. 7.Spray of bleaching powder in prescribed quantity after final cleaning of the tank. 8. all inlet & out let pipe line should be found no leakage , if any found that should be change at site by the contractor . Note writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed.

(a) 500 ltr capacity

(b)1000 ltr capacity

(c) 2000 ltr capacity

(d) 5000 ltr capacity

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) 3 Layer including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed. Make :-Sintex / Polycon/ JP Polyplast

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) 3 Layer including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed. Make :-Sintex / Polycon/ JP Polyplast

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 2000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) 3 Layer including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed. Make :-Sintex / Polycon/ JP Polyplast

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 5000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed. Make :-Sintex / Polycon/ JP Polyplast

S&F in repairs 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) Make :- Prayag or equivalent

S&F in repair of 25mm bore,Float/ ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -690 Gms) Make :- Prayag or equivalent

S&F in repair of 40mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -690 Gms)Make :- Prayag or equivalent

S&F in repair of 50mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.Make :- Prayag or equivalent

S&F, in repair, 15mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -142 Gms)Make :- Prayag or equivalent

S&F in repair, HDPE water storage tank lid black (with arrangement for locking for 500 litres capacity tank complete all as specified and directed.

S&F in repair, HDPE water storage tank lid black (with arrangement for locking for 1000 litres capacity tank complete all as specified and directed.

S&F in repair, HDPE water storage tank lid black (with arrangement for locking for 2000/5000 litres capacity tank complete all as specified and directed.

S & F in repairs steel water tubing galvanised ,medium grade with all fittings and fixed complete to walls , or in floors, in old/new situation (Make : TATA/JINDAL/ swastik) for bore of pipe following sizes: -

(a) 25mm dia

(b) 40mm dia

(c ) 50 mm bore

S & F in repair gate / globe valves cast copper alloy screwed both end down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed bore of following size : -

( a ) 20 mm bore.

( b ) 25 mm bore.

(c ) 40 mm bore

(d) 50 mm bore

M&L for 50mm thick cement concrete (1:2:4) type B1, using 20mm graded stone aggregate laid over roof as in platforms for water tanks, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

S&F in repairs Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410-W (Gde-E-250) quality-complete all as specified and directed.

S&F in repairs mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc,. Complete drilled for fixing of steel sheeting or other covering . Door etc to be prepaired for hanging or sliding with and including either hooks or steel hanging door fittings also fastening and fixing complete conforming to Fe-290 (Gde-E-165) all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L for painting with approved colour to existing MS/GI pipe (raising main delavery over flow and wash out) of size 100/150/200mm dia 30 mtr height over head tank with two coat of synthetic enamelled paint including scrapping out old paint all as directed. Note:- All T & P, 30 mtr staging mtrl and men power risk contractor respinsibility.

M & L in replacement CI non return valve of bore 150 mm dia ,ISI marked all as specified and dircted Make : Kiriloshkar/Upadhya/Venus/L&T

Supply and erecting steel tubular poles in replacement complete with cast iron base plate, finial taper plug , bolts Nuts & screws complete all as specified type 410SP 31 of 9 mtr long including painting of pole with one coat red oxide primer & two coats of aluminum paint & emedded portion shall be painted with two coat of black bituminous paint all as specified in IS and all as shown in drawing No CEJZ/TD/824/91, Sheet No1/2 dt 16.04.91 with following specifications:- (i) Excavation in trenches in any types of soil ,returning filling in & well ramming including watering and disposal of surplus soil to a distance not exceeding 50 mtr from the starting points. (ii PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in foundation bedding all as specified and directed . (iii) PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as upto ground level. (iv) PCC (1:2:4) type B-2 using 20mm graded stone aggregate as in coping including necessary form work. (v) Writing pole No with yellow shade on black base using synthetic enamel paint having height of words exc 5 cm as directed by Engr-in-charge.

Supply and fixing in replacement LED street light luminaires not less than 70 watt, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate eriver compartment with IP66 protection and impact resistance of IK07 with 10 KV built-in-surge protection device including service braket complete all as per Havells Cat part No ENDURAPEARLPLUSSL70WLED757PASYTOPC / Philips/ Bajaj

Supply, fixing in replacement connecting LED flood lights, not less than 100 watt, Energy saving and environmental friendly long life LED flood light made up of pressure die cast aluminium housing with high power LED as lighting source , with IP65 protection and impact resistance Including cross arm to fix in LT pole, nut, bolt etc complete all as specified and directed.Make: Havells/ bajaj/ Philips

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core including taking down old UNSV cable of any description. Make:- Havells / polycab/ finolex

Supply only alum crystals for water treatment as specified and as directed

M&L for Demolition of road/path /concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) .complete all as specified and as directed.

Dismantling of old unservicable bus bar chamber and S&F Design, supply, erection, testing and commissioning of outdoor type LT Bus Bar Chamber box, platform mounted, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos stepped type Aluminium bus bars (32mm x 5mm) for looping & branch connection system .The chamber shall be painted with powder coated paint (Shade : RAL-7032) after 7 tank pre-treatment of surfaces. The bus bar chamber shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947.

The bus bar chamber shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate , front door (01 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel (75 MC) base frame at bottom. The bus bar chamber shall be provided with ventilation facility in the form of louvers for better heat dissipation.

(Note : The bus bar chamber Box shall be designed in such a way that adequate workable space is made available inside the compartments and the size of the chamber shall not be less than 500mm height (without base frame & canopy), 500mm width and 450mm depth).

Supply and fix junction box made out of polycarbonate with IP 55/IP 65 protection of size 200 x 160 x 98 mm, 5 way having terminals for termination of cable with necessary nuts and bolts ,Make - Hansal including -02 Nos polycarbonate cable gland Make :Hansal, 01 Nos DIN rail for mounting of MCB and 01 No, MCB SP, 10 KA, 16 Amps Make - Legrand in and including fixing clamp of FI 50 x 6mm with necessary nuts and bolts complete in and including taking down of existing u/s junction box of any type all as directed.

Supply of Rubber mat of 1 M x 2 Mx 10MM thick etc complete all as specified and as directed

Sachdeva Enterprises