JANTA INTER COLLEGE JIVPUR ME SAMUDAYIK SHAUCHALAY KA NIRMAN KARYA

Clearing grass and removal of rubbish upto a distance of 30m outside the periphery of the area as per technical specification clause 201.

Excavation in foundation in ord inary soil including lift upto 1.50 M and lead upto 30M. Including watering ramming and dressing etc. and disposal of surplus earth as upto a distance of 30M. SI.No.251

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Km. from the site of work and including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of the work. S.I. No. 255

Providing and laying in Cement concrete in foundation of columan 1:4:8 of not less then strength of M150 stone Ballast (40 mm nominal size) 4 apprroved coarsesand :1 Cement and curing complete including cost of form work in foundation and floors S.I.No.281

M-150 brick work in 1:4 cement & C sand in foundation including necessary cutting and moulding of briks required and also including honey comb brick work thikness of one brick wall supply of all materials, labour and T&P etc. S.I.No.305(b)

R.C.C. work in foundation of column ,beam and slab with cement approved coarse sand and 2 cm. Gauge approved stone grit in proportion of 1:2:4 S.I NO 288

M-150 brick work in 1:4 cement & C sand in super structer including necessary cutting and moulding of briks required and also including honey comb brick work thikness of one brick wall supply of all materials, labour and T&P etc. S.I.No.305(b)+309

Same as item no. 5 but 0.115m thick in super structure. S.I. No. 305+309+310a

Mild steel or iron in plan work as in reinforced concrete or reinforce brick work wrought to required shape as necessary cutting ,bending for proper completion of the work and including supply of all steel its wastage bend hooks and authourise overlaping shall be measured required to proper completion of the work SI NO.504

12 mm thick plaster on plain surface of wall with cement &F Sand consising of I part cement and 4 part of approved F sand finished with neat cement Minimum thickness not to be less then 10mm as per S.I.No.584

20 mm cement plaster in two coats backing coat 17 mm and finishing coat 3 mm thick (of neat cement or cement and marble dust in ratio 5:1) on rough side of single or half brick wall for interrior plastering upto floor two level including arises internal rounded angles not exceeding 80 mm in girth and finishing even and smooth. S.I. No. S1 597

One priming coat & one coat oil distemper on new work including supply of all material labour and t&p etc required for proper complete of the work Si no 649+650

fabrication and supply of T - iron 40 x 40 x 5 mm door/ window chaukhat frame icluding cost of steel.' all carriage welding cutting, lab our, grinding smooth finishing, staple plate 6 mm. thick welded in back flange at hinges cost of 14 gauge hinges for 50 mm. size including all drilling, machine threading, all screws, nuts bolts, arrangement for locking of tower bolt, tie rod. Hold fasts made of 25 x 3 mm. flat inron 15cm. Long Complete job including applying of one coat of re oxide steel primer paint required for direction of Engineer in charge. Standard weight or actual weight which ever is less shall be paid.

Fabrication of Z - section stee windows and ventilator

Supply & fixing of Flush Doors commercial quality conforming to I. S. 2202 Part 1 (1993) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges,bolts locks, handles, springs and other fittings but excluding their supply and including painting with two coats of black japan paint on al iron fittig if necessary screws to be supplied departementally. S.I. No. 470

Painting or varnishing new iron work in small areas or new wood with one coat (up ton one sq. meter ) of ready mixed priming paint and one coat of approved superior quality ready mix paing (2n quality synthetic enamel paint of approved brand such as British paint, Shalimar, Asian or equivalent as approved by E/I) or Varnish including supply of all materials, labour, T&P etc. required for proper completion of the work. Paint to be used should confirm the I.S.I. No. 103-1950. S.I. No.641

Supply and fixing of 10 cm. Internal dia A. C. down pipes complete with rose heads bends, and gratings and including supply of necessary M.S. clamp 25 cm. X 3mm. Fixed to walls, with and including supply of 15 cm. Long 6 mm. dia, nails all materials, labour and T&P etc. required for proper completion of the work and also including repair of plaster, pointing etc. if damaged during fixing of the pipes. S.I. No. 730

Anti termite work

Supply and fixing 6 mm. (1/4") China white glazed tiles in flooring or in skirting or Dado laid with 1 : 3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T & P etc. required of proper completion of the work. S.I. No. 628

2.5 cm. (1") thick 1:2:4 plain cement concrete floor with cement, approved coarse and 2 cm. Graded approved stone ballast laid in panels finished with 3 mm (1/8") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 cm. (3") thick base concrete consisting of cement, local sand and brick ballast 4 cm. Gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish, including supply of all materials, labour, T & P etc. required for proper completion of the work. S.I. No. 601b without base

Providing and wiring of light point with 1.5 sqm M Copper conductor in PVC conduit concealed in partly slab and partly wall

P/F of LED Buld

Inter water supply & sewerarge system

Installation of Solar pannel and Summerciable pump & Boring work etc. complete

Supply and Fixing of Project board etc.

Please Enable Macros to View BoQ information