RUNNING DEPOSIT WORKS FOR ANNUAL DEPOSIT WORK

Loading, Carriage and unloading of ACSR Dog/ Panther Conductor from store to work site or vice-versa.

Loading, Carriage and unloading of Earth wire/G.I. wire from store to work site or vice-versa.

Loading, Carriage, unloading and taking out cable from cable drum of LT/HT (3*70 sqmm to 3*400 sqmm ) cable from store to work site or vice-versa.

Loading, carriage and unloading of Aearial Bunched Cable all size from store to work site or vice-versa.

Loading, Carriage and unloading of GI/MS/HDPE pipe from store to work site or vice-versa.

Loading, Carriage and unloading of LT single core (1*70 sqmm to 1*400 sqmm ) cable from store to work site or vice-versa.

Fabrication/modifications of M.S. Structure/Items with M.S. Angle and M.S. Flat. as per requirement of site conditions.

Laying, stringing, tensioning & final sagging of 3 Phase 3 Wire/4 Wire HT/LT O/H ACSR conductor line.

Laying, stringing, tensioning & final sagging of Earth wire/G.I. wire including of cross lacing in every 2.5 mtr.

Dismentalling of binding wire from insulators and loosening of the ACSR mixed conductor on each pole then lowering down the ACSR mixed conductor & rolling into bundles.

Digging of Trench for laying of LT/HT (3*70 sqmm to 3*400 sqmm ) cable in normal soil in size of 30 cm. wide and 0.5 to 1.5 meter deep.

Digging of Trench for laying of LT/HT (3*70 sqmm to 3*400 sqmm ) cable in kharanja soil in size of 30 cm. wide and 0.5 to 1.5 meter deep.

Digging of Trench for laying of LT/HT (3*70 sqmm to 3*400 sqmm ) cable in metallic road in size of 30 cm. wide and 0.5 to 1.5 meter deep.

Laying of LT/HT (3*70 sqmm to 3*400 sqmm ) XLPE Cable in digged trench covering with bricks and back filling and proper ramming.

Restoration of Metallic/RCC/Interlocking road proper repairing with appropriate materials after completion of work as per requirement of site. (where restoration charges not paid by kesco)

Laying of LT/HT (3*70 sqmm to 3*400 sqmm ) XLPE Cable through GI/MS/HDPE pipe in digged trench.

Laying of LT/HT (3*70 sqmm to 3*400 sqmm ) XLPE through HDD Method With GI/MS/HDPE Pipe

Laying of LT/HT (3*70 sqmm to 3*400 sqmm ) XLPE through HDD Method Without Pipe

Laying of LT/HT (3*70 sqmm to 3*400 sqmm ) XLPE Cable Over head (Pole to Pole etc.) with Fixing of Holding Clamp on existing /newly erected ST Pole

Laying of LT Aerial Bunched Cable all size including fixing suspension clamp with eye hook , Dead end clamp with Eye hook on erected Steel Tubular Pole etc.

Opening and reconnection of consumer service connections after replacement of line/ poles etc.

Dismentalling of LT/HT (3*70 sqmm to 3*400 sqmm) cable on each pole then lowering down the cable & rolling into bundles.

Laying and Stringing of Single Core (1*70 sqmm to 1*400 sqmm) L.T. Cable

Laying and Stringing of 3 ½ Core (35 sqmm to 400 sqmm) L.T. Cable.

Fabrication, erection & grouting(400mm*400mm) of T/F fencing of frame size 3x2.4 mtr. including cost of M.S. Angle size 40x40x5 and M.S. Flat size 35x5, fixing of welded steel wire fabric on steel frames by welding of 10 SWG wire fabric, including Painting fo two coats of paint on iron based surfaces with ready mixed paint to give bus green shade including cleaning of oil and dust.

Chopping of tree branches coming in the route of HT/LT line which are touching the phase line conductors to avoid fault on feeder, for 75mm dia to 450mm dia as per requirement of site.(Rate per tree)

Laying of control cable including all related civil work

Filling of soil in newly constructed S/S Yard

Erection of CT/PT Junction Box

Erection and grouting of Busbar Gantry

Fabrication of Busbar Gantry

Erection charge of lower bus bar with ACSR Panther conductor

Erection charge of upper bus bar with ACSR Panther conductor

Erection and grouting of various MS Structure with proper welding , 1 : 4 : 8 CC ratio in proper alignment and plinth 15 Cm. above ground level and smooth finish.

Painting of M.S. Structure including cost of all material.

Making of Earthmat for new sub station (M.S strip provided by contractore)

Mounting of 11KV Pin/33KV Pin / 11KV Disk Insulator

Erection of 33KV Line Isolator / Bus Isolator on erected structure

Erection of LA on erected structure

Arrangement of requirment of material for wiring and testing of panels & Power T/Fs of newly constucted sub station

Loading,Carriage and unloading of other material not covered above from store to site or vice-versa for all works under agreement.