Creation of 100 kVA, 11/0.433 KV Pole Mounted Distribution Sub-Station alongwith laying of HT/LT network at Iram lane-B, Budshah Nagar, Sub Division Chanapora - (Key Materials to be Provided by the Department)

Amount

Installation, Testing and Commissioning of 100 kVA, 11/0.433 KV, 3-Phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2 (Aluminium Wound) (DT to be Provided by the Department)

Erection of ST Poles 9 Mtr (ST-410 SP33) (Poles to be Provided by the Department)

Erection of ST Poles 8 Mtr Long (ST-410 SP15) (Poles to be Provided by the Department)

Laying, Stringing and Commissioning of 0.1 ACSR Conductor (Conductor to be Provided by the Department)

Laying, Stringing and Commissioning of 0.05 ACSR Conductor (Conductor to be Provided by the Department)

Providing and Fixing of Galvanized Ch. Iron X-Arm 8.5 ft long x 2 No. (100x50x6mm) duly fabricated

Providing and Fixing of Galvanized Ch. Iron X-Arm 8.5 ft long x 7 no. (75x40x6mm) duly fabricated

Providing and Fixing of Galvanized Angle Iron Brace 10 ft x 2 no. (50x50x6mm) as Transformer Belt - duly fabricated

Supply, Installation and Commissioning of Gapless Surge Arrestor, 9 kV,10 kA ,LA with polymer housing, Stn. Type

Supply, Installation and Commissioning of 11 KV Horn Gap Fuse Set 3-Phase 200 Amp

Supply, Installation and Commissioning of 11 KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type comprising of 9 No. insulators, pipes and lock pad etc complete job

Supply, Laying and Commissioning of 120 mm sq 1-Core, 1.1 KV Grade PVC Insulated Conductor FRLS Type (Polycab/Havells/Gloster or Equivalent Make)

Providing and Earthing of Sub-Station -- (Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mm x10 mm & 50 mm x 6 mm) for connection of Transformer Body, G.O Set & Lightening Arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials and earth Chamber made of rickmasonary with RCC slab cover.

Supply, Installation and Commissioning of 160 Amp MCCB TPN (Schnieder/Siemens/Legrand Make) with breaking capacity 36 kA, alongwith Enclosure and galvanized angle iron stand duly grouted

Providing and Fixing of Aluminium Solderless Clamp suitable for 100 kVA

Providing and Fixing of Aluminium Lugs 120 mm sq (3D Make)

Providing and Fixing of Bobin Insulators 40 mm

Providing and Fixing of 11 KV Danger Plate with Clamp

Providing and Fixing of GI Wire 8 SWG

Providing and Fixing of Pole Collars of 50x8mm Flat Iron (GI) with Nuts and Bolts of Sizes

Providing and Fixing of Anti-Climbing Device with Clamps

Providing and Fixing of Galvanized Ch. Iron Cross Arm 6 ft long(75x40x6mm) X 04 No. duly fabricated

Providing and Fixing of Galvanized Angle Iron 5'6'' ft x 08 No. (50x50x6mm) duly fabricated

Providing and Fixing of Galvanized Ch. Iron Cross Arm 4 ft long(75x40x6mm) X 04 No. duly fabricated

Providing and Fixing of F-Top fabricated of Galvanized Channel Iron (75x40x6mm) 1.5' long and of 6'' horizontal length

Providing and Fixing of 11 KV Polymeric Composite Pin Insulator 12 kV, 5 kN, Lighting Impulse 75 kV Positive and 80 kV Negative, creepage distance 320 mm complete in all respects as per REC Standards

Providing and Fixing of LT Shackle Insulator 16 KN with GI nuts and bolts

Providing and Fixing of GI Muki Clamp 0f 50x8 mm galvanized flat iron with end inner dia 18 mm for Shackle Insulators suitable for ST Pole 8 mtr long

Providing and Earthing of ST Poles as per REC standards

Painting of ST Poles With 1 coat of Red Oxide and 2 coats of Al-Paint.

Cement Bottoming of ST Poles below and above ground in 1:2:4 Mix as per REC Standards (0.5 cum per pole)

M/S ROYAL ELECTRICAL MECHANICAL and SUPPLIERS

Adnan Electricals and Suppliers

Heaven Electricals

M/S HAYAT ELECTRICALS