GE/BAS-25/2022-26 REPAIR TO ROOF TREATMENT, JOINERY, PLUMBING WORK ETC OF B/R PORTION IN MAP ACCN AT BASOLI UNDER GE BASOLI JK

Amount

M & L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 including demolition of old Brickworkor stone masonary complete all as specified and as directed.

Ditto all as per item No 1 here-in-before but except Brick.

M&L for rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, Preparation of newly plastered surfaces of walls and applying two coats of oil Bound destemper of approved tint, complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:4) finished fair and even surfaces without using extra cement, preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M & L preparing new plastered or unplastered surfaces of walls and applying two coats of white wash including rendering 15 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement including taking down old plastered surfaces in any location,complete all as specified and as directed.

M & L two coat of oil bound distemper on new plastered/putty surfaces of walls including rendering 15 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement including taking down old plastered surfaces in any locations, complete all as specified and as directed.

M & L preparing new plastered or unplastered surfaces of ceiling and applying two coats of white wash in ceiling including rendering 10 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement including taking down old plastered surfaces upto third Floor complete all as specified and as directed.

M & L two coat of cement base paint on new plastered surface of walls including rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement including taking down old plastered surfaces upto third Floor all as specified .

M & L for preparation of old decorated plastered or un plastered surface of wall and applying one coat of white wash upto Third Floor complete all as specified.

M & L for preparation of old decorated plastered or un plastered surface of ceiling and applying one coat of white wash complete all as specified.

M & L for preparation of old decorated plastered or un plastered surface of walls after complete removal of existing surfaces and applying one coat of oil bound distemper over a coat of 3mm wall putty upto any height filling the gap or unequal surface complete all as specified.

M & L for preparation of old decoratede plastered or un plastered surface of wall and applying one coat of cement base paint including scaffolding and filling the gap or unequal surface with cement mortar /chalk whiting/Putty upto Third Floor complete all as specified.

M & L for preparation of old painted surfaces of wood or wood based surface of any description over 10 cm with or girth and painted with one coat of synthetic enamel paint all specified.

M & L for preparation of old painted surfaces of steel of any description over 10cm with or girth and painted with one coat of synthetic enamel paint all specified.

M&L for Plain cement concrete padding 1:2:4 type B-0 (12.5 mm graded crushed stone aggregate) of uniform thickness 50mm, padding shall be furnished even and smooth without using extra cement, complete all as specified and as directed.

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed .

Glazed ceramic tile 450x300x7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick bedding layer in cement and sand mortar 1:4 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed .

M&L Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform including Moulding, rounding , chamfering and making hole for Gas pipe and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including dismantling old granite slab all as specified.

S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc fixed in repairs, complete all as specified.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and pipe) complete fixed in repair, all as specified and as directed.

S & F in repair Plastic Seat Cover white / any colour as required to match shade of Water closet (Pedestaj Pattern) with screws complete all as specified and directed.

S & F in repair PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed in repairs, complete all as specified and as directed.

S & F in repair Vitreous china wash basin, white, flat back, size 550x400mm including pillar tap, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc., fixed in repairs complete all as specified and as directed .

S & F Vitreous china wash basin Padestal Type coloured , flat back, Approx Plan size 550x400mm including pillar tap, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc., fixed in repairs complete all as specified and as directed .

S & F PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed in repairs complete all as specified and as directed .

S & F PVC connection 15 mm size, of length 600 mm, with PTMT nuts supplied and fixed in repairs complete all as specified and as directed .

S & F Steel connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed in repairs complete all as specified and as directed .

S & F Stainless steel gratings with or without Hole 100/125/150mm dia fixed with cement motar/ white cement

S&F in repair waste pipe for WHB/Urinal/Sink for 32/40mm dia dirn given by Engr in charge all as specified & as directed.

S & F 15mm bore tubes, medium grade, galvanised with and including all fittings including concealing to walls, floors, or ceiling or laid in floors etc including taking down old steel GI pipe complete all as specified.

S & F 20 mm bore tubes, medium grade, galvanised with and including all fittings including concealing to walls, floors, or ceiling or laid in floors etc including taking down old steel GI pipe complete all as specified.

S & F in repair angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, supplied and fixed in repairs complete all as specified.

S & F in repair Bib taps, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed in repairs complete all as specified.

S & F in repair Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete all as specified.

S&F in repair Brass chromium plated tubular towel rail, size all as specified and directed by Engr in charge fixed with chromium plated brass screws and wooden/plastic cleats.

S & F in repair toilet paper holder CP Brass all as specified and directed by engr in charge

M & L in repair 2 mm Acrylic sheet fixed with screw / nails all as specified and directed by Engr in Charge

S & F in repair CP Brass bottle trap having minimum water seal 25 mm all as specified and directed by Engr in Charge.

S&F in repair PVC Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified.

S&F in repair PVC Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 25 mm dia (minimum weight 210 gms) complete all as specified.

S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints fixed to walls

S&F Brass chromium plated tubular towel rail, 20 mm dia 'D' type 60 cm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats.

S&F brass chromium plated shower rose 125mm size with swivel joints fixed in repairs including fixing to steel pipe or union all as specified.

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm all as specified.

S&F waste coupling of (half or full threaded), (32/40mm dia, minimum weight 45 gms) for sink of any size complete all as specified and as directed.

Supply and fixing in repair stainless steel plate rack 750 x 600 x 230 mm deep with spoon holders , shelves, fix to wall with suitable screws, washers, nut-bolts and necessary drilling etc. Including making good to disturbed portion in cement mortar (1:4) to wall etc , complete all as specified and directed.

S&F in repairs for 110/110 mm bore PVC (SWR) 'P' trap including jointing with solvent cement all as specified and directed..

S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement all as specified and directed..

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls all as specified and directed..

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls all as specified and directed..

S & F PVC SWR Bends in any radius 110 mm bore with access door in repair all as specified and directed..

S & F PVC SWR Bends in any radius 75 mm bore with access door in repair all as specified and directed..

S&F PVC (SWR) Vent cowl 110 mm bore in repair all as specified and directed.

S&F PVC (SWR) Vent cowl 75 mm bore in repair all as specified and directed..

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified and directed.

S&F in repair Wall mixer, Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

S&F in repair WHB mixer, Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

S&F in repair Chromium plated Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply only accessories (legs,nipple,cup etc.) for CP wall mixer/Basin mixer suitable for 15 mm dia pipe, complete all as specified and directed.

M&L for welding in repairs min size 2.5cm and max size 10 cm in length, thickness of metal to be welded exc,6mm but n.exc. 9mm, including all necessary arrangement for welding complete all as specified and directed.

S & F in repair Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including 25 mm Brass Float valve including taking down existing tank complete all as specified.

S&F in repair rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including 25 mm Brass Float valve complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge

Taking down and refixing including resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed .

M & L 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified.

M & L Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified.

M & L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified.

S&F in repair 18/19mm thick prelaminated interior grade board with one side decorative choice and other side white lamination fixed with screw as in cupboard/kitchen cabinet shutters fitting including Cupboard hinges , Aluminum handle , towerbolt, hasp and staple , piano hinges and channel where required, complete all as specified and as directed.

S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed .

S & F 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified.

S & F 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed .

S & F Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed .

S & F Door closer of aluminium (Die cast body), hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight between 36 to 60 Kg, ISI marked, complete all as specified and as directed .

S & F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed .

S&F harrison rails (curtain rails), mild steel chromium plated with fixing brackes, stops, rollers etc. all as specified.

M & L in repair Galvanized mild steel wire-cloth 0.48 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

Supply and fix for natural colour anodized aluminium window with frame of size 101.60x44.45x1.60 mm of approved manufacture fixed in position on wall with rawl plug and screws and window shutter as per direction given by Engr in Charge and glass pane 5 mm thick coloured fixed with rubber gasket and beading/glazing clip size 19.00X17X 0.70 mm (weight 0.097 kg /RM of both side),including flyproof shutter with fitting and glass and wiregauge including suitable aluminium handle, tower bolt hinges including taking down old unserviceable windows of any type all as specified and directed.

Repair of Aluminium Doors/Windows of any size including rubber gaskat , beading/ Glazing clip , raw plug/ screws including 5mm thick or any thickness plane glass/ frosted glass/ toughened glass of any thickness and including repair of aluminium Channel Frame/shutter including suitable aluminium handle , tower bolt all as specified and directed

M & L in repair 5 mm thick Glass Panes of any colour including with rubber gasket and beading /Glazing clip complete all as specified and directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe-290 Gde-165 including two coat of synthetic enamel paint over a coat of redoxide including dismantling old iron of any type complete all as specified and directed.

MANOTRA BUILDER

BALKRISHAN GUPTA AND SONS

Ms International Engineers

M/s. Jaswant Singh Govt Contractor

M/S SINGHAL ENGINEERS

m/s pankaj soni

M/S SWASTIKA BUILDERS