Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.7 LAccepted-AOC 403 GH MANSADEVI COMPLEX PANCHKULA 134109 HARYANA | PANCHKULA | HARYANA | 134109 | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹66.5 L+₹17.9 L (36.7%)Rejected-Finance HOUSE NO 102 LANE NO 4 C ANAND NAGAR BOHRI JAMMU 180002 J K | JAMMU | JAMMU AND KASHMIR | 180002 | L2 | Rejected-Finance Other Than L1 Bidder | |
| 3 | L3₹72.6 L+₹23.9 L (49.1%)Rejected-Finance AIRPORT ROAD SKALZANGLING LEH LADAKH 194101 | LEH LADAKH | LADAKH | 194101 | L3 | Rejected-Finance Other Than L1 Bidder | |
| 4 | L4₹73.0 L+₹24.4 L (50.1%)Rejected-Finance | L4 | Rejected-Finance Other Than L1 Bidder |
Tender Value
₹99 L
EMD Value
₹1.7 L
Closing Date
13 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Cdr, HQ 138 WE
HQ 138 Works Engineers PIN-914138 C/O 56 APO
REPAIR/ REPLACEMENT AND MAINT OF HT DISTRIBUTION SYSTEM AND ALLIED WORK AT SECTOR A SECTOR B SECTOR C AND SECTOR D AND ADJACENT AREA UNDER GE 865 EWS AT LEH
2023_MES_588692_1
138WE/L-19/2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE 865 EWS
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE 865 EWS
₹1.7 L
Yes
2 Aug 2023
8 Apr 2023
20 May 2023
8 Apr 2023
13 May 2023
29 Apr 2023
Amount
Excavation in trenches, in any type of soil not exceeding 1.5m wide or 10 Sqm on plan and not exceeding 1.5m in depth for foundation, Pole, shafts, cesspits, manholes, pier holes, Laying of UG cables etc and getting out in any type of soil, complete all as specified and directed by Engr-in-Charge.
All as per srl item No. 01 above but depth exc 1.5m and not exc 3.0m, complete all as specified and directed by Engr-in-Charge.
Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm, complete all as specified and directed by Engr-in-Charge.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed by Engr-in-Charge.
Material and labour for clean and dry sand (unwashed) in trenches and cable ducts including spreading and levelling for cushioning of underground cables, complete all as specified and directed by Engr-in-Charge.
Supplying and laying un-reinforced precast concrete cable cover, class HV, Type 1, flat, size 300mmx l80mm x 40mm, complete all as specified and directed by Engr-in-Charge.
Dismantling steel poles/struts, any size, complete all as specified and directed by Engr-in-Charge.
Supply, erecting and fixing in true vertical position Steel tubular swaged poles (11.0 metres long) complete with cast iron base plate, finial taper plug,bolts,nuts & screws as specified type 410 SP-55 , complete all as specified and directed by Engr-in-Charge. Note : - Earth work & PCC work will be measured & paid seprately under relavent item.
Material & labour for PCC 1:4:8, type D2 ( using 40 mm graded stone aggregate) as in base for foundation of the pole, complete all as specified and directed by Engr-in-Charge.
Material & labour for Providing PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in mass filling, complete all as specified and directed by Engr-in-Charge.
Material & labour for providing PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) for plinth coping, complete all as specified and directed by Engr-in-Charge.
Supply & Laying in trenches/through pipes / ducts or on poles XLPE insulated,screened, PVC bedded, galvanised steel strip armoured , electric power cables(heavy duty) with aluminium conductor, 11 KV,grade 95 sqmm 3 core (E) confirming to IS-7098. incl taking down old one, complete all as specified and directed by Engr-in-Charge.
Material and labour for disconnecting electrical connections of transformer of capacity 400 KVA to 1000 KVA. KVA of any make & any type loading the transformer on heavy vehicle (open chassis) type from existing platform / four pole structure, by heavy crane long boom type suitable for shifting and loading transformer and transporting the transformer for repair at workshop from substation/yard including unloading of transformer from vehicle at workshop & opening up transformer step down 11/0.433 KV by unscrewing all nuts / bolts and washers of top cover duly draining out complete transformer oil and kept aside for re-use. Disconnecting of all HT/LT wiring tap changer, complete LT/HT bushing, air breather etc and kept aside for re-use the serviceable parts and removal of unserviceable parts and taking out complete core assembly of transformer with help of chain pully to carry out the following works:- (a) Deslurring of transformer tank by taking out the complete deposited transformer oil sludge and cleaning thoroughly the transformer tank by washing & wiping out all dirt/rust accomolated including making preparation of old painted internal / external surfaces of transformer. Painting the internal surfaces of transformer with two coats of high grade anticorrosive varnishing paint over a coat of red oxide primer. Painting to external surfaces of transformer with two coats of Ist grade synthetic enamelled paint over a coat of red oxde primer, complete all as specified and directed by Engr-in-Charge. (b) Cleaning the transformer core assembly using electric blower and making the core free from sludge, dirt and any other foreign materials from its surfaces including provision of high grade insulation varnish and raising insulation of the core through heat chamber and raising of IR valve /LV-E > 500 Mega ohms HV-E >1000 Mega ohms, complete all as specified and directed by Engr-in-Charge. (c) Assembling the transformer complete including supply of complete set replacement of defective assecessoris such as oil seal, gasket, LT / HT bushing, stud, air breather, tap changer, including making necessary LT / HT wiring as dismantled Powering of dehydration / filtered transformer oil (dehydration charges will be measured and paid separately) as obtained during dismantling and top up balance quantum with new transformer oil as required. NOTE:- 1.New transformer oil will be measured & paid under relavent item) after sucessfully repairing the transformer reloding the same & place to its original location and installation complete including making LT/HT side cable connection, earth connection and testing complete 2. New spares as required will be measured & paid separately under relavent items, rate of oil seal & gasket will be deemed included in the quoted rate, complete all as specified and directed by Engr-in-Charge.
All as per Srl item No. 13 above but of capacity 200 to 320 KVA, complete all as specified and directed by Engr-in-Charge.
All as per Srl item No. 13 above but of capacity upto 63 KVA to 160 KVA, complete all as specified and directed by Engr-in-Charge.
M & L for replacement of worn out HT / LT winding made out of copper as per existing gauge/size of transformer of any capacity, complete all as specified and directed by Engr-in-Charge. Note :- The coil to be replaced shall have same number of truns gauge insulation value matching with manufactures design.
Supply and fixing of HV bushing with brass metal connecting rod, nut, bolt and washer suitable for transformer 63 KVA to 160 KVA, 12 KV as per IS, replacement of worn out stud, complete all as specified and directed by Engr-in-Charge.
Supply and fixing of HV bushing with brass metal connecting rod, nut, bolt and washer suitable for transformer 200 KVA to 630 KVA 12 KV as per, replacement of worn out stud, complete all as specified and directed by Engr-in-Charge.
Supply and fixing of HV bushing with brass metal connecting rod, nut, bolt and washer suitable for transformer 630 KVA to 1000 KVA 12 KV as per IS, replacement of worn out stud, complete all as specified and directed by Engr-in-Charge.
Supply and fixing of LV Bushing of transformer with Brass metal connecting rod, nut bolt and washer, suitable for 63 KVA to 1000 KVA capacity of tranaformer 1100 Volt as per IS , complete all as specified and directed by Engr-in-Charge.
Supply & replacement of silica gel crystal complete in all type of capacity of transformer, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of Silica gel breather assembly complete with silica gel crystal complete for the capcity of transformer400 KVA to 1000 KVA,complete all as specified and directed by Engr-in-Charge.
All as per Srl item No. 22 above but of capacity 63 to 320 KVA, complete all as specified and directed by Engr-in-Charge.
Supply and fixing heat shrinkable, straight through joint kit for XLPE HT U / G cable, 11 KV, 3 core (E) grade suitable for following sizes of XLPE cables , complete all as specified and directed by Engr-in-Charge. (a) Cross sectional area 95 Sqmm 3 core XLPE
-Ditto- all as per item No 24 but cross sectional area 120 Sqmm 3 core XLPE.
Supply and fixing in replacement jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint kit complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm , complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement jointing kit for 11 KV (Earthed) grade cable for outdoor end termination heat shrink type joint kit complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm , complete all as specified and directed by Engr-in-Charge.
Restringing of HT overhead line conductor comprising of any size ACSR conductor after opening from insulators, including restringing same and winding on insulator with proper size of binding wire upto permissible sag including cutting, trimming and vending of branches along HT line and removing of creepers from poles / conductors , complete all as specified and directed by Engr-in-Charge.
Dismantling air break gang operated switches vertical/horizontal mounted including insulators and operating mechanism for repair/ replacement complete, complete all as specified and directed by Engr-in-Charge.
Supply,installing, connecting and commissioning switch air break gang operated triple pole for current rating 200 Amp at 11 KV, out door type , mechanically operated, mounted on insulators with 9 insulator and steel frame, with operating mechanism and operating rod of 25mm bore GI pipe medium worked from ground level, with locking arrangements, complete all as specified and directed by Engr-in-Charge.
Repairing and servicing (Oiling and greasing) of Gang Operated Switch 11 KV vertical/Horizontal mounted and replacing defective parts including replacement of unserviceable spare parts as required for smooth functioning of AB switch, testing for its proper operation, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of Male Contact / moving contact Blade heavy duty high conductive metal cap 200/400 amp 11 KV all as specified and directed.
Supply and fixing in replacement of Female Contact/Fix contact Jaw heavy duty high conductive metal cap 200/400 Amp 11 KV, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of Tinned copper flexible wire 200/400 Amps for HT fuse complete, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of GI pipe medium grade of 25 mm dia suitable for operating rod of air brake switch and checking it for smooth functioning, complete all as specified and directed by Engr-in-Charge.
Disconnecting and taking out worn out jumpers / connectors of HT over head line / DO fuse unit in substations of any size or any length after removing binding wire / connector and replacement with the new ACSR weasel conductor jumpers including PVC sleeve in colour coding R/Y/B of same size and length approx 1.5mtr including new binding wire/ connectors suitable for AB switch/DO fuse unit, including provision of conducting jelly, complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement DO fuse unit 3 pole 11 KV, upto 200 Amp channel mounted complete all as specified and directed.
Supply & fixing in replacement lightning arrestor suitable for 11 KV grade, thyrester type, complete with all fitting transmission class for outdoor discharge capacity 65 KA, complete all as specified and directed by Engr-in-Charge.
Dismantling insulators any type, any size, complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement disc type insulator, porcelain, vitreous, white brown or green, 150mm high, and 150mm dia ball and socket type single disc assembly for tension with tension clamps for conductors, working pressure 11000 volts grade, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement 150 mm high and 150 mm dia pin type porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, suitable for working pressure 11000 Volts grade, complete all as specified and directed by Engr-in-Charge.
Dismantling of ACSR conductor any size, complete all as specified and directed by Engr-in-Charge.
Material and labour for ACSR conductor of required size for O/H lines, on HT poles, including stringing and binding wire, complete all as specified and directed by Engr-in-Charge.
Fixing only of ACSR conductor of any size obtained from item No. 42 here-in-above with required sag, including jumparing, complete all as specified and directed by Engr-in-Charge.
Dismantling and taking out damaged / rusted cross arms, of MS channel or angle section etc complete and setting aside for reuse within 50 mtrs, complete all as specified and directed by Engr-in-Charge.
M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as directed including two coats of synthetic enamel paint over a coat of red oxide primer,complete all as specified and directed by Engr-in-Charge.
Fixing only cross arms of any type & size obtained from item No.45 here-in-above,complete all as specified and directed by Engr-in-Charge.
Dismantling and taking out damaged / rusted GI earth wire / cradle guard , complete all as specified and directed by Engr-in-Charge.
Supply and fixing / stringing, galvanized steel wire 4mm dia for earth conductor, on HT poles including binding wire etc ,complete all as specified and directed by Engr-in-Charge.
Material and labour for Cradle guard by bending the 4mm GI wire in the required shape hexagonal or rectangular and fixing it on HT Line at site by incorporating the required number of reel insulators ,complete all as specified and directed by Engr-in-Charge.
Dismantling of stay assembly ,complete all as specified and directed by Engr-in-Charge.
Supply and fixing stay assembly consisting of galvanised stay wire 7 / 10 SWG stay bow of 14 mm dia, stay rod 20 mm dia 180 cm long with loop insulators stay plate 300 mm x 300 mm x 6 mm with PCC foundation 1:3:6 type C2 complete with stay clamps, bolts and nuts all as shown in electrical plate No-1 of SSR part-I of 2009. Note :- Earth work,PCC work,GI Stay strand,loop insulator,stay clamps will be measured & paid separately under relavent items,complete all as specified and directed by Engr-in-Charge.
Material and labour for danger notice plate for HT of size 25 cm x 20 cm x 1.5 mm thick mild steel sheet, synthetic enamelled white with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts ,complete all as specified and directed by Engr-in-Charge.
Material and labour for painting of 11 m steel pole and cross arms, clamp of any length and shape for HT overhead line with two coat of aluminium paint including preparation of the existing surface including marking pole numbers in a 15 cm dia yellow circle & marking three black & two yellow bands width 30 cm by enamel paint, from bottom of pole to 1.5 Mtr height, ,complete all as specified and directed by Engr-in-Charge.
M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cmx 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized iron strip 32 x 6mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel all as shown in electrical plate No 5 of MES Schedule part I with and including excavation & earth work in any type of soil, providing charcoal dust and common salt upto 15 cm above top edge of earth plate, construction of PCC pit in cement concrete 1:3:6 type C-1 with 40 mm thick RCC 1:2:4 type B-1 reinforced with 8 mm dia MS deformed bars @ 100mm center to center both ways watering arrangement with funnel and wire mesh and watering pipe of 20mm dia GI light grade and 40mm dia light grade pipe for earth lead protection and testing on completion ,complete all as specified and directed by Engr-in-Charge.
M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to pole or any other indicated situation for loop earthing etc, as required galvanised iron strip 32 x6mm,complete all as specified and directed by Engr-in-Charge.
Supply and laying GI pipe “Light Grade” in trenches, under floors, roads, along poles for protection of cables, including sealing ends size :- (Clamps to be measured and paid under respective item) ,complete all as specified and directed by Engr-in-Charge. (i) 100 mm bore
-Ditto- all as per ser item No 57 above but bore 80 mm.
Material and labour for painting of fencing and post,MS flats,MS weled mesh inside or out side power house or outdoor sub station including cleaning /preparing the old painted surface complete with two coats of aluminium paint,complete all as specified and directed by Engr-in-Charge.
Labour charges for servicing / overhauling / repairing & testing of all protection relays , CTs,PTs of 11KV 630 / 800 A of any make indoor VCB panels,complete all as specified and directed by Engr-in-Charge.
Taking out defective / wornout parts from item No: 60 at the time of overhauling and Supply & fixing new, in replacement (if required) for the following ,complete all as specified and directed by Engr-in-Charge. (i) Closing coil
-Ditto- all as per ser item No 61 above but Tripping coil
-Ditto- all as per ser item No 61 above but Spring charging motor assambly
-Ditto- all as per ser item No 61 above but PT Fuse
-Ditto- all as per ser item No 61 above but Motor cutoff switch
-Ditto- all as per ser item No 61 above but Breaker control switch
-Ditto- all as per ser item No 61 above but Roller
Taking out defective ammeter from 11 KV VCB Panels and S&F of 3 phase digital ammeter ,complete all as specified and directed by Engr-in-Charge.
Taking out defective multifuction meter from 11 KV VCB Panels and supply and fix digital multi functional meter, ,complete all as specified and directed by Engr-in-Charge.
Taking out defective multifuctional protection relay from 11 KV VCB Panels and supply and fix of REF 615 digital multi functional protecton relay with consits overcurrent, dir earth fault, combined protection, In sync for close, Frequency protection, beaker failure, Disturd rec triggered, CB conditon moniterring and supervsion of all data, complete all as specified and directed by Engr-in-Charge.
Taking down defective indication lamps and replace with new LED pilot lamps complete for VCBs,complete all as specified and directed by Engr-in-Charge.
Material and labour for painting of Transformers outer body of capacity 63 to 160 KVA including cleaning / preparing the old painted surface before spray paint of existing colour of transformer ,complete all as specified and directed by Engr-in-Charge.
-Ditto- all as per ser item No 72 above but of capacity 200 to 400 KVA Transformers of any type & size,complete all as specified and directed by Engr-in-Charge.
-Ditto- all as per ser item No 72 above but of capacity 500 to 1000 KVA Transformers of any type & size,complete all as specified and directed by Engr-in-Charge.
M&L for filtration of transformer oil to remove moisture, sludge, carbon particles and to achieve dielectric strength/rupturing capacity of oil and topping up of oil to the required level of the transformer indicator level, complete all as specified and directed by Engr-in-Charge. Note: (a) Oil topping up shall be measured and paid separately. (b) Filtration shall be done at site and on line. (c) BDV test shall be carried out before the filtration and after the filtration & results recorded in triplicate duly signed by the contractor, MES rep. and Engr-in-charge (d) Dielectric strength of the oil shall not be less than 50 kV after filtration & the rate quoted for the items shall be deemed to include the filtration till the desired dielectric strength is achieved.
Supply and Fill new transformer oil topping up / change complete superior quality having di - electric strength not less than 60 KV and ISI marked of approved make complete all as specified and directed by Engr-in-Charge. Note: (a) The transformer oil shall be ISI marked, and brought at site in sealed container only. (b) Cost of collection of samples before and after topping up/changing including testing for dielectric strength etc complete included in the rate quoted for this item
Supply and fix Copper Thimble of size 120/150/185/240/300/400 Sq mm ,complete all as specified and directed by Engr-in-Charge.
Supply and fix Aluminium Thimble of size 10/16/35/50/70/95 Sq mm ,complete all as specified and directed by Engr-in-Charge.
Supply and fix Aluminium Thimble of size 120/150/185/240/300/400/600 Sq mm ,complete all as specified and directed by Engr-in-Charge.
Disconnecting and removing LT Cables and other connections and Strip opening of Servo stabilizers of up to 100 KVA, 433 volts indoor/outdoor type of any make after unsecrewing nuts/bolts screws and connected accessories such as breather,temperature gauge for replacement of defective LT coils,replacement of drain valve, paper insulation strip, electronic cards of each phase (RYB) etc and other defective parts i.e. servo motor, Out /In terminals. (payment of defective replaced parts shall be measured and paid seperately. Re-assembling after replacing the defective coils parts and replacing the top gasket sheet and other insulating, packing materials and testing ,complete all as specified and directed by Engr-in-Charge. Note :- The reassembling element covers the assembling of parts not to be changed where as for the rest it shall be the part of the item being replaced.
M & L for replacement of servo motor of existing model and capacity incl. testing and commissioning after repair, complete all as specified and directed by Engr-in-Charge.
M & L for replacement of servo electronic card of existing model and size incl. testing and commissioning after repair ,complete all as specified and directed by Engr-in-Charge.
M & L for replacement of appoxy type CT (Current Transformer) coil suitable for 11 KV AC working pressure of copper winding with suitable guage of wire of existing model and capacity incl. testing and commissioning after repair ,complete all as specified and directed by Engr-in-Charge.
M & L for replacement of apoxy type PT (Potential Tranformer) coil suitable for 11 KV AC working pressure of copper winding with suitable guage of wire of existing model and capacity incl. testing and commissioning after repair ,complete all as specified and directed by Engr-in-Charge.
Opening up of Packaged Substation 500 KVA FBX E/12-21/C+C+T2 FBX Gas insulated switchboard 2 xswitch disconnector 630 A 1 x circuit-breaker 630 A 12 Kv 630 A 21 kA rms 3 s IEC 62271-1 Manual O -3 min - CO: circuit breaker and complete servicing of panel including following parts Earthing Switch Load Break Switch Line Isolating Switch Motorized Control Mechanism Male Female Fixed & Moving Contacts CT 30/1 A 10 PS 2.5 VA PT 11KV/110 V maintenance operations of the VDS boxes The check list is to be as per O&M manual of Schneider Infrastructure ltd and also covers following and a record maintained Verification of the presence and condition of accessories (levers, etc.) Visual inspection of the exterior (cleanliness, and ensure absence of oxidation, etc. If oxidation persists use silica gel crystal) Cleaning of external elements, with a clean, dry cloth Verification of the positioning of the status indicators (open and closed) Verification of the functioning of the mechanical control mechanism by making several maneuvers Visual surveillance of the general appearance of connections Note: Material for incorporation will be measured and paid separately as per other items of work Note: Work to be carried by OEM or it’s authorized representative or Dealer having service workshop
Material & Labour Earthing Switch 12 Kv 630 A 21kA rms 3 ,complete all as specified and directed by Engr-in-Charge.
Material & Labour load break switch 12 Kv 630 A 21 kA rms 3 ,complete all as specified and directed by Engr-in-Charge.
Material & Labour line isolating Switch 12 Kv 630 A 21 kA rms 3 ,complete all as specified and directed by Engr-in-Charge.
Replacement of a voltage indicator unit ,complete all as specified and directed by Engr-in-Charge.
Replacement of the three fuses amperage 30 A at 11 KV HRC type ,complete all as specified and directed by Engr-in-Charge.
S&F of manometer for altitudes higher than 1000 m reading up to 5000 m ,complete all as specified and directed by Engr-in-Charge.
Material & Filling of SF6 gas 3.35 Kg at 0.02 MPa sealed Pressure system in the FBX Switch as per instructions AMTNOT131-02/ AMTNOT132-02 under IEC -62271-200 Each job includes gas quantity of 3.35 Kg or more as required upto the mark at site ,complete all as specified and directed by Engr-in-Charge.
M&L servicing of Transformer side T2 function of the FBX Gas insulated switchboardThe11KV/433V 500 KVA transformer outgoing feeder using MCCB Disconnection of HT/LT sides, removal of earthing connections and servicing of Bus bar sleeves by providing Fire Retardant HT paint on the sleeve of specified thickness to achieve 12 KV dielectric strength Paint Rethimbling of all outgoing & incoming cable using aluminum thimbles & crimping tool The servicing to be carried out by Schneider Infrastructure only. Parts required to make the panel & transformers serviceable will be measured & paid separately ,complete all as specified and directed by Engr-in-Charge.
M&L ACB 1200/1250 AMP microprocessor based front operated manual with E/F & O/C protection and CT PT Drawout type.
M&L Front Connection Kit for ACB Drawout type.
M&L Top &bottom mounting ACB 1200 Amp.
S&F of MCCB microprocessor based 3 pole 36 KA 400 A.
S&F of MCCB microprocessor based 3 pole 36 KA 200 A.
S&F of MCCB microprocessor based 3 pole 36 KA 100 A.
Cutting of existing road not exc 1.5 mtr in depth and not exceeding 1.5 mtr wide including black top, sub base and WBM, well ramming in layers with watering after laying of RCC /GI pipe under road making good in all respect to match with the existing surface ,complete all as specified and directed by Engr-in-Charge.
M&L for replacement of voltmeter 0 to 500 Volts, complete all as specified and directed by Engr-in-Charge.(Digital type)
M&L fo replacement of Ammeter 0 to 500 Amps 135mmx135mm, complete all as specified and directed by Engr-in-Charge.(Digital type)
M&L fo replacement of Ammeter 0 to 250 Amps 135mmx135mm, complete all as specified and directed by Engr-in-Charge.(Digital type)
Supply and fix in replacement of drop out fuse unit expulsion type for outdoor air break gang operated switch, single pole, mounted on polymer based insulators for 11 KV working pressure, fixed to and including MS channel with nuts, bolts, washers etc, synthetic bounded fuse carrying tube complete with line taps and suitable for current carrying capacity upto 25-50Amps and connected with suitable size of ACSR conductor as jumper between GOD and DO fuse, with 11 KV HT PVC sleeve, with all fittings/accessories etc, including taking down of only 3 fuses, complete all as specified and as directed by Engr-in-charge.
S&F in repair disc insulator porcelain vitreous brown 145mm high and 255mm dia ball and socket type single disc assembly for tension with tension clampstor conductors working pressure 11000 volts complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of L Frame: Adjustable Thermal & Fixed Magnetic setting MCCB 630 Amps, 50 KA, 415 Volts four pole complete all as specified and directed by Engr-in-Charge.
S&F for aluminium strip of size 32mm x 10mm thick with necessary clamps, bolts nuts and washers of suitable size, mounted on polymer based 11 KV insulators with jumpers including removal of unserviceable one complete all as specified and directed
M&L for HT jumper with the help of Aluminium Conductor Steel Re-inforcement covered with insulating material/sleeve and including lugs at both ends at suitable at site. The length of jumper shall not be less that 2.5 meter including connection with the help of connector on the HT pole, complete all as specified and directed by Engr-in-charge.
Material and labour for painting to existing HT 2 pole structure 11 mtr long including cross arms/angle etc. with one coat of aluminium paint including preparation of surfaces with new feeder name plate with zebra type painting upto 6 feet from bottom with alternate patch of size 1 foot of white and light blue colour paint, complete all as specified and directed by Engr-in-charge.
Material and labour for painting to existing HT 4 pole structure 11 mtr long including cross arms/angle etc. with one coat of aluminium paint including preparation of surfaces with new feeder name plate with zebra type painting upto 6 feet from bottom with alternate patch of size 1 foot of white and light blue colour paint, complete all as specified and directed by Engr-in-charge.
M&L for Fixing chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire, complete all as specified and directed by Engr-in-charge.
S&F in replacement PVC LT/HT line phase seperator suitable for 2/3 wire having phase to phase gap (Spacing between the conductrs) 300mm or 380mm as per requirement, complete all as specified and directed by Engr-in-Charge.
S&F in replacement PVC LT/HT line phase seperator suitable for 4/5 wire having phase to phase gap (Spacing between the conductrs) 300mm or 380mm as per requirement, complete all as specified and directed by Engr-in-Charge.
Disconnecting the transformer any type from HT/ LT system and opening carefully for rectifying the leakage by replacing the unserviceable spare parts of capacity 100 to 250 kVA transformer and complete assembling after repairs including testing for any oil leakages, proper functioning and connecting the HT/ LT system, complete all as specified and directed by Engr-in-Charge. Note :- Defective parts replaced will be measured and paid separately
Disconnecting the transformer any type from HT/ LT system and opening carefully for rectifying the leakage by replacing the unserviceable spare parts of capacity 315 to 630 kVA transformer and complete assembling after repairs including testing for any oil leakages, proper functioning and connecting the HT/ LT system, complete all as specified and directed by Engr-in-Charge. Note :- Defective parts replaced will be measured and paid separately
Supply and fix in replacaemaent of top cover gasket set, complete all as specified and directed by Engr-in-Charge
Supply and fix in replacaemaent of radiator flanged gasket 6mm thick, complete all as specified and directed by Engr-in-Charge.
Supply and fix in repair of oil level indicator gasket set, complete all as specified and directed by Engr-in-Charge
Supply and fix in repair of HT bushing with brass studs 11 KV complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement of breather assembly transparent plastic body with top and bottom portion pressed with metallic cover, filled with silica gel blue in colour and suitable for fixing on existing pipe of size 15/20/25 mm dia with suitable reducers/connectors etc as per site requirement /capacity of transformer complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement X-volt insulating mats 2.5 mm thick in roll size of 1Mtr x 10Mtr including suitable adhesive for fixing it on the floor/surface to be laid in electrical power house/sub stations, to suit IS 15652:2006 to provide earth insulation for 11 KV voltage system complete all as specified and directed by Engr-in-Charge.
Disconnecting and removing LT Cables and other connection and strip opening of Servo stablizers of up to 100 KVA 433 Volts indoor /out door type of any make after unscrewing nuts/bolts screws and connected accessories such as breather tempreture gauge for replacement of defective LT coils /replacement of drain valve paper insulation strip electronics cards of each phase (RYB) etc and other defective parts i.e servo motor , out in terminals (payment of defective replaced parts shall be measured and paid separetly reassembling after replacing the defective coils parts and replacing the top gasket sheet and other insulating packing materials and testing, complete all as specified and directed by Engr in charge. Note :- The reassembling element covers the assembling of parts not to be changed where as for the rest it shall be the part of the item being replaced.
Disconnecting and removing LT Cables and other connection and strip opening of Servo stablizers of 250 KVA 433 Volts indoor /out door type of any make after unscrewing nuts/bolts screws and connected accessories such as breather tempreture gauge for replacement of defective LT coils /replacement of drain valve paper insulation strip electronics cards of each phase (RYB) etc and other defective parts i.e servo motor , out in terminals (payment of defective replaced parts shall be measured and paid separetly reassembling after replacing the defective coils parts and replacing the top gasket sheet and other insulating packing materials and testing, complete all as specified and directed by Engr in charge. Note :- The reassembling element covers the assembling of parts not to be changed where as for the rest it shall be the part of the item being replaced.
Disconnecting and removing LT Cables and other connection and strip opening of Servo stablizers of 630 KVA 433 Volts indoor /out door type of any make after unscrewing nuts/bolts screws and connected accessories such as breather tempreture gauge for replacement of defective LT coils /replacement of drain valve paper insulation strip electronics cards of each phase (RYB) etc and other defective parts i.e servo motor , out in terminals (payment of defective replaced parts shall be measured and paid separetly reassembling after replacing the defective coils parts and replacing the top gasket sheet and other insulating packing materials and testing, complete all as specified and directed by Engr in charge. Note :- The reassembling element covers the assembling of parts not to be changed where as for the rest it shall be the part of the item being replaced.
M&L for replacement of servo motor for upto 100 KVA of existing model and capacity incl testing and commissioning after repair, complete all as specified and directed by Engr in charge.
M&L for replacement of servo motor for 250 KVA of existing model and capacity incl testing and commissioning after repair, complete all as specified and directed by Engr in charge.
M&L for replacement of servo motor for 630 KVA of existing model and capacity incl testing and commissioning after repair complete all as specified and directed by Engr in charge
M&L for replacement of servo electronic card upto 100 KVA of existing model and size incl testing and commissioning after repair, complete all as specified and directed by Engr in charge.
M&L for replacement of servo electronic card for 250 KVA of existing model and size incl testing and commissioning after repair, complete all as specified and directed by Engr in charge.
M&L for replacement of servo electronic card for 630 KVA of existing model and size incl testing and commissioning after repair, complete all as specified and directed by Engr in charge.
M&L in replacement for Incoming Off load Changeover Switch Enclosure with 630 A Incoming change Over switch- to accommodate all connected accessories, complete all as specified and directed by Engr-in-Chage.
SUMEET TRADING CORPORATION
M/S NANCY ENTERPRISES
darshan kumar gandhi
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .