TIRUPPUR CORPORATION_Z3_GF_Providing additional facilities and Special Maintanance works to the East Side MCC at Kovilvazhi in Ward No 60

Dismantling the existing Plain cement concrete including removing the debris from the site and stacking useful material at work site for reuse etc., complete complying with standard specification.

Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification.

Plain Cement concrete 1:1½:3 mix [one cement, one and half M-sand and three course aggregate] using 20mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification.

Plastering with cement mortar 1:4 mix (one cement four P-sand), 12mm thick in all floors using clean screened M-Sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.

Painting two coats with ready mixed Plastic Emulsion paint (weather proof) of approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt and including necessary plaster of paris, putty wherever required etc., complete as per standard specifications.

Supply of the PVC Pipe of 6Ksc with ISI specification as directed by the departmental officers including cost and conveyence the same to the departmental store etc complete as per standard specification.

63mm Dia PVC Pipe

Supply and delivery of the following size of PVC Specials with ISI specification as directed by the departmental officers including cost and conveyence the same to the departmental store etc complete as per standard specification.

63mm PVC Elbow

50mm PVC Vent Cowl

PVC Adhesive

Supply and fixing of 30W LED Street Light Fitting with LED as per standard specification.

Supply and fixing of Incinerator for Ladies Bathroom etc., as directed by the Departmental Officers.

Supply and fixing of Stainless Steel 304 Insect Killer, Size 40 Liter with following specification ITEM Item - Insect Killer Mounting Type - Wall Use for - Flying insect DESIGN Shape - Rectangular tower No of UV Tubes - 4 Single UV Tube Wattage - 18 Features in Insect Killer - Front Panel Flat,Front Panel Curved,Safety switch for discharge,Removable collection tray,Moisture proof spaces between grids,U. V. Tubes,on/off Rocker switch,fuse,Fly catcher MATERIAL Material of body - Stainless Steel 304 Material of Front Jali - Stainless Steel 304 DIMENSION Chamber Volume ( in Litre ) - 40 UV Tube length(in Feet) - 1 Effective Area(in Sq Feet) - 340 square foot Minimum thickness of Sheet(in mm) - 0.7 Cord Length(in m) - 2.0 FINISH Finish - Polish POWER Power Consumption(in Watt) - 20 Watt Input power supply - Single Phase 230 V -50 Hz

Providing Steel table of size: 42" x 24" x 30" : Made out of 18 SWG CR sheet, 1" ERW tube square pipe 18 SWG, with three drawers or one drawer with cabinet L top with one coat of primer and two coat enamel paint finish.

Providing S' Type Chair with wood frame nylon wire knitted seat & back with Arm. : Made out of 1" round ERW pipe 14G pipes with one coat of red oxide and 2 coat of enamel paint finish.

Supply and Delivery of PVC Suction Hose/Pipe, Green (1-1/2" x 30 meters, Ultra Light & Flexible with PVC Spiral Ribbed for Extra Strength) with 2 male Connector Nipples + Clamps (4 Nos.)

Supplying and erecting in position of following liters capacity Industrial Model 50 Litres of Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20 Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.

Supply and fixing of 24" wall mounting fan almonard complete etc.,

Supply and fixing of 18" wall mounting fan almonard complete etc.,

Supply of the following size of160mm PVC 6Ksc Pipes and GI Pipes with ISI specification as directed by the departmental officers including cost and conveyence the same to the departmental store etc complete as per standard specification.

Lowering various size of PVC rigid /pipes and special to trench and laying to proper grade and alignment jointing with PVC couplers with cement paste and testing to the required pressure including conveyance of water for filling during testing

Dismantling the existing Floor finish and dadooing walls in cement mortar with Flooring tiles / glazed tiles / cuddapah slabs including removing the debris from the site and stacking useful material at work site for reuse etc., complete complying with standard specification.

Paving the floor with 8mm thick Joint free Rectified Glazed Ceramic Flooring Tiles of all colours in all floors over a base layer of cement mortar 1:3 [one cement and three M-sand] 20mm thick laid in-situ and pointed with the same coloured cement neatly, including polishing with electric polishers to a high degree so as to make it perfectly smooth and showing etc., complete complying with standard specification.

Supplying and fixing in position Colour glazed earthenware Oriya type INDIAN WATER CLOSET of size 580mm x 440mm of approved quality with 'P' (or) 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring around the closet using 40mm broken brick jelly in lime concrete 1:2:5 mix [one lime, two M-sand and five brick jelly] 100m thick and finishing the top to the required slope and including giving necessary connection to the cast iron soil pipes / PVC pipes by dismantling the brick masonry, reinforced concrete roof / floor slab and making good the disturbed portion to original condition without any leakage etc., complete complying with standard specification.

Supply and installation of Viberator separator Capacity of 1 ton/hr with Power 2hp motorAnd measuring of Size 3*6 feet and the installation to the required place as per instruction of Departmental officers etc complete.