REPAIR MAINT OF PATH, DRAIN, COMPOUND WALL, FENCING, GATE AND RANGES ETC IN THE AREA OF AGE BR-I UNDER GE FAIZABAD

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L for brick work with fly ash bricks in cement mortar (1:6), straight or curved on plan exc 6 m mean radius complete all as specified and directed.

Taking down cement plaster on brick walls including raking out joints, hacking for key, scrubbing down with water to receive plaster rubbish off the premises etc complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and directed.

S&F mild steel framed work as in grills, gratings, etc with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks & similar work conforming to Fe.290.Gde-E-165, including necessary welding etc complete all as specified and directed.

M&L for preparation of new steel & iron surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer over complete all as specified and directed.

M&L for cutting holes into or through brick walls exceeding half brick but n. exc one brick thick walls for inserting holdfasts and making wood dismantled portion in PCC (1:2:4) type B1 or in cement mortar (1:3) to match the existing surfaces complete all as specified and directed.

Dismantling of fencing wire any type and fixed to any type of posts, struts etc complete all as specified and as directed.

Dismantling chain link fencing / wire mesh of any type and fixed to any type of posts, struts, running bars etc complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) posts of any section, embedded in natural ground etc including taking out embedded portion and making good to distrubed ground complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) posts of any section, embedded in cement concrete etc including taking out embedded portion and making good to distrubed surfaces complete all as specified and directed.

Excavation in post holes each n.exc 0.50 Cum and getting out in soft/loose soil including returning, filling in and ramming earth and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L for PCC (1:3:6) type C2 ( using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as speicicfed and directed.

M&L for PCC (1:3:6) type C1 ( using 20 mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cill, steps, seismic and other similiar bands, plinth courses, string courses, laacing courses, parapets and railings upto 60 cm in height, bed plates, copings, kerbs, water troughs and the like includind weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled & countersunk for screws, including bending & welding angles as necessary, gusket plates, riveting etc n.exc 10.00 Kg each bracket, conforming to Fe.290 Gde-E-165 including all welding etc complete all as specified and directed.

Supply only mild steel galvanised chain link fencing of any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type, fixed to any type of standards including provision of binding wire complete all as specified and directed.

S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes including bolts, if required, hooks (stays), heavy hinges for large gates; hook and pintle hinges, large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wooden trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe.290.Gde-E-165, including necessary welding etc complete all as specified and directed.

S&F mild steel screw bolts 5 to 10mm dia and length of shank n.exc 5 cm (machine made) fully screwed with hexagonal head at one end & screwed the other or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut complete all as specified and directed.

S&F galvanized steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straning and fixing to any type of standard rails strasing bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.

S&F mild steel round bars 6 mm dia and over upto and including 10mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for providing precast cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate), set in cement mortar (1:6) in window or door cills, lintels, steps coping, kneelers, pier caps, columns, post etc with joints to match complete all as specified and directed. Note: Reinforcement shall be measured and paid for separately against respective item of Schedule 'A'.

S&F TMT steel bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F TMT steel bars 6 to 8 mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for machine pressed 60mm thick precast coloured concrete interlocking paver block of any shape and size, made of cement concrete M-35 Grade, conforming to IS-15658-2006 with grey cement and pigment, laid over sand cushioning complete all specified and directed. Note: Sand for cushioning shall be measured and paid for separately against respective item of Schedule 'A'.

M&L sand filling under floors, cushioning for laying interlocking paver blocks or in foundations including watering and consolidation complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6), set, joined and pointed in neat grey cement slurry in floors and complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 100 mm PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate), laid in panels as in floors / pavings etc complete all as specified and directed.

M&L forming contraction (Dummy) joints 65mm deep x 10mm wide filled with sealing compound Grade A complete all as specified and directed.