Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.6 LAccepted-AOC C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L1 | Accepted-AOC Being First Lowest | |
| 2 | L2₹14.4 L+₹84,804.12 (6.25%)Rejected-Finance BHAGAT SINGH CHOWK SURATGARH 335804 DISTT SRIGANGANAGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹14.5 L+₹91,701.98 (6.75%)Rejected-Finance RM 01 RIDHISIDHI I SRI GANGANAGAR 335001 RAJ | SRI GANGANAGAR | SRI GANGANAGAR | RAJASTHAN | 335001 | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹15.9 L+₹2.3 L (16.7%)Rejected-Finance | L4 | Rejected-Finance Other Than First Lowest |
Tender Value
₹15.5 L
EMD Value
₹31,000
Closing Date
8 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lalagarh Jattan
GE Lalagarh Jattan
PROVN OF REVENUE AND MINOR WORKS AT LGJ MIL STN
2024_MES_641585_1
8934-60/GE/23-24
Open Tender
Coal Works
Item Rate
180 days
GE Lalagarh Jattan
As per tender document
8 documents required · 8 mandatory
₹500
GE Lalagarh Jattan
₹31,000
Yes
1 Apr 2024
9 Feb 2024
11 Mar 2024
9 Feb 2024
8 Mar 2024
23 Feb 2024
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed by Engineer-in-charge.
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations, shafts, wells, cesspits, manholes, laying pipe line, laying of cables or fixing poles and stays and struts etc. not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.
Material and labour for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling & mass concrete complete all as specified and as directed by Engineer-in-charge.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified & directed.
M&L for brick work with fly ash bricks straight or curved on plan any radius half brick thick walls, built in cement mortar (1:4) all as specified & directed.
M&L for 40mm thick damp proof course in cement concrete 1:2:4, type B-0, 12.5 mm graded stone aggregate to horizontal or vertical surfaces including necessary formwork complete all as specfied and directed by Engr-in-Charge.
M&L for reinforced cement concrete type B1 1:2:4 using 20mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, copings, bed plates,and the like including weathering, slightly rounded or chamfered angles and throating,incl formwork all as specified & directed. Note :- Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
M & L Reinforced cement concrete (1:1.5:3) type B-1 using 20mm graded stone aggregate as in Foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and directed by Engineer - in – Charge. Note :- Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
M & L Reinforced cement concrete (1:1.5:3) type A-1 using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed by Engineer - in – Charge. Note :- Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
M & L Reinforced cement concrete (1:1.5:3) type A-1 using 20mm graded stone aggregate as in Beams,cantilevers,bressumers,lintels over 1.5m clear span complete all as specified and directed by Engineer - in – Charge. Note :- Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
Material and labour for reinforced cement concrete (1:1.5:3) type A-1 nominal mix using 20mm graded stone aggregate as in slabs supported on walls, beams and columns landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
Material and labour for mild steel TMT bars 5mm dia and over as in stirrups, spacers and binders cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose)
M & L for Formwork to fair finished surfaces of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.complete all as specified & directed by Engineer-in- charge.
M & L for Formwork to fair finished surfaces of Formwork to sides of pillars, posts, struts, piers, columns and stanchionscomplete all as specified & directed by Engineer-in- charge.
M & L for Formwork to fair finished surfaces of sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified & directed by Engineer-in- charge.
M & L for Formwork to fair finished surfaces soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified & directed by Engineer-in- charge.
M & L for Formwork to fair finished surfaces to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified & directed by Engineer-in- charge.
Returning and filling including spreading, leveling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and as directed by Engineer-in-charge.
Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge.
M&L for broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15cm thick,watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge
M&L for 75 mm thick PCC type C-2,1:3:6 using 20 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.
Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for rendering/plastering 15mm thick in cement mortar (1:6) on any face of walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for Non Skid ceramic coloured tiles (jointless) 7 to 8 mm thick square or rectangular area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement over and including 15mm thick screed base in CM (1:6) complete all as specified and directed by Engineer-in-Charge.
Material and labour for Non Skid ceramic coloured tiles (jointless) 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, laid in floor. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick rendering in cement mortar (1:6) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.
Material and labour for joint free Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement over and including 15mm thick screed base in CM (1:6) complete all as specified and directed by Engineer-in-Charge.
Material and labour for Non Skid ceramic coloured tiles (jointless) 7 to 8 mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.
M&L joint free glazed ceramic coloured tiles (350 x 250)/(450 x 350) mm x 7mm thick as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.
Material and labour for 25mm thick PCC (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in sub base and finishing surface of concrete topping as even & smooth to receive the topping layer complete all as specified and as directed by Engineer-in-charge.
Material and labour for 75mm thick PCC (1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed by Engineer-in-charge.
M&L for two coats of acrylic distemper on newly plastered surfaces of walls paint over 3mm thick wall care putty including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M & L rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified & directed by Engr-in-charge.
Material and labour for preparing newly plastered or pointed surface of ceiling by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge
Material and labour for preparing newly plastered or pointed surface of wall by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge
Material and labour for preparation of new plastered or pointed surface of walls/pillars /cornices by sand papering or by any other mean and after preparing the surfaces applying two coats of cement base paint as approved tint/colour over a one coat of priming paint complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new steel surface of any description not exc. 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-charge.
M&L for preparation of new steel surface of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-charge.
S&F vitreous china wash hand basin coloured Flat back of size 580x450mm, including 32mm dia chromium plated waste coupling long screwed shank and fly nut, flanged end bedded in red led cement and other end fixed and PVC waste pipe including cutting for and pinning in ends of brackets in CM 1:3 all as specified .
Supply & fixing 450 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.
Supply & fixing pillar tap cast copper alloy with capstan head, chromium plated, fancy type screwed down, high pressure with or without letter 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of tap shall be as given in SSR or in relevant IS
S&F CP stop/angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type fixed complete all as specified and directed by Engineer-in-Charge.
S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as specified and directed by Engineer-in-Charge.
S&F 20 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as specified and directed by Engineer-in-Charge.
Supply & fixing rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top), ISI marked hoisted and fixed in position of capacity 1000 litres including out let connection complete all as specified & directed by Engineer-in-charge.
Supply & fixing rotational moulded polyethylene water storage tank (cylindrical vertical tripple layered with closed top), ISI marked hoisted and fixed in position of capacity 500 litres including out let connection complete all as specified & directed by Engineer-in-charge.
S & F ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm dia pipe complete all as specified and directed. Note: Minimum weight 20 mm - 210 gms
S&F for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore complete all as specified and directed
M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set cement mortar 1:4 as in cover slabs (for manholes etc,) chajjas, shelves and similar articles with plain faces complete all as specified and directed by Engr-in-charge.
S&F for powder coated aluminium frame for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge. Make of Al Section : Jindal / Hindalco / NALCO
S&F for powder coated anodised aluminium door shutters,, aluminium sections weighing exc 0.55 Kg/m including necessary necessary joining cleats, glazing clips, rubber neoprene packing, handles 1 Nos in each door, hinges (02 Nos), anodised aluminium snap beading, screws, complete all as specified Make of Al Section : Jindal / Hindalco / NALCO
S & F 4.8 mm thick sheet glass, ordinary quality and glazing with aluminium snap beading of any size of glass in each pane with solar control film 25 micron reflective type sticked to glass panes as per instruction of manufaturers all as specified and directed. (Aluminum snap & rubber gasket including in the item for shutters)
Supply & fixing, 4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified & directed by Engineer-in- charge.
supply & fixing, Figured glass, pin head type 4 mm thick and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified & directed by Engineer-in- charge
S&F stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290-0 or grade E- 165 complete all as specified and as directed
S&F for 150 mm dia (internal) Sail-glazed stoneware drain pipes grade A quality laid in trenches and jointed in CM 1:2 and tested after the pipes are laid jointed complete all as specified and directed by Engr-in-charge.
M & L for in Cement concrete 1:3:6 type C2 bed to drain pipes 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; etc complete all as specified and directed.
M&L Machined pressed precast concrete interlocking paver block glossy with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80mm thickness M-35 grade with over sand cushion all as specified and directed. Note: sand filling paid seperately.
M&L for sand filling under interlocking tiles or in foundation including watering and consolidation all specified and directed
M & L cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in benching /haunching manhole including forming channels Complete all as specified.
S&F for grating doom CP 125 mm dia with or without waste hole, fixed on floor /nahani traps etc complete all as specified and directed
M & L rendering 15 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of roof surface finished even and smooth without using extra cement complete all as specified & directed by Engr-in-charge.
M&L for cleaning of old roof wall/concrete surface & applied a coat of cold bituminous primer over cleaned surface @ 0.40 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum wt 3.6 kg/sqm reinforced with polyester non woven febric(weight not less than150 gms/sqm) manufactured by Ms STP Ltd/IWL India Ltd or its equivalent, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if requried complete all as specified and directed.
M & L for cement concrete tiles 25cm x 25cm x 22mm thick, m a c h i n e pressed with grey cement and pigment over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment and no pigment in floors/roof, and cut and polished complete all as specified and directed.
Supply only integrated water proofing compound complete all as directed by Engr-in-charge.
S&F drapery curtain rod 25mm dia fancy type, pretreated plastic coated natural colour ,fabricated out of mild steel sheet not less than 20 guage, with decorative end knobs complete with brackets and fixed on wall including taking down old existing curtain rods any description with accessories complete all as specified and directed by EIC.
Material and labour 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding the edges half round on exposed side over and including 20mm thick screed base in CM (1:6) complete all as specified and directed by Engineer-in-Charge.
S&F for 15mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.
Supply & fixing, factory made steel ventilators with top hung shutters including hinges with steel peg stay, fixing lugs in PCC (1:2:4) type B-1 and making good complete all as specified & directed by Engineer-in- charge.
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge
Supply and fixing to factory made 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.
Supply & fixing 100mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised type B-21 and fixed complete all as specified and as directed by Engineer-in-charge.
Supply & fixing aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified & directed by Engineer-in-charge.
Supply & fixing aluminium handles anodised cast type 150mm long complete all as specified & directed by Engineer-in-charge.
S & F Vitreous China urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe including PVC waste pipe 32mm bore urinal spreader of PTMT complete all as specified and directed.
S&F for vitreous china white wash down water closet pan, padestal pattern, white, including fixing bolts, but excluding flushing cistern and flush pipe and connection to drain (or out going pipe) etc. complete and making good to floor all as specified and directed
S&F for PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle flush pipe 32mm dia, for low level cistern of polyethylene of low or high density or PVC, and connection to pipes complete all as specified and directed by Engineer-in-Charge.
Supply and fix bib taps, cast copper alloy fancy type chormium plated long body fancy type. with Capastan head screwed down screwdd for iron pipe of brass ferrule, and fixed in 15 mm bore dia of pipe complete all as specified and directed by Engr-in-charge.
S&F for tubular towel rail, Brass chromium plated 20 mm dia, 'D' type, 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge.
S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls complete all as specified and directed by Engineer-in-Charge.
S&F 75 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls complete all as specified and directed by Engineer-in-Charge.
S & F PVC SWR bends any radius, 110 mm bore complete all as specified and directed by Engr-in-charge.
S & F PVC SWR bends any radius, 75 mm bore complete all as specified and directed by Engr-in-charge.
S & F for PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed by Engr-in-charge.
Supply & fixing PVC (SWR) vent cowl 110mm bore complete all as specified & directed by Engineer-in- charge.
S&F PVC (SWR) floor trap 75mm dia with grating including jointing with solvent cement complete all as specified and directed.
M&L PVC (SWR) gully trap 125/110mm, seting and jointing with solvent cement complete all as specified and directed.
Supply and laying DWCPE (SN8) 180 (OD)/163 (ID) mm diameter drain pipes as per IS-16098 (Part-II), laid in trenches on PCC bed to required slope, including all accessories/fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge. Note : PCC and earth work shall be measured and paid separately.
M & L for size 1.8 m dia x 3.00 m effective depth of soakage well excavation in any type of soil, foundation in PCC 1:3:6, wall of honey combed mansory, with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick mansonry in CM, RCC cover slab in M-25, SFRC cover inter connection pipe of RCC/DWC complete filled with brick bats all as specified and directed (Ref Drg No BTD-804)
M&L point wiring for one light / fan/exhaust fan point controlled by one switch with 1.5 Sqmm (nominal cross section area) PVC insulated unsheathed multistranded copper conduct cable in and including medium grade rigid PVC concealed conduit in wall after cutting chases in wall including cast iron or pressed steel terminal box covered with and including 3 mm thick bakelite sheet top cover fixed flush with wall using brass screws, washers and 1.5 Sqmm single core PVC insulated unsheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly and making good diturbed surfaces in cement motar 1:3 complete all as specified and directed.
,---ditto--- all as per srl item No 98 above butOne 3 pin socket outlet 5 amps on the same board with other switches,
,---ditto--- all as per srl item No 98 above butOne 3 pin socket outlet, 5 amps, indepe ndent,
,---ditto--- all as per srl item No 98 above but point wiring with 4 sqmm multi stranded conductor cable and 2.5 sqmm unsheathed copper conductor earth wire for two in one 5 pin 15 Amps socket outlet on independent board complete all as specified and directed.
Supply and fix piano swith flush button single pole one way 5 Amps complete all as specified and directed
Supply and fix piano swith flush button single pole one way 15 Amps complete all as specified and directed
Supply and fix piano socket 2 in 1, 2/3 pin 5 amp flush type 240 volts AC complet all as specified and as directed
Supply and fix socket 2 in 1, 3 pin 5 amp and 15 amp flush type 240 volts AC complet all as specified and as directed
Supply & fix batton integrated LED light fitting 1 x20 integral sleek polycarbonate LED channel with white acrylic cover to roof/ceiling/wall with necessary wooden/PVCblocks etc and connecting with 2 core flexible PVC insulated multistranded copper conductor from ceiling rose to fitting complete all as specified and directed including taking down old one. Note : (i) with lumen efficiency in excess of 100 Lumans per watt and driver effeciency >85% (withpf>0.95) (ii) CRI >80
Supply and fix ceiling rose surface bakelite two to three terminals/plate 5 amps complete all as specified and directed by Engr-in-Charge.
S & F Modular step type fan regulator 120 watt , 2 module complete all as specified, 2 module complete all as specified and directed.
S & F factory made sheet metal distribution boards, SPN, 4 way; double door, protection class IP-30 suitable for mounting MCB, conforming to IS- 8623 with 200 Amps rated copper bus bar suitable for working on 240 volts AC supply complete all as specified & directed.
S & F MCB SP 6 to 32 Amp, 240 Volts, rupturing capacity 9 KA confirm to IS- 8828- 1996, IEC - 60898 complete all as specified & directed.
S & F MCBs 10 KA confirm to IS-8828 : 1996, IEC 898 : 1995 ruputing capacity of SP & N 32 Amp all as specified and directed by Engineer-in-Charge
S&F metal body heavy duty exhaust fan 300 mm sweep single phase 50 Hz with louvers including fastners for fixing the fan including making hole on wall and fixing in PCC (1:2:4)complete all as specified and as directed. Make Bajaj/ Khaitan/Usha/Orient.
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:2:4) type B-1 and CI cover with frame all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 10 cms above ground level. (ii) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber. (ii) GI wire upto DBs earth connection is included in this item. (iii) Water pipe shall be provided in slanting position
Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE-two run of 6 sq.mm & One run of 4 sq.mm & One run of PVC conduit with accessories shall be measured as One length complete all as specified and directed.
M&L for ceiling fan 1200 mm sweep single phase 50 Hz with down rod and canopy, fan blades, electronic fan regulator etc. incl making connection with three core PVC copper wire complete all as specified and directted. Make Bajaj/ Khaitan/Usha/Orient.
Supply, laying and testing of Cable of size 6 Sqmm, 2 core, 1100 Volt grade heavy duty with PVC insulated, stranded aluminium conductor served with an inner sheathening of PVC tape armoured with Galvanized steel strip or wire and over all PVC Sheathed stranded conductor in service connection suspended by insulating hangers not less than 1 metre apart including 4 mm GI suspended wire and necessary connections and suitable size of thimbling complete all as specified and as directed by Engineer-in-charge.
Supply and laying XLPE LT Cable of size 10 Sqmm, 2 core, 1100 Volt grade heavy duty with XLPE insulated, stranded aluminium conductor served with an inner sheathening of PVC tape armoured with Galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS- 7098 (Part-I) with latest amendments laid in trenches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and as directed by Engineer-in-charge. Note :- (i) Excavation, earth work, sand cushioning, brick protection, cutting of road and pipe shall be measured & paid separately under appropriate item of BOQ.)
Supply and fixing lamp holder, PVC / polycarbonate type with back plate complete all as specified and directed by Engineer-in-Charge
S & F LED building security light fitting 35 watt with epoxy powder coated sheet aluminium housing, with epoxy powder coated CRCA sheet steel grey tray, clear acrylic cover and accessories complete incl street light bracket made out of 25 mm dia GI light grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer after taking down old u/s one.
M & L sand cushioning with dry coarse sand to under ground cable 230 mm deep (80 mm below and 150 mm above the cable) complete all as specified and directed
M & L brick protection with sub class 'B' brick laid flat across the cable complete all as specified and directed
Supply and fixing PVC Blanking Plates with internal lock complete all as specified and as directed.
Supply & fix fresh air fan 230 mm sweep, single phase 230v 50 Hz plastic body with louvers, including grouting with fasteners, nuts/bolts etc complete all as specified and directed by Engineer-in-Charge
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
M/S Shree Ram Enterprises
KHANNA CONSTRUCTIONS
Dashmesh Construction Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .