ANNUAL MAINTENANCE AND UPKEEP OF MEHTAB-BAGH, AGRA

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (Rate including G.S.T.)

Providing and laying in position cement concrete 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering as per direction of Engineer-in-charge. (Rate including G.S.T.)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand). (Rate including G.S.T.)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). (Rate including G.S.T.)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of Engineer in-charge. (Rate including G.S.T.)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Rate including G.S.T.)

Providing & Fixing of 4 MM ACP Sheet including required size of hole etc. (Rate including G.S.T.)

Providing & Fixing of 50 micron thick graphic film including laminated & printed sheet pasted on ACP sheet with required adhesive material & labour complete in all respect. (Rate including G.S.T.)

Providing and fixing 5 mm thick acrylic sheet in Panel frame fixed with make holes where necessary. (Rate including G.S.T.)

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meters or as desired by Engineer in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Rate including G.S.T.)

12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand). (Rate including G.S.T.)

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm). (Rate including G.S.T.)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. (Rate including G.S.T.)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer - in- charge. (Rate including G.S.T.)

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. (Rate including G.S.T.)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. (Rate including G.S.T.)

40 mm thick Red Sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. (Rate including G.S.T.)

Repair & Fixing charges of Old M.S. Angle Iron, hollow pipe, wire mesh jali, flat, G.I. profile sheet (for keeping of garden equipment & materials store room size-5.00 m x 4.50 m) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of Engineer in-charge. (Rate including G.S.T.)

Providing & Fixing M.S. Gate size 4.30 x1.70 m of required design frame with 50 x50x6 mm angle, 50x6 mm M.S. Flat in cross position, 16 mm square bar between vertical position c/c 10 cm distance, 2mm thick MS Sheet for gate corner & center position, 10 mm sq.bar for write of ASI & Hinges, lock arrangements etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of Engineer in-charge. (Rate including G.S.T.)

Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in Superstructure with Cement mortar 1:4 (1 cement : 4 coarse sand) . (Rate including G.S.T.)

Provision for S.S. Fastner/bolt/spacar with washer. (Rate including G.S.T.)

Baba Construction