REPAIR, POLISHING AND PAINTING TO WOODEN AND STEEL FURNITURE OF CERTAIN UNITS IN JORHAT MILITARY STATION UNDER GE JORHAT

Amount

BED NEWAR/BED PLY TOP (FD-245/246/247) (a) Taking down carefully existing unserviceable long rail and replacing the same with new well seasoned 2nd class hard wood complete all as specfied and directed.

(b) Taking out old decayed plywood facing from inner / outer head board and S&F 4mm (3 ply) thick decorative veneered plywood Gde-I quality (BWR resin) with one side teak face decorative type fixed with rubber adhesive SH Make : fevicol in the same position including 4mm thick teak wood edging complete all as specified and directed and as shown on drawing.(Make : KITPLY/GREENPLY/CENTURY )

(c) All as per item No 1.01 above but for foot board complete all as specified & directed .

(d) Taking out unserviceable worn out cotton newar or plywood top form bed newar/bed plywood top and S&F new plywood 12mm(7 play) thick commercial grade BWR type BB of required shape and size fixed withy new screws to wooden rail complete all as specified & as directed and as shown on drawing.

(f)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed. (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Table 900x600 mm with drawer(FD-223/283):- (a) Taking down carefully existing unserviceable top of table and S&F 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I, ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITA CHAMPA/ BONSUM /HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over and including a coat of pink primer complete all as specified & as directed and as shown on drawing.

(b) Taking down old existing unserviceable leg and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

c) Taking out old damaged/decayed long rail from its position and S & F new long rail in the same position as per existing shape and size made out of well seasoned ‘2nd CLASS WOOD’ timber complete complete as specified and as directed.

(d) All as per item No 2.02 above but for short rail complete all as specified & directed .

e) Taking out old damaged/decayed drawer from its position and S & F new drawer as per existing shape and size made out well seasoned ‘TEAK WOOD’ timber complete all as specified and directed

(f)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Table 900x600 mm with out drawer(FD-224/284):-(a) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over and including a coat of pink primer complete all as specified & as directed and as shown on drawing.

(b) Taking down old existing unserviceable leg and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

(c) Taking down old existing unserviceable long rail and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

(d) Taking down old existing unserviceable short rail and replacing the same with new one made out of 2nd class seasoned hard wood and applying two coat of French polish with glossy finish to match the existing surface complete all as specified & as directed and as shown on drawing.

(e)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed. (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Teapoy(FD-34,232/278):- (a) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over and including a coat of pink primer complete all as specified & as directed and as shown on drawing. (Make : KITPLY/GREENPLY/CENTURY )

(b) Taking down old existing unserviceable leg and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

(c) Taking down old existing unserviceable long rail and replacing the same with new one made out of 2nd class seasoned hard wood and complete all as specified & as directed and as shown on drawing.

(d) Taking down old existing unserviceable short rail and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

(e)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed. (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Table centre(FD-274,235,375):- (a) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with widht equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over including a coat of pink primer complete all as specified & as directed and as shown on drawing. (Make : KITPLY/GREENPLY/CENTURY )

(b) Taking down old existing unserviceable leg and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

(c) Taking down old existing unserviceable long rail and replacing the same with new one made out of 2nd class seasoned hard wood to match the existing surface complete all as specified & as directed and as shown on drawing.

(d) Taking down old existing unserviceable short rail and replacing the same with new one made out of 2nd class seasoned hard wood and to match the existing surface complete all as specified & as directed and as shown on drawing.

(e)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Peg Table(FD-277/384/236) :- (a) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with widht equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over a coat of pink primer complete all as specified & as directed and as shown on drawing. (Make : KITPLY/GREENPLY/CENTURY )

(b) Taking down old existing unserviceable leg and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

(c) Taking down old existing unserviceable long rail and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

(d) Taking down old existing unserviceable short rail and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

(e)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Table Dining for 8 persons(FD-239/273):- (a) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over a coat of pink primer complete all as specified & as directed and as shown on drawing.

(b) Taking down old existing unserviceable leg and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

(c) Taking down old existing unserviceable long rail and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

(d) Taking down old existing unserviceable short rail and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

(e)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Table writing(FD-249/275) :- (a) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over a coat of pink primer complete all as specified & as directed and as shown on drawing.

(b) Taking down old existing unserviceable leg and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing

(c) Taking down old existing unserviceable long rail and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing

(d) Taking down old existing unserviceable short rail and replacing the same with new one made out of 2nd class seasoned hard wood all as per drawing and as directed.

(e)Taking down old existing unserviceable drawer and front shutter and replacing the same with new one made out of planks for drawer frame and 6mm plywood (5ply) BWR for bottom and 18/19 mm thick prelaminated particle board exterior grade one side with decorative lamination & other side balancing white lamination for shutter and 4mm thick 2nd class seasoned hard wood beading all round complete all as specified & as directed and as shown on drawing

(f)Taking down old existing unserviceable/broken back portion of cabinet and replacing the same with new made out of 6 mm ply wood (5 ply) commercial BWR type BB complete all as specified & as directed and as shown on drawing.

(e)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Table dining for 6 Persons(FD-239/273) :- (a) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with widht equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over a coat of pink primer complete all as specified & as directed and as shown on drawing.

(b) Taking down old existing unserviceable leg and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing

(c) Taking down old existing unserviceable long rail and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

(d) Taking down old existing unserviceable short rail and replacing the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing.

(e)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed. (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Chair Easy(FD-201/229) :- Taking out unserviceable portion of chair easy and replace the same made out of 2nd class seasoned hard wood the following :- complete all as specified & as directed and as shown on drawing. (a) Front legs of size 535x55x25mm

(b) Rear legs of size 620x60x25mm

(c ) Handles of size 610x55x25mm

(d) Seat frame as shown on drawing

(e) Back frame as shown on drawing

(f)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Chair Writing(FD-280/250) :- Taking out unserviceable portion of chair writing and replace the same made out of 2nd class seasoned hard wood and match with the existing complete all as specified & as directed and as shown on drawing. (a) Front legs of size 675x30x55mm

(b) Rear legs of size 890x30x55mm

(c ) Handles of size 490x60x25mm

(d) Front rails of chair writing as shown on drawing

(e) Side rails of chair writing as shown on drawing

(f) Stiffeners of size 25mmx 19mm in section shall be provided of chair writing

(f)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer complete all as specified and as directed. (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Chair dining(FD-279,228) : Taking out unserviceable portion of chair dining and replace the same made out of 2nd class seasoned hard wood and match with the existing for the following,complete all as specified & as directed and as shown on drawing - (a) Front legs of size 460x55x30mm

(b) Rear legs of size 890x55x30mm

(c) Front and back rails of size 30x65mm in section of chair dining

(d) Side rails of chair dining

(e) Stiffeners of size as shown in drg

(f) M&L for removal of old existing unserviceable cane from existing Chair Dining and replacing the same with new 4mm thick PVC seat with 4x10mm ribs moulded alongwith seat in single piece with holes, screwed to existing frame all as shown in Drg No FD/MAP-II/05 (Chair Dining JCO/ORs) Sheet 1/1 Date: 08/07/2011,complete all as specified and directed. Note:- These drawings are not enclosed with the tender documents, bidders are deemed to be in possession of all standard furniture drawings amended up to date as issued by AHQ, E-in-C’s Branch, New Delhi. These drawings may however be available for perusal in this Office, during working hours

(f)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Canning : M&L for removal of old existing underviceable cane from following chairs and replacing the same with new 2mm oval type cane plastic and bordering with 3mm wide cane plastic oval type complete all as per drawing specification and as directed. :(a) Chair Easy (FD-201/229)

(b) Chair Writing (FD-280,250)

(c) Stool dressing CB (FD-252)

(f) Stool dressing CB (FD-252)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Chair Dining Officers (MAP) (FD/MAP-II/04) :- Taking out unserviceable portion of chair dining MAP and replace the same made out of 2nd class seasoned hard wood and match with the existing through for the following :-complete all as specified & as directed and as shown on drawing (a) Front legs of size 35x50x450mm

(b) Rear legs of size 35x50x450mm

(c) Front rails of size 65x25 mm

(d) Side rails of size 25x65mm

(e) Rear rails of size 25x90mm

(f) Stiffeners of size 25mmx 20mm

(g) Seat for chair shall be removable and of size 75mm thick 50 density foam with fabric on seat of 12mm thick ply

(h) Stopper shall be fixed on seat of size 75x75x25mm 2nd class seasoned wood with main frame and legs

(j) Nylon buffers

(k) Back frame of size 35x50mm

(l) Back frame vertical strips of size 15x30mm

(m) Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Sofa Set 4 Seater(FD-281/373):- Carefully taking out the damaged/broken parts of sofa set 4 seater and replace the same with new parts of appropriate size complete all as specified & as directed and as shown on drawing (a) Legs shall be of 2nd class well seasoned hard wood 70x35mm in section made to shape and fix with frame complete all as specified & as directed and as shown on drawing

(b) Handle as shown on drawing

(c) Side rails made out of well seasoned 2nd class hard wood Side rails shall be of 100x35mm in section made to shape and fixed with existing frame as shown on drawing.

(d ) Front rails made out of well seasoned 2nd class hard wood of size 100x35mm in section made to shape and fixed with existing frame of single seater as shown on drawing.

(e)All as per item no.16.3 as above but Rear rail complete all as specified and directed

(f) Wooden batten for seat made out of well seasoned 2nd class hard wood of size 40mmx30mm in section made to shape.as shown on drawing.

(g) Wooden batten for back rest made out of well seasoned 2nd class hard wood of size 40mmx30mm in section made to shape.as shown on drawing.

(h) Foam cushion of size 550 x 550 x 100 mm thick of density 032 with cushion covered with tapestry cloth (costing not less than Rs 250.00 per meter) over a cover of marking cloth of best quality including stitching, forming and lining. complete all as specified & as directed and as shown on drawing. Make : DUNLOP / KURLON/GODREJ

(m) Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Sofa Set 5 Seater(FD-281/373):- Carefully taking out the damaged/broken parts of sofa set 5 seater and replace the same with new parts of appropriate size and match with the existing complete all as specified & as directed and as shown on drawing(a) Legs shall be of 2nd class well seasoned hard wood 70x35mm in section made to shape and fix with frame as shown on drawing

(b) All as per item no.17 as above but Handle

(c) Side rails made out of well seasoned 2nd class hard wood. Side rails shall be of 100x35mm in section made to shape and fixed with existing frame as shown on drawing.

(d ) Front rails made out of well seasoned 2nd class hard wood of size 100x35mm in section made to shape and fixed with existing frame of single seater as shown on drawing.

(e) Front rail ditto as ser No 17 (d) but for front rail of 3 seater

(f) Wooden batten for seat made out of well seasoned 2nd class hard wood of size 40mmx30mm in section made to shape.as shown on drawing.

(g) Wooden batten for back rest made out of well seasoned 2nd class hard wood of size 40mmx30mm in section made to shape.as shown on drawing.

(h) Foam cushion of size 550 x 550 x 100 mm thick of density 032 with cushion covered with tapestry cloth (costing not less than Rs 250.00 per meter) over a cover of marking cloth of best quality including stitching, forming and lining. complete all as specified & as directed and as shown on drawing. Make : DUNLOP / KURLON/GODREJ

(J) Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Table 900x900x760mm(FD-(88),291):- (a) Taking down old existing unserviceable leg and replace the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing

(b) Taking down old existing unserviceable long rail and replace the same with new one made out of 2nd class seasoned hard wood complete all as specified & as directed and as shown on drawing

(c) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with widht equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss synthetic enamell paint over a coat of pink primer complete all as specified & as directed and as shown on drawing

(D) Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Side Board (FD-241):-(a) Taking down old existing unserciable/broken top and replacing the same with new top made out of 18/19 thick Medium Density Fibre (MDF) exterior grade ISI marked with exposed face covered with 1mm thick decorative laminates Type-I(ISI marked) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from defects complete all as specified & as directed and as shown on drawing

(b) Side Board (FD-241):-Taking down existing unserviceable back of side board replacing the same with new made out of 6 mm ply wood (5 ply) commercial BWR type BB. complete all as specified & as directed and as shown on drawing

(c)Side Board (FD-241)Taking down old existing unserviceable drawer and front shutter and replacing the same with new one made out of planks for drawer frame and 6mm plywood(5 ply) BWR type BB for bottom and 18/19 mm Medium Density Fibre (MDF) exterior grade ISI marked with exposed face covered with 1mm thick decorative laminates Type-I(ISI marked) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from defects complete all as specified & as directed and as shown on drawing

(d) Side Board (FD-241)Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Table Dressing Ladies (FD-251):- (a)Taking down old existing unserviceable table top and replacing the same with new top made out of 18/19 mm Medium Density Fibre (MDF) exterior grade ISI marked with exposed face covered with 1mm thick decorative laminates Type-I (ISI marked) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITA CHAMPA/ BONSUM/ HOLLOCK free from defects complete all as specified & as directed and as shown on drawing

(b) Taking down unserviceable Legs and replacing the same with new one made out of 2nd class seasoned seasoned hard wood complete all as specified & as directed and as shown on drawing

(c) Taking down unserviceable long stiffner and replacing the same with new one made out of 2nd class seasoned seasoned hard wood complete as per drawing and as directed

(d) Taking down unserviceable mirror frame and replacing the same with new one made out of 2nd class seasoned seasoned hard wood and 6mm ply for back portion complete all as specified & as directed and as shown on drawing

(e) Taking down unserviceabe mirror and replacing the same with new one of size 1220mm x 365mm x5mm thick make -modiguard/Atul/Golder fish and fixed with frame complete all as specified & as directed and as shown on drawing

(f) Taking down unserviceable sliding glass and replacing the same with new Glass approved quality of size300x290 x5 mm thick approved quality. complete all as specified & as directed and as shown on drawing

(g) Table Dressing Ladies (FD-251):Complete removal of existing painting/polish and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss.)

Chair Verandah(FD-256):- (a) Material and labour for removal of unserviceable cane from Chair Varendah and replacing the same with 4mm half round cane best quality. Caning to be done in godrej pattern PVC shoe shall be provided to bottom of each leg complete all as specified & as directed and as shown on drawing.

(b) M & L for derusting & preparing exposed steel surfaces of chair verandah and applying two coat of synthetic enamel paint (white) over including one coat of red oxide zinc chrome primer complete all as specified and directed

Locker Bed side Steel(FD-1029) : (a) Taking down unserviceable Door shutters steel and S&F new door shutter made out of 1.00mm thick Mild steel plain black sheet, including applying two coats of synthetic enamel paint (Olive green) over a coat of red oxide by spray painting after complete removal of existing treatement and preparation of surface complete all as specified & as directed and as shown on drawing

(b) Taking down unserviceable steel legs and S&F new legs made out of mild steel plain black Iron sheet of 1mm thick duly welded and applying two coat of synthetic enamel paint (olive green ) over a coat of Red oxide by spray painting including surface preparation complete all as specified & as directed and as shown on drawing

(c) Taking down unserviceable handles and S&F new handles chromium plated of size 100mm complete all as specified & as directed and as shown on drawing

(d) Taking down unserviceable hasp & staple and S&F new hasp & staple cromium plated of size 75 mm complete all as specified & as directed and as shown on drawing

(e) Taking down unserviceable hanging rod and S&F new aluminium hanging rod 19mm complete all as specified & as directed and as shown on drawing

(f) Taking down unserviceable shelves and S&F new shelves made out of 1.00mm thick MS plain black sheet including applying two coats of synthetic enamel paint (olive green) over one coat of primer by spray painting including necessary prepration of surfaces and complete removal of existing treatment all as specified & as directed and as shown on drawing

Almirah Med Steel with Shelves(FD-1032) : (a) Taking down unserviceable lock and S&F new 3 way lock, 6 lever of stainless steel with duplicate key complete all as specified & as directed and as shown on drawing. Make : Godrej/Harrison

(b) Taking down unserviceable shelves and S&F new shelves made out of 1.00mm thick MS plain black sheet including applying two coats of synthetic enamel paint (olive green) over one coat of primer by spray painting including necessary prepration of surfaces complete all as specified & as directed and as shown on drawing

(c) Taking down unserviceable steel legs and S&F new legs made out of mild steel plain black Iron sheet of 1mm thick duly welded and applying two coat of synthetic enamel paint (olive green ) over a coat of red oxide zinc chrome primer by spray painting including surface preparation complete all as specified & as directed and as shown on drawing

(d) -Taking down unserviceable locking assy and S&F new one complete all as specified & as directed and as shown on drawing

(e) Taking down unserviceable handle and S&F with new handle chromium plated screw type of size 150mm with nut and washer including necessary welding to make good the surface complete all as specified & as directed and as shown on drawing

Almirah Large Steel with Shelves(FD-1031) : (a) Taking down unserviceable lock and S&F new 3 way lock, 6 lever of stainless steel with duplicate key complete all as specified & as directed and as shown on drawing. Make : Godrej/Harrison

(b) Taking down unserviceable shelves and S&F new shelves made out of 1.00mm thick MS plain black sheet including applying two coats of synthetic enamel paint (olive green) over and including one coat of red oxide zinc chrome primer by spray painting including necessary prepration of surfaces after complete all as specified & as directed and as shown on drawing

(c) Taking down unserviceable steel legs and S&F new legs made out of mild steel plain black Iron sheet of 1mm thick duly welded and applying two coat of synthetic enamel paint (olive green ) over a coat of red oxide zinc chrome primer by spray painting including surface preparation complete all as specified & as directed and as shown on drawing

(d) -Taking down unserviceable locking assy and S&F new onecomplete all as specified & as directed and as shown on drawing

(e) Taking down unserviceable handle and S&F with new handle chromium plated screw type of size 150mm with nut and washer including necessary welding to make good the surface. All as shown on drawing and as directed by Engineer-in-Charge.

Table Office Clk Steel(FD-84(M),1004 :- (a) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with widht equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over a coat of pink primer complete all as specified & as directed and as shown on drawing

(b)Taking down unserviceable legs and S&F new legs made out of 25mm x 25mm sq MS tube of 1.60mm thick duly welded and apply two coats of synthetic enamel paints (Olive green) over a coat of primer by spray painting including surface preparation. Rest all as per drg and as directed.

Table Office Officers Steel FD-84(M),1003 :- (a) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with widht equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over a coat of pink primer complete all as specified & as directed and as shown on drawing

(b)Taking down unserviceable legs and S&F new legs made out of 25mm x 25mm sq MS tube of 1.60mm thick duly welded and apply two coats of synthetic enamel paints (Olive green) and over a coat of primer by spray painting including surface preparation complete all as specified & as directed and as shown on drawing

(c) -Taking down unserviceable locking device and S&F new one complete all as specified & as directed and as shown on drawing

Table 900x 600 x760mm with Drawer Steel(FD-1008):- (a) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with widht equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over a coat of pink primer complete all as specified & as directed and as shown on drawing

(b) -Taking down unserviceable locking device and S&F new one complete all as specified & as directed and as shown on drawing

Table 900x 600 x760mm without Drawer Steel (FD-1007):- (a) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with widht equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over a coat of pink primer.complete all as specified & as directed and as shown on drawing

Teapoy Verandah(FD-255) (a) M&L to repair leg frame of teapoy verandah incuding denting, bending, welding and derusting and provide 19mm MS conduit pipe 1.6mm thick wherever required and applying two coats of polyurethane enamel paint high glossy over a coat of primer by spray painting and 4 nos pvc rubber shoes to be provided in the bottom of the legs.complete all as specified & as directed and as shown on drawing

(b) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with widht equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over a coat of pink primer. Rest all as per drawing and as directed by GE/Engineer-in-Charge.

Chair Executive high back(TP) :- (a ) Repair to revolving chair & removing old Unserviceable existing seat of chair and supply and fixing new seat made out of best quality foam cushion as per trade pattren, acomplete all as specified & as directed and as shown on drawing

(b ) Repair to revolving chair & removing old Unserviceable existing back of chair and supply and fixing new back made out of best quality foam cushion as per trade pattren, complete all as specified & as directed and as shown on drawing

(c) Replace the broken arm rest and S&Fnew arm rest as per trade pattern and as per existing size complete all as specified & as directed and as shown on drawing

(d) S&F 5 Nos castors wheels in each chair after removing of old unserviceable castors wheel complete all as specified and as directed

(e) S&F Hydraulic Jack with lifting handle in each chair after removing of old unserviceable hydraulic jack complete all as specified and as directed

Chair Writing MAP(FD-E6/MAP/13: (a)Taking down old unserviceable broken seats of chair writting map and replacement of the same with new seats as existing made out of cushion & 6mm ply wood commercial covered with best quality of tepastry cloth as approved by GE. Frame of chair writting map shall be welded with shaped conduit pipe 19mm dia 1.6 mm thick whereever required and iron cleat. Nuts and bolts for fixing seat and back including necessary welding complete all as shown in drawing.

(b)Taking down old unserviceable broken back of chair writting map and replacement of the same with new back as existing made out of cushion & 6mm ply wood commercial covered with best quality of tepastry cloth as approved by GE. Frame of chair writting map shall be welded with shaped condate pipe 19mm dia 1.6 mm thick whereever required and iron cleat. Nuts and bolts for fixing back including necessary welding complete all as shown in drawing.

(c) Taking down old existing Unserviceable/broken arms of chair writting map replacing the same,and fixed frame with nuts and bolts and all as directed by Engineer- in- charge.

Painting : M&L for preparing exposed steel surfaces of following items and applying one coat of synthetic enamel paint of Olive Green colour, white and black wherever required , rest all as specified and directed: (a) Almirah Large Steel(FD-1031)

(b) Almirah Med Steel(FD-1032)

(c) Locker Steel (FD-1029)

(d) Table Office Clerk Steel (FD-1004)

(e) Table Office Officer Steel (FD-1003)

(f) Table 3'x2' w/dr Steel (FD-1008)

(g) Table 3'x2' w/o dr Steel (FD-1007)

(h) Table dining OR alu top (FD-165(m))

(j) Teapoy verandah (FD-242)

M/S DHAR AND DHAR

M/S GOSWAMI BROTHERS