MAINT AND REPAIRS TO DRAIN AND DRAIN COVER, GRILLS AND GATE, SHEET, CLADDING, PATH, BOUNDARY WALL, FENCING AND MISC BR WKS AT PALAM AND NARAINA INCLUDING REPAIRS TO COMPOUND WALL AND GATE, DRAIN

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed.

Returning ,filling in including spreading levelling watering and well ramming in layer n exc 25cm all as specified and directed.

Removing excavated material n exc 50m & depositing at a level n exc 1.5m above starting point all as specified and directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc incl grit plaster complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry,as in manholes, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4, as in man holes all as specified and directed.

M&L for brick work sub class "B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 all as specified and directed.

M & L PCC 1:4:8 type D-2 as in sub base, foundation filling & mass concrete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channels benching, coping and drains, etc including slightly rounded or chamfered angles as reqd complete all as specified.

Material and labour Plain cement concrete (PCC) 1:3:6 type C-2 using 40mm graded mechanically crushed stone aggregate as in surface channels and drain with and including necessary work complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel upto 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:4) on brick/concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified and directed. NOTE : SBR latex shall be measured and paid separately.

Supply only Styrene Butadiene Rubber latex emulsion all as specified and directed.

M&L Preparation of new plastered or unplastered surface of walls and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Demolition and breaking up drain pipes of 150 mm (Salt glazed ware, AC / PVC or Reinforced concrete) set in cement mortar or any description especified and directed.

PVC (SWR) pipes of 150 mm bore single socketed, in any length with rubber ring joints, fixed to wall all as specified and directed.

M&L for providing heavy duty solid factory made precast cement concrete manhole cover slab incl reinfoercement and ms frame allround of cover, of any size and description as per requirement on site all as specified and directed.

S&F in repair factory made precast Road kerb stone of size 300mm X 450mm and thickness 150mm at bottom and 100mm at top,PCC 1:2:4 type B-0 (12.5 mm graded stone agg) vibro mechnically pressed and floated, heavy duty set jointed and pointed in cement mortar 1:3 complete all as specified and directed and removing rubbish outside MOD land. Make : NTC or Equivalent.

M&L PCC 1:2:4 type B-0 (12.50mm graded stone agg) as in sub base of floors, 25 mm thick complete all as specified and directed.

M&L providing 100 mm thick cement concrete Type C2 1:3:6 using (40 mm graded aggregate) as in sub base of floors all as specified and directed.

M&L for 25mm thick Fiber reinforced heavy duty cement concrete tile of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete inall respect and all as specified and directed. Make -Ultra/Unistone or equivalent.

M&L for PU coated machine pressed precast conctete paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment, as in floors/pavings laid over 40 mm thick sand cushioning layer and jointed with white cement slurry mixed with pigment to match the shade of tile complete in all respect and all as specified and directed. Make -Ultra/coral

Distmantling of Asbestos cement (Corrugated , semi corrugated ,etc sheets in roof coverings) all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

Dismantling of fencing wire mesh any type all as specified and directed.

S&F in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing, securing or tying at crossing all as specified and directed. NOTE : Each line wire to be measured.

All as per item No 29 above but restraining and resecuring including making good staples etc all as specified and directed.

S&F in repairs concertina coil fencing with punched tape concertina coil stretched to a length of 10 metres to achieve 600 mm dia (weighing not less than 8.50 Kg per 10 RM of length), having 50 Nos rounds per 5.4 metre length, spring core wire (2.5 mm thick) of high tensile strength of 165 kg/sqmm with tape (0.52mm thick) and weight 43.478 gm/metre and fixing the same with existing Y-shape angle iron to steel parts and another coil/MS Nibs alloys shown on drgs incl fixing with special galvanised fastners such as clips, U clips all as speicified and directed. Note :- Linear length of coil after stretching and fixing shall be measured for purpose of Payment.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Supply only chain link MS galvanised fencing, not less than 3 Kg / Sqm any size or type all as specified and directed.

S&F in repairs water tank cover any type suitable for water tank of capacity exc. 250 Ltr but n. exc 500 Ltrs fixed with brackets and screws complete all as directed

S&F in repairs water tank covers any type suitable for water tank of capacity exc 500 Ltrs and n. exc. 1000 Ltrs fixed with brackets and screws complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses all as specified and directed.

Supply and fixing framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 (Gde E-165) all as specified and directed.

M&L Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

Repairs of steel door shutter including smooth functioning of shutter by providing greasing oiling including cleaning on the rail, roller etc The Size of steel door shutter nexc 05 Sqm complete all as specified and directed.

S&F in repairs Steel rolling shutters of thickness of laths 1.25mm, with ball bearing, safety lock of four levers incl connected items as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 marble powder : 2 marble chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the marble chippings and forming groove of uniform size 15 mm wide and 15 mm deep in top layer of grit plaster using wooden battens all round as per approved pattern. The groove shall be finished with two coats of bitumenous paint complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar all as specified and directed.

Supply and fixing mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

-ditto as per item No 43 above, but 6mm to 8mm dia all as specified and directed.

ditto as per item No 43 above, but 5mm dia and over upto including 10mm dia as in stirrups all as specified and directed.

M&L RCC 1:2:4 type B1 (20mm graded cushed stone aggregates) for foundations,footings, plinth beams and column bases (columns upto plinth beam) etc all as specified and directed.

M&L RCC 1:2:4 type B1 (20mm graded crushed stone aggregates) for cloumns, pillars etc all as specified and directed.

M&L RCC 1:2:4 type B1 (20mm graded crushed stone aggregates) for Beams, bands, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M&L for Y shape angle posts ,struts and similar works as in fencing including cutting tops to slope as directed , drilling holes , notching for wire etc, including all necessary drilling bolting or revited and similarly work confirming to Fe-290 all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290 (Gde E-165) all as specified and directed.

All as per item No 50 above but errection and fixing only after modification complete all as specified and directed.

M&L framed work and hung as gates incl pintel hinge stops and hand made slidng bolt with shouldered and or welded framed work and similar work confirming to Fe-209 Gde A 165 all as specified and directed.

M&L for prepartion of new steel surfaces of any description over 10cm width or girth and applying two coats of black bitumenous paint complete all as specified and directed.

Use and waste of formwork for flat rough finished surface of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed.

Use and waste of formwork for flat rough finished surface of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc all as specified and directed.

Use and waste of formwork for rough finished surface of concrete square rectagular to sides of pillars, posts, struts, piers, columns and stanchions all as specified and directed.

M&L Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) bedding layer 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

M & L 50 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in panels surfaces finished even & fair without using extra cement incl all as specified and directed.

M/S Satyam Associates

Ex Serviceman Enterprises

SANJEEV ENTERPRISES