REPAIR TO JOINERY, PLUMBING, TILING, FALSE CEILING, PLASTERING, FLOORING AND SUNKAN FLOOR TREATMENT FOR MD ACCN A ZONE, B ZONE AND FOD UNDER AGE B/R-I OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Taking down chowkats or frames n exc 1.5 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed

Taking down chowkats or frames exc 1.5 and n exc 4.0 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed

Taking down old unserviceable shutters of any description exc 1 but n.exe 2.00 Sqm each and removing materials from the site of work complete all as directed

S&F 1.25mm thick pressed steel frame door 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 1.25mm thick pressed steel frame door 165 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides knil seasoned and chemically pressure treated with antitermited complete all as specified and directed.

S&F 2nd class HW factory made 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or 12mm thick veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats as specified in SSR Part-I, section 8, clause 8.24(b) complete all as specified and directed.

S&F 2nd class HW glazed and skeleton 30mm thick door shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24(b) complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and directed.

S&F in repairs steel windows with side hung double shutter (one for glazing and other for mosquite proofing) including projection type hinghs with steel handle, and steel pag stay, complete with glazing bars, dovetailed or welder all as specified.

Blank

Blank

S&F steel ventilator with top hung shutter including hinges steel peg stay complete.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of apertune 1.40 mm and fixed with tinned tacks or galvanised wire staples including necessary beading complete all as specified and directed.

Hacking out old broken glass (any thickness size quality and discription) for metal frame including punching, drilling out old glazing pins / spring clips and providing new ones complete all as specified and directed.

S&F figure glass pin headed type 4 mm thick and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

Material and labour for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails sectional area exceeding 13 sqcm but not exceeding 25 sqcm all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, with particle board core as per specification & drawing complete all as specified and directed.

S&F 100 mm Butt hinges, medium weight, stainless steel, and fixed complete all as specified and directed.

S&F 200 mm size mild steel barrel tower bolts of stove enamelled and fixed all as specified and directed

S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F Anodised aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specifed.

S&F for anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F for anodised aluminium window and ventilator shutters, side hung type without sash, aluminium sections weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, anodised aluminum snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.) hinges type B-21 100 mm long (2 no) suitable handle (1 no) etc complete all as specified and directed.

S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminum snap beading, screws etc complete all as specified and directed.

Taking down unserviceable Aluminium door/window shutters including taking out all unservicable parts, and repairing defective portion of shutter, and refixing in the same opening complete all as specified and dirtected.

M&L 100mm x 100mm size mesh aluminium anodised grills of approved designs complete all as specified and directed.

Dismantling wall/ceiling boards (fibre, pulp, insulation, etc) or insulation oards/slabs/ blankets, any thickness including cover fillets etc complete all as specified and directed.

S&F suspended false ceiling using anodised GI Exposed ceiling suspension system perimeters channel 0.55mm thick having web of 27mm and flange of 30mm on one end 20mm on other and fixed to wall with the help of nylon sleeves and providing fixing Gypsum board 12mm thick in ciling fixed with screw and GI frame and finished surface and finishing surface attachment and finnaly board have tobe jointed and finished look with POP to have a flush look using jointed compound/tape painting etc all as specified as directed.

Dismantling of plain or corrugated PPGI/steel sheets any gauge, thickness in roof coverings/ ridge all as directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings all as directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as roof ridge fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

S&F for 6mm thick Asbestos cement, corrugated or semi corrugated sheets in roofs, walls, etc. fixed with L-type or J-type hook bolts in roof coverings complete all as specified and directed.

M&L for 6mm thick Asbestos cement two piece adjustable serrated ridge for corrugated or semi-corrugated sheets fixed with GI 'J' type or 'L' type or cranked hook bolt with GI nuts and GI & bitumen washers complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 W (Gde-E-250 quality - A) complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M&L for non skid ceramic tiles joint free coloured tiles 7mm to 8mm thick, area exceeding 0.11sqm but n.exc 0.18 sqm on floors over and including 15mm thick screed bed in cement mortar (1:6) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles joint free coloured 300 X 450 mm size 7mm thick on walls over and incl 10mm thick plastering in cement mortar (1:4) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

M&L for light shade glazed ceramic tiles 7mm thick (square / rectangular), area of each tile n.exc 0.36 sqm on floors over and including 20mm thick screed bed in cement mortar (1:6) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

All as per item No.47.00 above here-in-before but in vertical surfaces such as dado/skirting over and incl 10mm thick plastering in cement mortar (1:4) complete all as specified and directed.

M&L for vitrified ceramic tiles (light shade) 10mm thick, area exceeding 0.36sqm, in floors over and including 15mm thick screed bed in cement mortar (1:6) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

All as per item No.49.00 above here-in-before but in vertical surfaces such as dado/skirting over and incl 10mm thick plastering in cement mortar (1:4) complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate, 40mm thick in flooring complete all as directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3.0 m c/c filled with mastic mortar complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in cooking platform laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over 20 mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including including rubbing and mirror polishing complete all as specified and directed.

Ditto as above item no 58.00 here- in -before but in skirting on backing coat of cement mortor 1:4.

S&F 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, Cooking Platfarms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down cement plaster of any description in any position incl racking out joints hacking for key, scrubbing down with water etc and removal of debris from site all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work wall, finished the surface even and smooth with out using extra cement complete all as specified and directed.

M&L Rendering 15mm thick on other than fair faces in CM 1:6 finished the surface even and and smooth with out using extra cement complte all as specified.

M&L rendering 5 mm thick in cm 1:3 over/soffit of chajja finished surface even and smooth with out using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer including preparing surface of cement base even and smooth complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper preparing surface of wall even and smooth over and smoothappying with 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat white wash complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement based paint (any tint) on walls complete all as specified and directed.

M&L for one coat of oil bound distemper on old surfaces of wall including preparation of old undecorated surfaces complete all as specified and directed.

M&L for preparation of old pained wooden surfaes of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint any tint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint any tint complete all as specified and directed.

M&L for preparing plastered or unplastered old surface of walls including brooming down or scrapping down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spots and applying one coat of white (Lime) wash on wall complete all as specified and directed.

Ditto all as per item No. 72.00 here-in-before but applying one coat of white (Lime) wash on ceiling.

Rewriting repainting existing writing letters or figures (block roma, roman, italic, Indian n exc 30 cm height) complete all as specified and directed.

Uprooting of vefetation growth from walls, roof chajja gutter cleaning the surface and making good holes with cement mortar (1:3) each hole not exceeding 0.10 Sqm complete all as specified and directed.

Dismantling PVC water tanks 1000 litres capacity.

Dismantling PVC water tanks 500 litres capacity.

S&F rotational moulded polyethene water storage tank 1000 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc including complete all as specified and as directed.

S&F rotational moulded polyethene water storage tank 500 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc including complete all as specified and as directed.

S&F in repair 20mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as specified.

S&F ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore.

Taking down steel tubing and connection 15mm bore.

Taking down steel tubing and connection 20mm bore.

Taking down steel tubing and connection 25mm bore.

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 20mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 25mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth all as specified and directed.

S&F in repair 100 cast iron sanitary connections- short connections pipe of length upto 300 mm complete all as specified and directed.

S&F in repairs Bib tap 15 mm CP with crutch or butterfly handle screwed down srewed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm dia stop valve cast copper alloy with fancy type chromium plated fixed to iron pipe complete all as specified and directed.

S&F Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight) 190gms) complete all as specified and directed.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed.

S&F in repairs 10 lits capacity PVC flushing cistern low level, white, with inlet, ball valve, float and handle flush pipe including brackets etc complete all as specified and as directed.

S&F viterious china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP waste coupling 32 mm dia, PVC waste pipe 32 mm dia and other fittings complete all as specified and directed.

S&F pillar taps, 15mm bore fancy type, cast copper alloy with capston heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F 15mm dia PVC connector with PTMT nuts of length 450mm complete all as specified.

S&F in repairs water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed.

S&F in repair wash down water closet vitreous china pan pedestal pattern white including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair angle cock cast copper alloy fancy type , chromium plated screwed down, high pressure,with crutch or butterfly handle, screwed both ends for iron pipe 15 mm bore complete all as specified.

S&F in repairs Kitchen Sink with drain board made of stainless steel 1mm thick with plugs washers and waste pipe incl bedding in CM to dwarf wall incl fitting cantilever brackets and connecting union to pipe over all size 915mm x 460 mm and bowl size 410 mm x 330mm x160mm complete all as specified and directed.

Demolition reinforced cement concrete (reinforcement cut as required to faciliate demolition) of any description and in any position not otherwise specifically provided for all as specified and directed.

M&l for reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregates as in coverslab, landings, chajja etc complete all as specified and directed. (Reinforcement shall be measured and paid seperately).

Material & Labour for TMT deformed bars 8mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as directed and specified.

S & F for 8 to 12 mm thick Looking mirror finished surface fixed to wall with stainless steel screw complete all as specified.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar for 150mm all as directed.

M&L for Plain cement concrete 1:4:8 type D-2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

S&F Reinforced concrete NP2 drain pipe 150mm internal dia laid in trenches on concrete bed and jointed, complete all as specified. (Note :- Excavation, earth work and concrete bed and haunching shall be measured and paid for separately)

Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall all as specified.

Supply and fix in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fix to wall all as specified.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified.

S&F in repairs PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified.

S&F in repairs PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 75mm bore complete all as specified.

S&F in repairs PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 110mm bore complete all as specified.

S&F in repairs PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), in repairs and including waterleak proor treatment complete all as specified.

S&F in repairs PVC connection pipe 600 mm long with two Nos CP nut threaded coupling for 15 mm dia pipe complete all as directed and specified.

M&L for PCC 75mm thick 1:4:8 type D-2 using 40mm graded stone aggregates as in floor, path etc finishing the surface rough to receive tilies complete all as directed and specified.

Blank

Blank

M&L for pre-polished coloured cement concrete chequred tile of approved quality size 300X300X 25mm thick on floors over and including 15 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

M&L for providing Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid on 25mm thick layer of sand well watered & rammed and jointed and pointed with grey cement and pigment complete all as specified and directed.

Demolition of Cement Concrete (unreinforced)of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in sunkan floor.

M&L for providing PCC 1:3:6 Type C2 (using 40mm graded stone aggregate) for supporting chequered tile & interlocking tile all as specified and as directed

M&L for Rendering 10 mm thick cement plaster in 1:3 CM mixed with WPC @3% by weight of cement in sunkan portion all as directed.

M&L for polythene film, 150micron thick, laid on acoat of bitumen primer@ 0.3 to 0.5 kg per sq.m all as specified.

S&F mortice lock vertical type barss 100mm size 4 levers complete all as specified and directed.

S&F double action floor spring hydrualically regulated made up of minimum 12.5 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L for 5.5 mm thick sheet glass ordinary quality frosted or one way including glazing clips, rubber packing etc exc. 0.5 sqm in each pane complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 168925.00 (refer Tender Srl Page No 34). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

M/S JANATA CONSTRUCTION

M/S DUTTA CONSTRUCTION CO

AMULYA KUMAR ROY