REPAIRS TO SEWAGE LINE MANHOLES SWR PIPES NAHANI TRAP AND CLEANING OF SEWAGE LINE IN ZONE A AREA AT NDA KHADAKWASLA

Amount

Attending to blockage of WHB, WC, sinks, urinals, floor, Nahani traps, gully trap, vertical CI pipe/PVC pipes of any dia (upto double story bldg),Taking out (desludge) silt brick bats, debris,liquid waste sludge in solid semi-solid state from manhloles incl pumping the flow in the drain if necessary plugging, diverting the flow in the drain if necessary and stacking the removed slit away from the edges of manholes as directed incl use of safety belts dry cell tourch for lighting inside the manholes and taking precautionary measure and removing the sludge to a distance exceeding 50m and not exceeding 250m and leaving the manhloles cleaned and flushed with water etc incl taking out and refixing the manholes covers etc in any depth and Removing of blockage in sewage lines in any length and systematically cleaning the same using necessary tools, mechanically and /or manually such as passing rope knots, bamboo kasui and disc of required size by safaiwala every day including Sunday & holiday i.e from 0900 hrs to 1700 hrs all as specified and directed .

All as per item No 1 here in before but with helper to assist safaiwala

Taking out (desilting) silt brick bats, debris,liquid waste sludge in solid semi-solid state from septic tanks using mechanical means and stacking the removed slit away from the edges of tank as directed and removing the sludge to a distance exceeding 1.0 Km and leaving the septic tanks cleaned and flushed with water etc incl taking out and refixing the septic tank covers etc.

Excavation in trenches n. exe 1.5m wide & n. exe 1.5m depth for foundation etc and getting out in soft/dense soil.

Demolition of cement concrete in ground floors and paving n. exe 15cm thick below or above GL all as directed & cleaning premises.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar incl arches, pillers etc..

Demolition and breacking up 150 mm bore drain pipes (SWG,AC or RCC pipes) set in CM

Demolition and breacking up 200 mm bore drain pipes (SWG,AC or RCC pipes) set in CM

Demolition and breacking up 300 mm bore drain pipes (SWG,AC or RCC pipes) set in CM

M&L for providing plain cement concrete 1:4:8 type D2 using 40mm grade agg. As in foundation filling and mass concrete

M&L for precast cement concrete block walling exc. 10 cm width with solid block C-1 grade design mix and setting in cement mortar (1:6) all as specified and as directed

M&L for rendering 15mm thick on other than fair faces & brick or concrete surfaces in CM (1:4) finishing even and fair without using exta cement

M&L for preparation of newly plastered/concrete wall surface and applying two coats of cement base paint with alkali resistance priming briming paint

Cutting into existing manholes for connecting new drains internal dia of pipe 150mm making good to pipe & to or finished and reforming benching as required. 3/4 section in cement concrete (1:2:4) type B-1, smoothcutting out existing benching for forming branch channel (1/2) rendering

Cutting into existing manholes for connecting new drains internal dia of pipe 200mm making good to pipe & to or finished and reforming benching as required. 3/4 section in cement concrete (1:2:4) type B-1, smoothcutting out existing benching for forming branch channel (1/2) rendering

Extra for forming fair finished drain or channel girth not exc 30cm in cement concrete using extra cement including form mounds etc all as specified.

M&L for provided reinforced cement concrete pipe 150mm bore class NP-2 with collars laid and jointed with cement all as directed and specifed

M&L for provided reinforced cement concrete pipe 200mm bore class NP-2 with collars laid and jointed with cement all as directed and specifed

M&L for provided reinforced cement concrete pipe 300mm bore class NP-2 with collars laid and jointed with cement all as directed and specifed

M & L for providing bed to drain pipes 150 mm dia in cement concrete (1:3:6) type C2 using 40 mm stone aggregate including packing under and haunching against the sides of pipe after they are laid & tested

Ditto all as per item No 20 above but for 200 mm dia pipes

Ditto all as per item No 20 above but for 300 mm dia pipes

Returning filling in soil including spreading levelling, watering & well ramming in layers n. exe 25cm (Soft /disintregated rock)

Removing excavated material not exc 50mtr and depositing where directed at a level not exc 1.50mtr above the starting points in any type soil

Dismantling of cast iron/RCC pipes jointed in cement mortor and taking out of trenches if required for 100mm pipe (Excavation & earth work will be measured and paid separately)

Dismantling of cast iron/RCC pipes jointed in cement mortor and taking out of trenches if required for 75mm pipe (Excavation & earth work will be measured and paid separately)

M&L for providing cast iron, soil & waste and vent pipes in any length, with or without ears with cement joints fixed to walls using pipes 75 mm bore.

M&L for providing cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls using pipes 100 mm bore.

M&L for providing cast iron soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor using pipes 100 mm bore.

S&F of CI bends (any radius) diminishing pieces or taper,100mm bore in repairs.

S&F of CI bends (any radius) diminishing pieces or taper fitted with oval access doors 100 mm bore in repairs.

S&F of CI bends (any radius) diminishing pieces or taper,75 mm bore in repairs.

S&F of CI bends (any radius) diminishing pieces or taper fitted with oval access doors 75 mm dia, in repairs

S&F of CI branch pieces single (equal or unequal) ordinary or inverted (Spigot or socket type) or with parallel branches 100 mm bore.

S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall or floor etc using synthetic rubber adhesive cement solvent complete all as specified and directed

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall or floor etc using synthetic rubber adhesive cement solvent complete all as specified and directed

S&F for 75mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F for 75mm dia PVC (SWR) junction single(single T) complete all as specified and directed

S&F for 75mm dia PVC (SWR) branch piece single(single Y) equal or unequal complete all as specified and directed

S&F for 75mm dia PVC (SWR) vent cowl complete all as specified and directed

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F for 110mm dia PVC (SWR) junction single(single T) complete all as specified and directed

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed

S & F precast RCC medium duty manhole covers of size 45cm x 90cm x 50 mm thick incl handle , 50 x 50 mm sqaure welded at corner and reinforced with 6 mm dia TMT bar at 150 mm centre to centre on both ways and including cover frame, complete all as specified and directed

S & F precast RCC medium duty manhole covers of size 60cm x 90cm x 50 mm thick incl handle , 50 x 50 mm sqaure welded at corner and reinforced with 6 mm dia TMT bar at 150 mm centre to centre on both ways and including cover frame, complete all as specified and directed

S & F precast RCC medium duty manhole covers of size 60cm x 60cm x 50 mm thick incl handle , 50 x 50 mm sqaure welded at corner and reinforced with 6 mm dia TMT bar at 150 mm centre to centre on both ways and including cover frame, complete all as specified and directed

S & F precast RCC medium duty manhole covers of size 90cm x 90cm x 50 mm thick incl handle , 50 x 50 mm sqaure welded at corner and reinforced with 6 mm dia TMT bar at 150 mm centre to centre on both ways and including cover frame, complete all as specified and directed

S & F precast RCC medium duty manhole covers of size 30cm x 30cm x 50 mm thick incl handle , 50 x 50 mm sqaure welded at corner and reinforced with 6 mm dia TMT bar at 150 mm centre to centre on both ways and including cover frame, complete all as specified and directed

S & F precast RCC medium duty manhole covers of size 45cm x 60cm x 50 mm thick incl handle , 50 x 50 mm sqaure welded at corner and reinforced with 6 mm dia TMT bar at 150 mm centre to centre on both ways and including cover frame, complete all as specified and directed

Dismantling stone slab of any description or thickness in floors, approns etc

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for

M&L for PCC (1:4:8) type D-2 (using 40mm graded aggregates) as in sub base 50mm thick

S&F for glossy finished chequered cement concrete tiles 30cmx30cmx30mm/20 x 20 x25 mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors

M&L for 60 mm thick glossy finished cement concrete coloured interlocking pavers, pattern as approved, as in floors or pavements, laid on 30 mm thick stone dust cusioning, laid dry to the profile as directed incl filetting to the edges in CM (1:4), all manufacturer's instruction complete all as directed

M&L for 30mm to 25mm thick rough dressed sahabad stone slab flooring bedded and jointed in cement mortar (1:6) and pointed in CM (1:3)

-ditto- all as per Item Ser No 55 here-in-before but except sahabad stone

M&L for PCC(1:2:4) type B-1 (20 mm graded aggregate) 75.00 mm thick as in floor with even and smooth finishing without using extra cement complete.

Cutting holes into or through brick/stone walls in any width with core cutter machine or manially built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required ( exc 400 Sqcm but not exc .10 Sqm)

S&F vitreous china wash down Cascade water closet pan (Paddestal pattern) coloured incl 10 Ltr vitreous china valveless syphonic action type flushing cistern low level colour match (EWC with inlet ball valve float and handle incl bracket seat cover and 32 mm dia flushing pipe (Cera and Equivalent) incl taking down old u/s EWC complete.

S & F cast iron work Gd FG-150 unmachined as in brackets,gratings,gully traps, manhole covers etc in articles exc exceeding 5 Kg each.

-do- but n exc 5 Kg

Road cutting and repair to disturbed road with PCC (1:2:4) type B2 100 m thick over 150 mm hard core of broken stone of gauge n exc 63 mm over rammed earth etc complete all incl cutting of road portion as directed

M & L for precast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs set in cement mortar (1:4) complete all as dspecified and as directed (Note : Reinforcement to be measured and paid separately).

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S & F in repair Vitreous China urinals,half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe (excluding flushing cistern, flush pipe and waste pipe) Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) including all fitting.

S&F for fixing in repairs Vitreous china wash down water closet (Pedestal pattern) , white in colour including fixing bolts, connection to drain and to flushing pipe with low level PVC valve less symphonic action type flushing cistern of 10ltrs capacity white in colour with inlet, ball valve float and PVC flush pipe 32mm dia with white seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or hinging device complete all as spd and directed .

S&F for fixing in repairs vitreous china ware wash basin white, flate back size 550 X 400mm including 32 mm CP waste coupling, chain and plug, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections of 450mm length complete all as spd and directed .

S&F fixing in repairs for vitreous china squatting Pan Orrisa pattern of size 580 x 440mm white with integral foot rests and provn of lime concrete with high level PVC valve less symphonic action type flushing cistern of 10ltrs capacity white in colour with inlet, ball valve float and PVC flush pipe 32mm dia pipe etc complete all as spd and directed .