08/EWC(B)/2022-23

Amount

Carriage of following line materials for 33 KV line from any Store Centre of Bareilly zone, Bareilly to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.

STP 11Mtr. long

Cross Arm Channel 100x50mm V type

33 KV Pin insulator

33 KV Pin with nut

Disc insulator B&S type 7000 kg.

Disc fitting Dog/raccon 7000kg.

ACSR dog conductor

33 KV 3x300mm XLPE Cable

33KV 3x300mm cable jointing kit O/D

G.I. Wire 8 SWG

PCC pole 9mtr. Long

M.S. Earthing rod of 20x2500mm & 6swg. Earthing wire

Top Channel 125x65x6mm

M.S. Angle 65x65x6mm

Stay set complete

Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All types of clamps nuts & bolts, washer would be provided by contractor.

Single support of ST Pole 11mtr long.

Single support of PCC Pole 9mtr long.

Double pole structure on ST Pole 11mtr long complete with bracing.

Tri pole structure on ST Pole 11mtr long complete with bracing.

Four pole structure on ST Pole 11mtr long complete with bracing.

Erection/fixing for stay set with stay wire and clamp as per RESSPO drawing including binding, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and brick ballast and sand before back filling of the pits as per RESSPO schedule all clamps, nuts & bolts, cement, brick, concrete etc would be provided by contractor.

Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.

Laying and sagging of 3 phase ACSR Dog conductor from Double pole upto the gentry at 132KV substation / 33KV substation including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc. in all respect.

Earthing of each S.T Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Earthing of each PCC Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support & its accessories by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Fabrication and fixing of guarding angle on Single/double poles, Stringing and sagging of three nos. Earth/GI wire with cardle guarding of above 33 KV line as per RESSPO Norms including provision of all necessary clamps and hooks. Shifting of existing line conductor of 11 KV/LT line to maintain proper clearance in between both lines (all required material will be provided by the contractor except guarding angle and earth/GI wire).

Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete the job.

Single Pole of S.T Pole .

Double Pole of S.T Pole .

Tri Pole of S.T Pole .

Four pole of S.T. Pole

Fixing of danger board on each location and G.I barbed wire including proper clamping and providing anti climbing device by using including supply of the above items.

Laying of double circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable)

Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI pipe of size 6" dia 3 M long including its jumpering complete with clamps, nuts and bolts.

Fixing of 33 KV O/D or I/D

Fixing of cable route marker.

Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of Incharge.

Bharat Trading Corporation

M/S SUPER ENGINEERING TRADERS