NIT NO. 206/Durg(Mohla-Manpur_A.Chowki)/2026

PUBLIC WORKS DEPARTMENT

AR ESTIMATE FOR REPAIR AND MAINTANANCE OF VARIOUS BUILDING (R/NR)UNDER SUB DIVISION A. CHOWKI. DISTT : MOHLA MANPUR A.CHOWKI (C.G.)

Estimated Cost Rs. 20.00 Lacs

P.W.D. DIVISION MOHLA-MANPUR-A.CHOWKI

PUBLIC WORKS DEPARTMENT

GENERAL ABSTRACT

Estimated Cost Rs. 20.00 Lacs

Estimate No. ............................. Annual Repair/Ordinary Repair Work of Residential/Non Residential Building Under Sub Division A.Chowki, Distt- Mohla- Manpur-A.Chowki

S.No. Sub Head Amount

1 Annual Repair/Ordinary Repair Work of Residential/Non Residential Building Under Sub Division A.Chowki, Distt- Mohla- Manpur-A.Chowki 1999636.00

TOTAL 1999636.00

REPORT AND SPEICIFICATION

Name of work : Annual Repair/Ordinary Repair Work of Residential/Non Residential Building Under Sub Division A.Chowki, Distt- Mohla- Manpur-A.Chowki

Amount : 20.00 Lacs

Authority : Public Works Deportment Govt. of C.G. Raipur

Necessity : milaHkkx va-pkSdh ds varxZr vkoklh; ,oa xSj vkoklh; Hkouksa ds ejEer dk;Z dk izkDdyu rS;kj fd;k x;k gSA

Provisions : The following provisions has been made in this estimate :-

1 Brick work with modular fly-ash lime bricks

2 15mm thick cement plaster

3 sliding shutter with M.S. sheet 1mm thick

4 ceramic glazed wall tiles

5 15 mm thick Table rubbed polished Granite stone

6 aluminium work for doors, windows, ventilators and partitions

Rate and Specification : Schedule of Rate of Building works in Public Works Department (B&R) wef 15.04.2026 issued by the Engineer-In-Chef P.W.D. Raipur has been adopted for Framing the estimate. The work will be exicuted as per MOST Specifications.

AR ESTIMATE FOR REPAIR AND MAINTANANCE OF VARIOUS BUILDING (R/NR)UNDER SUB DIVISION A. CHOWKI. DISTT : MOHLA MANPUR A.CHOWKI (C.G.)

Block- A.Chowki :- 1. Tahsil Office A.Chowki 2. Collage Building A.Chowki & FTC Building Meregaon, 3. Cort Building, A.Chowki 4. I.T.I. Building & ITI Hostel A.Chowki 5. G.A.D. & All Govt. R/Building Qtr, 6. B.E.O. Office,A.Chowki 7. Rest- House, A.Chowki 8. HSS Sonsaytola & Chachanpahri Building

S.O.R. for Buildind work for C.G.PWD Raipur in force form 01-01-2015 up to date ammandment will be applicable. P.A.C. 20.00 Lacs

S.N Department SOR Year Item Code PARTICULARS Qty Unit Rate Amount

1 PWD Building 2015 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.In all types of soil 122.500 cum 185.00 22663.00

2 PWD Building 2015 1.6.1 Extra for every additional lift of 1.5 m or part thereof. All types of soils 34.000 cum 26.50 901.00

3 PWD Building 2015 3.1.3 Providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 12.000 cum 2970.00 35640.00

4 PWD Building 2015 3.12.2 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawingsincluding cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 500D 1480.000 Kg 54.50 80660.00

5 PWD Building 2015 2.1.1 Providing and fixing formwork including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, base of columns and plinth beam in any shape and size. 112.000 sqm 139.00 15568.00

6 PWD Building 2015 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 36.000 sqm 297.00 10692.00

7 PWD Building 2015 2.1.8 Beams, lintels, cantilevers & walls 17.000 sqm 202.00 3434.00

8 PWD Building 2015 2.1.13 Weather shade, chhajja, Cornices and mouldings 20.000 sqm 294.00 5880.00

9 PWD Building 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 80.000 sqm 235.00 18800.00

10 PWD Building 2015 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 35.000 cum 3263.00 114205.00

11 PWD Building 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 121.00 30.000 cum 121.00 3630.00

12 PWD Building 2015 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 100.550 cum 65.00 6536.00

13 PWD Building 2015 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 12.000 each 100.00 1200.00

14 PWD Building 2015 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 12.000 each 66.50 798.00

15 PWD Building 2015 16.3.3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 17.000 Cum 263.00 4471.00

16 PWD Building 2015 16.42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead. 14.000 Cum 768.00 10752.00

17 PWD Building 2015 16.53.1 Removing following vitreous china sanitorywares carefully for re-use including stacking within 50 metres lead. Wash basin of all sizes and shapes 8.000 nos 30.50 244.00

18 PWD Building 2015 16.53.2 Urinals of all sizes and shapes 8.000 nos 38.00 304.00

19 PWD Building 2015 16.53.3 European/ Anglo Indian WC pan of all sizes 8.000 nos 46.00 368.00

20 PWD Building 2015 16.53.4 Cysten of all sizes and shapes 8.000 nos 34.50 276.00

21 PWD Building 2015 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 210.000 Sqm 11.00 2310.00

22 PWD Building 2015 16.8 Dismantling flag stone flooring laid in cement/lime mortar including stacking of serviceable material and disposal of unserviceable material within 50 metre lead. 35.000 sqm 57.00 1995.00

23 PWD Building 2015 16.43.2 Demolishing cement concrete including disposal of material within 50 metre lead. 1:3:6 or richer mix 5.000 cum 549.00 2745.00

24 PWD Building 2015 16.30 Dismantling steel work in single section in RS Joists, channels, angles, flats, I-section and T-section including dismembering and stacking within 50 Metres lead. 283.500 kg 0.70 198.00

25 PWD Building 2015 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level nominal size). 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 15.500 cum 4163.00 64527.00

26 PWD Building 2015 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 275.000 metre 87.00 23925.00

27 PWD Building 2015 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 850.000 sqm 91.50 77775.00

28 PWD Building 2015 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 455.000 sqm 107.00 48685.00

29 PWD Building 2015 11.5 Neat Cement punning. 74.000 sqm 33.00 2442.00

30 PWD Building 2015 9.12 Providing and fixing sliding shutter with M.S. sheet 1mm thick, frame and diagonal braces of 40x40x6mm angle iron, 3.0 mm thick M.S. gusset plates at junctions and corners, 25mm dia pulley, 40x40x6mm angle and T-iron guide at top and bottom respectively including applying a priming coat of red oxide zinc chromate primer. 215.000 kg 71.50 15373.00

31 PWD Building 2015 12.13.1 Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm 225.000 sqm 1082.00 243450.00

32 PWD Building 2015 12.9.2 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size above 300x300mm 61.000 sqm 728.00 44408.00

33 PWD Building 2015 12.7.2 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size above 200x300mm 90.000 sqm 646.00 58140.00

34 PWD Building 2015 12.45.2 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Granite stone black 6.500 sqm 2646.00 17199.00

35 PWD Building 2015 12.58 25mm thick un-polished Local RAJIM/ Red Flag stone slab flooring laid over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigments to match the shade of the stone. 5.000 sqm 428.00 2140.00

36 PWD Building 2015 9.47.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion 98.900 kg 331.00 32736.00

37 PWD Building 2015 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 154.000 kg 338.00 52052.00

38 PWD Building 2015 9.50.2 Providing and fixing 12mm thick pre-laminated particle board flat pressed with decorative lamination and balancing lamination on specified sides exterior Grade – I MDF Board 12 mm thick confirming to IS:14587, including fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete. With decorative lamination on both side 15.000 sqm 845.00 12675.00

39 PWD Building 2015 9.51.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness 14.500 sqm 708.00 10266.00

40 PWD Building 2015 9.44 Providing and fixing “NETLON insect screens” with 25mm wide Hook and loop tape all around to wooden/ aluminium/ steel windows, ventilators and the like complete. 12.500 sqm 278.00 3475.00

41 PWD Building 2015 8.15 Extra for double leaf shutter instead of single leaf. 8.250 sqm 52.00 429.00

42 PWD Building 2015 9.49 Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized. 252.900 kg 34.50 8725.00

43 PWD Building 2015 8.12.1 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 40 mm. thick (single leaf) 18.000 sqm 2467.00 44406.00

44 PWD Building 2015 8.58.1 Providing and fixing bright finished brass butt hinges with brass polished MS screws complete: 125x85x5.50 mm (Heavy Type) 5.000 each 245.00 1225.00

45 PWD Building 2015 8.60.1 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete: 300x16mm 5.000 each 475.00 2375.00

46 PWD Building 2015 8.62.1 Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete: 250x10mm 5.000 each 276.00 1380.00

47 PWD Building 2015 8.65.1 Providing and fixing bright finished brass door handles with brass polished MS screws complete: 125 mm 5.000 each 55.50 278.00

48 PWD Building 2015 19.4.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL 15 mm nominal outer dia .Pipes. 60.000 metre 110.00 6600.00

49 PWD Building 2015 19.4.5 40 mm nominal outer dia .Pipes. 50.000 metre 362.00 18100.00

50 PWD Building 2015 19.4.3 25 mm nominal outer dia .Pipes. 75.000 metre 199.00 14925.00

51 PWD Building 2015 19.5.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., 15 mm nominal outer dia .Pipes. 60.000 metre 133.00 7980.00

52 PWD Building 2015 19.5.2 20 mm nominal outer dia .Pipes. 55.000 metre 167.00 9185.00

53 PWD Building 2015 19.5.3 25 mm nominal outer dia .Pipes. 80.000 metre 213.00 17040.00

54 PWD Building 2015 18.5.1 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with ISI marked white plastic seat and lid, 10 litre PVC low level flushing cistern with fitting and brackets, 40mm flush bend, mosquito proof coupling complete, including painting of brackets, cutting and making good the walls and floors wherever required : White 1.000 each 4589.00 4589.00

55 PWD Building 2015 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 5.000 each 1430.00 7150.00

56 PWD Building 2015 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. 55.000 metre 182.00 10010.00

57 PWD Building 2015 18.76.2 110 mm dia pipe. 65.000 metre 267.00 17355.00

58 PWD Building 2015 18.77.1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm 5.00 each 113.00 565.00

59 PWD Building 2015 18.77.2.2 110 mm bend 5.00 each 154.00 770.00

60 PWD Building 2015 18.77.2.2 Double \"Y\" with or without door 110 mm 5.000 each 224.00 1120.00

61 PWD Building 2015 18.77.3.1 Vent covel 75 mm 5.00 each 34.00 170.00

63 PWD Building 2015 18.77.5 \"P\" trap 110mmx110mm long 10.00 each 227.00 2270.00

64 PWD Building 2015 18.77.6 Nahani trap 110x75mm 10.00 each 90.50 905.00

65 PWD Building 2015 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 15.000 each 382.00 5730.00

66 PWD Building 2015 19.14.2 Long nose bib cock (500 grams) 15.000 each 455.00 6825.00

67 PWD Building 2015 19.14.5 Two way bib cock (800 grams) 15.000 each 708.00 10620.00

68 PWD Building 2015 19.14.6 Stop cock (concealed) (600 grams) 15.000 each 494.00 7410.00

69 PWD Building 2015 19.14.11 Hand shower set with flexible extension pipe 5.000 each 754.00 3770.00

70 PWD Building 2015 19.14.4 Piller Cock (400 grams) 15.000 each 398.00 5970.00

71 PWD Building 2015 19.14.7 Angle valve for basin mixer and geyser points (450 grams) 15.000 each 382.00 5730.00

72 PWD Building 2015 19.14.10 Wall mixer with elegant knob (1400 grams) 5.000 each 1787.00 8935.00

73 PWD Building 2015 19.14.15 Shower rose (revolving type) (150mm) 4.000 each 269.00 1076.00

74 PWD Building 2015 19.14.16 Towel rail (600mm long x 20mm dia) 4.000 each 338.00 1352.00

75 PWD Building 2015 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) 5.000 each 774.00 3870.00

76 PWD Building 2015 19.14.20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 5.000 each 577.00 2885.00

77 PWD Building 2015 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 10.000 each 436.00 4360.00

78 PWD Building 2015 19.16.3 40 mm nominal bore 10.000 each 596.00 5960.00

79 PWD Building 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 15.000 each 51.00 765.00

80 PWD Building 2015 20.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 150 mm diameter S.W. pipe 45.000 Rm 436.00 19620.00

81 PWD Building 2015 20.28 Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : 2.000 each 3796.00 7592.00

82 PWD Building 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 4000.000 litre 7.30 29200.00

83 PWD Building 2015 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. 10.000 Each. 1709.00 17090.00

84 PWD Building 2015 18.20.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 410x355 mm bowl depth 165 mm. 3.000 each 4095.00 12285.00

85 PWD Building 2015 17.1.1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : Thickness upto 15mm 485.000 each 132.00 64020.00

86 PWD Building 2015 14.96 Removing white or colour wash/distemper by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc.complete 1050.000 sqm 7.00 7350.00

87 PWD Building 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 275.000 kg 67.50 18563.00

88 PWD Building 2015 8.137.1 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm 16.000 each 238.00 3808.00

89 PWD Building 2015 8.139.2 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 200 x10mm 16.000 each 70.50 1128.00

90 PWD Building 2015 8.140.2 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm 16.000 each 22.50 360.00

91 PWD Building 2015 19.7.3 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: 25 mm dia. nominal bore 50.000 metre 258.00 12900.00

92 PWD Building 2015 19.8.3 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 25 mm dia nominal bore 50.000 metre 297.00 14850.00

93 PWD Building 2015 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm) 12.500 sqm 897.00 11213.00

94 PWD Building 2015 12.50 KOTA stone slab 25mm thick in risers and treads of steps, skirting dado and pillar laid in 12mm (Average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (single stone is to be used for riser and treads of steps and the width of stone for skirting and dado shall be equal to the height of skirting/ dado up to length of 1.0 M.) 2.450 sqm 990.00 2426.00

95 PWD Building 2015 14.56 Providing and applying 2mm thick white cement based polymeric Exterior grade Putty with minimum 3 coats applied @ 5.4 kg/ I 0Sqm as per relevant rs code 17545:2021 (Product such as Birla wall care, Asian trucare,JK wall putty, Berger Bison wall putty) to make the surface smooth and even with all tools tackles and labour etc. complete for the work. 650.00 sqm 86.00 55900.00

96 PWD Building 2015 14.59 Providing and applying Polymaric cement primer on all surface applied @ 0.80 litrs/10 sqm as per relevant LS. code 15489: I 974 (product such as Birla white primacoat/activcoat, Asian Truc!ll'e , Dulux interior cement primer, Opus Calista I I10 ) with all tool tackles and labour etc. complete for the work . 800.00 Sqm. 29.00 23200.00

97 PWD Building 2015 14.68 Providing and applying on exterior surface with PREMIUM Exterior emulsion paint of required shade to give protective and water proof finish minimum 3 coats applied @ 1.40 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D , C (Glossy /Semi Glossy finish ) (Product such as Asian Apex , Dulux Weather Shield Prima E900 , Berger Weathercoat Antidust , Nerolac Everlas Excel , Nippon Sumo Etra, Opus True flex) inclusive of providing abro tape on edges and articleand cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.(With 3Year Warranty.) 665.780 sqm 84.00 55926.00

98 PWD Building 2015 14.93 Providing and applying renewing satin/ matt finish Enamel paint one coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent LS. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel , Nerolac Synthatic Enamel, Opus Prime enamel ) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc.complete for the work. 170.000 sqm 83.00 14110.00

99 PWD Building 2015 18.4.3 Providing and fixing vitreous china pedestal type water closet (European type) with inbuilt 10 litre low level vitreous china flushing cistern, ISI marked plastic seat and lid (same colour), mosquito proof coupling complete: White 1.000 each 4415.00 4415.00

100 PWD Building 2015 18.1.3 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Orissa pattern W.C. pan of size 580x440 mm 6.000 each 2899.00 17394.00

101 PWD Building 2015 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 6.000 each 2882.00 17292.00

102 PWD Building 2015 19.12.3 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore. 8.000 each 218.00 1744.00

103 PWD Building 2015 14.62 Providing and applying Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applied @ 1.25 Kg/ I 0Sqm as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark ,Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work. 102.500 sqm 64.00 6560.00

104 PWD Building 2015 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2 nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. (iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric, flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120-140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white. (iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order. 275.000 Sqm 421.00 115775.00

105 PWD Building 2015 12.71 Providing and fixing 2mm thick homogeneous polyvinyl chloride sheet in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesive @ 0.25 kg per sqm of approved quality and manufacturer like Dunlop S-758, Fevicol SR 998 or equivalent including rolling with light wooden roller weighting about 5 kg. all complete in approved colour and shade. 42.000 sqm 506.00 21252.00

106 PWD Building 2015 18.13.1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm 3.000 each 1776.00 5328.00

107 PWD Building 2015 9.3.2 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-300 425.000 kg 93.50 39738.00

108 PWD Building 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 105.000 cum 371.00 38955.00

109 PWD Building 2015 10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 40.000 sqm 636.00 25440.00

110 PWD Building 2015 10.24.2 Providing & fixing UV stabilized fibreglass reinforced plastic (FRP) sheet roofing upto any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovings incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick flat 3.700 sqm 705.00 2609.00

111 PWD Building 2015 14.66 Providing and applying on exterior surface with LITE ECONOMY Exterior Emulsion paint of required shades to give protective and water proof finish minimum three coats applied @ 1.43 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D , C (Glossy/Semi Glossy finish ) (Product such as Asian ACE Spark ,Dulux Pomise exterior smait, Nerolac Littil Master, Berger Bison Lite, Nippon Superio etc) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor ai1d surface as required with all tools tackles and labour etc. complete for the work (With 2 Year Warranty.) 455.000 sqm 55.00 25025.00

Total 1999636.00

NIT SCHEDULE FOR

AR ESTIMATE FOR REPAIR AND MAINTANANCE OF VARIOUS BUILDING (R/NR)UNDER SUB DIVISION A. CHOWKI. DISTT : MOHLA MANPUR A.CHOWKI (C.G.)

Block- A.Chowki :- 1. Tahsil Office A.Chowki 2. Collage Building A.Chowki & FTC Building Meregaon, 3. Cort Building, A.Chowki 4. I.T.I. Building & ITI Hostel A.Chowki 5. G.A.D. & All Govt. R/Building Qtr, 6. B.E.O. Office,A.Chowki 7. Rest- House, A.Chowki 8. HSS Sonsaytola & Chachanpahri Building

S.O.R. for Buildind work for C.G.PWD Raipur in force form 01-01-2015 up to date ammandment will be applicable. P.A.C. 20.00 Lacs

S.N Department SOR Year Item Code PARTICULARS Qty Unit Rate Amount

1 PWD Building 2015 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.In all types of soil 122.500 cum 185.00 22663.00

2 PWD Building 2015 1.6.1 Extra for every additional lift of 1.5 m or part thereof. All types of soils 34.000 cum 26.50 901.00

3 PWD Building 2015 3.1.3 Providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 12.000 cum 2970.00 35640.00

4 PWD Building 2015 3.12.2 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawingsincluding cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 500D 1480.000 Kg 54.50 80660.00

5 PWD Building 2015 2.1.1 Providing and fixing formwork including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, base of columns and plinth beam in any shape and size. 112.000 sqm 139.00 15568.00

6 PWD Building 2015 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 36.000 sqm 297.00 10692.00

7 PWD Building 2015 2.1.8 Beams, lintels, cantilevers & walls 17.000 sqm 202.00 3434.00

8 PWD Building 2015 2.1.13 Weather shade, chhajja, Cornices and mouldings 20.000 sqm 294.00 5880.00

9 PWD Building 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 80.000 sqm 235.00 18800.00

10 PWD Building 2015 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 35.000 cum 3263.00 114205.00

11 PWD Building 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 121.00 30.000 cum 121.00 3630.00

12 PWD Building 2015 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 100.550 cum 65.00 6536.00

13 PWD Building 2015 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 12.000 each 100.00 1200.00

14 PWD Building 2015 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 12.000 each 66.50 798.00

15 PWD Building 2015 16.3.3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 17.000 Cum 263.00 4471.00

16 PWD Building 2015 16.42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead. 14.000 Cum 768.00 10752.00

17 PWD Building 2015 16.53.1 Removing following vitreous china sanitorywares carefully for re-use including stacking within 50 metres lead. Wash basin of all sizes and shapes 8.000 nos 30.50 244.00

18 PWD Building 2015 16.53.2 Urinals of all sizes and shapes 8.000 nos 38.00 304.00

19 PWD Building 2015 16.53.3 European/ Anglo Indian WC pan of all sizes 8.000 nos 46.00 368.00

20 PWD Building 2015 16.53.4 Cysten of all sizes and shapes 8.000 nos 34.50 276.00

21 PWD Building 2015 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 210.000 Sqm 11.00 2310.00

22 PWD Building 2015 16.8 Dismantling flag stone flooring laid in cement/lime mortar including stacking of serviceable material and disposal of unserviceable material within 50 metre lead. 35.000 sqm 57.00 1995.00

23 PWD Building 2015 16.43.2 Demolishing cement concrete including disposal of material within 50 metre lead. 1:3:6 or richer mix 5.000 cum 549.00 2745.00

24 PWD Building 2015 16.30 Dismantling steel work in single section in RS Joists, channels, angles, flats, I-section and T-section including dismembering and stacking within 50 Metres lead. 283.500 kg 0.70 198.00

25 PWD Building 2015 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level nominal size). 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 15.500 cum 4163.00 64527.00

26 PWD Building 2015 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 275.000 metre 87.00 23925.00

27 PWD Building 2015 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 850.000 sqm 91.50 77775.00

28 PWD Building 2015 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 455.000 sqm 107.00 48685.00

29 PWD Building 2015 11.5 Neat Cement punning. 74.000 sqm 33.00 2442.00

30 PWD Building 2015 9.12 Providing and fixing sliding shutter with M.S. sheet 1mm thick, frame and diagonal braces of 40x40x6mm angle iron, 3.0 mm thick M.S. gusset plates at junctions and corners, 25mm dia pulley, 40x40x6mm angle and T-iron guide at top and bottom respectively including applying a priming coat of red oxide zinc chromate primer. 215.000 kg 71.50 15373.00

31 PWD Building 2015 12.13.1 Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm 225.000 sqm 1082.00 243450.00

32 PWD Building 2015 12.9.2 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size above 300x300mm 61.000 sqm 728.00 44408.00

33 PWD Building 2015 12.7.2 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size above 200x300mm 90.000 sqm 646.00 58140.00

34 PWD Building 2015 12.45.2 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Granite stone black 6.500 sqm 2646.00 17199.00

35 PWD Building 2015 12.58 25mm thick un-polished Local RAJIM/ Red Flag stone slab flooring laid over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigments to match the shade of the stone. 5.000 sqm 428.00 2140.00

36 PWD Building 2015 9.47.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion 98.900 kg 331.00 32736.00

37 PWD Building 2015 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 154.000 kg 338.00 52052.00

38 PWD Building 2015 9.50.2 Providing and fixing 12mm thick pre-laminated particle board flat pressed with decorative lamination and balancing lamination on specified sides exterior Grade – I MDF Board 12 mm thick confirming to IS:14587, including fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete. With decorative lamination on both side 15.000 sqm 845.00 12675.00

39 PWD Building 2015 9.51.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness 14.500 sqm 708.00 10266.00

40 PWD Building 2015 9.44 Providing and fixing “NETLON insect screens” with 25mm wide Hook and loop tape all around to wooden/ aluminium/ steel windows, ventilators and the like complete. 12.500 sqm 278.00 3475.00

41 PWD Building 2015 8.15 Extra for double leaf shutter instead of single leaf. 8.250 sqm 52.00 429.00

42 PWD Building 2015 9.49 Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized. 252.900 kg 34.50 8725.00

43 PWD Building 2015 8.12.1 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 40 mm. thick (single leaf) 18.000 sqm 2467.00 44406.00

44 PWD Building 2015 8.58.1 Providing and fixing bright finished brass butt hinges with brass polished MS screws complete: 125x85x5.50 mm (Heavy Type) 5.000 each 245.00 1225.00

45 PWD Building 2015 8.60.1 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete: 300x16mm 5.000 each 475.00 2375.00

46 PWD Building 2015 8.62.1 Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete: 250x10mm 5.000 each 276.00 1380.00

47 PWD Building 2015 8.65.1 Providing and fixing bright finished brass door handles with brass polished MS screws complete: 125 mm 5.000 each 55.50 278.00

48 PWD Building 2015 19.4.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL 15 mm nominal outer dia .Pipes. 60.000 metre 110.00 6600.00

49 PWD Building 2015 19.4.5 40 mm nominal outer dia .Pipes. 50.000 metre 362.00 18100.00

50 PWD Building 2015 19.4.3 25 mm nominal outer dia .Pipes. 75.000 metre 199.00 14925.00

51 PWD Building 2015 19.5.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., 15 mm nominal outer dia .Pipes. 60.000 metre 133.00 7980.00

52 PWD Building 2015 19.5.2 20 mm nominal outer dia .Pipes. 55.000 metre 167.00 9185.00

53 PWD Building 2015 19.5.3 25 mm nominal outer dia .Pipes. 80.000 metre 213.00 17040.00

54 PWD Building 2015 18.5.1 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with ISI marked white plastic seat and lid, 10 litre PVC low level flushing cistern with fitting and brackets, 40mm flush bend, mosquito proof coupling complete, including painting of brackets, cutting and making good the walls and floors wherever required : White 1.000 each 4589.00 4589.00

55 PWD Building 2015 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 5.000 each 1430.00 7150.00

56 PWD Building 2015 18.74.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. 55.000 metre 182.00 10010.00

57 PWD Building 2015 18.74.2 110 mm dia pipe. 65.000 metre 267.00 17355.00

58 PWD Building 2015 18.77.1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm 5.00 each 113.00 565.00

59 PWD Building 2015 18.77.2.2 110 mm bend 5.00 each 154.00 770.00

60 PWD Building 2015 18.77.2.2 Double \"Y\" with or without door 110 mm 5.000 each 224.00 1120.00

61 PWD Building 2015 18.77.3.1 Vent covel 75 mm 5.00 each 34.00 170.00

63 PWD Building 2015 18.77.5 \"P\" trap 110mmx110mm long 10.00 each 227.00 2270.00

64 PWD Building 2015 18.77.6 Nahani trap 110x75mm 10.00 each 90.50 905.00

65 PWD Building 2015 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 15.000 each 382.00 5730.00

66 PWD Building 2015 19.14.2 Long nose bib cock (500 grams) 15.000 each 455.00 6825.00

67 PWD Building 2015 19.14.5 Two way bib cock (800 grams) 15.000 each 708.00 10620.00

68 PWD Building 2015 19.14.6 Stop cock (concealed) (600 grams) 15.000 each 494.00 7410.00

69 PWD Building 2015 19.14.11 Hand shower set with flexible extension pipe 5.000 each 754.00 3770.00

70 PWD Building 2015 19.14.4 Piller Cock (400 grams) 15.000 each 398.00 5970.00

71 PWD Building 2015 19.14.7 Angle valve for basin mixer and geyser points (450 grams) 15.000 each 382.00 5730.00

72 PWD Building 2015 19.14.10 Wall mixer with elegant knob (1400 grams) 5.000 each 1787.00 8935.00

73 PWD Building 2015 19.14.15 Shower rose (revolving type) (150mm) 4.000 each 269.00 1076.00

74 PWD Building 2015 19.14.16 Towel rail (600mm long x 20mm dia) 4.000 each 338.00 1352.00

75 PWD Building 2015 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) 5.000 each 774.00 3870.00

76 PWD Building 2015 19.14.20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 5.000 each 577.00 2885.00

77 PWD Building 2015 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 10.000 each 436.00 4360.00

78 PWD Building 2015 19.16.3 40 mm nominal bore 10.000 each 596.00 5960.00

79 PWD Building 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 15.000 each 51.00 765.00

80 PWD Building 2015 20.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 150 mm diameter S.W. pipe 45.000 Rm 436.00 19620.00

81 PWD Building 2015 20.28 Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : 2.000 each 3796.00 7592.00

82 PWD Building 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 4000.000 litre 7.30 29200.00

83 PWD Building 2015 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. 10.000 Each. 1709.00 17090.00

84 PWD Building 2015 18.22.3 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 410x355 mm bowl depth 165 mm. 3.000 each 4396.00 13188.00

85 PWD Building 2015 17.1.1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : Thickness upto 15mm 485.000 each 132.00 64020.00

86 PWD Building 2015 14.96 Removing white or colour wash/distemper by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc.complete 1050.000 sqm 7.00 7350.00

87 PWD Building 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 275.000 kg 67.50 18563.00

88 PWD Building 2015 8.137.1 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm 16.000 each 238.00 3808.00

89 PWD Building 2015 8.139.2 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 200 x10mm 16.000 each 70.50 1128.00

90 PWD Building 2015 8.140.2 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm 16.000 each 22.50 360.00

91 PWD Building 2015 19.7.3 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: 25 mm dia. nominal bore 50.000 metre 258.00 12900.00

92 PWD Building 2015 19.8.3 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 25 mm dia nominal bore 50.000 metre 297.00 14850.00

93 PWD Building 2015 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm) 12.500 sqm 897.00 11213.00

94 PWD Building 2015 12.50 KOTA stone slab 25mm thick in risers and treads of steps, skirting dado and pillar laid in 12mm (Average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (single stone is to be used for riser and treads of steps and the width of stone for skirting and dado shall be equal to the height of skirting/ dado up to length of 1.0 M.) 2.450 sqm 990.00 2426.00

95 PWD Building 2015 14.56 Providing and applying 2mm thick white cement based polymeric Exterior grade Putty with minimum 3 coats applied @ 5.4 kg/ I 0Sqm as per relevant rs code 17545:2021 (Product such as Birla wall care, Asian trucare,JK wall putty, Berger Bison wall putty) to make the surface smooth and even with all tools tackles and labour etc. complete for the work. 650.00 sqm 86.00 55900.00

96 PWD Building 2015 14.59 Providing and applying Polymaric cement primer on all surface applied @ 0.80 litrs/10 sqm as per relevant LS. code 15489: I 974 (product such as Birla white primacoat/activcoat, Asian Truc!ll'e , Dulux interior cement primer, Opus Calista I I10 ) with all tool tackles and labour etc. complete for the work . 800.00 Sqm. 29.00 23200.00

97 PWD Building 2015 14.16.1 Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 750.000 sqm 74.50 55875.00

98 PWD Building 2015 14.93 Providing and applying renewing satin/ matt finish Enamel paint one coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent LS. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel , Nerolac Synthatic Enamel, Opus Prime enamel ) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc.complete for the work. 170.000 sqm 83.00 14110.00

99 PWD Building 2015 18.12.1 Providing and fixing vitreous china pedestal type water closet (European type) with inbuilt 10 litre low level vitreous china flushing cistern, ISI marked plastic seat and lid (same colour), mosquito proof coupling complete: White 1.000 each 5108.00 5108.00

100 PWD Building 2015 18.1.3 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Orissa pattern W.C. pan of size 580x440 mm 6.000 each 2899.00 17394.00

101 PWD Building 2015 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 6.000 each 2882.00 17292.00

102 PWD Building 2015 19.12.3 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore. 8.000 each 218.00 1744.00

103 PWD Building 2015 14.62 Providing and applying Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applied @ 1.25 Kg/ I 0Sqm as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark ,Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work. 102.500 sqm 64.00 6560.00

104 PWD Building 2015 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2 nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. (iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric, flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120-140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white. (iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order. 275.000 Sqm 421.00 115775.00

105 PWD Building 2015 12.71 Providing and fixing 2mm thick homogeneous polyvinyl chloride sheet in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesive @ 0.25 kg per sqm of approved quality and manufacturer like Dunlop S-758, Fevicol SR 998 or equivalent including rolling with light wooden roller weighting about 5 kg. all complete in approved colour and shade. 42.000 sqm 506.00 21252.00

106 PWD Building 2015 18.13.1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm 3.000 each 1776.00 5328.00

107 PWD Building 2015 9.3.2 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-300 425.000 kg 93.50 39738.00

108 PWD Building 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 105.000 cum 371.00 38955.00

109 PWD Building 2015 10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 40.000 sqm 636.00 25440.00

110 PWD Building 2015 10.24.2 Providing & fixing UV stabilized fibreglass reinforced plastic (FRP) sheet roofing upto any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovings incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick flat 3.700 sqm 705.00 2609.00

111 PWD Building 2015 14.66 Providing and applying on exterior surface with LITE ECONOMY Exterior Emulsion paint of required shades to give protective and water proof finish minimum three coats applied @ 1.43 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D , C (Glossy/Semi Glossy finish ) (Product such as Asian ACE Spark ,Dulux Pomise exterior smait, Nerolac Littil Master, Berger Bison Lite, Nippon Superio etc) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor ai1d surface as required with all tools tackles and labour etc. complete for the work (With 2 Year Warranty.) 433.600 sqm 55.00 23848.00

Total 2000004.00