REPAIRS TO SANITARY PLUMBING TILING AND OTHER MISC. WORK AT E/M WATER INSTALLATION AT MIL STN KASAULI AND DAGSHAI UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Dismentling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified

Dismantling unframed fillets, rails, posts, rafters, purlins, etc under 40 sq. cm in section complete all as specified

S & F for second class hard-wood(Hollock), timber fixed and clean sawn, in scantlings complete all as specified

Same as item no 4.00 above but except timber---Do----

Material and Labour for 2nd class hard wood (Hollock) Plain fillets Exc13 & n. exc 25 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads,complete all as specified

M & L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coat of Creosote,complete all as specified

S&F Mild steel work for framed work such as grills, (12mm sqm bars for window / ventilators for guard bars) grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Material and Labour for Welded steel wire fabric n.exc 4Kg/Sqm supplied and fixed complete to wood or steel members complete all as specified.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified.

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in retaining wall ,parapet wall etc complete all as specified and directed

ditto- as above but except stone

Material and Labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Material and Labour for providing Reinforced cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, Beams, cantilevers, bressummers, all as specified. Note : (Reinforce bar paid and measured separately)

Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for Rendering 15mm thick in cement plaster 1:4 on Brick work/Masonry wall incl finishing surface fair and even w/o using extra cement complete all as specified and as directed .

M & L for Rendering 15 mm thick in cement plaster 1:6 on stone work incl finishing surface fair and even w/o using extra cement complete all as specified and as directed .

Material and Labour for rendering 20mm thick in cement plaster 1:4 on fair faces of stone masonry surfaces , finished fair and even smooth without using extra cement complete all as specified

Material and Labour .63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 120 ,complete all as specified

Material and Labour .63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120,complete all as specified

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed

M & L for 4 mm thick Non asbestos fibre cement building boards fixed in repair or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified & directed

Preparation of New Non-AC ceiling boards surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of oil bound distemper over one coat chalk whitening complete all as specified and directed.

Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and Fixing 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified in IS No 281-1991 and as directed .

Marterial and Labour for sheet glass 4.0mm thick, ordinary quality and glazing with oil putty/wooden beads in square n exc 0.5 sq m in each pane complete all as specified and as directed .

Supply and Fixing for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed .

M & L plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 6 sq.cm and not exc 13 sq.cm complete all as specified and as directed .

M&L preparation of new surface applying two coats of oil bound distemper on wall over a coat of 2mm th wall care putty over coat of chalk whiting primer.

M&L for preparation of plastered or unplastered new surfaces of walls of and applying two coat of cement base paint over a coat of cement priming coat of any approved tint complete all as specified & as directed.

Material and Labour for preparing old wood surfaces of any description, not otherwise descri-bed, over 10cm in width or girth, & applying one coats of synthetic enamel paint complete all as specified

Material and Labour for preparing new previously treated or untreated steel surface of any description, over 10cm in width or girth,not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified

M&L Preparation of new steel surfaces of any description, not exceeding 10cm in width or girth and treated two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M&L for preparation of plastered or unplastered old surfaces of walls and applying one coat of cement paint of any approved tint complete all as specified & as directed.

All as per Srl item No 6 above but two coats of cement paint complete all as specified & as directed.

M&L for prepartion of old painted steel surfaces exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified & as directed (except roof).

All as per item No 12 above but two coat of synthetic enamel paint complete all as specified and directed

M & L dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed .

M&L PCC 75mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring all as specified and directed.

M&L 75 mm thick Plain Cement Concrete (1:3:6) type C-2 using 40 mm graded stone aggregate laid in panels in plinth protection, even & fair surfaces without using extra cement all as specified.

S & F coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3, complete all as specified.

M & L Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors etc. , complete all as specified complete all as specified and as directed .

-ditto- as per item no 41.00 above but as in skirting incl 10 mm thick rendering in CM 1:3, complete all as specified

M & L Coloured Prepolished chequered cement conc tiles (30cmx30cmx25mm thick) in white cement and pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified.

Demolition of Reinforcement Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified.

Providing cement concrete type B1 1:2:4(20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. , with plain fair faces, including hamfers, weatherings, throat- ing etc. and setting in mortar 1:4 complete with joints to match all as specified .

M&LMachine pressed prepolished precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 80mm thickness, M-40 grade with grey cement with pigment over screed bed or bedding layer of mortar 20mm thick CM 1:6 for laying complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, for rough finished surface of concrete.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed .

S & F 75mm bore PVC (SWR) pipes single socketed in any length by using necessary clamps fixed trenches complete all as specified and as directed .

S & F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed .

S & F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement .

M&LCutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm & not exc 20 cm girth

S & F in repair for ISI marked 15mm bore chromium plated bib tap of cast copper alloy,fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified

S & F in repair of ISI marked 15mm bore ,chromium plated stop valve/Angle valve cast copper alloy screwed down, high pressure,fancy type, screwed both ends for iron pipe or for unions, complete all as specified

S & F in repairs Pillar cock, CP 15mm bore cast copper alloy with chromium plated screwed both ends,fancy type, screwed down hidh pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed in repairs, complete all as specified.

S & F in repair of 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified and as directed .

S & F in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed .

Dismantling existing tanks of capacity exc. 500 & n. exc. 1000 litre, and removing to store complete all as specified and directed.

M&L for rotational moulded polyethylene water storage tanks1000 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed.

S & F 15 mm bore ball brass valves high pressure with polythene float and flynut complete screwed or iron etc complete all as specified.

Taking up or down steel water tubing and connections of 15 mm bore fixed in any position complete all as specified.

Taking up or down steel water tubing and connections of 20 mm bore fixed in any position complete all as specified.

M & L for 15mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and directed .

M & L for 20mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and directed .

M & L in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified

S & F in repair sheet glass self asemblyconsisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket and guard rail

S & F 600mmx450mm bevelled edge mirror of selcted qulaity glass, mounted on 6mm thick AC building board or commerical ply wood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified.

S & F as in repair Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand and incl 32mm bore CP coupling long shank , waste fitting complete all as specified and as directed .

S&F in repair of Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),including plastic water closet seat, black, closed pattern with flat bottom and seat cover, and mild steel chromium plated or aluminised/ hinging device complete all as specified in repair.

S & F as in repair 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed .

M & L 75 mm bore PVC (SWR) floor trap , plain with grating including jointing with solvent cement etc complete all as specified

S&F 75 mm bore PVC (SWR) vent cowl, Complete all as specified and directed.

S&F of grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gm). Complete all as specified and directed.

S&F in repair for sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified.

S& F Stainless steel plate rack of size 24"X36"X10" made of 1 mm thick salem stainless steel sheet grade SS-304 with shelves, hooks and railing to keep plates vertically and horizontally, including necessary fixing arrangement fixed in repair complete all as specified.

Demolition of Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified.

M&L 12 mm thick Prelaminated particle board, interior grade prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L for piano hinges mild steel bright finish width of flap 40mm fixed in repairs including taking out the existing complete all as specified and directed.

M&L for hasp and staple 75mm size, safety type aluminium anodised including bolt to hinge plate and fixed in repairs to cup board shutter or kitchen cabinet shutters including taking out the existing complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed

Dismantling posts or struts (Wood, steel or RCC) any section including taking out embedded portion in concrete, brick work, masonary etc, and making good disturbed ground complete all as specified and directed

M& L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in foundations,filling and mass concerete etc complete all as specified.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded aggregate) in sub base of floor and foundation filling & mass concrete all as specified and diected

S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

M& L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410 W (Gde-E-250) quality -A etc complete all as specified and directed

S&F in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed 9each line wire to measured) complete all as specified and directed

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed screwed bothe ends, each screwed end to be fitted with washers and one hexagonal or square nut diameter of neck 5 to 10 mm exc 5 cm and n exc 10 cm long complete all as specified and directed

Supply only chain link fencing mild steel galvanised fencing any size or type complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc including provn of binidng wire complete all as specified and directed

S&F mild steel framed work in doors or gates (ornamental and decorative type) in angle or other section with gusset plates, rails, braces etc complete drilling for fixing and either hooks and bottom hinges grouted in ground or hanging fittings including 375 mm long sliding door bolts complete all as specified and directed.

M&L cement concrete in surface channels and drain type C-1 1:3:6 (20mm aggregate) complete all as specified and directed

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for PCC Type B1 1: 2:4 (20 mm graded stone aggregate )Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges as in coping ,kneelers , appex stone, coping etc

M&L for cement concrete 1:2:4 type B-1 ( using 20mm graded stone aggregate) as in hard standing including necessary form work and finishing surface even and fair without using extra cement complete all as specified and directed

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 100m or beyond the lead up to 2 km included in the rates, including loading, unloading and stacking at the destination all as specified and as directed.

Amount of credit of Rs. 72715.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

R. P. Suppliers and Construction Co.

Vishal Builder