Repair Maint to sunken floor chajjas roof projections facias parapets wall seepage roof treatment etc in OTM and MD accn in area of AGE BR II under GE west Jalandhar Cantt

Amount

Dismantling of Brick tiles or terracing tiles, single layer on roofs, complete all as specified and directed.

Demloition of mud in roof , any thickness including existing water proofing from roof slab, plastering and leeping (whether full thickness removed or a part thereof, sweeping clean and washing down with water etc, complete all as specified and directed.

M&L for PCC padding 1:2:4, type B-1(using 20 mm graded stone aggregate) as in roof padding in specified slope, complete all as specified and directed.

M&L for 10mm cement plaster on fair faces of brick work or concrete surfaces in CM 1:4, using WPC @3% by weight of cement or as per manufacturer's instructions, complete all as specified and directed. (Note :- Water proofing compound shall be measured and paid separately under respective item).

M&L for APP modified polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) as in roof treatment/sunken, laid on primed surface by forced application, over a coat of hot blown bitumen 85/25 @ 1.20 kg/Sqm etc., complete all as specified and directed.

M&L for 40 mm thick brick tiles laid over and including cement mortar 1:6 and joints grouted flush in CM 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified and directed.

All as per description of serial item No. 6 above but except tiles.

M&L for flush pointing to brick tiles, laid flat in cement mortar 1:3. complete all as specified and directed.

M&L for applying two coats of Aluminium paint over laid APP surface after proper cleanng the surface etc. for non accessible roof slab, complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregates) in roof kerbs or mud stops rounded or chemfered edges, complete all as specified and directed.

M&L for cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for cement concrete type E-2, 1:5:10 (using 40mm graded brick aggregate ) as in sunken flooring, complete all as specified and directed.

M&L for 15mm thick plasteing in CM (1:3) with WPC @3% by weight of cement or as per manufacturer's instructions, on walls as in sunken floor, finished even and smooth using extra cement complete all as specified and direced by Engineer-In-Charge. Notes- (i) After doing the plaster, leakage/seppage testing shall be carried out by ponding (for 72 hrs) on the sunken portion before further treatment to the sunken slab. Any leakage/seepage obserbed shall be rectified before carrying out water proofing treatment.. (ii) Water proofing compound shall be measured and paid separately under respective item.

Supply only integral waterproofing compound, ISI marked.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in flooring, finished even and rough to receive the topping layer, complete all as specified and directed.

M&L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 450x300x7 mm thick on vertical surface, laid over and including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.

M&L for GI pipe 40 mm dia medium grade be inserted at the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe up to two storey construction and 25 cm beyond two storey construction and all the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealant etc, complete all as specified and directed.

Taking up or down steel tubing bore of pipe in 15mm and connections, including cleaning for refixing or removal to store etc. complete all as specified and directed.

All as per description of serial item No. 21 above but of 20mm bore pipe.

S&F Steel tubes medium grade, bore of tube in 15mm galavanised with all fitting, laid in trenches, walls, ceiling or laid in floors etc. complete all as specified and directed.

S&F Steel tubes medium grade bore of tube in 20mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc., complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete not exceeding 150 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4, type B-l as required, complete all as specified and directed.

Taking down eaves gutter and rain water pipes (any size and pattern), including all fittings, heads, shoes, bends, swan necks, etc. removal from site (measured overall as fixed along the centre line or fittings and accessories) complete all as specified and directed.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F 110 mm bore PVC(SWR) bend any radius, complete all as specified and directed.

S&F 110 mm bore PVC(SWR) bend any radius provided with ovel access door, complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) 'P’ trap, complete all as specified and directed.

S&F PVC (SWR) floor trap of size 75 to 100mm outlet dia, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints,fixed to wall, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints,laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius provided with access door, complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

S&F 75mm PVC (SWR) vent cowl, complete all as specified and directed.

S&F in repairs stack clamps for bore dia of pipe 100mm/110mm, made out of 50 mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

S&F in repairs stack clamps for bore dia of pipe 75mm, made out of 50 mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof. complete all as specified and directed.

S&Fin repair vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding , complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices with recessed bottom, brass chromium plated jet spray including PVC flexible pipe alongwith complete necessary fittings, etc. complete all as specified and directed.

S&F in repairs brass chromium plated jet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete in all respect as specified and directed.

S&F in repair Low Level Flushing cistern PVC valveless syphonic action type, 10 ltrs capacity including supply pipe & fixing brackets of MS angle of size 25mmx25mmx3mm, 30 cm long in PCC (1:2:4) type B-1, block of size 10cmx10cmx10cm on walls etc. complete all as specified and directed.

S&F in repair Vitreous China Wash Basin with full pedestal, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed including 15 mm dia Pillar taps, cast copper alloy with capstan heads swan neck Chromium Plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe but fancy type and fixed etc, complete all as specified and directed.

S&F in repair Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed including 15 mm dia Pillar taps, cast copper alloy with capstan heads swan neck Chromium Plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe but fancy type and fixed etc. complete all as specified and directed.

S&F in repairs vitreous china Urinal, Half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and directed.

S&F in repairs vitreous china urinal partition white of size 310x700 mm, complete all as specified and directed.

S&F waste coupling including waste pipe suitable for urinals, bore dia of discharge pipe 32mm of PTMT (half or full threaded), (Minimum weight 45gms), complete all as specified and directed.

S&F urinal spreader of brass chromium plated, any colour for fixing with 15 mm dia pipe. Complete all as specified and directed.

S&F in repair fancy type, brass chromium plated stop valves/Angle valves, cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair fancy type, brass chromium plated stop valves/Angle valves with long shank and cup (concealed type), cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repairs chromium plated long body bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe , complete all as specified and directed.

S&F in repair; 15mm bore swan neck pillar taps, cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, complete all as specified and directed.

S&F in repair gun-metal, globe or gate valves for 20mm bore dia of pipe, with iron wheel head, screwed both ends for iron pipe and fixed to steel pipe or union, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc. complete all as specified and directed.

S&F in repairs brass chromium plated of stainless steel toilet paper holder with flat recessed type fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed.

S&F in repairs 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Dismantling PVC water tank of capacity 500 Ltr and S&F new rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top), double layered, ISI marked, hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Dismantling PVC water tank of capacity 1000 Ltr and S&F new rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top), double layered, ISI marked, hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Dismantling PVC water tank of capacity 2000 Ltr and S&F new rotational moulded polyethylene water storage tank of capacity 2000 ltr (cylindrical vertical with closed top), double layered, ISI marked, hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Taking down chowkats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames with shutters exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames), complete all as specified and directed.

S&F solid PVC frame as in door of size 50mm x47mm made out of 5mm plain colour PVC PVC sheet reinforced with M.S. Square tube and suppyling & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F stainless steel steel butt hinges cold rolled of size 100mm, medium weight, complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts 200mm long of extruded section and fixed, complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 150mm etc., complete all as specified and directed.

S&F factory made steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two openable leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded crushed stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window - 04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3.

All as per description of serial item No. 71 above but window with glazed shutter.

S&F mild steel work as in as in grill gratings etc with ends of bars shouldered and or riveted or fixed in spike, framed guard bars barred iron doors ladders frame balusters walk ways confirming to Fe- 290, Gde E-165 complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per description of serial item No. 75 above but except bricks.

M&L for Brick work with sub class 'B' bricks using old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls, finished fair and even, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces on ceiling, finished even and smooth without using extra cement etc., complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces and distempering walls with two coats of distemper oil emulsion, white or tinted over a coat of primer over and including 2 mm thick finished coat of wall care putty, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of White wash, complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling surfaces etc., complete, all as specified and directed.

M&L for complete removal of existing treatment and preparation of surfaces and applying three coats of white wash on ceiling surfaces etc., complete, all as specified and directed.

M&L for preparation of old decorated surface of wall and applying one coat of cement base paint (upto 3 storey bldg) complete all as specified and directed.

M&L for complete removal of existing treatment, preparation of surfaces and applying two coats of cement base paint, over a coat of primer, complete all as specified and directed.

M&L for prepration of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed.

M&L for repairing of RCC projections, chajjas, roofs, facia etc in patches not exceeding 3 Sqm in each patch by necessary preparation by scrapping, cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement mortar (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforced with welded mesh (if reqd) of weight exceeding 2 Kg per Sqm but not exceeding 3 Kg /Sqm with or without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area not exceeding 5 Sqm each and thickness of RCC member not exceeding 75mm including necessary formwork and applying two coats of finishes to match with the existing surfaces in at any height, complete all as specified and directed. Note :- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to wodden doors and steel to steel windows, complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to wodden doors and steel to steel windows. Complete all as specified and directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane including hacking out old broken glass in wooden/steel frame, complete all as specified and directed.

Disconnecting existing tanks, setting aside for cleaning, reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of tank capacity exceeding 250 Litre but not exceeding 500L, complete all as specified and directed.

Disconnecting existing tanks, setting aside for cleaning, reconnecting and re-fixing in position after cleaning,and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of tank capacity exceeding 500 litre but not exceeding 1000 litre, complete all as specified and directed.

Disconnecting existing tanks, setting aside for cleaning, reconnecting and re-fixing in position after cleaning,and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of tank capacity exceeding 1000 L but not exceeding 2000 litre, complete all as specified and directed.

Supply and fix in repairs shower rose of brass chromium plated with shower arm 195mm long with bend of 45 degree 15mm dia, complete all as specified and directed .

M/s R.N Construction Co. (BID ID -3426558)

SANDEEP JHANJI CONSTRUCTIONS (BID ID -3431888)

M/s PANKAJ KUMAR (BID ID -3429079)