Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 LAccepted-AOC | L1 | Accepted-AOC - | |
| 2 | L2₹2.1 L+₹89 (0.04%)Rejected-Finance SF 216 1 DHANDAPANI 3 225 PULIAMTHOTTAM K KRISHNAPURAM KAMANAYAKAMPALAYAM 1831 PALLADAM | DINDIGUL | TAMIL NADU | 624001 | L2 | Rejected-Finance More than L1 |
Tender Value
₹2.5 L
EMD Value
₹2,500
Closing Date
16 Jun 2023, 3:00 pmClosed
EXECUTIVE OFFICER
SOUTH CAR STREET VAITHEESWARANKOIL TOWN PANCHYAT
Providing Borewell pipeline and 3HP Motor at Maruvathur Periya Street
2023_DTP_326436_1
214/2023
Open Tender
Civil Works
Works
180 days
VAITHEESWARANKOIL TOWN PANCHAYAT
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹2,500
Yes
VAITHEESWARANKOIL TOWN PANCHAYAT
23 Mar 2024
12 Jun 2023
16 Jun 2023
12 Jun 2023
16 Jun 2023
12 Jun 2023
14 Jun 2023
Amount
Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, leveling, sectioning breaking clods etc., including all incidental charges etc., complete as per standard specification . for Foundations SS 20B
Supply delivery and filling of River Sand in layer of not more than 15 cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyence of sand to Site and all labour charges and all other incidential charges etc,. complete as per Standard Specification
Cement concrete of mix 1:4:8 (One cement Four sand Eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.
Brick work in Cement Mortar in 1:5 ( One cement and Five Sand ) using best quality of Country bricks of size 8¾x 4 ¼ x 2 ¾ including all cost of materials and labour charges including Curing charges etc., complete as per Standard Specificationand as directed by department officials.
Plastering walls with cement mortar 1:5 (One cement five sand) 12mm thick in all floors and all exposed surfaces including cost and conveyance of materials to site and all labour charges,Curing etc completeand as directed by department officials..
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification
Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140mm dia and then enlarging to 150mm dia bore by direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling benonite and water required for drilling at site. Site will be shown by the Departmental officers including construction of mud pit..upto 60m depth ending below ground level
Upto 60 mt. Depth ending below ground level
Reaming 200/350mm dia pilot bore to 300mm dia bore as directed by the Departmental officers.
Upto 60 mt. Depth ending below ground level
Supply of the following casing pipes of ISI approved quality with wall thickness not less than 7.5mm to 8.5mm with PVC couplers and cement Paste etc. Complete and including packing the annular space with pebbles quality and size of pebbles and the PVC pipe should be approved by the departmental officer.
150mm dia OD PVC Plain casing Pipe (CS)
150mm dia OD PVC slot casing Pipe (RS)
150mm dia OD PVC end cap
Labour charges for inserting150 mm dia OD PVC casing pipes assembly. (with slots and without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste including supplying and packing of pebbles in anular spaces as approved by the Asst.Exe.Engineer.
Charges for developing the borewell with air compressor of 600CFM. Capacity (minimum 8 hours ) including transportation labour and fuel charges for compressor as directed by the Departmental Officers and conducting yield test by 'V' notch methods.
supply and delivery of 3 HP Three phase Submersible pumpset of duty condition 50lpm x 60 m as per IS 8034 without panel board etc complete as per standard specification.
Supply and delivery of THREE PHASE SUBMERSIBLE PUMPSET AS PER IS 8034/2002 WITHOUT PANEL BOARD of duty condition 20 lpm x 70 m head etc complete as per standard specification.
Supplying and delivery of 2.5Sq.mm of PVC insulated and sheathed 3 core flat type copper cable confirming to IS694/ 1990 etc complete as per standard specification.
Labour charges for the errection of 1HP submersible pumpset in the Borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth walls errection clamps pressure gauges up to the exterior wall of pumping room and errection of panel board consisting of DPICN switches starter volt meter ammeter, Three Pilot ( Indicating ) lamps capacitor single phasing preventer water level guard and laying and jointing the cable s and twin earthing as per IE rules etc complete and testing to the pumpset and trial run for 10 Days.
Supply and delivery and fixing of HDPE tank 1000 litres capacity as per IS 12701/ 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges as directed by departmetal officers.
Supply and delivery and fixing of M.S Kisok of size 0.75mx0.45mx0.75m made up of m.s angle size 50mmx50mmx4mm allround covered with 16 gauge M.S sheet and kisok door made up of this M.S plate of size 25mmx3mm Including cutting ,welding grinding locking arrangements
S.Karthikeyan
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .