Power Supply to water sprinkler pump of line-01 from 100KVA DG set installed near pump House line no.04 at shivpur railway Siding under Amrapali OCP, A-C Area

Amount

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.

Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc. as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per meter) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc. including drilling of holes for insulator pins etc. (as per drawing) and painting with primer and finished paint as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq. mm and upto 95 sq. mm

Erection of angle iron/ channel iron cross arm on wood/ RCC/PCC/ steel tubular/ rail pole etc. as required.

Supplying and erection of 75 mm X 90 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required.

Supplying and erection of 100 mm X 65 mm pin insulator complete with G. I. Spindle and nuts etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 meter long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/3.15 mm dia G.I. stay wire and strain insulator etc. in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 A, 36kA, FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 200 A, 36kA, FPMCCB

Supplying, installing, testing and commissioning of following capacity End Feed Unit made of 1.6mm thick sheet steel enclosure duly painted with powder coating to existing rising mains complete with TPN disconnector FSU and HRC fuses,mounting stands, cable end box, brass compression gland,connections, earthing etc. as required. 200 A, TPN

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A, 415 V “C” curve TP MCB complete with connections, testing and commissioning etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supply and Erection of cradle guard as required.

Supply and fixing of 200Amp,4P,415V,3Ph, fully inclosed cover, ON Load Change Over switch

Total impact of GST for the purpose of CTC

M/S S.K. ENTERPRISES

M/s ROHIT SHARMA