PETTY REPAIR OF SOUTH CAMP AND 4 AFSR SMQ AND OTM AND MAINT OF INTERNAL AND EXTERNAL FINISHES TO MD/OTM ACCN IN SOUTH CAMP UNDER AGE B/R-II AT AF STN BAMRAULI

Amount

Resecuring or easing of door shutters for easy closing / opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing iron mongry exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed.

Taking down door shutters and changing of unserviceable existing butt hinges and re-fixing in same opening including welding etc exc 1 Sqm and n.exc 2 Sqm complete all as specified and directed.

S&F in repair of 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F in repair of 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair of 150 mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repair of 100 mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repair of 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed as in repairs including taking down the unserviceable existing complete all as specified and directed.

S&F in repair of mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed as in repair including taking down the unserviceable existing complete all as specified and directed.

Hacking out old broken glass (any thickness) size quality etc from any frames fixed with pin, beading or oil putty complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty or beading in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

All as per item No 10 above but 4.8 mm thick tinted glass in square exc 0.5 Sqm in each pane

All as per item No 10 above but figured glass 4mm thick, complete all as specified and directed.

S&F in repair of curtain rods 20 mm bore, mild steel, chromium plated with fixing brackets, stops, rollers, knobs/finials etc complete all as specified and directed.

M&L for in reapair of rubber bead/seal 40mm wide and 3-4mm thick to cover doors/window gap fixed with nails and make good to doors as in repair complete all as specified and directed.

S&F in repair of 0.56mm thick aluminum sheet fixed to wooden shutter with brass/aluminum screws including taking out existing aluminum sheet in repairs complete all as specified and directed.

S&F in repair of 100mm size Butt hinges, medium weight, cold rolled mild steel, and fixed including welding if reqd complete all as specified and directed

S&F in repair of 75mm size Butt hinges, medium weight, cold rolled mild steel, and fixed including welding if reqd complete all as specified and directed

M&L for in repairs of 100 mm long mild steel handle for steel window complete all as specified and directed.

Taking down existing aluminium door and re-fixing the same after replacement of rubber beads, luck, door stoper, Handles etc and minor repairs in Hydrolic door stoper or adjustments and refixing the taken glass etc complete all as specified and directed.

S&F in repair of 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair of 32mm dia PVC flush pipe for low level flushing cistern long type complete all as specified and directed.

S&F in repairs of 15mm Bib tap dia of pipe standard of PTMT white colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs of 15mm Bib tap dia of pipe standard of PTMT long body white colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair of fancy type pillar tap of PTMT, 15mm dia of white colour complete all as specified and directed.

S&F 15mm bore stop vale of PTMT white colour high pressure screwed for iron pipe fixed in repairs screwed down, high pressure with fancy type handle fixed in repair complete all as specified and directed.

S&F in repair of 15 mm bore (concealed) stop cock ISI marked, cast copper alloy, screwed down, high pressure, fancy type, chromium plated handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make : PRAYAG Cat Part No.5218 or equivalent as per list of makes.

S&F in repair of brass chromium plated shower rose 125mm size including Nipple, socket and other fittings etc complete all as specified and directed. Make : PRAYAG Cat Part No.BS-66 or equivalent as per list of makes.

M&L for 15mm dia pillar taps CP brass with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair including taking out the existing pillar tap complete all as specified and directed. Make : PRAYAG Cat Part No .5202 or aequivalent as per list of makes.

S&F in repair of 15mm dia Bib taps fancy type cast copper, with crutch or butterfly handle screwed down, screwed for Iron pipe or for brass ferrule complete all as specified and directed.. Make : PRAYAG Cat Part No.5206 or equivalent as per list of makes.

S&F in repair of 15mm dia stope valves/angle cock fancy type chromium plated with long shank and cup (concealed type) cost copper alloy screwed down, high pressure withcrutch or butter fly handle screwed both ends for iron pipe complete all as specified and directed.. Make : PRAYAG Cat Part No.5210 or equivalent as per list of makes.

S&F in repair of health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. Make : PRAYAG Cat Part No BEA-81 orequivalent as per list of makes.

S&F in repair of towel rail 600 mm long and 20mm dia of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. Make : PRAYAG Cat Part No.BA-10 or equivalent as per list of makes.

S&F in repair of shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed.

S&F in repair of plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. Make : PRAYAG Cat Part No.721 or equivalent as per list of makes.

S&F in repair 25mm bore flush cock half turn brass chrominium plated with adjustable flange complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete.(Make : PRAYAG Cat Part No.501 or equivalent as per list of makes.)

S&F in repair of 15mm dia PVC connection of length 450mm fixed as in repair including taking out the existing unserviceable complete all as specified and directed.

S&F in repair of 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as speified and directed.

S&F in repair of PVC waste pipe 32mm dia, 90 cm long for wash hand basin complete all as specified and directed.

S&F in repair of PVC waste pipe 40mm dia, 90 cm long for wash hand basin complete all as specified and directed.

S&F in repair of waste coupling of PTMT (half or full thread), 32mm dia with minimum weight 45 gm complete all as specified and directed.

S&F in repair of waste coupling of PTMT (half or full thread), 40mm dia with minimum weight 60 gm complete all as specified and directed.

S&F in repair of mild steel angle iron bracket with 25x25x3mm angle iron for WHB including steel painting and making good disturbed surface complete all as specified and directed.

S&F in repair of PVC Syphon kit suitable for PVC Cistern complete all as specified and directed

S&F in repair of stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, CP weast cuppling , washers waste pipe, cast iron cantilever brackets, connecting union overall size 914mmx460mm with bowl size 405mm x 354mm x 203mm, complete all as specified and directed.

S&F in repair of stainless steel plate rack of size 600x750x250mm complete all as specified and directed.

S&F in repair of 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight-210gms complete all as specified and directed.

S&F in repair of PVC cover (Lid) for OHT of capacity 500/1000 Ltr complete all as specified and directed.

Repairing only for leakage of rotational moulded polythene three layer water storage tanks position 500ltrs capacity including disconnecting the tank with rapair the leakage portion using M seal, 2Nos of 20 to 25mm GI union and checked nut etc complete all as specified and directed.

Supply & Fixing in repair rotational moulded polythene triple layer water storage tanks, hoisted and fixed in position 500ltrs capacity including 2 Nos GI union, checked nut and 20mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia, 2 Nos nipple including taking down old PVC tank. complete all as specified and directed.

S&F rotational moulded polythene water storage tanks , hoisted and fixed in position 1000ltrs capacity includin GI union, checked nut and 20mm PTMT float Valve, including taking down old PVC tank. complete all as specified and directed.

S&F rotational moulded polythene water storage tanks, hoisted and fixed in position 500ltrs capacity including GI union, checked nut and 20mm PTMT float Valve, complete all as specified and directed including dismantling of old PVC tank and removing to store

Labour only opening of air lock in toilets/ bath and kitchen but excluding fittings complete all as specified and directed.

M&L for 15mm dia GI tubing medium grade with all fittings, fixed as in repair to walls, ceiling or laid under floors including taking down unserviceable existing line complete all as specified and directed.

All as per item No 55 above but 20 mm dia, complete all as specified and directed.

S&F in repair of grating doom 100mm dia of CP, complete all as specified and directed.

Repair only to CP long body bib taps , pillar tab,bib tap, etc of any make by replacing spindle, nippule, washer, knob etc at any size etc complete all as specified and directed.

Taking down soil, waste and rain water pipes of 110/75/50 mm dia (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc.

S&F in repair of 110 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete all as specified and directed.

S&F in repair of 75mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete all as specified and directed.

S&F in repair of 50mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete all as specified and directed.

S&F in repair of 110mm PVC (SWR) bends or elbow of any radius complete all as specified and directed

S&F in repair of 75mm PVC (SWR) bends or elbow of any radius complete all as specified and directed

S&F in repair of 50mm PVC (SWR) bends or elbow of any radius complete all as specified and directed

M&L for filling white cement on floor/wall tiles joints including removing old fillings etc complete all as specified and directed.

S&F in repair of PVC shower rose 75mm size including Nipple, socket and other fittings etc complete all as specified and directed.

S&F solid PVC wall lining (wall panelling) consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F CP bib tap 15mm dia fancy type including Socket & Nipple. complete all as specified and directed.

S&F in repair CP stop cock/angle cock 15mm dia fancy type including Socket & Nipple.

S&F CP shower rose of any dia fancy type including Socket & Nipple. complete all as specified and directed.

S&F in repair PTMT bib tap/Long body 15mm dia fancy type including Socket & Nipple.

S&F in repair of PVC flushing cistern, flushing pipe including all fittings etc complete all as specified and directed.

S&F in repair of stainless steel sink of any size with coupling including white cementing along wall side etc complete all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar complete all as specified and directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for 20 mm thick granite work table rubbed and polished for wall lining /kitchen platform over 12mm thick cement mortar 1:3 thick and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises for minor repair to floor tiles/ nahani traps and repair to concealed stop cock and GI tubing in wall etc in patches complete all as specified and directed.

M&L for non skid ceramic tiles coloured 300mmx300mmx 7 to 8 mm thick (square/ rectagular) area of each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc complete all as specified and directed.

M&L for non skid ceramic tiles coloured 7 to 8 mm (square/ rectagular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc complete all as specified and directed.

M&L for double charged vitrified ceramic coloured tiles of size of tiles exc .36 Sqm But Not Exc .42 Sqm in each tiles (square/ rectagular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tiles including 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.

All as per Item No 82 above but as in skirting set & jointed in neat slurry and pointed in white or colour cement to match the shade tile including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 450x 350x7 mm thick tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc complete all as specified.

Taking down chowkats or frames with shutter not exceeding 1.5 Sqm each (without taking off shutters from the frames)

Taking down chowkats or frames with shutter exceeding1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames)

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as specified and directed.

S&F Aluminium (powder coated) sliding glazed shutter of suitable size with necessary joining cleats, glazing clips, rubber gasket, aluminium snap beading and locking arrangement at both end complete all as specified and as shown and drawing. Notes : (i) Frame and Glass filling in panels to windows shall be measured and paid for separately under respective item. (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv) Aluminium section shall be as per drg No. CE/ALD/TD-194 sheet No. 1/2 & 2/2

S&F Aluminium powder coated door shutters type with top rail lock rail, bottom rail, styles etc including joining cleats, glazing clip, gasket, beading with locking arrangement complete all as specified and directed. Notes : (i) Frame, glass and particle board panel shall be measured and paid for separately under respective item of schedule 'A' part V. (ii) Frame floor spring, builder hardware shall be measured under of schedule 'A' part IV. (iii) Aluminium section of shutter shall be as per Drg No. CE/ALD/TD-224 sheet No. 1/1.

Supply only 5.5 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with rubber beading in square exc 0.5 Sqm in each panes complete all as specified and directed.

S&F powder coating aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. (minimum thickness of powder coating 50 micron).

Supply only 5.0 mm thick wood grain finish ACP exc 0.5 sqm each to fixed on aluminium frame complete all as specified and directed.

S&F rebated mortice aluminium lock verticle type size 100mm with 4 levers complete all as specified and directed. .

M&L for water proofing treatment for existing sunken portion by complete demolition of existing leakage sunken portion area exceeding 1 Sqm and N exc 1.5 Sqm and cleaning the surface and applying cement slurry and 10mm thick cement plaster in CM 1:3 mixing with liquid water proofing compound after surface is fully dried, cleaned free from dust and painting with a coat of bituminous primer@ 0.3 liter / Sqm after primer the entire surface, applying with hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2Kg / Sqm, over hot bitumen, providing polymeric water proofing membrance consisting of 90 to 100 micron thick central core of HMHDPE fill with standard weight not less than 3Kg/Sqm provide with 100mm side lap/end lap after that fixing P trap and filling sunken portion in PCC 1:5:10 type E-2 appox 30cm high and PCC 1:2:4 type B-1 using 20mm graded stone aggregate, supply & fixing new vitrious china Wated Closet pan orrisa pattern, size 580x440mm with integral foot rest excluding flushing cistern & flush pipe complete all as specified and directed. Note : (i) Rate quoted by the contractor shall deemed to be included for testing of treatment as directed.

S&F providing & fixing false ceiling at all heights with fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG (Glass Fibre W Reinforced Gypsum) false ceiling tiles of pe Size 595 x 595 mm of approved texture, 12 design and patterns having moisture mi content less than 2%, humidity resistance ed- of 99%, NRCO.50 to 0.75 as per IS:8225:1987, Non combustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200 mm and secondary intermediate cross-T of size 15 X 32 mmn of length 600 mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) te 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L -shape level adjuster of size 85x25x2mm Galvanised iron perimeter wall angle of size 24x 24x 0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mn center to Center and 4Omm long dry wall wood screws, The work shall be Carriod out as per specifications, drawing and as per directions of the Engr-in- Charge incl removal of existing false ceiling.

S&F in repair of vitreous china squatting pan Orissa pattern, size 580 x 440mm, (excluding flushing cistern & flush pipe fixed including connection to trap and to flushing pipe,anti sphonage pipe etc.) making good the disturbed surfaces and to match with existing surface and taking out the existing pan complete all as specified and directed.

S&F in repair of vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device.

S&F in repair of vitreous china wash hand basin, white, flat back, size 580 x 450mm excluding taps, waste, chain and plug and porcelain stopper but including pvc connection pipe of 450mm length, waste coupling of 32mm dia of PTMT, MS brackets including cutting for and pining in ends of brackets complete all as specified and directed.

S&F PVC cabinet frame of size 18mm x75mm made out of 18mm thick celuka PVC sheet minimum 600 Kg/cum density grade 1 quality rudrak colour and frame shall be fixed with 50mm long steel screw inside using drilling machine and plastic fasteners.

S&F PVC cabinet box and shutter made out of 18mm thick celuka PVC sheet minimum 600 Kg/cum density grade 1 quality rudrak colour one side PVC prelaminated wood grain board and shutter will be fixed on the PVC frame with auto hinges and steel screw including fancy type stainless steel handles complete all as specified and directed.

S&F 18-19 mm thick block board grade 2 quality interior grade quality, decorative type with decorative face veneer on one face as in cupboard shutters,shelves and pelmet boxes fixed with screw to timber frame work complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and directed by the Engr-in-Charge

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supply & fixing in the frame at site as per specification & drawing complete all as specified and directed by the Engr-in-Charge.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging of Fe-410-W(Gde-E250 quality B) also fastening and fixing complete all as specified and directed.

S&F in repair of vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete incl providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60 mm long brass screws,pointing around urinal back in cement, fixing flush pipe complete all as specified and directed.

S&F 35 mm thick 2nd class Hard wood of Glazed and skelton shutters, open rebated and prepared to receive glass, gauze,etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing class etc, size of members of shutters as specified in SSR Part-I

S&F 35 mm Flush shutters, solid construction, with block board core and playwood face panels, commercial type on both side complete all as specified and directed.

S&F 100 mm but hinges, medium weight cold rolled mild steel and fixed. complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section. complete all as specified and directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised. complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including all fittings i.e. switch, sockets, ceiling rose, regulators, batten holders etc. Complete all as specified and directed and making food disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings, complete all as specified and directed.

M&L for point wiring complete with 1.5 sqmm single core PVC insulated FRLSH cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI marked and including provision of 1..5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in wall with suitable modular inner and outer plate for housing switches, socket outlet and fan regulators etc, complet all as specified and directed for the following:-

(a) One light/fan/bell point cibtrolled by one switch single pole one way

(b) All as per item No 116.01 above but one 3 pin 6 amps switch socket outlet independent

(c) All as per item No 116.01 above but one 3 pin 6 amps socket outlet on the same board with other switch complete all as specified and directed

All as per item No 116 above but using 02 Nos 2.5 sqmm size for main cable and 01 No 2.5 sqmm size as earth conductor for one 16 Amp switch socket outlet on independent board, complete all as specified and directed.

S&F switch modular flush 6A single pole one way ISI marked, complete all as specified and directed.

S&F modular sockets 6 Amp 2 in 1 2/3 pin combined complete all as specified and directed.

S&F switch modular flush type 15/16 Amp single pole one way 240 volt oen module ISI marked.

S&F modular sockets 16 Amp 2 in 1 3/5 pin combined complete all as specified and directed.

S&F ceiling rose surface bakelite 60x25mm three terminal, complete all as specified and directed.

S&F LED lights fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

S&F LED lights fitting mirror type with high out put diffuser 2 feet, 10watt, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished fair and even using water proofing compound @3% by weight of 50 kg cement as per manufacturer instructions complete all as specified and directed. (Note: water proofing compound shall be measured and paid seperately under respective item).

M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed.

M&L for repair to chajja upto height of bldg 9.00 mtr, area not exc 1.00 Sqm with 15mm thick in cement mortar 1:4 on faces concrete surfaces, finished fair and even incl benching with PCC 1:2:4 using 12.5 mm aggregate using water proofing compound @ 3% by weight of 50 kg cement as per manufacturer instructions complete all as specified and directed. (Note: water proofing compound shall be measured and paid seperately under respective item).

Supply only Integral waterproofing compound complete all as specified and directed.

M&L for applying three coats of white wash on ceiling incl preparation of new plastered surfaces complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over 1 mm thick wall care putty complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted complete all as specified and directed.

M&L for brooming down plastered/unplastered old decorated surface of wall incl cornice etc and applying two coat of white wash complete all as specified and directed.

All as per item No 134 above but on ceiling, complete all as specified and directed.

M&L for preparation of old decorated surface of wall incl cornice etc and applying one coat of oil bound distemper in any colour complete all as specified and directed.

All as per item No 136 above but two coats of oil bound distemper in any colour on wall complete all as specified and directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, applying two coats of distemper, oil emulsion white or tinted over and including 1 mm thick wall care putty complete all as specified and directed.

All as per item No 138 above but on ceiling complete all as specified and directed.

M&L for preparation of old treated wooden surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No 140 above but on steel surface complete all as specified and directed.

M&L for brooming down plastered/unplastered old decorated surface of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for brooming down plastered/unplastered old decorated surface of walls and applying two coat of cement base paint complete all as specified and directed.

M&L for preparation of old decorated concrete/brick/stone or plastered surface of any description over 10 cm width or girth not otherwise described and applyhing one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) complete all as specified and directed.

M&L for preparation of old surfaces of wall any type applying two coat of exterior emulsion paint over 1 mm thick putty complete all as specified and directed.

M&L for preparation of old decorated plastered/unplastered surface of walls and applying one coat of plastic emulsion paint complete all as specified and directed.

M&L for complete removal of existing treatment and applying 1 mm thick wall care putty with two coat plastic emulsion paint complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30cm height complete all as specified and directed.

Hacking out old broken glass ( any thickness) size quality etc from any frames fixed with pin, beading or oil putty upto height of bldg 8.00 mtr complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material

OASIS CONTRACTORS BUILDERS & SUPPLIERS (BID ID -3384287)

M/S V K MEHROTRA (BID ID -3384443)

R K CONSTRUCTION COMPANY (BID ID -3385090)

HIMANSHU TRADERS (BID ID -3381671)