Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹5.1 LAccepted-AOC BILASPUR | ₹5.1 L | L-1 | Accepted-AOC Bidder quoated a lowest rate in submitted bid. |
| 2 | L-2₹5.2 LRejected-Finance VPO TAKARIA TEHSIL AMB DISTT UNA HP | ₹5.2 L | L-2 | Rejected-Finance Bidder quoated AHOGHER abIDDER QUOTED A HIGHER RATE THEN l-1. |
| 3 | L-3₹5.3 LRejected-Finance VILL BADAUN PO ANDORA LOWER TEH AMB DISTT UNA HP | UNA | HIMACHAL PRADESH | ₹5.3 L | L-3 | Rejected-Finance Bidder quoated AHOGHER abIDDER QUOTED A HIGHER RATE THEN l-1. |
Tender Value
₹4.9 L
EMD Value
₹4,887
Closing Date
22 Dec 2025, 10:00 amClosed
Sr. Executive Engineer
Sr. Executive Engineer ED HPSEBL Amb
1. Tender for Prov. Fault Path Indicator on 11 kV Chururu feeder , prov. addional poles in lengthy spans underneath existing 11 KV Amb local feeder for system strengthing and improvement of ground clearance at various places, Replacement of existing
2025_HPSEB_123624_1
AED/132/2025-26
Open Tender
Electrical Works
90 days
Sr. Executive Engineer ED HPSEBL Amb
Please refer a tender document.
2 documents required · 2 mandatory
₹590
₹4,887
23 Apr 2026
16 Dec 2025
22 Dec 2025
16 Dec 2025
22 Dec 2025
16 Dec 2025
ERECTION PART .
Add Erection charges for FPI
Add Transportation charges
Supply Part
Fault Path Indicator (7kV - 69kV) {Clipon Type)
Handheld Device for Setting and Manual Reset
ERECTION PART of HT line
Erection of ST Single Pole 9 Mtr. Long:- Digging of Pit fixing of insulator and drilling of holes in X-Arm , Bracing Set, Top Clamp, errection of pole, fixing of barbed wire and danger plate, filling of Pit and ramming, painting of poles complete in all respect.
Erection of S.T Double Pole 9 Mtr. Long:- Digging of Pit fixing of insulator and drilling of holes in X-Arm , Bracing Set, Top Clamp, errection of pole, fixing of barbed wire and danger plate, filling of Pit and ramming, painting of poles complete in all respect.
Erection of Earthing Set HT:- Fixing of earthing pipe of pit for coal earthing, fixing of G.I wire to system filling of pit and remaning work complete in all respect.
Erection of Stay Set HT:- Digging of Pit fixing of Stay Rod, filling of Pit, Nozeiling & Tightning complete in all respect.
Stringing and sagging conductor:- Laying of conductor stringing and sagging, binding with insulator complete in all respect.
Transportation / Mannual carriage of material at destination site.
Supply Part of HT Line
Prov. STP Pole 9 mtr long. ( Qty.:- 9 , Unit :- No. Provided by HPSEBL)
Prov. RCC Muff with Concrete Filling. ( Qty.:- 9 , Unit :- No. Provided by HPSEBL)
Cross Arm: [Channel Iron (100x50x6 mm), Length: 1500 mm
Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures
Pole Top Bracket [MSCI:100x50x6 mm- 100 mm]
X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No.
X-Arm (Horizontal) - MS Channel Iron C type: 100X50x6, Length: 2340 mm x 2 No.] Δ Formation
Stay set complete in all respect (4No. / Dead Structure & 2 No./Run Thro.)
Stay Wire (7/3.15 mm) (10 kg Per Stay Set) . ( Qty.:- 90 , Unit :- Kg Provided by HPSEBL)
HT Earthing set complete
Eye Hook for earth wire
Half clamps
Full clamps:
11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure .
Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps,straight stapples & Bend Stapples etc.) x (3 No. conductors ) x (2 No. sides)
Danger Plate (250X200X1.6 mm) .
Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ
Barbed Wire
Aluminium Paint.
ERECTION PART of 3-Ph LT line
Erection of LT line. Digging of pit, errection of PCC pole 8/9 mtr.long, errection of C.I X-arm, Shakle insulators, D-iron and filling of pit and remming etc complete in all respect.
Erection of stay Set.:- Digging of pit of stay, fixing of stay rod, noziling and tightening and filling of pit ramming etc.complete in all respect.
Earthing:- Digging of pit, fixing of G.I wire to the earthing system and filling of pit and raiming etc.complete in all respect.
Laying of conductor:- Laying of conductor, striging, sagging and biding with insulator with 7/3.15 mm Conductor line length = 0.752 kms 3-Ph. complete in all respect.,
G.I Wire:- Laying of GI wire stringing and sagging and biding with hock etc. complete in all respect.
LT Line
Prov. STP Pole 9 mtr long ( Qty.:- 6, Unit :- No. Provided by HPSEBL)
Prov. RCC Muff with Concrete Filling. ( Qty.:- 6, Unit :- No. Provided by HPSEBL)
Prov. AAAC Conductor 7/3.15 mm i/c 3% cutting, wastage & sagging. ( Qty.:- 0.752 Unit :- Kms Provided by HPSEBL)
Prov. G.I.Wire No.8 SWG for earth ( 1.02 kms ). ( Qty. - 38 Kg, Provided by HPSEBL)
Prov.M S C.I- X-Arm ( 75X40X 4.8) 1.50 Mtr. + 0.2 Mtr long
Prov.MS Half Clamp (M.S FLATE 50X6mm)
Prov.MS Full Clamp (M.S FLATE 50X6mm)
Prov.Nut-Bolts in kg.
Prov.Shackle Insulators 16 kn with M.S.D-Iron
Prov. Egg. Insulator.
Prov.Earth Knob.
Prov.L.T. Stay Set complete in all respect
Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) ( Provided By HPSEBL . Qty. - 36 KG. )
Prov.L.T. Earthing set complete in all respect.
Prov.PVC Spacer
Aluminium Paint.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.87 MB
Bid132.rar
Tender Documents • 9.85 MB
BOQ_181537.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid