Supply and Installation of Child Play Equipments in Keshav Puram Zone under CMDF Funds for various locations of Parks in Municipal Corporation of Delhi

SUPPLY & INSTALLATION OF SQUARE DECK WITH CANOPY 5’: 3 NOS. MAIN PILLAR PIPES MADE UP OF 80 MM NB "B" CLASS G.I. PIPES. HEIGHT : 1.5 MTR FROM GL SQUARE DECK WITH CANOPY 3’: 1 NOS. MAIN PILLAR PIPES MADE UP OF 80 MM NB "B" CLASS G.I. PIPES. HEIGHT : 1.0 MTR FROM GL SWINGING BRIDGE : 1 NOS. 60MM NB G.I. PIPE USED FOR MAIN STRUCTURE. 1.3MTR W X 3.0 MTR LX1.5 MTR HT WAVE SLIDE(1.5 M) : 1 NOS. WAVE SLIDES MADE UP OF FIBER REINFORCE PLASTIC MATERIAL . 3.0 MTR LENGTH X 0.5 MTR WIDTH SPIRAL SLIDE(1.5 M) : 1 NOS. SPIRAL SLIDE MADE UP OF FIBRE REINFORCED PLASTIC MATERIAL HEIGHT : 2.1 MTR AND 4.0 MM THICK STEPLADDER : 1 NOS. STEP LADDER MOLDED WITH FIBRE REINFORCED MATERIAL. 0.4 MTR L X1.0MTR W X1.0 MTR HT ROCK CLIMBER : 1 NOS. ROCK CLIMBER MADE UP OF FIBRE REINFORCED PLASTIC MATERIAL. LENGTH 1.8 MTR AND WIDTH 1.0 MTR BRIDGE : 1 NOS. PLAIN BRIDGE MADE UP OF FIBER REINFORCE PLASTIC MATERIAL. 2.4X1.0X0.15MTR (LXWXH). NET CLIMBER : 1 NOS. MAIN PILLAR PIPES MADE UP OF 32 MM NB "B" CLASS G.I. PIPES. 1.5 MTR HT . SLIDE ENTRY : 1 NOS. SLIDES ENTRY MADE UP OF FIBER REINFORCE PLASTIC MATERIAL . 0.9MTR X0.25MTR X 0.9MTR(LXWXHT) STRUCTURE BUILD WITH CO2 WELDING PROCESS WITH CONTROLLED PARAMETERS. FIBER REINFORCE PLASTIC MOULDINGS WITH RESIN, COLOR PIGMENT CSM MAT. POWDER COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF ARCH SWING. LEG SUPPORT : 80 MM NB PIPE, SEAT- ANTI SKID RUBBER BELT. BEARING : HEAVY DUTY BALL BEARING. AREA : 3.0 M X 2.5 M. HEIGHT : 2.5 M. TOP BAR : 60 MM NB PIPE. SUSPENSION : 6 MM RUBBER COATED CHAIN. THE TOPCOAT IS DULY POWDER COATED. IN THIS ONE CHILD CAN ENJOY THE SWING AT ONE TIME. THE ARCH SHAPED SIDE FRAME SHALL BE MADE OF 80MM NB B CLASS GI PIPE SHALL BE MADE UP OF 50MM NB B CLASS GI PIPE. THE FRAME SHALL BE POWDER COATED TO GIVE AN AESTHETIC LOOK. THE SWING SHALL BE MADE UP OF 10MM THICK ANTI SKID RUBBER TOP THE RUBBER BELT SEAT / U SHAPE SWING SEAT WITH 2 EYE BOLT TYB-S06. MADE OF POLYURETHANE OF SIZE：53 X 20.5 X 20 SHALL BE SUSPENDED ON 6MM RUBBER COATED GI CHAIRN. THE BAIL BEARINGS SHALL BE MOUNTED INSIDE A SPECIALLY DESIGNED NYLON CLAMP. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF STD. SEE SAWHANDLE :-20 MM N B PIPE. LEVER-32 MM N B PIPE. COLMUN : 60 MM N B PIPE. BEARING : NYLON BUSH PRESS FITTED. SEATS: FRP SEATS WITH STEEL FRAME. THE TOPCOAT IS DULY POWDER COATED. THE LEVEL OF SEE SAW SHALL BE MADE FROM 15, 20 AND 25MM NB B CLASS GI PIPE. THE SEAT OF SEE SAW SHALL BE MADE FROM FRP/LLDPE. THE STAND AND BUSH BEARING MADE IN 40MM NB B CLASS GI PIPE. SEE SAW LEVER SHALL BE WELDED TO 5MM THICKNESS MS PLATE FOR NUT BOLTING WITH STAND. ALL PIPES FLAT SHALL BE POWDER COATED TO AVOID RUSTING. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE)C37C40C41C39 (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF ZIG ZAG BALANCE BEAM:LENGTH 4M X WIDTH 101.6 MM X HEIGHT 457.2 MM NB "B" CLASS G.I. PIPES. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF SIGN BOARDS OF 0.91 X 0.61M SIZE WITH SUPPORT LENGTH OF 3000 MM. MANUFACTURING, SUPPLYING AND FIXING OF RETRO REFLECTIVE SIGN BOARDS MADE OF 2 MM THICK ALUMINUM SHEET FACE TO BE FULLY COVERED WITH HIGH INTENSITY ENCAPSULATED TYPE HEAT ACTIVATED RETRO REFLECTIVE SHEETING CONFORMING TO TYPE – IV OF ASTM-D 4956-01 IN GREEN AND SILVER WHITE INCLUDING SUBJECT MATTER, MESSAGE (BILINGUAL(, SYMBOL AND BORDERS ETC AS PER IRC: 67-2001, PASTED ON SUBSTRATE BY AN ADHESIVE BACKING WHICH SHALL BE ACTIVATED BY APPLYING HEAT AND PRESSURE CONFORMING TO CLASS -2 OF ASTM-D-4956-01 AND FIXING THE SAME WITH SUITABLE SIZED ALUMINUM ALLOY RIVETS @ 20 CM C/C TO BACK SUPPORT FRAME OF M.S ANGLE IRON OF SIZE 35X35X5 MM AND M.S FLAT OF 25X5 MM ALONG WITH THEFT RESISTANT MEASURES, MOUNTED AND FIXED WITH 2 NOS. CLAMP OF MLS FLATS OF SIZE 25X5 MM TO A VERTICAL POST OF 3 MTR HEIGHT MADE UP OF MSL PIPE OF 60 MM N.B WELDED WITH TWO HOLD FAST OF M.S ANGLE 25X25X3MM OF 30CM LENGTH EACH AT BOTTOM AND INCLUDING MAKING HOLES IN PIPES, ANGLES, PROVIDING & FIXING M.S MESSAGE PLATE OF REQUIRED SIZE, STEEL WORK TO BE PAIRED WITH TWO OR MORE COATS OF SYNTHETIC ENAMEL PAINT OF REQUIRED SHADE AND OF APPROVED BRAND AND MANUFACTURE OVER A PRIMING COAT OF ZINC CHROMATE YELLOW PRIMER (VERTICAL POST TO BE PAINTED IN BLACK/WHITE/GREY COLOR) BACKSIDE OF ALUMINUM SHEET TO BE PAINTED WITH TWO OR MORE COATS OF EPOXY PAINT OVER AN APPROPRIATE PRIMING COAST INCLUDING ALL LEADS AND LIFTS ETC. COMPLETE AS PER DRAWING, SPECIFICATION (AS PER DIRECTION OF OFFICER IN CHARGE.)